Quarry School

Definition 2: a point on the terminal side

Subject: MathematicsLeans on: Squaring negativesLeans on: Signed divisionLeans on: Positive square rootLeans on: Division by zero
Level 2 · BuildingAbout 21 min read12 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Think of a map with your home at (0, 0), the origin.

    Rule

    r = x2+y2 > 0. sin θ = yr, cos θ = xr, tan θ = yx (x ≠ 0), cot θ = xy (y ≠ 0), sec θ = rx (x ≠ 0), csc θ = ry (y ≠ 0).

    Step

    1. Write down x and y with their signs.

    2. Find r = x2+y2 and simplify the root. r is always positive.

    3. sin θ = yr and cos θ = xr: reduce, then rationalize.

    4. tan θ = yx and cot θ = xy: r is not involved.

    5. sec θ = rx and csc θ = ry: the flips of cos and sin.

    6. Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.

    Question

    The terminal side of an angle θ in standard position passes through the point P(-6, -9). Find the exact values of sin θ, cos θ, tan θ, cot θ, sec θ and csc θ. Simplify every square root and leave no square root in a denominator.

    Answer

    sin θ = -31313, cos θ = -21313, tan θ = 32, cot θ = 23, sec θ = -132, csc θ = -133

    Trap

    Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.

    Strategy

    1. Check that the point is not the origin and keep both coordinate signs.

    2. Compute the positive distance r from the squared coordinates.

    3. Before dividing, identify which of x and y are zero.

    4. Use each coordinate ratio; write undefined whenever its denominator is zero.

    5. Reduce and rationalize; check signs from the coordinates and check sin2θ + cos2θ = 1.

    Term

    Right triangle

    Definition

    A triangle with one 90° corner. The other two angles are acute and add up to 90°.

    Term

    Acute angle

    Definition

    An angle greater than 0° and less than 90°, narrower than a square corner.

    Term

    Pythagorean theorem

    Definition

    In a right triangle with legs a and b and hypotenuse c, a2 + b2 = c2. It finds a missing side.

    Term

    Reciprocal

    Definition

    The flip of a nonzero number: 1 divided by it. A number times its reciprocal is 1. Zero has no reciprocal.

    Term

    Identity

    Definition

    An equation that is true for every value of the variable where both sides are defined.

    Term

    Pythagorean identity

    Definition

    sin2θ + cos2θ = 1. Dividing by nonzero cos2θ gives tan2θ + 1 = sec2θ; dividing by nonzero sin2θ gives cot2θ + 1 = csc2θ.

    Term

    sin2θ

    Definition

    Shorthand for (sin θ)2: find the sine, then square it. It does not mean sin(θ2).

    Term

    Standard position

    Definition

    An angle with its vertex at the origin and its initial side along the positive x-axis.

    Term

    Terminal side

    Definition

    The ray where an angle ends after its rotation. The point definition reads a point on it.

    Term

    Quadrant

    Definition

    One of the four regions the axes cut the plane into, numbered I, II, III, IV counterclockwise from the upper right.

    Term

    r (distance to the origin)

    Definition

    The distance from the origin to P(x, y): r = x2+y2. It is positive when P is not the origin; the origin has distance zero.

    Term

    Undefined

    Definition

    No value exists, because the formula would divide by zero.

    Term

    Domain

    Definition

    All the inputs a function accepts. sin and cos accept every angle; tan and sec skip angles on the y-axis; cot and csc skip angles on the x-axis.

    Term

    Origin

    Definition

    The coordinate address (0, 0), where the two axes cross.

    Term

    Radius

    Definition

    The distance from a circle’s center to any point on the circle.

    Term

    Angle θ

    Definition

    θ is a Greek letter used as the name of an angle. α, β, γ and δ are other angle names.

    Term

    Function

    Definition

    A rule giving exactly one output for each allowed input. Trigonometric functions take angle inputs and produce numerical ratios.

    Term

    Perfect square

    Definition

    A nonnegative whole number obtained by squaring a whole number. Its square root is a whole number.

    Term

    Factor

    Definition

    A number or expression multiplied by another to make a product. A common factor multiplies the whole numerator and denominator.

    Term

    Ratio

    Definition

    A comparison of one quantity with another by division. The order says which quantity is on top.

    Term

    Leg

    Definition

    Either of the two sides meeting at the right angle of a right triangle. Each is shorter than the hypotenuse.

    Term

    Perpendicular

    Definition

    Meeting at a right angle, exactly 90°.

    1 In plain words

    Think of a map with your home at (0, 0), the origin. An address P(x, y) tells you how far right or left to walk, then how far up or down. The straight route home has positive length r. To describe an angle such as 120°, put its corner at home and start its rotation pointing right. This is standard position. Its ending ray is the terminal side. Choose any address on that ray except home. Sine compares the up-down coordinate with r, and cosine compares the left-right coordinate with r. Coordinates can carry minus signs even though distance cannot. That extends the triangle ratios to every angle.

    Explain it like I am five

    Picture a map with home at (0, 0), the origin. The address P(−15, 8) means walk 15 blocks left, then 8 up. Those numbers are coordinates, signed distances, not the axes: x = −15 is negative because it points left, y = 8 positive because it points up.

    Put θ in standard position: corner at home, starting side pointing right, and a positive angle turning counterclockwise, against a clock's hands. Its terminal side, the ray (half-line) where the turn stops, runs from home through P. The distance home is r = (−15)2+82 = 225+64 = 289 = 17. A distance is never negative, and you never pick home, so r > 0.

    Why sine uses y: for an angle under 90°, dropping a line from P to the x-axis makes a right triangle whose up-down leg y is opposite θ and sideways leg x is adjacent. So sin θ = yr and cos θ = xr. Larger angles keep them, signs included: sin θ = 817, cos θ = −1517, tan θ = yx = −815.

    2 Picture it

    xyθx = −2.5y = 6rP(−2.5, 6)Ox = −2.5 (2.5 left) y = 6 (6 up) r = √42.25 ≈ 6.5the ray from O through P (and beyond) = the terminal side
    The point P(−2.5, 6) and its right triangle on the x axis.

    Reminder

    Reminder: Squaring negatives, Signed division, Positive square root, Division by zero
    • Squaring negatives. (−5)2 = (−5) × (−5) = 25. Keep parentheses around a negative coordinate before squaring.
    • Signed division. A positive over a negative is negative: 8−6 = −43. Two negatives give a positive ratio.
    • Positive square root. 169 = 13. Although z2 = 169 has two solutions, a distance selects the positive one.
    • Division by zero. 04 = 0 because 0 × 4 = 0. 40 has no value because no number times 0 gives 4.

    3 Why

    For an acute angle, drop a perpendicular from P to the x-axis. The resulting right triangle has adjacent leg x, opposite leg y and hypotenuse r. The fractions therefore agree with the triangle definition. A positive enlargement multiplies x, y and r by the same factor, which cancels in every ratio, so choosing another point on the same ray changes nothing. Larger angles keep the signed coordinates. Pythagorean distance gives r = x2+y2; because the origin is excluded, r > 0. A zero x or y remains possible, so check each denominator.

    4 The rule

    r=x2+y2>0.

    sinθ=yr,cosθ=xr,tanθ=yx (x≠0), cotθ=xy (y≠0), secθ=rx (x≠0), cscθ=ry (y≠0).

    The same idea, five ways

    Say it

    Say sine is y over r and cosine is x over r. Say r is the positive distance to the origin.

    Write it

    A point other than the origin (0, 0) on an angle's terminal side supplies its six signed coordinate ratios.

    In math
    • P(x,y)≠(0,0),r=x2+y2>0
    • sinθ=yr,cosθ=xr
    • tan θ = yx, sec θ = rx, x ≠ 0
    • cot θ = xy, csc θ = ry, y ≠ 0
    Like

    A signed map address and the positive straight route home.

    See it
    xyθx = −2.5y = 6rP(−2.5, 6)Ox = −2.5 (2.5 left) y = 6 (6 up) r = √42.25 ≈ 6.5the ray from O through P (and beyond) = the terminal side
    The same picture again: The point P(−2.5, 6) and its right triangle on the x axis.

    The same idea, other ways

    As a signed map address

    Coordinates tell direction: negative x means left, negative y means down. Distance tells length, so r stays positive. Write the coordinate signs before you calculate.

    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    Four right and five down gives a negative y but a positive distance.
    As an enlarged photograph

    Moving from (−5, 12) to (−10, 24) doubles the signed coordinates and the distance, from 13 to 26. Every numerator and denominator doubles, so the fractions agree.

    (−5,12),r=13

    (−10,24),r=26

    1213=2426

    As the old triangle on a map

    For an acute angle, x is adjacent, y is opposite and r is hypotenuse. Signed coordinates let the same formulas continue when the angle no longer fits inside a right triangle.

    xyθx = 4y = 3rP(4, 3)Ox = 4 (4 right) y = 3 (3 up) r = 5the ray from O through P (and beyond) = the terminal side
    In this positive-coordinate example, the map legs are the triangle's adjacent and opposite sides.
    As checking the bottom first

    Each function asks for a division. Its denominator decides whether an answer exists. For P(0, −4), r is 4: sine divides by 4, but tangent would divide by 0.

    12 ÷ 3 = 412 ÷ 2 = 612 ÷ 1 = 1212 ÷ 0 = ?0 groups: nowhere to put them, so no answer
    No number multiplied by zero can give a nonzero numerator.
    Why the squared identity still holds with signs

    For any non-origin point, r > 0 and r2 = x2 + y2. The definitions give sin θ = yr and cos θ = xr. Squaring and adding gives y2r2 + x2r2 = y2+x2r2 = r2r2 = 1. Negative coordinate signs disappear when squared, so the same Pythagorean identity holds in every direction.

    r2 = x2 + y2, with r > 0

    sin2θ+cos2θ=y2+x2r2

    r2r2=1

    FunctionDomain (θ in radians)Undefined when
    sin θ, cos θAll real θ: −∞ < θ < ∞, or (−∞, ∞)Never: the point you chose (never the origin) has r > 0.
    tan θ, sec θθ ≠ π2 ± nπ, equivalently θ ≠ π2 + nπ, with n any integer; in degrees θ ≠ 90° + n·180°Terminal side on the y-axis: x = 0 and cos θ = 0.
    cot θ, csc θθ ≠ ± nπ, equivalently θ ≠ nπ, with n any integer; in degrees θ ≠ n·180°Terminal side on the x-axis: y = 0 and sin θ = 0.

    Part 1: r (distance to the origin)

    Coordinates are directions and lengths combined. A negative coordinate sends you left or down. The straight route back to the origin is a length, so find it from squared coordinates and take the positive root.

    • Rule: exclude P(0, 0).
    • Rule: r = x2+y2 > 0.
    • Rule: only positive scaling keeps a point on the same terminal ray.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The legs are 4 and 5 long even though the signed y-coordinate is −5.

    Worked example

    Find the radius from a signed point

    Find the distance from the origin to P(4, −5). In words, turn the signed address into two positive leg lengths.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The slanted length is 41.
    1. x2=16 and y2=25.A negative times a negative is positive.
    2. r=16+25=41.The Pythagorean theorem gives the straight distance; keep the positive root.
    Answer
    r=41
    Double-check Squaring 41 gives 41, equal to the sum of the two squared leg lengths.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: r = 4 + 5 = 9.
    Adding legs gives the walking route, not the straight distance.
    ✓ Instead: The straight route is 42+52 = 41.

    Tips and tricks

    • Square the coordinates before adding them.

    Part 2: Sine from y and r

    Use the map address to compare up-down position with straight distance. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.

    • Rule: sin θ = yr.
    • When it works: always, because r (the distance from the origin to your point) is never 0 for every point except the origin.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 4 times now: The point P(4, −5) and its right triangle on the x axis.

    Worked example

    Sine from y and r: one address

    For P(4, −5) on a terminal side, find sin θ. In words, compare up-down position with straight distance.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 5 times now: The point P(4, −5) and its right triangle on the x axis.
    1. r=42+(−5)2=41.Distance uses the squared coordinates and the positive root.
    2. sinθ=yr=−541.Sine compares the signed y-coordinate with positive r, so this value is negative.
    3. −541=−54141=−54141.Multiply top and bottom by 41; its square gives a rational denominator of 41.
    Answer
    sinθ=−54141
    Double-check Its reciprocal csc θ = −415 gives a product of 5×4141×5 = 1 with the sine. The negative signs cancel, agreeing with the reciprocal identity.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sin θ = 54141 for P(4, −5).
    This drops the negative y-coordinate. A positive radius does not erase the numerator's sign.
    ✓ Instead: sinθ=−54141.

    Tips and tricks

    • The sine follows y because its denominator is positive.

    Part 3: Cosine from x and r

    Use the map address to compare left-right position with straight distance. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.

    • Rule: cos θ = xr.
    • When it works: always, because r (the distance from the origin to your point) is never 0 for every point except the origin.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 6 times now: The point P(4, −5) and its right triangle on the x axis.

    Worked example

    Cosine from x and r: one address

    For P(4, −5) on a terminal side, find cos θ. In words, compare left-right position with straight distance.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 7 times now: The point P(4, −5) and its right triangle on the x axis.
    1. r=42+(−5)2=41.Distance uses the squared coordinates and the positive root.
    2. cosθ=xr=441.Cosine compares the signed x-coordinate with positive r; both are positive.
    3. 441=44141.Multiply top and bottom by 41, whose square is 41.
    Answer
    cosθ=44141
    Double-check Its reciprocal sec θ = 414 gives a product of 4×4141×4 = 1 with the cosine.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: cos θ = −54141 for P(4, −5).
    That uses y over r, which is sine. Cosine uses the x-coordinate 4.
    ✓ Instead: cosθ=44141.

    Tips and tricks

    • The cosine follows x because its denominator is positive.

    Part 4: Tangent from y and x

    Use the map address to compare up-down position with left-right position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.

    • Rule: tan θ = yx.
    • It only works when x ≠ 0: x is on the bottom, and you cannot divide by 0.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 8 times now: The point P(4, −5) and its right triangle on the x axis.

    Worked example

    Tangent from y and x: one address

    For P(4, −5) on a terminal side, find tan θ. In words, compare up-down position with left-right position.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 9 times now: The point P(4, −5) and its right triangle on the x axis.
    1. x=4≠0 and y=−5.Tangent's denominator is x, so this address permits the division.
    2. tanθ=yx=−54=−54.Compare signed rise with run; a negative over a positive is negative. Tangent does not need r.
    Answer
    tanθ=−54
    Double-check Use the quotient identity as a second route: −541 ÷ 441 = −54, because the equal nonzero bottoms cancel.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: tan θ = −45 for P(4, −5).
    That reverses y and x and gives cotangent.
    ✓ Instead: tanθ=−54=−54.

    Tips and tricks

    • Opposite coordinate signs give a negative tangent.

    Part 5: Cotangent from x and y

    Use the map address to compare left-right position with up-down position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.

    • Rule: cot θ = xy.
    • It only works when y ≠ 0: y is on the bottom, and you cannot divide by 0.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 10 times now: The point P(4, −5) and its right triangle on the x axis.

    Worked example

    Cotangent from x and y: one address

    For P(4, −5) on a terminal side, find cot θ. In words, compare left-right position with up-down position.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 11 times now: The point P(4, −5) and its right triangle on the x axis.
    1. y=−5≠0 and x=4.Cotangent's denominator is y, so this address permits the division.
    2. cotθ=xy=4−5=−45.Compare signed run with rise; a positive over a negative is negative. Cotangent does not need r.
    Answer
    cot θ = −45
    Double-check tan θ = −54, so cot θ × tan θ = (−45) × (−54) = 1. Both are defined because x and y are nonzero.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: cot θ = −54 for P(4, −5).
    That reverses x and y and gives tangent.
    ✓ Instead: cot θ = 4−5 = −45.

    Tips and tricks

    • Use x over y directly, including when tangent has no value.

    Part 6: Secant from r and x

    Use the map address to compare straight distance with left-right position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.

    • Rule: sec θ = rx.
    • It only works when x ≠ 0: x is on the bottom, and you cannot divide by 0.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 12 times now: The point P(4, −5) and its right triangle on the x axis.

    Worked example

    Secant from r and x: one address

    For P(4, −5) on a terminal side, find sec θ. In words, compare straight distance with left-right position.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 13 times now: The point P(4, −5) and its right triangle on the x axis.
    1. r=42+(−5)2=41.Distance comes from squared coordinates and is positive.
    2. secθ=414.Secant is distance over x. Here x = 4 ≠ 0, and the root is already on top, so no rationalization is needed.
    Answer
    sec θ = 414
    Double-check cos θ = 441, so sec θ × cos θ = 414 × 441 = 1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sec θ = 441 for P(4, −5).
    That is cosine. Secant uses the distance over x, the reciprocal order.
    ✓ Instead: sec θ = 414.

    Tips and tricks

    • The secant has the same sign as the nonzero cosine.

    Part 7: Cosecant from r and y

    Use the map address to compare straight distance with up-down position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.

    • Rule: csc θ = ry.
    • It only works when y ≠ 0: y is on the bottom, and you cannot divide by 0.
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 14 times now: The point P(4, −5) and its right triangle on the x axis.

    Worked example

    Cosecant from r and y: one address

    For P(4, −5) on a terminal side, find csc θ. In words, compare straight distance with up-down position.

    Show the steps and the answer
    xyθx = 4y = −5rP(4, −5)Ox = 4 (4 right) y = −5 (5 down) r = √41.0 ≈ 6.4the ray from O through P (and beyond) = the terminal side
    The same picture, shown 15 times now: The point P(4, −5) and its right triangle on the x axis.
    1. r=42+(−5)2=41.Distance comes from squared coordinates and is positive.
    2. cscθ=41−5=−415.Cosecant is distance over y. Here y = −5 ≠ 0, so the positive distance divided by negative y gives a negative value.
    Answer
    csc θ = −415
    Double-check sin θ = −541, so csc θ × sin θ = (−415) × (−541) = 1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: csc θ = 415 for P(4, −5).
    The y denominator is −5, so its sign cannot be removed.
    ✓ Instead: csc θ = −415.

    Tips and tricks

    • The cosecant has the same sign as the nonzero sine.

    Part 8: Domains: all real inputs and the skipped axis families

    A domain is the list of inputs a function can accept. Sine and cosine divide by positive r, so every real angle works. Other functions divide by x or y and skip the angles where that coordinate is zero. There are infinitely many skipped angles because another half turn lands on the same axis.

    • Rule: sine and cosine have domain (−∞, ∞), also written −∞ < θ < ∞.
    • Notation: ∞ means without bound. It is not a real endpoint, so interval notation uses parentheses.
    • Rule: tan and sec exclude θ = π2 + nπ, or 90° + n·180°.
    • Rule: cot and csc exclude θ = nπ, or n·180°.
    • Notation: n is any integer, ..., −2, −1, 0, 1, 2, ... . The notes' ± notation lists the same families.
    • Rule: an original zero denominator means undefined, never zero.

    sin,cos:(−∞,∞)

    tan, sec: θ ≠ π2 + nπ

    cot, csc: θ ≠ nπ

    n is any integer

    Worked example

    Check an angle against an excluded family

    At θ = 7π2, which functions are undefined? In words, determine the final axis and see which denominators become zero.

    Show the steps and the answer
    7π/2terminal sideinitial side
    The terminal side is vertical, forcing x = 0.
    1. 7π2=π2+3π.This matches the tangent/secant excluded family with the integer n = 3.
    2. The terminal side is on the y-axis, so x=0 and y≠0.Each extra π is a half turn and stays on the same axis.
    3. Tangent yx and secant rx are undefined.Both have zero x in their denominator; the other four have nonzero r or y bottoms.
    Answer
    • tan 7π2: undefined
    • sec 7π2: undefined
    • The other four functions are defined.
    Double-check 7π2 − 2π = 3π2, a downward vertical direction; it again has x = 0.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Infinity is included as the last sine input.
    Infinity is not a real number and the real line has no last value.
    ✓ Instead: Write (−∞, ∞); every finite real angle is accepted.

    Tips and tricks

    • Identify the coordinate in the denominator, then identify the axis that makes it zero.

    5 How

    1. Write down x and y with their signs.
    2. Find r = x2+y2 and simplify the root. r is always positive.
    3. sin θ = yr and cos θ = xr: reduce, then rationalize.
    4. tan θ = yx and cot θ = xy: r is not involved.
    5. sec θ = rx and csc θ = ry: the flips of cos and sin.
    6. Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.

    Find signed trig values from a terminal point

    1
    Is P the origin (0, 0)?
    YesChoose a different point on the terminal side; r = 0 supplies no ratios.
    NoCompute r > 0.
    ↓
    2
    Is x = 0?
    YesTangent and secant are undefined; the other formulas still use their own denominators.
    NoTangent and secant can be evaluated.
    ↓
    3
    Is y = 0?
    YesCotangent and cosecant are undefined.
    NoCotangent and cosecant can be evaluated.
    ↓
    4
    Is a denominator an unsimplified nonzero root?
    YesReduce, then rationalize without changing the sign.
    NoKeep the reduced ratio.
    1. Check that the point is not the origin and keep both coordinate signs.
    2. Compute the positive distance r from the squared coordinates.
    3. Before dividing, identify which of x and y are zero.
    4. Use each coordinate ratio; write undefined whenever its denominator is zero.
    5. Reduce and rationalize; check signs from the coordinates and check sin2θ + cos2θ = 1.

    6 Worked example

    Worked example

    All six values from the point P(-6, -9)

    The terminal side of an angle θ in standard position passes through the point P(-6, -9). Find the exact values of sin θ, cos θ, tan θ, cot θ, sec θ and csc θ. Simplify every square root and leave no square root in a denominator.

    Show the steps and the answer
    P(-6, -9)−12−6612−12−8−44812
    The point P(-6, -9) and the line through the origin and P.
    1. Write the coordinates of P with their signs: x=-6,y=-9.Definition 2 works with any point (x, y) on the terminal side other than the origin. The minus signs stay attached to the numbers because they decide the signs of the answers.
    2. r=x2+y2=(-6)2+(-9)2=36+81=117=9·13=313.r is the distance from the origin to P, so it is the positive root, and squaring removes both minus signs. 9 is the largest perfect square that divides 117, so 117 = 9 · 13 = 313.
    3. sinθ=yr=-9313=-313=-313·1313=-31313. cosθ=xr=-6313=-213=-213·1313=-21313.Cancel the common factor 3 first so the numbers stay small. Then multiply by 1313, which equals 1, to clear the root from the denominator, since 13 · 13 = 13.
    4. tanθ=yx=-9-6=32 and cotθ=xy=-6-9=23.These two use only the coordinates, so r is not involved and no root appears. Both are defined because x = -6 ≠ 0 and y = -9 ≠ 0. A negative divided by a negative is positive, and the common factor 3 cancels.
    5. secθ=rx=313-6=-132 and cscθ=ry=313-9=-133.sec θ and csc θ are the flips of cos θ = -213 and sin θ = -313. With r on top, the root is already in the numerator, so after cancelling the 3 there is nothing to rationalize.
    6. Check each sign: r=313>0,x=-6<0,y=-9<0. sinθ,cosθ,secθ and cscθ each pair r with one negative coordinate, so all four are negative. tanθ and cotθ divide one negative coordinate by the other, so both are positive. The values found agree.A ratio is negative exactly when its numerator and denominator have opposite signs. r is always positive, so a ratio that uses r takes the sign of the coordinate in it.
    Answer
    sin θ = -31313, cos θ = -21313, tan θ = 32, cot θ = 23, sec θ = -132, csc θ = -133
    Double-check Rebuild P from r: r · cos θ = 313 · (-21313) = -6·1313 = -6 = x and r · sin θ = 313 · (-31313) = -9·1313 = -9 = y. Also sin2 θ + cos2 θ = (-313)2 + (-213)2 = 913 + 413 = 1, as it must be because x2 + y2 = r2. Each flip pair multiplies to 1: (-21313) · (-132) = 2·1313·2 = 1, (-31313) · (-133) = 3·1313·3 = 1 and 32 · 23 = 1.

    Work to write

    1. x = -6, y = -9
    2. r=(-6)2+(-9)2=117=313
    3. sinθ=-9313=-31313
    4. cosθ=-6313=-21313
    5. tanθ=-9-6=32
    6. cot θ = -6-9 = 23
    7. sec θ = 313-6 = -132
    8. csc θ = 313-9 = -133
    9. x < 0 and y < 0 with r > 0: sin, cos, sec, csc negative; tan, cot positive

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 5

    Positive coordinates and a whole-number distance

    P(4, 3) is on a terminal side. Find all six functions. In words, turn its positive address into six ratios.

    Show the steps and the answer
    xyθx = 4y = 3rP(4, 3)Ox = 4 (4 right) y = 3 (3 up) r = 5the ray from O through P (and beyond) = the terminal side
    All coordinates and the distance are positive.
    1. r=16+9=5.Square the coordinates, add and take the positive root.
    2. sin=35,cos=45,tan=34.Use yr, xr and yx.
    3. cot=43,sec=54,csc=53.Use xy, rx and ry; none of these bottoms is zero.
    Answer
    • sin=35
    • cos=45
    • tan=34
    • cot = 43
    • sec = 54
    • csc = 53
    Double-check The squared sine and cosine sum to 925 + 1625 = 1.

    Rung 2 of 5

    One negative coordinate and reducible ratios

    P(−6, 8) is on a terminal side. Find all six functions. In words, keep the negative x while reducing the six ratios.

    Show the steps and the answer
    xyθx = −3y = 4rP(−3, 4)Ox = −3 (3 left) y = 4 (4 up) r = 5the ray from O through P (and beyond) = the terminal side
    This half-sized point lies on the same ray as (−6, 8).
    1. r=36+64=10.The negative coordinate squares to a positive number.
    2. sin=810=45,cos=−610=−35,tan=8−6=−43.Substitute with signs, then reduce.
    3. cot=−68=−34,sec=10−6=−53,csc=108=54.The reciprocal ratios keep their coordinate signs.
    Answer
    • sin=45
    • cos=−35
    • tan=−43
    • cot = −34
    • sec = −53
    • csc = 54
    Double-check The half-sized point (−3, 4) has distance 5 and gives exactly the reduced ratios.

    Rung 3 of 5

    A large point and a small equivalent point

    P(9, −12) is on a terminal side. Find all six functions. In words, find the distance and reduce ratios without dropping the negative y.

    Show the steps and the answer
    xyθx = 4.5y = −6rP(4.5, −6)Ox = 4.5 (4.5 right) y = −6 (6 down) r = √56.25 ≈ 7.5the ray from O through P (and beyond) = the terminal side
    Half of (9, −12) fits the drawing and keeps the same ray.
    1. r=81+144=225=15.Squares erase the coordinate signs; distance uses the positive root.
    2. sin=−1215=−45,cos=915=35,tan=−129=−43.Use yr, xr and yx and divide common factors.
    3. cot=−34,sec=53,csc=−54.Use xy, rx and ry with the original signs.
    Answer
    • sin=−45
    • cos=35
    • tan=−43
    • cot = −34
    • sec = 53
    • csc = −54
    Double-check Divide both coordinates by 3 to obtain (3, −4), whose distance is 5; its six ratios match.

    Rung 4 of 5

    Two negatives and an irrational distance

    P(−5, −7) is on a terminal side. Find all six functions. In words, preserve both negative coordinates and rationalize the ratios with r on the bottom.

    Show the steps and the answer
    xyθx = −2.5y = −3.5rP(−2.5, −3.5)Ox = −2.5 (2.5 left) y = −3.5 (3.5 down) r = √18.5 ≈ 4.3the ray from O through P (and beyond) = the terminal side
    The picture uses half of (−5, −7) to show the same signed ray.
    1. r=25+49=74.Distance stays positive, and 74 has no perfect-square factor above 1.
    2. sin=−774=−77474,cos=−574=−57474.Multiply top and bottom by 74 to rationalize.
    3. tan=−7−5=75,cot=−5−7=57.Two negatives give a positive ratio.
    4. sec=74−5=−745,csc=74−7=−747.A positive distance over a negative coordinate gives a negative value.
    Answer
    • sin=−77474
    • cos=−57474
    • tan=75
    • cot = 57
    • sec = −745
    • csc = −747
    Double-check sin2 + cos2 = 4974 + 2574 = 1; tangent and cotangent alone are positive because they divide two negative coordinates.

    Rung 5 of 5

    A zero coordinate changes which values exist

    P(0, −4) is on a terminal side. Find all six functions. In words, check every bottom before deciding whether to write a value or undefined.

    Show the steps and the answer
    xyθx = 0y = −4rP(0, −4)Ox = 0 (0 right) y = −4 (4 down) r = 4the ray from O through P (and beyond) = the terminal side
    The point has x = 0, so only fractions with x on the bottom fail.
    1. r=02+(−4)2=4.The point is not the origin, so its distance is positive.
    2. sin=−44=−1 and cos=04=0.Their denominator r is nonzero; a zero numerator gives zero.
    3. tan=−40 and sec=40 are undefined.These two divide by x = 0.
    4. cot=0−4=0 and csc=4−4=−1.Their denominator y is nonzero.
    Answer
    • sin=−1
    • cos = 0
    • tan: undefined
    • cot = 0
    • sec: undefined
    • csc = −1
    Double-check sin2 + cos2 = 1 + 0 = 1. Direct denominator checks distinguish the two zeros from the two undefined values.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: For a point left of the origin, r is negative.
    Left is a direction encoded by x. Distance is length and is never negative.
    ✓ Instead: For P(−5, 12), r = 13 while x = −5.
    ✗ Not this: P(0, 0) works because it lies on every terminal side.
    It has r = 0, making sine and cosine divide by zero; it cannot define the ratios.
    ✓ Instead: Pick a point other than the origin (0, 0) on the requested ray.
    ✗ Not this: P(−4, −3) is interchangeable with P(4, 3).
    Those points lie on opposite rays. Only a positive scale factor preserves the same terminal side.
    ✓ Instead: Use points reached by multiplying both coordinates by the same positive number.
    ✗ Not this: A zero numerator and a zero denominator both mean the answer is zero.
    Zero over a nonzero number is 0; dividing by zero has no value.
    ✓ Instead: 04 = 0, while 40 is undefined.

    Tips and tricks

    • Write x, y and r separately before forming any fractions.
    • Check denominators before rationalizing; no rewriting repairs division by zero.
    • Choose a small convenient point on the same ray when the problem lets you.
    • Read signs directly from the coordinate fractions here; the next sign lesson collects them into a quadrant table.
    • Read reference tables by columns: keep the input label and its output in the same vertical column.

    7 The trap

    Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.

    Keep in mind

    • r is a distance, so it is always positive: for P(−9, −12), r = 81+144 = 15, never −15.
    • Every minus sign in an answer comes from x or y: for P(−15, 8), cos θ = −1517 is negative because x is negative.
    • Any point on the same ray gives the same six values: P(−30, 16) has r = 34 and sin θ = 1634 = 817, the same as P(−15, 8).
    • A zero coordinate can still put a 0 on the bottom: for P(0, 5), tan θ = 50 is undefined.

    Memory hook

    Alphabetical: c comes before s as x comes before y, so cosine takes x and sine takes y: cos θ = xr, sin θ = yr.

    Flash cards

    Say the answer out loud, then flip.

    What is standard position?
    The angle's corner sits at the origin, its starting side points right along the positive x-axis, and positive angles turn counterclockwise.
    What is the terminal side of an angle?
    The ray where the turn stops. With a point P given, it is the ray from the origin through P.
    What is r, and can it be negative?
    The distance from the origin to P, r = x2+y2. It is always positive.
    P(−24, −7) is on the terminal side of θ. Find r, sin θ and cos θ.
    • r=576+49=25
    • sinθ=−725
    • cosθ=−2425
    Why is sin θ = yr and not xr?
    For an angle under 90°, y is the leg opposite θ and r is the hypotenuse, so SOH gives yr.
    P(−7, −24) is on the terminal side. Is r = −25?
    No. r = 49+576 = 25. A distance is always positive, and the minus signs stay in x and y.

    Comes back in