Absolute value functions: crash course
about 23 min to listen10 lessons17 questions to tryUnit 6 of 17
Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.
Starts here no skill from another unit needed first
1 Absolute value measures distance
The rule
when ; when x < 0.
Nonnegative means zero or positive. Opposite means the same distance from zero on the other side: the opposite of is 7. Always , and exactly when . A piecewise function chooses one instruction according to the input: use the first line for zero or positive inputs, the second for negative inputs.
How
- Calculate the entire expression inside the bars without changing its individual signs.
- If the result is zero or positive, keep it.
- If it is negative, use its opposite, the positive number the same distance from zero.
- Finish outside operations afterward. A number beside the bars multiplies: 3|x + 2| means 3 × |x + 2|.
Worked example
Worked example
Calculate first, measure second
Find |−3 − 4| and then −|−3 − 4|.
What it asks. Find the value of the first expression, then find its opposite in the second expression.
Show the steps and the answer
The plan. Keep the subtraction inside unchanged. Calculate its result, measure the distance, and apply the outside minus sign last.
- Plan. Keep the subtraction inside unchanged. Calculate its result, measure the distance, and apply the outside minus sign last.
- The first minus sign is part of the input −3. The second asks you to subtract 4.
- An outside minus sign acts after the bars.
- .Starting three blocks left and moving four more left puts you at −7.
- .The location −7 is seven blocks from zero.
- .The minus sign outside the bars acts after the distance has been found.
The trap
Making individual numbers positive before finishing the inside changes the problem. In |−3 + 5|, the wrong calculation |3 + 5| gives 8; the correct inside is 2, so the answer is 2. In |2 − 9|, changing subtraction to addition gives 11; the correct inside is −7, so the answer is 7.
2 Distance from a center and tolerance
The rule
Distance between two real numbers A and B is .
Here A and B name the two positions. For an allowed distance from center c, at most r means , with ends and included. Strictly less than r means , with the ends excluded. Exactly r means . At least r means . More than r means . The sign is read plus or minus: names the lower limit and upper limit . If , the two end positions coincide at c; an exact zero distance has only that one position.
How
- Choose a letter for the actual value, such as x, a resistance R, a score S, or a temperature T. Identify the center c.
- Find the permitted distance r. For a percent tolerance, multiply the size of the stated rating by the percent divided by 100.
- Read the words carefully. At most, no more than, and ends included use an equality bar under the comparison. Strictly less than and strictly more than leave the end out.
- Write |actual value − center|, then the comparison and distance.
- Locate the two positions c − r and c + r. Nearby means the stretch between them. Farther away means the left side or the right side beyond them. Exactly that distance means the two end positions.
- Keep the units. Use a closed, filled dot or a bracket for an included end; use an open, hollow dot or a parenthesis for an excluded end.
Worked example
Worked example
A resistor's permitted resistance
A resistor has nominal resistance 680 ohms, ±5%. Express its allowable actual resistance R using absolute value and an interval.
What it asks. Find how far the measured resistance may depart from 680, and write all the allowed values.
Show the steps and the answer
The plan. Convert five percent to an allowed distance. Walk that distance below and above 680, including both ends.
- Plan. Convert five percent to an allowed distance. Walk that distance below and above 680, including both ends.
- Nominal value is the stated rating. Actual value is the measured number.
- ±5% permits the same percentage below and above the rating.
- Let R be the actual resistance in ohms. The center is 680 ohms.R names the measurement that varies, while 680 is the fixed rating.
- 5% .Percent means out of one hundred.
- ; then ohms.Five hundredths of 680 is the permitted distance from the rating.
- Write .The distance from the actual measurement to its rating can be at most 34 ohms.
- The lower end is . The upper end is .Walking 34 units either way from the center finds the two furthest allowed values.
- Write , or the interval [646, 714].Every value between these limits is close enough, and the equals bar includes both limits.
- 646 ≤ R ≤ 714 ohms
- Interval: [646, 714] ohms
The trap
The center and permitted distance have different jobs. In |R − 680| ≤ 34, 680 names the rating, while 34 says how far the measurement may depart from it.
Quick check
Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 6
Strictly less than half a unit
Describe all numbers less than 0.5 from 12.
What it asks. Find nearby positions with the two maximum-distance ends excluded.
Show the steps and the answer
The plan. Locate 12 minus and plus 0.5, then keep positions strictly between them.
- Plan. Locate 12 minus and plus 0.5, then keep positions strictly between them.
- Less than leaves out equality.
- Half a unit is 0.5.
- Write .The distance must be smaller than the stated half unit.
- The end positions are and .These are exactly half a unit from the center.
- Keep 11.5 < x < 12.5, or (11.5, 12.5).The two ends have distance exactly 0.5 and must be left out, while every position between them is nearer.
- 11.5 < x < 12.5
- Interval: (11.5, 12.5)
3 Build and read the V graph
The rule
For with : a is the number multiplying the distance, h is its horizontal center, and k is the outside added height.
Vertex: (h, k). Left slope: ; right slope: a. It opens up if a > 0 and down if a < 0. Domain: all real numbers. Range: if a > 0; if a < 0.
How
- Set the entire inside equal to 0 and solve. This finds the input where its distance is zero, the corner's x-coordinate.
- Put that input into the full formula to find the corner's y-coordinate, then plot the corner.
- Choose one and two units on each side. Substitute all four inputs into the full formula, especially when a number multiplies x inside the bars.
- Draw an input and output table, plot its five points, connect each side with a straight arm, and extend the arms.
- Read domain as the graph's reach across the x-axis and range as its reach up the y-axis. For a limited input stretch, check both ends and the corner if it lies inside.
Worked example
Worked example
Move and stretch the parent graph
Graph f(x) = 2|x − 3| + 4. Give its vertex, arm slopes, domain, and range.
What it asks. Draw the V and describe its turning point, the steepness of each arm, and all allowed inputs and outputs.
Show the steps and the answer
The plan. Find the corner by making the inside zero. Calculate four surrounding points, then use their heights to read the arms and range.
- Plan. Find the corner by making the inside zero. Calculate four surrounding points, then use their heights to read the arms and range.
- Only the distance part is doubled. Add 4 afterward.
- The column under 3 contains the corner height 4.
- Set and add 3 to find . Then , so the vertex is (3, 4).Zero distance marks where the left and right instructions meet. Substituting that input finds the corner height.
- At and , so .Positions equally far from the center have equal outputs.
- At and , so .The two-step distance gives a doubled distance height of 4, followed by the upward shift 4.
- Use the five columns of the output table to plot the points. Connect each arm with a straight line.Each side uses a straight-line instruction, and the shared corner connects them.
- From (2, 6) to (3, 4), go 1 right and 2 down, giving slope . From (3, 4) to (4, 6), go 1 right and 2 up, giving slope 2.Slope is change in height divided by change across. These changes are −2 ÷ 1 and 2 ÷ 1.
- The domain is , and the range is .The formula accepts every real input. The lowest height is 4 and the arms rise without an upper limit.
- Vertex: (3, 4).
- Left slope: −2.
- Right slope: 2.
- Domain: (−∞, ∞).
- Range: [4, ∞).
The trap
Reading x − 3 as a left shift. Find where the inside is zero: x − 3 = 0 gives x = 3, so the corner moved right. The memory device is 'inside lies, outside tells the truth'; the zero calculation explains it.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
Stretch and shift
Graph y = 3|x − 1| − 2.
What it asks. Draw the V and find its turning point and output heights.
Show the steps and the answer
The plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- Plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- The corner occurs at zero inside distance.
- Each table column gives one plotted point.
- Set and add 1 to get . Then .This finds and verifies the corner (1, −2).
- One unit away, . Two units away, .The factor 3 triples each distance height before subtracting 2.
- Plot all five table columns. The left arm drops 3 per step right and the right arm rises 3 per step right.Distance shrinks toward the corner and grows away from it, so the slopes are −3 and 3.
- Vertex: (1, −2)
- Left slope: −3
- Right slope: 3
- Domain: (−∞, ∞)
- Range: [−2, ∞)
4 Write an equation from a graph
The rule
Vertex form is .
From vertex (h, k) and another point (p, q) with : , where horizontal distance . For an upward V, width at height D above the corner is , with D > 0. An x-intercept, or horizontal intercept, is a point (x, 0); its input is called a zero.
How
- Read the corner from the grid: its horizontal position is h and its height is k.
- Write f(x) = a|x − h| + k, leaving the stretch factor a unknown.
- Read another clear point (p, q). Go to the x-axis to read p and to the y-axis to read q.
- Subtract the corner height k from q and divide by the horizontal distance |p − h|. This finds the stretch factor a.
- Put the resulting a into the formula and check it at a second point.
- For a requested x-intercept, find where the drawing reaches height 0. Algebraically, set the output to 0 to find its input. A positive distance from h has one position on each side, h minus that distance and h plus it.
Worked example
Worked example
Read a V from its picture
Write the equation of the V in the picture and find its x-intercepts.
What it asks. Read the turning point and steepness from the grid, then identify where the graph has height zero.
Show the steps and the answer
The plan. Locate the corner, count a one-step rise, write the formula, check another point, and find ground-level positions.
- Plan. Locate the corner, count a one-step rise, write the formula, check another point, and find ground-level positions.
- The lowest point is the corner. Read horizontal position first and height second.
- One step right from the corner reveals a when the rise is readable.
- The lowest point reads , so and . Write .The V turns where its distance part is zero; its grid address gives both shifts.
- From the corner move 1 right to . The graph height is 0, which is above the corner. Thus .The stretch factor measures height change per unit of distance from the corner.
- Write .The corner and one-step height have supplied all three numbers in vertex form.
- Check the point (1, 2): .Another readable point must agree with the formula, including on the left arm.
- Set the output to zero: . Add 2, then divide by 2 to get .A horizontal intercept has height zero. Undoing the outside operations identifies its required distance from 3.
- A distance of 1 from 3 occurs at or . Equivalently, or .The distance picture places one input on each side of the center.
- At height , the graph meets and . Its width is , and that height is above the corner.For a second steepness check, compare widths at a fixed height above the corner. The parent V is 8 wide at height 4 above its corner, so this V is half as wide and twice as steep.
- Zeros: x = 2 and x = 4
- x-intercepts: (2, 0) and (4, 0)
The trap
Dividing by p − h instead of |p − h|. A point left of the corner has a negative coordinate difference, but its distance is positive. Keep the bars so a correctly records whether the V opens up or down.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
The graph opens down
Find a V with vertex (4, 6) passing through (0, 4).
What it asks. Find the formula of the V from its corner and the supplied information.
Show the steps and the answer
The plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- Plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- The corner supplies both shifts.
- Divide the height change by horizontal distance, which is positive.
- .The corner fixes center 4 and height 6.
- Insert (0, 4): .The given point lies four units horizontally from the corner.
- Subtract 6: . Divide by 4: .The height change is a fall of 2 over distance 4. Dividing those numbers finds the signed stretch factor.
5 Solve an absolute value equation
The rule
Isolate first.
For B > 0, solve or . For , solve . For B < 0, there is no solution. These give two, one, or no inputs when mx and . Check every input in the original equation.
How
- Get the bars and their complete contents alone. Undo addition or subtraction outside first, then multiplication or division.
- Name A, everything inside the bars, and B, the number on the other side. Inspect B before splitting.
- For B > 0, write A = B or A = −B. For B = 0, write only A = 0. For B < 0, stop with no solution.
- Solve each possible equation by undoing the inside operations. This finds the inputs that produce the required inside values.
- Substitute each possible answer into the original equation. Keep only inputs that make both sides equal.
- Write the answer as inputs and as a set. {−7, 3} lists two answers. {4} lists one answer. ∅ means the empty set, no answers, and can also be written { }. Braces collect answers; a comma separates them.
Worked example
Worked example
Isolate before choosing directions
Solve 3|x + 2| − 4 = 11.
What it asks. Find every x that makes the left side equal 11, then write those inputs as a set.
Show the steps and the answer
The plan. Undo minus 4, then times 3 outside the bars. Solve two equations for the whole inside and check both inputs.
- Plan. Undo minus 4, then times 3 outside the bars. Solve two equations for the whole inside and check both inputs.
- The outside operations are times 3, then minus 4. Undo them in reverse order.
- After isolation, |x + 2| = 5 means x + 2 equals 5 or −5.
- A positive distance has a left position and a right position.
- Add 4 to both sides: , so .This removes the outside subtraction while keeping the sides equal.
- Divide both sides by 3: .Division cancels the outside multiplication. Now B, the number on the other side, is the true distance 5.
- Write or .The complete inside must be one of the two numbers whose absolute value is 5.
- In the first equation subtract 2 from both sides: .This finds the input that produces inside value 5.
- In the second equation subtract 2 from both sides: .This finds the input that produces inside value −5. Both possible directions must be checked.
- Substitute 3 and into the original equation and keep both. Write .Both give original left side 11, so both inputs belong to the answer set.
- x = −7 or x = 3
- Set: {−7, 3}
The trap
Splitting before isolating, or keeping only the positive branch. In 3|x + 2| − 4 = 11, the needed distance is 5, not 11. Box the isolated equation, then choose its branches.
Quick check
Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.
Try it · level 4 of 8
A number multiplying x inside
Solve |2x − 6| = 8.
What it asks. Find every x whose whole inside 2x − 6 has distance 8 from zero.
Show the steps and the answer
The plan. Write the inside equal to 8 and −8, then solve and check each equation.
- Plan. Write the inside equal to 8 and −8, then solve and check each equation.
- A is 2x − 6, not x alone.
- Add 6, then divide by 2, in both branches.
- Write or .B = 8 > 0, so the complete inside has two possible values.
- In the first equation add 6 to both sides: .This removes the inside subtraction while keeping both sides equal.
- Divide by 2: .This finds the input that makes the inside 8.
- In the second equation add 6: .This removes the same subtraction for the other possible direction.
- Divide by 2: .This finds the input that makes the inside −8.
- x = −1 or x = 7
- Set: {−1, 7}
6 Find zeros and axis intercepts
The rule
Zeros: solve to find the inputs whose output is zero.
Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In with : opposite signs for a and k give two x-intercepts; gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.
How
- For zeros or x-intercepts, set the output f(x) equal to 0. This asks which inputs place the graph on the horizontal axis.
- Isolate the bars. Inspect B, the number on the other side, to determine whether two, one, or no inside equations are possible.
- Solve each possible equation to find the zero inputs. Substitute each input into the original formula to confirm output 0.
- List zeros as numbers or an answer set. List x-intercepts as points with y-coordinate 0.
- For the y-intercept, substitute x = 0 into the original formula and calculate the output. Write the point (0, f(0)).
Worked example
Worked example
Find zeros and intercepts
Find the zeros and both kinds of axis intercepts of f(x) = |4x + 1| − 7.
What it asks. Zeros: the output is 0, so find every input that gives it. x-intercepts: write those zero-input points. y-intercept: the input is 0, so calculate the output.
Show the steps and the answer
The plan. Set the function equal to zero and solve the two inside equations. Then separately put input zero into the original function.
- Plan. Set the function equal to zero and solve the two inside equations. Then separately put input zero into the original function.
- Output zero and input zero are different instructions.
- Add 7 before splitting the inside.
- Use parentheses around a negative input during substitution.
- Set the output equal to 0: .This finds the inputs whose graph points lie on the horizontal axis.
- Add 7 to both sides: .This removes the outside subtraction and reveals positive B = 7.
- Write or .The complete inside can be either of the two numbers with absolute value 7.
- In the first equation subtract 1: . Divide by 4: .These steps find the input whose inside is 7. Dividing the fraction's top and bottom by 2 reduces it.
- In the second equation subtract 1: . Divide by 4: .These steps find the input whose inside is −7.
- Check both zero inputs in the original formula and write points and .Both substitutions give output 0, so both points are x-intercepts.
- For the y-intercept use input 0: .Points on the vertical axis have x-coordinate 0. This calculation finds the height there.
- Zeros: x = −2 and x =
- Zero set: {−2, }
- x-intercepts: (−2, 0) and (, 0)
- y-intercept: (0, −6)
The trap
Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
No crossing
Find all intercepts of f(x) = 2|x − 1| + 3.
What it asks. Determine whether the V reaches output zero, and find its output at input zero.
Show the steps and the answer
The plan. Set output zero and inspect the distance after isolation. Compute f(0) separately.
- Plan. Set output zero and inspect the distance after isolation. Compute f(0) separately.
- A negative isolated distance cannot occur.
- The y-intercept still exists even if there are no x-intercepts.
- Set output zero: . Subtract 3: .This asks which inputs reach the horizontal axis and removes the outside addition.
- Divide by 2: .This isolates the distance so its possibility can be checked.
- There are no zero inputs or x-intercepts: .A distance cannot equal −. Every original output is at least 3.
- Use x = 0 for the y-intercept: .This calculates the height over the vertical axis, where the input is zero.
- Zeros: none; zero set ∅
- x-intercepts: none
- y-intercept: (0, 5)
7 Less than B means between
The rule
For B > 0: |A| < B means ; means .
Both comparisons must hold: 'and'. A is everything inside the bars; B is the number on the other side.
How
- Get the bars alone, then check that B, the number on the other side, is positive. Zero or negative B needs the final lesson's cases.
- Write the three part inequality with −B on the left and B on the right. Keep equality if the question allows it.
- Undo each inside operation on all three parts. Dividing by a negative reverses both signs.
- Read the finished bounds from smaller to larger and write the interval.
- A strict sign excludes the endpoint: use a hollow dot and a parenthesis. An inclusive sign allows equality: use a filled dot and a bracket. Check the center and both endpoints in the original question.
Worked example
Worked example
A distance interval with included endpoints
Solve |x − 5| ≤ 4.
What it asks. Find every number that is four or fewer units from five.
Show the steps and the answer
The plan. Write the between chain, add five to all three parts, and show whether the two ends count.
- Plan. Write the between chain, add five to all three parts, and show whether the two ends count.
- The center is five. The distance limit B is four.
- Less distance requires both a left limit and a right limit.
- The equals bar means the endpoints count.
- Write .A signed difference whose distance is at most 4 must be at least −4 and at most 4.
- Add 5 to all three parts: .This undoes the subtraction from x while sliding both comparison limits by the same amount.
- Simplify: .−4 + 5 = 1, −5 + 5 = 0, and 4 + 5 = 9. This finds every input that passes both limits.
- Write [1, 9].At either end the distance equals 4, and the stated inequality allows equality.
- 1 ≤ x ≤ 9.
- Interval: [1, 9].
The trap
Changing only the middle of a three-part inequality, or treating < and ≤ alike. Every algebra move acts on all three parts, and the original sign decides whether the boundary belongs.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Include shifted endpoints
Solve |x + 3| ≤ 2.
What it asks. Find all positions at most two units from −3.
Show the steps and the answer
The plan. Use an inclusive between chain and subtract three from every part.
- Plan. Use an inclusive between chain and subtract three from every part.
- x + 3 is x − (−3), so the center is −3.
- The ends count.
- .The limit is positive and equality is allowed, so the inside lies from −2 through 2.
- Subtract 3 everywhere: .Subtracting 3 from all three parts isolates x, so these bounds describe the allowed input positions instead of the inside difference.
8 More than B means outside
The rule
For B > 0: |A| > B means or A > B; means or .
For an inside line with a nonzero number multiplying x, solve each alternative and join its two outside intervals with .
How
- Get the bars alone and inspect B, the number on the other side. Use this method when B is positive.
- Write the left outside inequality and the right outside inequality, connected by 'or'. Each alternative is a branch.
- Solve each branch separately. Multiplying or dividing by a negative flips that branch's comparison sign.
- Put the resulting intervals in order from left to right and join them with ∪.
- Infinity is a direction, not an actual endpoint, so it always uses a parenthesis. At each finite boundary, an actual number, use a bracket only when equality passes the original comparison.
Worked example
Worked example
Two outside solution intervals
Solve |2x + 1| > 7.
What it asks. Find every input for which 2x plus one is more than seven units from zero.
Show the steps and the answer
The plan. Write two outside alternatives, solve each, and join the two allowed intervals.
- Plan. Write two outside alternatives, solve each, and join the two allowed intervals.
- The right side B is positive seven.
- Use 'or', because either outside direction works.
- The divisor two is positive, so each comparison sign stays.
- Write or .An inside value more than seven units from zero must lie beyond one of the two signed boundaries.
- Left branch: subtract 1 to get .This removes the inside addition without changing order.
- Divide by 2: .The positive divisor leaves the sign unchanged and isolates every input passing the left alternative.
- Right branch: subtract 1 to get 2x > 6.The same subtraction removes the inside addition in the other alternative.
- Divide by 2: x > 3.This finds every input passing the right alternative.
- Write .Either alternative qualifies, and both finite boundaries fail the strict comparison.
- x < −4 or x > 3
- Interval: (−∞, −4) ∪ (3, ∞)
- Set-builder: {x : x < −4 or x > 3}
The trap
Using 'and' for an outside condition. No x can be both less than −4 and greater than 3. Use 'or', and use ∪ to keep both permitted pieces.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Shifted inclusive outside
Solve |x + 2| ≥ 3.
What it asks. Find all numbers at least three units from −2.
Show the steps and the answer
The plan. Use inclusive outside alternatives and subtract two in each.
- Plan. Use inclusive outside alternatives and subtract two in each.
- x + 2 measures from −2.
- Equality includes both boundaries.
- or .The distance includes the boundary and both farther sides.
- Subtract 2: or .Subtracting 2 from both sides of each branch undoes the + 2 inside the bars.
9 Use boundaries and graphs to find positive or negative outputs
The rule
Find boundaries by solving the corresponding equality.
Test one input inside each interval between boundaries, or compare graph heights. For f(x) < 0, choose the portions below the x-axis; for f(x) > 0, choose those above. Negative multiplication or division flips every comparison sign. Allow a boundary only when its original comparison permits equality.
How
- Decide which heights to compare, such as f(x) and 0, or |x − 5| and 4.
- Set the two heights equal and solve. This finds every input at which the graph reaches the comparison height. Substitute those inputs back to confirm the crossings.
- List the open intervals separated by those boundary inputs. Open means the boundary itself is not part of the interval being tested.
- Pick one test point inside each interval and substitute it into the original comparison.
- Keep every interval whose test point passes. Include a boundary only if substituting it into the original comparison passes too.
- State the allowed inputs as an inequality, interval, or set-builder condition. If more than one interval works, use 'or' and ∪.
Worked example
Worked example
A reflected function below zero
For f(x) = −|4x − 5| + 3, find where f(x) < 0.
What it asks. Find every input whose output from this downward V is below zero.
Show the steps and the answer
The plan. Get the bars alone, find the equality crossings, test the three intervals, and exclude the zeros.
- Plan. Get the bars alone, find the equality crossings, test the three intervals, and exclude the zeros.
- Subtract three before multiplying by negative two.
- The negative multiplier flips the less than sign.
- The first and third output columns are negative.
- Subtract 3 from : .This undoes the outside vertical shift before comparing the distance.
- Multiply both sides by : .−2 × (−) = 1 and −2 × (−3) = 6. The negative multiplier flips the comparison.
- To find the crossing boundaries, solve the equality .At distance 6 the original output is − × 6 + 3 = 0, exactly the comparison height.
- Write or .Only inside values −6 and 6 give distance 6.
- Add 5: or . Divide by 4: or .These operations undo the inside shift and multiplier to find both crossing inputs.
- Check the crossings: , and . Each gives .Substitution confirms that both boundary inputs actually meet the horizontal axis.
- Separate the inputs into , and .With every zero found, an output cannot change sign inside one of these intervals without another crossing.
- Left test : , so the inside table's column under holds . Its distance is 9. Then .Multiplying by negative one half gives −, and writing 3 as lets the halves subtract. The negative result selects the left interval.
- Middle test : . Then . Read the positive output in the column under 1.1 is between the exact boundaries, and its positive output rejects that entire middle interval.
- Right test : . Then . Read the negative output in the column under 3.3 is beyond the right boundary, and the negative result selects the right interval.
- Find the corner by setting : add 5 and divide by 4 to obtain . Substitute: .Zero inside identifies the V's turning input. Substitution gives its height and explains the graph's corner (, 3).
- Moving one unit farther from the corner changes by 4. The height change is .Factoring 4x − 5 = 4(x − ) gives the same function as −2|x − | + 3, so the picture's arms descend two units per step away.
- Keep the two outside intervals and leave their boundary inputs out.The outside tests are negative, while each boundary output equals zero and fails the strict question.
- x < − or x >
- Interval: (−∞, −) ∪ (, ∞)
- Set-builder: {x : x < − or x > }
The trap
Multiplying by −2 and keeping the less than sign would select the center, where this function is positive. Flip the sign immediately and confirm your answer with an actual output from each chosen interval.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Upward V below zero
Where is f(x) = |x − 2| − 3 negative?
What it asks. Find where the upward V lies below the horizontal axis.
Show the steps and the answer
The plan. Find its two crossings and test the middle and both outside intervals.
- Plan. Find its two crossings and test the middle and both outside intervals.
- Set output zero to find boundary inputs.
- The center lies in the middle interval.
- Set |x − 2| − 3 = 0 to find the crossings. Add 3: .Output zero marks the boundaries where the sign can change.
- Write or . Add 2: or .These are the only inside values at distance 3, so solving finds both boundary inputs.
- Check and .Both proposed boundaries really lie on the horizontal axis.
- Read the test columns: , and .The table shows a positive left sample, a negative middle sample, and a positive right sample.
- Keep .Only the middle interval has negative output, and its zero endpoints do not pass the strict comparison.
10 When B is zero or negative
The rule
If B < 0: , |A| < B, and have no solution; |A| > B and hold for every allowed input.
If : and mean ; |A| < 0 has none; |A| > 0 means ; holds for every allowed input.
How
- Get the absolute value alone. In an inequality, negative multiplication or division flips the sign. In an equation, equality remains equality.
- Inspect B, the number on the other side, after that isolation.
- If B is negative, equality or a smaller distance is impossible. A greater distance accepts every allowed input.
- If B is zero, decide whether the sign requires equality, excludes zero distance, or allows every nonnegative distance.
- For a required zero distance, solve A = 0 to find the center input. Substitute it back to confirm distance zero. For positive distance, exclude exactly the inputs where A = 0.
- If B is positive, use two equations for equality, between for a smaller distance, or outside for a greater distance. Check the answer in the original problem.
Worked example
Worked example
A negative coefficient hides a zero limit
Solve −2|x − 6| + 4 ≥ 4, and then solve −2|x − 6| + 4 > 4.
What it asks. For the same function, first find inputs with output at least four. Then find inputs with output strictly greater than four.
Show the steps and the answer
The plan. Undo the outside addition and negative multiplier in each comparison, then inspect whether the distance can be at most zero or below zero.
- Plan. Undo the outside addition and negative multiplier in each comparison, then inspect whether the distance can be at most zero or below zero.
- Dividing by negative two reverses either comparison.
- At most zero allows distance zero.
- Below zero allows no distance.
- For the first condition, subtract 4: .This undoes the outside addition before inspecting the isolated distance.
- Divide by −2: .The negative divisor changes the at least comparison into an at most comparison.
- Set x − 6 = 0 and add 6: .A nonnegative distance at most zero must equal zero, so this finds the only center input.
- Substitute x = 6 into the original: .The result confirms that this input passes the first inclusive comparison.
- For the second condition, subtract 4: .The outside addition is removed in the same way, but the comparison remains strict.
- Divide by : .Negative division changes greater than into less than.
- There is no solution to the second condition.No distance can be below zero, so no input can make the original output exceed four.
- For output at least 4: x = 6
- Set for that answer: {6}
- For output greater than 4: no solution
- Set for that answer: ∅
The trap
Using the formulas for B positive before checking the isolated limit. |x − 6| > −2 is true for every real x, so it does not need a pair of boundary equations.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Every distance beats a negative limit
Solve |2x − 1| ≥ −3.
What it asks. Find all inputs whose distance expression is at least negative three.
Show the steps and the answer
The plan. Use nonnegative distance instead of splitting into two branches.
- Plan. Use nonnegative distance instead of splitting into two branches.
- Zero is already greater than negative three.
- The inside expression is defined for every real input.
- .All values of the bars are nonnegative.
- Every real x satisfies the condition.The linear expression is defined at every real input.
11 Quick checks for the whole unit
Quick check 1 of 8
Solve |x| = 7.
Show the steps and the answer
- x = −7 or x = 7
- set {−7, 7}, because both positions are seven units from zero.
Quick check 2 of 8
Solve |x + 5| = −2.
Show the steps and the answer
- No solution
- set ∅, because an absolute value cannot be negative.
Quick check 3 of 8
Solve |x − 1| < 3.
Show the steps and the answer
- −3 < x − 1 < 3 gives −2 < x < 4.
- Interval: (−2, 4).
- Reason: strictly closer than three means between with both ends excluded.
Quick check 4 of 8
Solve |x| ≥ 5.
Show the steps and the answer
Quick check 5 of 8
For f(x) = −|x + 2| + 6, give the corner and opening direction.
Show the steps and the answer
- Corner: (−2, 6).
- Opening: down.
- The inside is zero at −2, leaving height 6, and the negative multiplier lowers height as distance grows.
Quick check 6 of 8
Why does multiplying −|A| < −3 by −2 give |A| > 6?
Show the steps and the answer
Quick check 7 of 8
Find the y-intercept of f(x) = 2|x − 3| − 2.
Show the steps and the answer
Quick check 8 of 8
Solve |2x − 1| > −4.