Quarry School

Power functions and polynomial functions: crash course

about 28 min to listen6 lessons14 questions to tryUnit 12 of 17

Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.

Starts here no skill from another unit needed first

1 Power functions

about 5 minOpen the full lessonOnly this lesson

The rule

A power function is f(x) = kxp, where k is a fixed number other than 0 and p is a fixed number.source 1

The graph families below use whole-number powers p (0, 1, 2, 3, ...). Polynomial vocabulary later compares these with negative and fractional powers.
For a whole-number p: if p is even, f(−x)=f(x): the inputs x and −x give the same output, and the graph mirrors across the y-axis. If p is odd, f(−x)=−f(x): x and −x give opposite outputs, and the graph looks the same after a half turn around (0, 0).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = 2x3, match the power-function form f(x) = kxp: k = 2 is the number in front and p = 3 is the power. The 2 multiplies x3; it is not part of the power.
  2. Use the odd-power rule: p = 3 is odd, so opposite inputs give opposite outputs. Start from the shape of y = x3, because cubing a negative input keeps its minus sign.
  3. Use substitution and the order of operations to make the table. Cube each input before multiplying by 2: f(−2) = 2(−8) = −16, f(−1) = 2(−1) = −2, f(0) = 0, f(1) = 2 and f(2) = 16.
  4. Plot (−2, −16), (−1, −2), (0, 0), (1, 2) and (2, 16) and join them smoothly in the shape of y = x3. Each output is 2 times the output of x3 at the same input, so the graph is y = x3 stretched to twice the height.
  5. Check with the odd-power rule: the outputs at −2 and 2 are −16 and 16, and those at −1 and 1 are −2 and 2. Each pair is opposite. Also f(1) = 2 equals k, because 1 to any power is 1.

Worked example

Worked example

Reading and plotting f(x) = 2x3

For f(x) = 2x3, name k and p, say whether p is even or odd, find f(−2), f(−1), f(0), f(1) and f(2), and describe the graph. (Each f(number) asks: the input is that number; find the output.)

input xoutput f(x)−2−16−1−20012216
x:−2,−1,0,1,2;f(x):−16,−2,0,2,16.
Show the steps and the answer
input xoutput f(x)−2−16−1−20012216
The columns under 2 and −2 hold 16 and −16: opposite inputs give opposite outputs, as an odd power must.
(−2, −16)(−1, −2)(0, 0)(1, 2)(2, 16)−22−16−8816
The solid curve y = 2x3 runs through the five table points.
  1. k=2 and p=3.2x3 is one fixed number, 2, times x raised to the fixed whole-number power 3, with nothing added, so it is a power function of the form kxp.
  2. p=3 is odd, so expect the x3 family: opposite inputs give opposite outputs.3 is one pair and one left over, and the lone minus sign survives.
  3. f(2)=2·23=2·8=16.The input 2 goes in place of x; the power comes first, 2 · 2 · 2 = 8, then multiply by k = 2.
  4. f(1)=2·13=2·1=2.Every power of 1 is 1, so the output at 1 is k itself.
  5. f(0)=2·03=0.Any number of zeros multiplied together is 0, and 2 · 0 = 0.
  6. f(−1)=2·(−1)3=2·(−1)=−2.(−1)(−1) = 1 and 1 · (−1) = −1: three minus signs leave one over.
  7. f(−2)=2·(−2)3=2·(−8)=−16.(−2)(−2) = 4 and 4 · (−2) = −8; then a positive times a negative is negative.
  8. Write each output under its input in the table, and plot each column as a point: (−2,−16),(−1,−2), (0, 0), (1, 2), (2, 16).Each column of the table is one point: the input says how far across, the output how far up or down.
  9. Describe the graph: the shape of y=x3 with every height doubled, low on the left, flattening as it crosses (0, 0), high on the right.An odd p puts the curve in the x3 family, and k = 2 multiplies each output of x3 by 2: 8 becomes 16 and 1 becomes 2.
Answer
  • k = 2 and p = 3, an odd power
  • f(−2)=−16
  • f(−1)=−2
  • f(0) = 0
  • f(1) = 2
  • f(2) = 16
  • The graph: the shape of y = x3, stretched to twice the height
Double-check Second way, by the half-turn rule for odd powers: opposite inputs must give opposite outputs. In the table the columns under 2 and −2 hold 16 and −16, and the columns under 1 and −1 hold 2 and −2. Also 2x3 = x3 + x3, and at x = 2 that is 8 + 8 = 16, as found.

The trap

Letting the power grab the number in front. In f(x) = −3x2 the power 2 belongs to x alone. At x = 2, square first, 22 = 4, then multiply by −3 to get −12. Squaring −3 · 2 = −6 gives 36, which is the output of a different function, (−3x)2. Put the input in, do the power, and only then multiply by k.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Two powers of x multiplied (gotcha: the powers add)

For r(x) = 3x2 · x3, find k and p, say whether p is even or odd, and find r(2). (r(2) asks: the input is 2; find the output.)

Show the steps and the answer

x2·x3=(x·x)(x·x·x)

= x · x · x · x · x = x⁵

3x2·x3=3x⁵

  1. x2·x3=(x·x)(x·x·x)=x5.Two copies of x times three copies of x is five copies multiplied together.
  2. r(x)=3x5, so k=3 and p=5, which is odd.The formula is now one number times one power of x, and 5 is two pairs and one left over.
  3. 25=32.The power comes first: 2 · 2 · 2 · 2 · 2 = 32.
  4. r(2)=3·32=96.Then multiply by k = 3.
Answer
  • k = 3
  • p = 5, odd
  • r(2) = 96
Double-check Use the formula as first written: 3 · 22 · 23 = 3 · 4 · 8 = 96, the same. The gotcha: p is 2 + 3 = 5, not 2 · 3 = 6.

2 End behavior of a power function

about 4 minOpen the full lessonOnly this lesson

The rule

For f(x)=kxp with p=1, 2, 3, ...

and k≠0:
Right arm: k > 0 gives f(x)→∞ as x→∞; k < 0 gives f(x)→−∞ as x→∞.
Left arm: if p is even it matches the right arm; if p is odd it points the opposite way.

How

  1. For f(x) = −2x5, match f(x) = kxp: k = −2 and p = 5. The end-behavior rule applies because p is a positive whole number and k is not 0.
  2. Apply the right-arm rule first. k = −2 is negative, so as x → ∞, f(x) → −∞. The reason: a large positive input has a large positive fifth power, and multiplying by −2 makes it negative.
  3. Apply the left-arm rule. p = 5 is odd, so the left arm points the opposite way from the right arm: as x → −∞, f(x) → ∞. The reason: a large negative input has a large negative fifth power, and multiplying by −2 makes it positive.
  4. Write the answer in arrow notation, one line for each direction of x. In arrow notation, x → ∞ means the input moves far to the right without stopping, and f(x) → −∞ means the outputs drop without stopping. So: as x → −∞, f(x) → ∞ (left arm up), and as x → ∞, f(x) → −∞ (right arm down).
  5. Check by substitution: f(10) = −2 · 100,000 = −200,000 and f(−10) = −2 · (−100,000) = 200,000. Their signs agree with the two end rules. These values check the arithmetic; the rules describe what happens as inputs grow without bound.

Worked example

Worked example

Both arms of f(x) = −2x5

Describe the end behavior of f(x) = −2x5. Write it in arrow notation.

Show the steps and the answer
input xoutput f(x)−10200000−12001−210−200000↓ evaluate: input given, read the output below it
The column under −10 holds a large positive output and the column under 10 holds a large negative one.
  1. Say what the question asks: when the input x is very far to the right, do the outputs climb or drop? When x is very far to the left, do they climb or drop?End behavior means the far ends of the graph only. Nothing near the middle matters here.
  2. Match the function to f(x)=kxp: k=−2 and p=5.k is the number multiplying the power, with its sign. p is the exponent on x.
  3. Right arm first. k=−2 is negative, so as x→∞,f(x)→−∞.For a large positive x, x5 is a large positive number. Multiplying it by −2 gives a large negative number, since negative × positive = negative.
  4. Left arm next. p=5 is odd, so the left arm does the opposite of the right arm: as x→−∞,f(x)→∞.For a large negative x, x5 has five negative factors. Four of them pair off into positives and one is left over, so x5 is a large negative number. Then negative × negative = positive.
  5. Put the two lines together. In words: left arm up, right arm down.A full end behavior answer always has two statements, one for each direction of x.
Answer
  • As x → −∞, f(x) → ∞ (left arm up).
  • As x → ∞, f(x) → −∞ (right arm down).
Double-check Test one large input on each side, the two marked columns of the table. f(10) = −2 · 105 = −2 · 100,000 = −200,000, far below the x-axis, so the right arm is down. f(−10) = −2 · (−10)5 = −2 · (−100,000) = 200,000, far above the x-axis, so the left arm is up. Both match.

The trap

Reading −x4 as (−x)4. The power touches only x. The minus sign in front is k = −1 and is applied last. So −x4 has both arms down, while (−x)4 = x4 has both arms up. Before deciding anything, write k out with its sign: k = −1, k = −2, and so on.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A fraction in front

Describe the end behavior of f(x) = 12x5.

Show the steps and the answer
  1. Say what is asked: do the outputs climb or drop at each far end?That is the end behavior.
  2. Name the parts: k=12 and p=5.A fraction in front is still the number k.
  3. k=12 is positive, so the right arm goes up.Only the sign of k matters. Half of a huge positive number is still a huge positive number.
  4. p=5 is odd, so the left arm does the opposite and goes down.An odd power of a negative input is negative, and half of a negative number is negative.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → ∞.
  • Left arm down, right arm up.
Double-check f(10) = 12 · 100,000 = 50,000 and f(−10) = 12 · (−100,000) = −50,000. Positive on the right, negative on the left.

3 Polynomial vocabulary

about 4 minOpen the full lessonOnly this lesson

The rule

A polynomial is a sum of terms a·xn: each coefficient a is a real number and each power n is a whole number (0, 1, 2, 3, ...).

Standard form lists the powers from highest to lowest: f(x) = anxn + ... + a2x2 + a1x + a0, with an ≠ 0; every polynomial except 0 itself can be written this way. The degree is n, the highest power. The leading term is anxn. The leading coefficient is an.source 1 The constant term is a0. The zero polynomial, 0, has no degree and no leading term.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For g(x) = 4x2 − 9 + 3x5 − x, apply the polynomial definition. The powers of x are 2, 0, 5 and 1, all whole numbers, and each coefficient is real, so g is a polynomial. No brackets need multiplying out, and no two terms share a power of x, so nothing needs combining.
  2. Use the term and coefficient definitions. Keep each minus sign with its term: 4x2, −9, 3x5, −x have coefficients 4, −9, 3, −1. The term −x means −1 times x, and the constant −9 has power 0.
  3. Use the degree rule to choose the highest power with a nonzero coefficient: 5. Its term 3x5 is the leading term, and 3 is the leading coefficient. Position in the written formula does not determine the degree.
  4. Use standard form to reorder the terms from highest power to lowest: g(x) = 3x5 + 4x2 − x − 9. Addition allows this rearrangement when each term keeps its sign.
  5. Check the rearrangement term by term: the same four signed terms occur once each. Then substitute x = 2 into both orders: 4(2)2 − 9 + 3(2)5 − 2 = 16 − 9 + 96 − 2 = 101 and 3(2)5 + 4(2)2 − 2 − 9 = 96 + 16 − 2 − 9 = 101. Matching outputs support the check; keeping every signed term is what makes the two forms equal.

Worked example

Worked example

Naming every part of a polynomial written out of order

For g(x) = 4x2 − 9 + 3x5 − x, list the terms and their coefficients, then give the degree, the leading term and the leading coefficient, and write g in standard form. In plain words: break the formula into the pieces being added, find the piece with the highest power of x, and put the pieces in order from highest power to lowest.

Show the steps and the answer

g(x)=4x2−9+3x5−x

powers as written: 2, 0, 5, 1

highest power: 5

standard form: 3x5 + 4x2 − x − 9

  1. Rewrite every subtraction as adding a negative: g(x)=4x2+(−9)+3x5+(−x).Subtracting is the same as adding a negative, so each minus sign belongs to the term that follows it.
  2. Read off the terms: 4x2,−9,3x5 and −x. There are four terms.A term is one of the pieces being added.
  3. Read off the coefficients: 4, −9, 3 and −1.The coefficient is the number multiplying the power of x. −x means −1·x, and the constant −9 is its own coefficient.
  4. Write the power of x in each term: 2, 0, 5 and 1.x alone is x1. The constant −9 is −9·x0, since x0 = 1.
  5. Pick the largest power: 5. The degree is 5.The degree of a polynomial is the highest power of x that appears.
  6. The term carrying the power 5 is 3x5. That is the leading term, and its coefficient 3 is the leading coefficient.The leading term is chosen by its power, not by where it is written. Here it is the third term on the page.
  7. Write the terms from highest power to lowest: g(x)=3x5+4x2−x−9.Standard form lists the powers in falling order: 5, 2, 1, 0.
Answer
  • Terms: 4x2, −9, 3x5, −x
  • Coefficients: 4, −9, 3, −1
  • Degree: 5
  • Leading term: 3x5
  • Leading coefficient: 3
  • Standard form: g(x) = 3x5 + 4x2 − x − 9
Double-check Put x = 2 into both orders. As written: 4·4 − 9 + 3·32 − 2 = 16 − 9 + 96 − 2 = 101. Standard form: 96 + 16 − 2 − 9 = 101. The outputs match, so reordering changed nothing, and in standard form the first term is 3x5, the leading term found above.

The trap

The most common mistake is to take the first term on the page as the leading term, or to take the biggest number as the leading coefficient. In 5 + 2x − 3x4 the leading term is −3x4, not 5, and the leading coefficient is −3, sign included. Always find the highest power first. The order on the page and the size of the numbers decide nothing.

Quick check

Try it before you open its steps. It is question 5 of 9 in the full lesson, where they run from easy to exam-hard.

Try it · level 5 of 9

Two brackets

Expand q(x) = (2x + 3)(x − 4) and name its terms, coefficients, degree, leading term and leading coefficient. In plain words: multiply the brackets out into a sum, then name the pieces.

Show the steps and the answer
2x²−8x2x3x−12+3x−4
The two middle cells, −8x and 3x, are like terms and combine into −5x.
  1. Multiply each term of the first bracket by each term of the second: 2x·x=2x2,2x·(−4)=−8x,3·x=3x,3·(−4)=−12.Every term in one bracket multiplies every term in the other. These are the four cells of the picture.
  2. Add the products: 2x2−8x+3x−12.The product of the brackets is the sum of the four cells.
  3. Combine like terms: −8x+3x=−5x, so q(x)=2x2−5x−12.Both have x to the power 1, and −8 + 3 = −5.
  4. Terms: 2x2,−5x,−12. Coefficients: 2, −5,−12.Each minus sign belongs to the term that follows it.
  5. Highest power 2: degree 2, leading term 2x2, leading coefficient 2.All three are read from the term with the highest power.
Answer
  • Expanded form: q(x) = 2x2 − 5x − 12
  • Terms: 2x2, −5x, −12
  • Coefficients: 2, −5, −12
  • Degree: 2
  • Leading term: 2x2
  • Leading coefficient: 2
Double-check Put x = 2 into both forms. Factored: (4 + 3)(2 − 4) = 7·(−2) = −14. Expanded: 8 − 10 − 12 = −14. They match. The shortcut agrees: leading term times leading term is 2x·x = 2x2.

4 End behavior of a polynomial comes from its leading term

about 4 minOpen the full lessonOnly this lesson

The rule

If f(x)=anxn+ (terms with lower powers of x), where an≠0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y=anxn.source 1

n even, an>0: as x→−∞,f(x)→∞, and as x→∞,f(x)→∞ (both arms up).
n even, an<0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→−∞ (both arms down).
n odd, an>0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→∞ (left arm down, right arm up).
n odd, an<0: as x→−∞,f(x)→∞, and as x→∞,f(x)→−∞ (left arm up, right arm down).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = 50x2 − x3 + 100, use the degree rule to find the highest power, 3. The leading term is −x3 and its coefficient is −1, even though it is written in the middle.
  2. Apply the leading-term rule for end behavior. Use −x3 to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.
  3. Apply the power-function rules to −x3. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.
  4. Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.

Worked example

Worked example

A leading term hiding in the middle

Find the end behavior of f(x) = 50x2 − x3 + 100. In plain words: say where the graph goes far to the right and far to the left.

input xoutput f(x)−1001500100−106100104100100−499900
x:−100,−10,10,100;f(x):1500100,6100,4100,−499900.
Show the steps and the answer
input xoutput f(x)−1001500100−106100104100100−499900↓ evaluate: input given, read the output below it
The outputs under −100 and 100 have the signs the leading term −x3 predicts.
  1. Restate the question. As x→∞ (far right), does f(x) go to ∞ or to −∞? Then answer the same for x→−∞ (far left).End behavior is only about the two arms of the graph. It says nothing about the middle.
  2. List each term with its power of x: 50x2 has power 2, −x3 has power 3, and 100 has no x at all.The leading term is the term with the highest power, so every power has to be in view before choosing.
  3. Choose the leading term: −x3. The degree is 3 and the leading coefficient is −1.3 is the highest power present. A bare minus sign in front of x3 means the coefficient is −1.
  4. Set 50x2 and 100 aside for this question.Dividing shows who is bigger: 50x2 ÷ x3 = 50x. Once x passes 50 this is less than 1, and it keeps shrinking, so far out 50x2 is small beside x3. The 100 never grows at all.
  5. Right arm: the leading coefficient −1 is negative, so as x→∞,f(x)→−∞.A large positive number cubed is a large positive number, and multiplying by −1 makes it a large negative: −(1003) = −1,000,000.
  6. Left arm: the degree 3 is odd, so the left arm does the opposite of the right arm. As x→−∞,f(x)→∞.A negative number cubed stays negative, and −1 times a negative is positive: −(−100)3 = −(−1,000,000) = 1,000,000.
Answer
  • As x → −∞, f(x) → ∞ (left arm up).
  • As x → ∞, f(x) → −∞ (right arm down).
Double-check Second way: put large inputs into the whole formula, as in the table. Under 100: f(100) = 50 · 10,000 − 1,000,000 + 100 = −499,900, a large negative, so the right arm is heading down. Under −100: f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100, a large positive, so the left arm is heading up. Both agree with the answer. Now look at the column under 10: f(10) = 5,000 − 1,000 + 100 = 4,100, which is positive. Close to 0 the term 50x2 is still ahead, so a small test input would have pointed the right arm the wrong way.

The trap

Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

Quick check

Try it before you open its steps. It is question 5 of 10 in the full lesson, where they run from easy to exam-hard.

Try it · level 5 of 10

A product of brackets, multiplied out in full

Find the end behavior of q(x) = −2x(x − 3)(x + 4).

Show the steps and the answer
x²4xx−3x−12−3x+4
The four products of (x − 3)(x + 4): only the top-left cell, x times x, makes the highest power.
  1. Multiply the two brackets: (x−3)(x+4)=x2+4x−3x−12=x2+x−12.Multiplying out puts every term in view, which makes the leading term easy to read. The area picture shows the four products.
  2. Multiply by −2x: −2x·x2=−2x3,−2x·x=−2x2, and −2x·(−12)=24x. So q(x)=−2x3−2x2+24x.−2x multiplies every term inside, and a negative times a negative gives the positive 24x.
  3. Leading term: −2x3. Leading coefficient −2 (negative), degree 3 (odd).3 is the highest power in the multiplied-out form.
  4. Right arm down: as x→∞,q(x)→−∞. Left arm up: as x→−∞,q(x)→∞.Negative leading coefficient sends the right arm down, and odd degree makes the left arm do the opposite.
Answer
  • As x → −∞, q(x) → ∞.
  • As x → ∞, q(x) → −∞.
  • Left arm up, right arm down.
Double-check Use the original bracket form, which never passed through the expansion. q(10) = −20 · 7 · 14 = −1,960, negative. q(−10) = 20 · (−13) · (−6) = 20 · 78 = 1,560, positive. The expanded form agrees: −2,000 − 200 + 240 = −1,960 and 2,000 − 200 − 240 = 1,560.

5 Intercepts of a polynomial

about 5 minOpen the full lessonOnly this lesson

The rule

y-intercept: the point (0, f(0)).

When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c)=0. Zero product property: if A·B=0, then A=0 or B=0.

How

  1. For f(x) = 2x2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
  2. Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2x2 − 4x − 30 = 0. Pull out the common factor 2 to get 2(x2 − 2x − 15) = 0; distributing 2 gives back all three terms.
  3. Factor x2 − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so x2 − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: x2 − 5x + 3x − 15 = x2 − 2x − 15.
  4. Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
  5. Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.

Worked example

Worked example

Both kinds of intercept for f(x) = 2x2 − 4x − 30

Find the y-intercept and the x-intercepts of f(x) = 2x2 − 4x − 30.

Show the steps and the answer
input xoutput f(x)−418−30−2−140−302−304−1450618↑ solve: output given, read every input above it
The output is 0 in exactly two columns.
  1. Say what is asked. For the y-intercept: the input is 0, find the output. For the x-intercepts: the output is 0, find every input that gives it.The two questions set different things to zero, so they are two separate jobs.
  2. Put 0 in for x: f(0)=2(0)2−4(0)−30=0−0−30=−30. The y-intercept is (0,−30).Every point on the y-axis has x = 0. Each term that has an x becomes 0, so only the constant term −30 is left.
  3. Write the equation 2x2−4x−30=0.The graph meets the x-axis only where the output is 0.
  4. Pull the shared 2 out front: 2(x2−2x−15)=0.2 divides all three coefficients: 2, −4 and −30. Multiply back to test it: 2 · x2 = 2x2, 2 · (−2x) = −4x, 2 · (−15) = −30.
  5. Find two numbers that multiply to −15 and add to −2. They are 3 and −5.The product is negative, so the two signs differ. The sum is negative, so the number farther from 0 carries the minus. The pairs that make 15 are 1 with 15 and 3 with 5. Only 3 and −5 add to −2.
  6. Write the factored form: 2(x+3)(x−5)=0.Multiplying out confirms it: (x + 3)(x − 5) = x2 − 5x + 3x − 15 = x2 − 2x − 15, the bracket from the step before.
  7. Set each factor that contains x equal to 0. x+3=0 gives x=−3. x−5=0 gives x=5. The factor 2 is never 0, so it gives nothing.A product is 0 only when one of its factors is 0. These two small equations find every input that makes the output 0.
  8. Plug each value back into the original formula. f(−3)=2(9)−4(−3)−30=18+12−30=0. f(5)=2(25)−4(5)−30=50−20−30=0.Plugging back shows that each value really gives an output of 0. It uses the original formula, so it would catch a factoring mistake.
  9. Write the x-intercepts as points: (−3,0) and (5, 0).An intercept is a point on the graph, and on the x-axis the second coordinate is 0.
Answer
  • y-intercept: (0, −30)
  • x-intercepts: (−3, 0) and (5, 0)
Double-check Second way, from the factored form: putting 0 into 2(x + 3)(x − 5) gives 2 · 3 · (−5) = −30, the same y-intercept. In the table, the two 0s in the output row sit under the inputs −3 and 5, and the column for x = 0 holds −30. The leading term 2x2 says both arms point up, and a graph that sits at −30 when x = 0 with both arms up must meet the x-axis once on each side of 0, which matches −3 and 5.

The trap

The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.

Quick check

Try it before you open its steps. It is question 6 of 11 in the full lesson, where they run from easy to exam-hard.

Try it · level 6 of 11

A factor that is never 0

Find the y-intercept and the x-intercepts of f(x) = x4 − 16.

Show the steps and the answer
  1. Put 0 in for x: f(0)=0−16=−16. The y-intercept is (0,−16).The term with x becomes 0, leaving the constant term.
  2. Write x4−16=0. See it as a square minus a square: x4=(x2)2 and 16=42. Factor: (x2−4)(x2+4)=0.a2 − b2 = (a − b)(a + b) with a = x2 and b = 4.
  3. The first bracket is again a square minus a square: x2−4=(x−2)(x+2). So (x−2)(x+2)(x2+4)=0.x2 − 22 splits the same way. Keep factoring until no bracket can be split further.
  4. Set the first two brackets to 0: x−2=0 gives x=2, and x+2=0 gives x=−2.These find the inputs that make those brackets 0.
  5. Look at x2+4. It gives no x-intercept.x2 is never negative, so x2 + 4 is always 4 or more. It can never be 0.
  6. Plug back into the original: f(2)=16−16=0 and f(−2)=(−2)4−16=16−16=0.An even power of a negative number is positive, so (−2)4 = 16.
Answer
  • y-intercept: (0, −16)
  • x-intercepts: (2, 0) and (−2, 0)
Double-check Second way: put 0 into the factored form. (0 − 2)(0 + 2)(0 + 4) = (−2)(2)(4) = −16, matching the y-intercept. Also test x = 1 in both forms: 1 − 16 = −15, and (−1)(3)(5) = −15. The degree is 4 but there are only 2 x-intercepts. That is allowed: the degree is the most there can be, not a promise.

6 Turning points

about 5 minOpen the full lessonOnly this lesson

The rule

A turning point is a point where the graph changes from rising to falling (a peak) or from falling to rising (a valley), read left to right.source 1

A polynomial of degree n, where n is 1 or more, has at most n−1 turning points.source 1
Backward: a polynomial that is not constant and whose graph has t turning points has degree at least t+1.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. Use the turning-point definition on the graph described in the example. Read left to right: falling changes to rising at (−2, −13), rising changes to falling at (0, 3), and falling changes to rising at (2, −13). Count these direction changes, not the ends or a flat spot that keeps rising.
  2. Count t = 3 turns. Apply the bound t ≤ n − 1: 3 ≤ n − 1 gives n ≥ 4 after adding 1 to both sides. This is a lower bound, because a degree can allow more turns than a graph actually has.
  3. Use the end-behavior rule from the earlier lesson. Both ends point up, so the degree is even and the leading coefficient is positive. The smallest even degree allowed by the turn count is 4.
  4. Check that degree 4 can fit the stated shape with the example’s formula f(x) = x4 − 8x2 + 3. Its degree is 4 and its leading coefficient 1 is positive, so it allows at most 3 turns and both arms point up. Multiplying out (x2 − 4)2 − 13 gives x4 − 8x2 + 16 − 13 = x4 − 8x2 + 3, so f(x) = (x2 − 4)2 − 13. A square is never negative and is 0 only where x2 − 4 = 0, at x = −2 and x = 2, so the lowest outputs are −13 there. Between them, x2 − 4 runs from 0 down to −4 at x = 0 and back to 0, so its square climbs from 0 to 16 and falls back: the graph rises to (0, 3) and falls again. Outside −2 and 2 the square only grows, so both arms rise.
  5. Finish the check by substitution: f(−2) = 16 − 32 + 3 = −13, f(0) = 3 and f(2) = 16 − 32 + 3 = −13. This degree-4 polynomial has the three stated turns and both arms up, so degree 4 is possible as well as being the lower bound.

Worked example

Worked example

Bound the degree from a graph with three turning points

A polynomial f has this graph, read left to right: it comes down from the upper left to a valley at (−2, −13), climbs to a peak at (0, 3), drops to a valley at (2, −13), and then climbs to the upper right forever. The table lists seven points on the graph. How many turning points does the graph have? What is the least possible degree of f? Is the leading coefficient positive or negative?

input xoutput f(x)−312−2−13−1−4031−42−13312
x:−3,−2,−1,0,1,2,3;f(x):12,−13,−4,3,−4,−13,12.
Show the steps and the answer
input xoutput f(x)−312−2−13−1−4031−42−13312↓ evaluate: input given, read the output below it
The outputs fall, rise, fall and rise again: the three marked columns are where the direction switches.
  1. Say what is asked. Count the places where the graph turns around, use that count to find the smallest degree the polynomial could have, then read the sign of the leading coefficient from the arms.The rule connects the number of turning points to the degree, so the count comes first.
  2. Trace left to right. In the table the outputs fall from 12 (the column under −3) to −13 (the column under −2), then rise to −4 and 3. The graph switches from falling to rising at (−2,−13). Mark it: a valley.A turning point is a place where falling changes to rising, or rising changes to falling.
  3. Keep tracing. The outputs rise to 3 (the column under 0), then fall to −4 and −13. The graph switches from rising to falling at (0, 3). Mark it: a peak.Rising, then falling, is the other kind of turning point.
  4. Keep tracing. The outputs fall to −13 (the column under 2), then rise to 12 (the column under 3) and keep rising. The graph switches from falling to rising at (2,−13). Mark it: a valley.Every switch counts, including a second valley at the same height as the first.
  5. Count the marks: t=3 turning points.There are three switches of direction and no others. The two arms are not turning points, because the graph does not turn around there.
  6. Use the rule backward. A degree n allows at most n−1 turning points, so 3≤n−1. Add 1 to both sides: 4≤n. This step finds the smallest degree that has room for 3 turning points: the degree is at least 4.Adding the same number to both sides of an inequality keeps it true.
  7. Read the arms. The left arm points up and the right arm points up. Arms pointing the same way mean an even degree, and a right arm pointing up means a positive leading coefficient.End behavior comes from the leading term: an even power with a positive coefficient is large and positive at both ends.
  8. Put the two facts together. The degree is at least 4 and it is even, so the least possible degree is 4, and it cannot be 5.The graph shows how many turning points the formula must allow, and 4 is the smallest even degree with room for three.
Answer
  • Turning points: 3, at (−2, −13), (0, 3) and (2, −13).
  • Least possible degree: 4 (the degree is even and at least 4).
  • Leading coefficient: positive.
Double-check Second way: try the small degrees one at a time. Degree 1 allows 0 turning points, degree 2 allows 1, degree 3 allows 2. None has room for 3. Degree 4 allows 3, so 4 is the smallest that works. To see that degree 4 really can do it, test f(x) = x4 − 8x2 + 3 against the table: f(−2) = 16 − 32 + 3 = −13, f(0) = 3, f(3) = 81 − 72 + 3 = 12. All three match.

The trap

Reading 'at most' as 'exactly'. A degree 3 polynomial does not have to have 2 turning points: y = x3 has none. A graph with 3 turning points does not have to come from degree 4: it could come from degree 6. Going from a formula of degree 1 or more, say 'at most n − 1 turning points'. Going from a graph that is not a flat line, say 'degree at least t + 1'.

Quick check

Try it before you open its steps. It is question 5 of 9 in the full lesson, where they run from easy to exam-hard.

Try it · level 5 of 9

Turning points and x-intercepts disagree

A polynomial's graph rises from the lower left to a peak at (−1, 4), dips to a valley at (0, 3), rises to a second peak at (1, 4), and then falls to the lower right forever. It crosses the x-axis only twice. The table lists five points on it. Find the least possible degree, say whether the degree is even or odd, and give the sign of the leading coefficient.

input xoutput f(x)−2−5−1403142−5
x:−2,−1,0,1,2;f(x):−5,4,3,4,−5.
Show the steps and the answer
input xoutput f(x)−2−5−1403142−5↓ evaluate: input given, read the output below it
The outputs go up, down, up, down.
  1. Say what is asked: count the turning points to get the least degree, then use the arms to decide even or odd and the sign of the leading coefficient.Turning points bound the degree, and end behavior gives the rest.
  2. Trace and mark. Rising to (−1,4), then falling: a peak. Falling to (0, 3), then rising: a valley. Rising to (1, 4), then falling: a peak. In the output row of the table: −5, 4, 3, 4, −5.Each switch between rising and falling is a turning point.
  3. Count: t=3. The valley at (0, 3) counts even though it is shallow and sits above the x-axis.A turning point is about the direction changing, not about how deep the dip is or whether it reaches the x-axis.
  4. Add 1: the degree is at least 3+1=4.A graph with t turning points has degree at least t + 1.
  5. Set aside the tempting count. Two x-intercepts might suggest degree 2, but a degree 2 polynomial allows only 2−1=1 turning point, and this graph has 3.The number of x-intercepts can be smaller than the degree, so it cannot be used to pin the degree down here.
  6. Read the arms. Both arms point down. Arms pointing the same way mean an even degree, and a right arm pointing down means a negative leading coefficient.An even power with a negative coefficient is large and negative at both ends.
Answer
  • Least possible degree: 4.
  • The degree is even.
  • The leading coefficient is negative.
Double-check The polynomial f(x) = −x4 + 2x2 + 3 fits every column of the table: f(−2) = −16 + 8 + 3 = −5, f(−1) = −1 + 2 + 3 = 4, f(0) = 3, f(1) = −1 + 2 + 3 = 4, f(2) = −16 + 8 + 3 = −5. Its degree is 4 and its leading coefficient is −1, as predicted. Also, both arms down means the graph starts rising and ends falling, which takes an odd number of switches, and 3 is odd.

7 Quick checks for the whole unit

8 questions

Quick check 1 of 8

Is f(x) = 7x⁵ a power function? If so, name k and p.

Show the steps and the answer
Answer
  • Yes: k = 7 and p = 5
  • It is one number times x to one whole-number power, with nothing added on

Quick check 2 of 8

Is g(x) = 3x2 + 1 a power function? Is it a polynomial?

Show the steps and the answer
Answer
  • Not a power function, because the + 1 adds a second term
  • It is a polynomial: each term is a number times a whole-number power of x, and the plain number 1 counts as power 0

Quick check 3 of 8

Where do the arms of f(x) = −4x⁶ point? Write both arrow statements.

Show the steps and the answer
Answer
  • As x → −∞, f(x) → −∞, and as x → ∞, f(x) → −∞: both arms down
  • For every big input, positive or negative, x⁶ is a big positive number, and −4 makes it negative

Quick check 4 of 8

For h(x) = 4 − 9x2 + x3, give the degree, the leading term and the leading coefficient.

Show the steps and the answer
Answer
  • Degree 3
  • Leading term x3, the highest power, even though it is written last
  • Leading coefficient 1, because x3 means 1 · x3

Quick check 5 of 8

Where do the arms of p(x) = 2x3 − 100x2 + 5 point?

Show the steps and the answer
Answer
  • Left arm down, right arm up: as x → −∞, p(x) → −∞, and as x → ∞, p(x) → ∞
  • Far from 0 the leading term 2x3 outweighs the other terms, and an odd power with a positive coefficient points this way

Quick check 6 of 8

Find the y-intercept and the x-intercepts of f(x) = (x − 2)(x + 5).

Show the steps and the answer
Answer
  • y-intercept (0, −10), because f(0) = (−2)(5) = −10
  • x-intercepts (2, 0) and (−5, 0), because a product is 0 only when a factor is 0, so x − 2 = 0 or x + 5 = 0

Quick check 7 of 8

A polynomial has degree 5. What is the largest number of turning points its graph can have?

Show the steps and the answer
Answer
4, because a polynomial of degree n has at most n − 1 turning points

Quick check 8 of 8

The graph of a polynomial has 3 turning points. What is the smallest degree it can have?

Show the steps and the answer
Answer
4, because degree n allows at most n − 1 turning points, so n − 1 must be at least 3