Quarry School

Zeros of polynomial functions: crash course

about 35 min to listen7 lessons15 questions to tryUnit 15 of 17

Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.

1 The Remainder Theorem

about 3 minOpen the full lessonOnly this lesson

The rule

Remainder Theorem: if a polynomial f(x) is divided by x − c, the remainder is f(c).source 1

In symbols, for any number c: f(x)=(x−c)·q(x)+r, and r=f(c).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = 2x3 − 5x2 + x − 4, find f(3). By the Remainder Theorem, use the divisor x − 3 and c = 3: the output equals the remainder.
  2. Write 2, −5, 1, −4 in descending powers. Synthetic division needs a place for every power so the columns line up; here none is missing.
  3. Bring down 2. Follow the synthetic division rule, multiply by 3 then add: −5 + 6 = 1, then 1 + 3 = 4, then −4 + 12 = 8. Each new bottom entry supplies the next multiplication.
  4. Read the last entry as the remainder. The Remainder Theorem gives f(3) = 8; the other entries give the quotient 2x2 + x + 4.
  5. Check by substitution into the original: 2·33 − 5·32 + 3 − 4 = 54 − 45 + 3 − 4 = 8. Substitution and division must agree because both compute f(3).

Worked example

Worked example

Finding f(3) with the table

Let f(x) = 2x3 − 5x2 + x − 4. Use synthetic division and the Remainder Theorem to find f(3).

What it asks. Find a function value or a remainder.

Show the steps and the answer

The plan. Find c, run the multiply-and-add row, then check by substitution.

divide 2x3 − 5x2 + x − 4 by x − 3: c = 3

top row: 2, −5, 1, −4

products (bottom number · 3): 6, 3, 12

bottom row: 2, 1, 4, 8

remainder: 8 = f(3)

  1. Plan. Find c, run the multiply-and-add row, then check by substitution.
  1. Say what the question asks: the input is 3, so find the output f(3). The Remainder Theorem lets us get it as the remainder when f(x) is divided by x−3.f(3) and that remainder are the same number, so we may take the table road instead of cubing 3.
  2. Find c: set the divisor equal to 0. x−3=0 gives x=3, so c=3. Plug back: 3−3=0.This finds the one input that makes the divisor zero, and that input is the number the table runs on.
  3. Write the coefficients from the highest power down: 2, −5, 1, −4.Every power from x3 down to the constant is present, so no 0 is needed. The x term has an invisible 1 in front, and −5 and −4 keep their minus signs.
  4. Bring down the 2.The first bottom number is always the leading coefficient; nothing has been added to it yet.
  5. Multiply 2 · 3 = 6, write 6 under −5, and add: −5+6=1.Each round multiplies the newest bottom number by c and adds the product to the next coefficient.
  6. Multiply 1 · 3 = 3, write 3 under 1, and add: 1+3=4.The same round, one column to the right.
  7. Multiply 4 · 3 = 12, write 12 under −4, and add: −4+12=8.This last column holds the constant term, so its sum is the leftover of the whole division.
  8. Read the bottom row: 2, 1, 4, 8. The remainder is 8, so f(3)=8.The Remainder Theorem says the remainder from dividing by x − 3 is f(3). The numbers before it, 2, 1, 4, are the quotient 2x2 + x + 4.
Answer
  • The remainder is 8.
  • f(3) = 8.
Double-check Plug 3 in directly: 2 · 33 − 5 · 32 + 3 − 4 = 2 · 27 − 5 · 9 + 3 − 4 = 54 − 45 + 3 − 4 = 8. Both roads give 8. Multiplying back agrees too: (x − 3)(2x2 + x + 4) + 8 = 2x3 − 5x2 + x − 4.

The trap

Wrong: divide by x + 6 with c = 6. Right: set x + 6 = 0, so c = −6.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Missing powers (gotcha: write a 0 for each one)

Let f(x) = x4 − 5x2 + 3. Use synthetic division to find f(2).

What it asks. Find a function value or a remainder.

Show the steps and the answer

The plan. Find c, run the multiply-and-add row, then check by substitution.

f(x)=x4−5x2+3

powers: x4, x3, x2, x, constant

coefficients: 1, 0, −5, 0, 3

bottom row for c = 2: 1, 2, −1, −2, −1

  1. Plan. Find c, run the multiply-and-add row, then check by substitution.
  1. Say what it asks: the input is 2, so find the output f(2). By the Remainder Theorem it is the remainder when f(x) is divided by x−2.The question names f(2), so the divisor to use is x − 2.
  2. c=2: x−2=0 gives x=2. Plug back: 2−2=0.The table runs on the input that makes the divisor zero.
  3. Write the coefficients with placeholders: 1, 0, −5, 0, 3.The powers run x4, x3, x2, x, constant. There is no x3 term and no x term, so each gets a 0. Without them, −5 would land in the x3 column and the table would work on a different polynomial.
  4. Bring down 1. Multiply 1 · 2 = 2 and add to 0: 0+2=2.A placeholder 0 takes part like any other coefficient.
  5. Multiply 2 · 2 = 4 and add to −5: −5+4=−1.Newest bottom number times c, added to the next coefficient.
  6. Multiply −1 · 2 = −2 and add to 0: 0+(−2)=−2.A negative times a positive is negative.
  7. Multiply −2 · 2 = −4 and add to 3: 3+(−4)=−1.This last column holds the constant, so this sum is the remainder.
  8. The bottom row is 1, 2, −1,−2,−1. The remainder is −1, so f(2)=−1.A remainder here can be negative: it is an output of f, and outputs can be any number.
Answer
f(2)=−1.
Double-check Plug in 2: 24 − 5 · 22 + 3 = 16 − 5 · 4 + 3 = 16 − 20 + 3 = −1. Same number.

2 The Factor Theorem

about 5 minOpen the full lessonOnly this lesson

The rule

Factor Theorem.

For a polynomial f(x) and a number c: x−c is a factor of f(x) exactly when f(c)=0.source 1 When that happens, f(x)=(x−c)·q(x), where q(x) is the quotient from dividing f(x) by x−c.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = x3 − 2x2 − 19x + 20, test x − 5. Set x − 5 = 0 to get c = 5, the input the Factor Theorem requires.
  2. Use coefficients 1, −2, −19, 20. Synthetic division keeps one entry per power. Bring down 1, then multiply by 5 and add: −2 + 5 = 3, −19 + 15 = −4, and 20 − 20 = 0.
  3. The Remainder Theorem gives f(5) = 0. The Factor Theorem therefore confirms x − 5 as a factor. Read the other entries one degree lower to get f(x) = (x − 5)(x2 + 3x − 4).
  4. Factor the quadratic using two numbers with product −4 and sum 3: 4 and −1. The product-and-sum rule gives x2 + 3x − 4 = (x + 4)(x − 1), so keep all factors: f(x) = (x − 5)(x + 4)(x − 1).
  5. Check by expanding the factors to recover x3 − 2x2 − 19x + 20; the distributive rule verifies the whole polynomial. Also substitute x = 2: both forms give −18, as the worked example shows.

Worked example

Worked example

Confirm a factor, then factor a cubic completely

Show that x − 5 is a factor of f(x) = x3 − 2x2 − 19x + 20. Then factor f(x) completely.

What it asks. Test a factor and factor the polynomial.

Show the steps and the answer

The plan. Confirm a zero remainder, factor the quotient, and check with a test value.

c = 5

Top row: 1, −2, −19, 20

Numbers added: 5, 15, −20

Bottom row: 1, 3, −4, 0

Last number 0: x − 5 is a factor

Quotient: x2 + 3x − 4

x + 4x − 1x − 5
The ticks sit at the zeros −4, 1 and 5, and each one carries the factor that is 0 there.
  1. Plan. Confirm a zero remainder, factor the quotient, and check with a test value.
  1. Say what the question asks. To show that x−5 is a factor means: put 5 in and show the output is 0. To factor completely means: write f(x) as a product of pieces that cannot be split any further.Knowing the target tells you when you are done: first a remainder of 0, then a product of the simplest factors.
  2. Read c from the factor: x−5 has c=5.The Factor Theorem is stated for x − c. Matching x − 5 to x − c gives c = 5.
  3. Set up synthetic division with 5 outside and the coefficients 1, −2,−19, 20 in the top row.The powers x3, x2, x and the constant are all present, so no 0 placeholder is needed.
  4. Bring down the 1. Then multiply by 5 and add, column by column. 5×1=5 and −2+5=3. 5×3=15 and −19+15=−4. 5×(−4)=−20 and 20+(−20)=0. The bottom row is 1, 3, −4, 0.This is the synthetic division routine. Each new bottom number is the top number plus 5 times the bottom number before it.
  5. Read the last number: 0. So f(5)=0, and x−5 is a factor.The Remainder Theorem says the last number is f(5). The Factor Theorem says a remainder of 0 means x − 5 divides f(x) with nothing left over.
  6. Read the quotient from the rest of the bottom row: 1, 3, −4 means x2+3x−4. So f(x)=(x−5)(x2+3x−4).Dividing a cubic by x − 5 lowers the degree by one, so the three numbers stand for x2, x and the constant.
  7. Factor the quotient x2+3x−4. Two numbers that multiply to −4 and add to 3 are 4 and −1, so x2+3x−4=(x+4)(x−1).4 × (−1) = −4 and 4 + (−1) = 3. A quadratic with leading coefficient 1 factors from such a pair.
  8. Write the full answer: f(x)=(x−5)(x+4)(x−1). Then plug the two new zeros back into the original. f(−4)=−64−32+76+20=0 and f(1)=1−2−19+20=0.Each factor promises a zero: x + 4 promises −4 and x − 1 promises 1. Putting them into the original polynomial shows that both promises hold.
Answer
  • x − 5 is a factor, because f(5) = 0.
  • f(x)=(x−5)(x+4)(x−1)
Double-check Put x = 2 into both forms. Original: 23 − 2·22 − 19·2 + 20 = 8 − 8 − 38 + 20 = −18. Factored: (2 − 5)(2 + 4)(2 − 1) = (−3)(6)(1) = −18. The two outputs match. At x = 0 the original gives 20 and the factored form gives (−5)(4)(−1) = 20, which also matches.

The trap

Wrong: turn the zero c into x + c. Right: use x − c and substitute c to check.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

A missing power needs a 0 placeholder

The number 4 is a zero of f(x) = x3 − 21x + 20. Factor f(x) completely.

What it asks. Factor the polynomial completely from a known zero.

Show the steps and the answer

The plan. Divide out the known zero, factor the quotient, and check with a test value.

  1. Plan. Divide out the known zero, factor the quotient, and check with a test value.
  1. Say what the question asks. You are told that f(4)=0. Write f(x) as a product of the simplest factors.The zero 4 gives the factor x − 4 by the Factor Theorem. Division finds the rest.
  2. Write the top row with a 0 for the missing x2 term: 1, 0, −21, 20.Synthetic division keeps one column for each power. Skipping the x2 column would push every later number into the wrong power.
  3. Divide with 4. Bring down 1. 4×1=4 and 0+4=4. 4×4=16 and −21+16=−5. 4×(−5)=−20 and 20+(−20)=0. Bottom row: 1, 4, −5, 0.The last number is 0, which confirms that 4 is a zero.
  4. Read the quotient: x2+4x−5. So f(x)=(x−4)(x2+4x−5).The numbers 1, 4, −5 stand for x2, x and the constant, one degree below the cubic.
  5. Factor x2+4x−5. The numbers 5 and −1 multiply to −5 and add to 4, so it is (x+5)(x−1).5 × (−1) = −5 and 5 + (−1) = 4.
Answer
f(x)=(x−4)(x+5)(x−1)
Double-check At x = 2 the original gives 8 − 42 + 20 = −14. The factored form gives (2 − 4)(2 + 5)(2 − 1) = (−2)(7)(1) = −14. They match. Also f(1) = 1 − 21 + 20 = 0, as the factor x − 1 promises.

3 The Rational Zero Theorem

about 4 minOpen the full lessonOnly this lesson

The rule

Let f(x)=anxn+ ...

+a1x+a0, where every coefficient is an integer, an≠0 and a0≠0. If pq is a rational zero of f written in lowest terms, then p is a factor of the constant term a0 and q is a factor of the leading coefficient an.source 1 So every rational zero is on the list ±factorofa0factorofan.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = 2x3 + 3x2 − 8x + 3, check the Rational Zero Theorem’s conditions: the coefficients are integers and the constant 3 is nonzero. These conditions let us list every rational candidate.
  2. List the positive factors of the constant 3: 1 and 3. The Rational Zero Theorem puts these in the numerator because a reduced rational zero’s numerator divides the constant.
  3. List the positive factors of the leading coefficient 2: 1 and 2. The same theorem puts these in the denominator because a reduced rational zero’s denominator divides the leading coefficient.
  4. Pair every numerator with every denominator: 11, 31, 12, 32. Reduce fractions and remove duplicates, because different fractions can name the same input. Here the distinct values are 1, 3, 12, 32.
  5. Include both signs: ±1, ±3, ±12, ±32. The theorem allows positive and negative rational zeros. Report these as candidates, since the Factor Theorem requires an output of zero before any candidate becomes a zero.
  6. Check completeness: 2 numerators times 2 denominators give 4 distinct values and both signs give 8 candidates. To check the distinction, substitution gives f(1) = 0 but f(3) = 60. The list includes actual zeros and unsuccessful candidates.

Worked example

Worked example

List the possible rational zeros of a cubic

List every possible rational zero of f(x) = 2x3 + 3x2 − 8x + 3. In plain words: write down every whole number or fraction that could make f(x) equal 0. You are not asked which ones actually do.

What it asks. List every possible rational zero.

Show the steps and the answer

The plan. Put constant factors over leading factors, reduce, remove repeats, and use both signs.

−3−3/2−1−1/21/213/23
The eight marked spots are the only places where a rational zero of 2x3 + 3x2 − 8x + 3 can sit.
  1. Plan. Put constant factors over leading factors, reduce, remove repeats, and use both signs.
  1. Check the setup. The powers run 3, 2, 1, 0 in descending order. The coefficients 2, 3, −8 and 3 are all integers, and the constant term 3 is not 0.The Rational Zero Theorem only speaks about polynomials with integer coefficients and a nonzero constant term.
  2. Read the constant term: 3. Its positive factors are 1 and 3. These are the tops, p.The top of any rational zero must divide the constant term. 3 = 1 × 3, and no other positive whole number divides 3 evenly.
  3. Read the leading coefficient: 2. Its positive factors are 1 and 2. These are the bottoms, q.The bottom of any rational zero must divide the leading coefficient. 2 = 1 × 2, and nothing else divides 2 evenly.
  4. Write every top over every bottom: 11,31,12,32. This is the grid in the table: the row q=1, then the row q=2.2 tops and 2 bottoms make 2 × 2 = 4 fractions. Going row by row means none is skipped.
  5. Reduce: 11=1 and 31=3. The fractions 12 and 32 are already in lowest terms. No value appears twice.A fraction over 1 is a whole number, and repeats would be crossed out here if there were any.
  6. Put ± in front of each value: ±1,±3,±12,±32.A zero can sit on either side of 0 on the number line, so each candidate comes with its opposite.
Answer
  • ±1,±3,±12,±32
  • Written out, that is 8 candidates: 1, −1, 3, −3, 12, −12, 32, −32.
Double-check Count: 2 tops × 2 bottoms = 4 fractions, no repeats, doubled for the signs gives 8, which matches. Then compare the list with real zeros by plugging in, which by the Remainder Theorem gives the same number as the remainder from synthetic division. f(1) = 2 + 3 − 8 + 3 = 0. f(−3) = −54 + 27 + 24 + 3 = 0. f(12) = 14 + 34 − 4 + 3 = 0. The zeros 1, −3 and 12 are all on the list. Also f(3) = 54 + 27 − 24 + 3 = 60, so 3 is on the list without being a zero.

The trap

Wrong: leading factors over constant factors. Right: constant factors over leading factors.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

Three bottoms and four repeats

List the possible rational zeros of f(x) = 4x3 − 12x2 + 5x + 6. In plain words: write every whole number or fraction that could make f(x) equal 0, each one once.

What it asks. List every possible rational zero.

Show the steps and the answer

The plan. Put constant factors over leading factors, reduce, remove repeats, and use both signs.

tops p: 1, 2, 3, 6

bottoms q: 1, 2, 4

over 1: 1, 2, 3, 6

over 2: 12, 1, 32, 3

over 4: 14, 12, 34, 32

new values in each row: 4, then 2, then 2

  1. Plan. Put constant factors over leading factors, reduce, remove repeats, and use both signs.
  1. Find the constant term: 6. Positive factors: 1, 2, 3, 6.These are the possible tops.
  2. Find the leading coefficient: 4. Positive factors: 1, 2, 4.These are the possible bottoms. 4 = 1 × 4 = 2 × 2. The number 3 does not divide 4 evenly, so it is not a factor.
  3. Row for bottom 1: 1, 2, 3, 6.Every top over 1 is the top itself.
  4. Row for bottom 2: 12,22=1,32,62=3.Reduce as you go. The values 1 and 3 repeat the first row.
  5. Row for bottom 4: 14,24=12,34,64=32.Divide top and bottom by 2 where you can. The values 12 and 32 repeat the second row.
  6. Cross out the four repeats. What is left: 1, 2, 3, 6, 12,32,14,34.Each value is listed once.
  7. Attach both signs: ±1,±2,±3,±6,±12,±32,±14,±34.Each candidate could be positive or negative.
Answer
  • ±1,±2,±3,±6,±12,±32,±14,±34
  • 16 candidates.
Double-check Count: 4 tops × 3 bottoms = 12 fractions, minus 4 repeats leaves 8, doubled is 16. Then plug in: f(2) = 32 − 48 + 10 + 6 = 0. f(32) = 272 − 27 + 152 + 6 = 21 − 27 + 6 = 0. f(−12) = −12 − 3 − 52 + 6 = 0. The zeros 2, 32 and −12 are all on the list.

4 Finding every zero, step by step

about 7 minOpen the full lessonOnly this lesson

The rule

If c is a zero of f, then f(x)=(x−c)·q(x), and the zeros of f are c together with the zeros of the quotient q(x).

Take f with integer coefficients and a nonzero constant term (if the constant term is 0, factor out x and work with what is left). Every rational zero of a quotient is also a rational zero of f, so keep testing the same candidates ±factoroftheconstanttermfactoroftheleadingcoefficient of f on each quotient. When the quotient is a quadratic, the quadratic formula gives its last two zeros. If no candidate is a zero of a quotient of degree 3 or more, that quotient has no rational zero, and its zeros need another method.

How

  1. For f(x) = x3 − 8x + 8, write coefficients 1, 0, −8, 8. Synthetic division needs the zero placeholder for x2. The nonzero constant 8 means x is not a factor.
  2. Use the Rational Zero Theorem to list ±1, ±2, ±4, ±8: factors of the constant 8 over factors of the leading coefficient 1. Every rational zero must be on this list.
  3. Test by substitution: f(1) = 1 and f(−1) = 15. Neither output is 0, so neither input is a zero. By the Factor Theorem, neither x − 1 nor x + 1 is a factor.
  4. Test 2 by synthetic division. Bring down 1; multiply by 2 and add to get 0 + 2 = 2, −8 + 4 = −4, and 8 − 8 = 0. The Remainder Theorem gives f(2) = 0, and the Factor Theorem gives f(x) = (x − 2)(x2 + 2x − 4).
  5. Set the quadratic factor equal to zero. The zero-product rule says each factor can supply zeros. Use the quadratic formula with a = 1, b = 2, c = −4: x = −2±202 = −1 ± 5. It solves the remaining factor without more candidate tests.
  6. Keep 2 from division and both values −1 + 5 and −1 − 5 from the formula. The zero-product rule makes this the full list because every factor has been solved.
  7. Check by expansion: (x − 2)(x2 + 2x − 4) = x3 − 8x + 8. Substituting either −1 ± 5 into x2 + 2x − 4 gives 0, and substituting 2 into x − 2 gives 0. Thus every listed input makes the original product zero.

Worked example

Worked example

Every zero of x3 − 8x + 8

Find every zero of f(x) = x3 − 8x + 8, real or complex. In plain words: find every input x that makes the output 0, and stop only when none is left.

What it asks. Find every zero, counting repeats.

Show the steps and the answer

The plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.

Test 2: divide x3 + 0x2 − 8x + 8 by x − 2

Top row: 1, 0, −8, 8

Added in: 2, 4, −8

Bottom row: 1, 2, −4, 0

Remainder 0, so 2 is a zero

Quotient: x2 + 2x − 4

  1. Plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.
  1. Write f(x) with every power, top power first: x3+0x2−8x+8. The coefficients are 1, 0, −8, 8.There is no x2 term, so its slot holds a 0. Synthetic division lines the numbers up by power, and an empty slot would push every number into the wrong column.
  2. The constant term is 8, not 0, so there is no x to pull out. List the candidates: the factors of 8 are 1, 2, 4, 8, and the leading coefficient 1 has only the factor 1. Candidates: ±1,±2,±4,±8.The Rational Zero Theorem: every rational zero is ±factorof8factorof1, and dividing by 1 changes nothing. No rational zero can be off this list.
  3. Test 1 by plugging in: f(1)=1−8+8=1.1 is the quickest candidate to test. The output is 1, not 0, so 1 is not a zero: cross it off.
  4. Test −1: f(−1)=(−1)3−8(−1)+8=−1+8+8=15.(−1)3 = −1, and −8 times −1 is +8. The output is 15, not 0, so −1 is not a zero.
  5. Test 2 with synthetic division. Top row 1, 0, −8, 8. Bring down the 1. 1×2=2, and 0+2=2. 2×2=4, and −8+4=−4. −4×2=−8, and 8+(−8)=0. Bottom row: 1, 2, −4, 0.By the Remainder Theorem the last number in the bottom row is f(2). It is 0, so 2 is a zero. Testing with synthetic division in place of plugging in hands us the quotient at the same time.
  6. Read the bottom row as a factorization: x3−8x+8=(x−2)(x2+2x−4).The Factor Theorem: remainder 0 means x − 2 is a factor. The numbers 1, 2, −4 are the quotient, one power lower than x3, so they mean x2 + 2x − 4.
  7. The quotient is a quadratic, so stop testing. Set x2+2x−4=0, with a=1,b=2,c=−4.This finds the inputs that make the second factor 0, and any input that makes one factor 0 makes the whole product 0. The formula finishes any quadratic, so the rest of the list (−2, ±4, ±8) never needs testing. Here c is the quadratic's constant term, not a tested number.
  8. Find the discriminant: b2−4ac=22−4(1)(−4)=4+16=20.Subtracting −16 is adding 16. The result is positive but not a perfect square, so both zeros are real and carry a square root.
  9. Use the formula: x=−2±202=−2±252=−1±5.20 = 4·5 = 25. Then divide each term on top by the 2 underneath: −2 ÷ 2 = −1 and 25 ÷ 2 = 5.
  10. Gather the zeros: 2 from testing, then −1+5 and −1−5 from the formula.The product (x − 2)(x2 + 2x − 4) is 0 only when one of its pieces is 0, so these three numbers are every zero.
Answer
  • x = 2
  • x = −1 + 5 (≈ 1.24, rounded)
  • x = −1 − 5 (≈ −3.24, rounded)
Double-check Multiply the pieces back: (x − 2)(x2 + 2x − 4) = x3 + 2x2 − 4x − 2x2 − 4x + 8 = x3 − 8x + 8, the polynomial we started with. Then plug −1 + 5 into the quadratic: (−1 + 5)2 = 1 − 25 + 5 = 6 − 25, and 6 − 25 + 2(−1 + 5) − 4 = 6 − 25 − 2 + 25 − 4 = 0.

The trap

Wrong: keep testing the original polynomial. Right: test the quotient and keep every zero already found.

Quick check

Try it before you open its steps. It is question 7 of 13 in the full lesson, where they run from easy to exam-hard.

Try it · level 7 of 13

Fractions, two divisions and square roots

Find every zero of f(x) = 3x4 − 11x3 + 2x2 + 14x + 4, real or complex: every input that makes the output 0.

What it asks. Find every zero, counting repeats.

Show the steps and the answer

The plan. Find a zero, divide it out, and repeat; finish the quadratic and keep all roots.

3x4−11x3+2x2+14x+4

divide by x − 2: bottom row 3, −5, −8, −2, 0

3x3−5x2−8x−2

divide by x + 13: bottom row 3, −6, −6, 0

3x2 − 6x − 6, divided by 3: x2 − 2x − 2

formula: x = 1 ± 3

  1. Plan. Find a zero, divide it out, and repeat; finish the quadratic and keep all roots.
  1. List: the factors of 4 are 1, 2, 4, and the factors of 3 are 1 and 3. Candidates: ±1,±2,±4,±13,±23,±43.Each candidate is ±factorof4factorof3; dividing by 3 gives the thirds.
  2. Test 1: 3−11+2+14+4=12. Test −1: 3+11+2−14+4=6.Neither is 0, so cross off 1 and −1. For −1 the odd powers flip sign: −11x3 becomes +11 and 14x becomes −14.
  3. Test 2. Top row 3, −11, 2, 14, 4. Bring down 3. 3×2=6, and −11+6=−5. −5×2=−10, and 2+(−10)=−8. −8×2=−16, and 14+(−16)=−2. −2×2=−4, and 4+(−4)=0. Bottom row: 3, −5,−8,−2, 0.Remainder 0: 2 is a zero, and the quotient is 3x3 − 5x2 − 8x − 2.
  4. Make a new list from the quotient: the factors of 2 over the factors of 3 give ±1,±2,±13,±23. Cross off 1 and −1 at once. Test 2 again: 24−20−16−2=−14. Test −2: −24−20+16−2=−30.The list shrank because the constant term is now −2. A number that failed on f fails on the quotient too, since every zero of the quotient is a zero of f. 2 gets a second test because a zero can repeat; it fails here, and so does −2.
  5. Test the thirds. 13 gives the bottom row 3, −4,−283,−469, so its remainder is not 0. Try −13: top row 3, −5,−8,−2. Bring down 3. 3×(−13)=−1, and −5+(−1)=−6. −6×(−13)=2, and −8+2=−6. −6×(−13)=2, and −2+2=0. Bottom row: 3, −6,−6, 0.Remainder 0: −13 is a zero, and the quotient is 3x2 − 6x − 6.
  6. Divide by 3: solve x2−2x−2=0.Every coefficient of 3x2 − 6x − 6 is a multiple of 3, and dividing both sides by 3 keeps the same solutions.
  7. a=1,b=−2,c=−2. Discriminant: 4−4(1)(−2)=4+8=12, and 12=4·3=23. So x=2±232=1±3.This finds the inputs that make the last quotient 0; divide each term on top by 2.
  8. Gather: 2, −13,1+3,1−3.Two zeros from testing and two from the formula.
Answer
  • x = 2
  • x=−13
  • x = 1 + 3 (≈ 2.73, rounded)
  • x = 1 − 3 (≈ −0.73, rounded)
Double-check The bottom rows say f(x) = (x − 2)(x + 13)(3x2 − 6x − 6). Move the 3 out of the last piece into the middle one: 3 × (x + 13) = 3x + 1, so f(x) = (x − 2)(3x + 1)(x2 − 2x − 2). Multiply: (x − 2)(3x + 1) = 3x2 − 5x − 2, and (3x2 − 5x − 2)(x2 − 2x − 2) = 3x4 − 6x3 − 6x2 − 5x3 + 10x2 + 10x − 2x2 + 4x + 4 = 3x4 − 11x3 + 2x2 + 14x + 4, the starting polynomial.

5 The Fundamental Theorem of Algebra and complex conjugate pairs

about 6 minOpen the full lessonOnly this lesson

The rule

Fundamental Theorem of Algebra: every polynomial of degree n ≥ 1 has at least one zero among the complex numbers, so it has exactly n zeros counted with multiplicity; written as a product, f(x) = an(x − c1)(x − c2) ··· (x − cn), where an is the leading coefficient (the Linear Factorization Theorem).source 1

Complex conjugate pairs: if every coefficient of f is real and a + bi with b ≠ 0 is a zero, then its conjugate a − bi is also a zero.source 1

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = 2x3 − 3x2 + 8x + 5 with given zero 1 + 2i, read degree 3. The Fundamental Theorem of Algebra gives 3 zeros counted with repeats, so it sets the target count.
  2. All coefficients are real. Apply the complex conjugate pairs rule to add 1 − 2i. These two zeros leave one place; that zero must be real because a nonreal zero would need another partner.
  3. Use the Rational Zero Theorem to list ±1, ±5, ±12, ±52. The numerators divide 5 and the denominators divide 2. Test small candidates: f(1) = 12, f(−1) = −8, and f(12) = 172; none gives zero.
  4. Test −12 by synthetic division with 2, −3, 8, 5. Bring down 2, then multiply and add: −3 − 1 = −4, 8 + 2 = 10, and 5 − 5 = 0. The Remainder Theorem identifies the final 0 as f(−12). The other bottom entries give the quotient 2x2 − 4x + 10, and the Factor Theorem gives f(x) = (x + 12)(2x2 − 4x + 10).
  5. Collect −12, 1 + 2i and 1 − 2i. The Fundamental Theorem’s count is met and the nonreal pair is complete, so the search is finished.
  6. Check the quotient with the quadratic formula: x = 4±−644 = 4±8i4 = 1 ± 2i. Also substitute −12 into f to get −14 − 34 − 4 + 5 = 0. These checks recover the pair and verify the real zero.

Worked example

Worked example

Every zero of a cubic, starting from one complex zero

The number 1 + 2i is a zero of f(x) = 2x3 − 3x2 + 8x + 5. Find every zero of f.

What it asks. Complete the zeros of a polynomial with real coefficients.

Show the steps and the answer

The plan. Add the conjugate partner, count what is missing, and test rational candidates for the real zero.

degree 3 → 3 zeros

given: 1 + 2i

partner: 1 − 2i (real coefficients)

one missing, so it is real

found by testing: −12

−1/2
The whole line is the real numbers, and only −12 lands on it; 1 + 2i and 1 − 2i are not on the line at all.
  1. Plan. Add the conjugate partner, count what is missing, and test rational candidates for the real zero.
  1. Say what the question asks: find every input x that makes the output f(x) equal 0. One of them, 1+2i, is handed to you.A zero is an input whose output is 0, so the job is to name all of them, not only the given one.
  2. Read the degree: the biggest exponent on x is 3, so f has exactly 3 zeros, counting repeats.The Fundamental Theorem of Algebra: a polynomial of degree n has exactly n zeros among the complex numbers.
  3. Look at the coefficients 2, −3, 8 and 5. All are real, so the conjugate of 1+2i, which is 1−2i, is a zero too.Nonreal zeros of a polynomial with real coefficients come in complex conjugate pairs. The conjugate keeps the real part 1 and flips the sign of the i part.
  4. Count: 1+2i and 1−2i make 2 zeros, so 3−2=1 zero is missing, and it must be real.If the missing zero were nonreal, its own partner would be a zero too, making 4 zeros, more than degree 3 allows.
  5. List the rational candidates. The factors of the constant term 5 are 1 and 5, and the factors of the leading coefficient 2 are 1 and 2, so the candidates are ±1,±5,±12 and ±52.The Rational Zero Theorem: any rational zero is ± a factor of the constant term over a factor of the leading coefficient.
  6. Test the small ones first by plugging in: f(1)=2−3+8+5=12,f(−1)=−2−3−8+5=−8, and f(12)=2·18−3·14+8·12+5=14−34+4+5=172.A zero must give the output 0, and 12, −8 and 172 are not 0. Small candidates keep the arithmetic small; any order would work.
  7. Test −12 with synthetic division on the coefficients 2, −3, 8, 5. Bring down 2. Then 2×(−12)=−1 and −3+(−1)=−4. Then −4×(−12)=2 and 8+2=10. Then 10×(−12)=−5 and 5+(−5)=0.The last number is the remainder, which is f(−12) by the Remainder Theorem. It is 0, so −12 is a zero, and the other numbers 2, −4 and 10 give the quotient 2x2 − 4x + 10.
  8. Plug −12 back in to see it: f(−12)=2·(−18)−3·14+8·(−12)+5=−14−34−4+5=0.This confirms that the step found an input whose output is 0. Here (−12)3 = −18 and (−12)2 = 14.
  9. Collect the zeros: −12,1+2i and 1−2i. That makes 3, the degree, so the search is over.The Fundamental Theorem of Algebra promised exactly 3, and the one nonreal pair is complete.
Answer
  • −12
  • 1 + 2i
  • 1−2i
Double-check Solve the leftover quadratic 2x2 − 4x + 10 = 0 with the quadratic formula: a = 2, b = −4 and c = 10, so b2 − 4ac = 16 − 80 = −64 and −64 = 8i. Then x = 4±8i4 = 1 ± 2i. The given zero and its partner come back, so all three zeros agree.

The trap

Wrong: count only distinct intercepts. Right: count real and nonreal zeros with multiplicity to the degree.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Which mixes are possible

A polynomial has real coefficients and degree 5. How many of its zeros, counted with multiplicity, can be real?

What it asks. Decide which real and nonreal zero counts are possible.

Show the steps and the answer

The plan. Check the degree total and require nonreal zeros to come in pairs.

  1. Plan. Check the degree total and require nonreal zeros to come in pairs.
  1. Say what it asks: list every possible number of real zeros that the degree and the pairing rule allow.No formula is given, so the answer is a list of possibilities, not one number.
  2. Total: exactly 5 zeros.The Fundamental Theorem of Algebra, degree 5.
  3. The nonreal zeros come two at a time, so there are 0, 2 or 4 of them.Each nonreal zero brings its conjugate, so the nonreal count is even, and it cannot pass 5.
  4. The real zeros fill the rest: 5−0=5,5−2=3 or 5−4=1.Real zeros plus nonreal zeros must make 5.
Answer
  • 5, 3 or 1 real zeros
  • never 0, 2 or 4, so always at least one
Double-check Each answer really happens. (x − 1)5 has 5 real zeros, 1 counted five times. (x − 1)3(x2 + 1) has 3 real zeros and the pair i, −i. (x − 1)(x2 + 1)(x2 + 4) has 1 real zero and the pairs i, −i and 2i, −2i. And 0, 2 or 4 real zeros would leave 5, 3 or 1 nonreal zeros, an odd number that cannot be split into pairs.

6 Building a polynomial from its zeros

about 7 minOpen the full lessonOnly this lesson

The rule

A polynomial of degree n whose zeros are exactly c1,c2, ..., cn, each listed as often as its multiplicity, has the form f(x)=a(x−c1)(x−c2) ...

(x−cn), where a is any nonzero number.source 1 With real coefficients, a complex conjugate pair p+ qi and p− qi contributes the factor (x−p)2+q2. A point (x0,y0) on the graph that is not a zero fixes a: solve y0=a(x0−c1)(x0−c2) ... (x0−cn).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. Build the degree 3 polynomial with real coefficients, zeros 3 and 1 + 2i, and point (0, −30). The complex conjugate pairs rule adds 1 − 2i; the three zeros fill the required degree.
  2. Use the Factor Theorem to turn zero 3 into x − 3. For the pair, use the conjugate-factor rule: (x − 1)2 + 22 = x2 − 2x + 5. Multiplying conjugates removes i because i2 = −1.
  3. Write f(x) = a(x − 3)(x2 − 2x + 5), with a nonzero. The linear factorization rule allows this multiplier because multiplying by a nonzero number preserves the zeros.
  4. Use the given point to substitute x = 0 and f(x) = −30: −30 = a(−3)(5) = −15a. Divide both sides by −15 to get a = 2. The point fixes the multiplier left open by the zeros.
  5. Give the factored form 2(x − 3)(x2 − 2x + 5). The question also asks for standard form, so distribute and collect like powers: f(x) = 2x3 − 10x2 + 22x − 30.
  6. Check every condition. The degree is 3 and the coefficients are real. Synthetic division with input 3 gives remainder 0 and quotient 2x2 − 4x + 10; the quadratic formula gives its zeros 1 ± 2i. Finally f(0) = −30, so the zeros and point agree with the question.

Worked example

Worked example

A cubic from a real zero, a complex zero and a point

Find the polynomial f(x) of degree 3 with real coefficients that has zeros 3 and 1 + 2i and whose graph passes through (0, −30). Give it in factored form and in standard form.

What it asks. Build a polynomial from zeros and a point.

02(x − 3)(x² − 2x +5)inputoutput−30
The finished polynomial must turn the input 0 into the output −30, and it does.
Show the steps and the answer

The plan. Build the factors, use the point to find the multiplier, and expand if asked.

  1. Plan. Build the factors, use the point to find the multiplier, and expand if asked.
  1. Say what is asked. Two zeros are given, the degree must be 3, the coefficients must be real numbers, and the input 0 must give the output −30. Find the one polynomial that does all of that.Knowing the target tells you when you are finished: three zeros, no i left in the answer, and f(0) = −30.
  2. Add the missing zero 1−2i. The full list is 3, 1+2i,1−2i.Nonreal zeros of a polynomial with real coefficients come as a complex conjugate pair, so 1 + 2i brings 1 − 2i with it. That makes three zeros, which matches degree 3.
  3. Turn the real zero into a factor: 3 gives (x−3).By the Factor Theorem, 3 is a zero exactly when (x − 3) is a factor. Plug 3 in to see it: 3 − 3 = 0.
  4. Turn the pair into one factor. Here p=1 and q=2, so the factor is (x−1)2+22=(x−1)2+4.(x − (1 + 2i))(x − (1 − 2i)) = ((x − 1) − 2i)((x − 1) + 2i) = (x − 1)2 − (2i)2 = (x − 1)2 − 4i2 = (x − 1)2 + 4, since i2 = −1.
  5. Expand it: (x−1)2+4=x2−2x+1+4=x2−2x+5.(x − 1)2 means (x − 1)(x − 1) = x2 − x − x + 1 = x2 − 2x + 1. Then add the 4.
  6. Put an unknown number a in front: f(x)=a(x−3)(x2−2x+5).The zeros do not fix the height of the graph. Multiplying by any nonzero a keeps every zero, so a stays unknown until the point is used.
  7. Use the point (0,−30): replace x with 0 and f(x) with −30. This gives −30=a(0−3)(02−2·0+5)=a(−3)(5)=−15a.The point says the input 0 gives the output −30. This step turns that fact into an equation whose only unknown is a.
  8. Solve −15a = −30 by dividing both sides by −15: a=2.Dividing undoes multiplying, and a negative divided by a negative is positive. Plug back to confirm: −15 · 2 = −30, which matches.
  9. Write the factored form: f(x)=2(x−3)(x2−2x+5).Every piece is now known: the factor from the real zero, the factor from the pair, and the number in front.
  10. Multiply the brackets: (x−3)(x2−2x+5)=x3−2x2+5x−3x2+6x−15=x3−5x2+11x−15.Multiply x by each of the three terms, then −3 by each of the three terms, then combine like terms: −2x2 − 3x2 = −5x2 and 5x + 6x = 11x.
  11. Multiply by a = 2: f(x)=2x3−10x2+22x−30.Saving a for last keeps the numbers small while the brackets are multiplied.
Answer
  • Factored form: f(x) = 2(x − 3)(x2 − 2x + 5)
  • Standard form: f(x) = 2x3 − 10x2 + 22x − 30
Double-check Run the search forward on the answer. Synthetic division of 2, −10, 22, −30 by 3 gives the bottom row 2, −4, 10, 0. The remainder is 0, so 3 is a zero. The quotient is 2x2 − 4x + 10 = 2(x2 − 2x + 5), and the quadratic formula on x2 − 2x + 5 gives x = 2±4−202 = 2±−162 = 2±4i2 = 1 ± 2i. The constant term −30 is f(0), so the graph passes through (0, −30).

The trap

Wrong: assume the multiplier is one. Right: use the given point to find it.

Quick check

Try it before you open its steps. It is question 5 of 9 in the full lesson, where they run from easy to exam-hard.

Try it · level 5 of 9

Degree 4, a pair, and a fraction in front

Find the polynomial f(x) of degree 4 with real coefficients that has zeros −1, 2 and 3i and satisfies f(1) = 10.

What it asks. Build a polynomial from zeros and a point.

Show the steps and the answer

The plan. Build the factors, use the point to find the multiplier, and expand if asked.

input xoutput f(x)−1011020↑ solve: output given, read every input above it
The two 0s in the output row sit under the real zeros −1 and 2, and the 10 sits under the input 1.
  1. Plan. Build the factors, use the point to find the multiplier, and expand if asked.
  1. Say what is asked. Three zeros are given, the coefficients are real, and f(1)=10 means the input 1 gives the output 10, which is the point (1, 10).A statement like f(1) = 10 is a point on the graph written another way.
  2. Add the conjugate −3i. The list is −1, 2, 3i, −3i.3i is 0 + 3i, so its conjugate is 0 − 3i. Four zeros match degree 4.
  3. Write the factors: (x+1), (x−2), and for the pair with p=0 and q=3,(x−0)2+32=x2+9.Each real zero c gives (x − c), and the pair gives (x − p)2 + q2.
  4. Write f(x)=a(x+1)(x−2)(x2+9).The number in front is unknown until the point is used.
  5. Use the point (1, 10): 10=a(1+1)(1−2)(12+9)=a(2)(−1)(10)=−20a.Replace x with 1 in every bracket and f(x) with 10. Then 2 · (−1) · 10 = −20.
  6. Divide both sides by −20: a=10−20=−12.Divide top and bottom by 10 to reduce the fraction. Plug back to confirm: −20 · (−12) = 10.
  7. Write f(x)=−12(x+1)(x−2)(x2+9).This is the factored form with every piece known.
  8. Multiply the brackets: (x+1)(x−2)=x2−x−2, then (x2−x−2)(x2+9)=x4+9x2−x3−9x−2x2−18=x4−x3+7x2−9x−18.Multiply each of the three terms by x2 and by 9, then combine 9x2 − 2x2 = 7x2.
  9. Multiply every term by −12: f(x)=−12x4+12x3−72x2+92x+9.Half of each coefficient, with every sign flipped. Half of −18 with the sign flipped is 9.
Answer
  • Factored form: f(x) = −12(x + 1)(x − 2)(x2 + 9)
  • Standard form: f(x) = −12x4 + 12x3 − 72x2 + 92x + 9
Double-check From the standard form, f(1) = −12 + 12 − 72 + 92 + 9 = 0 + 1 + 9 = 10. The bracket product x4 − x3 + 7x2 − 9x − 18 gives 1 + 1 + 7 + 9 − 18 = 0 at x = −1 and 16 − 8 + 28 − 18 − 18 = 0 at x = 2. At x = 3i the factor x2 + 9 is (3i)2 + 9 = −9 + 9 = 0, so f(3i) = 0, and the same holds at −3i.

7 Descartes' Rule of Signs

about 4 minOpen the full lessonOnly this lesson

The rule

Descartes' Rule of Signs.

Let f(x) be a polynomial with real coefficients, written from the highest power down, with missing terms skipped. (1) The number of positive real zeros equals the number of sign changes in f(x), or is less than that by an even number. (2) The number of negative real zeros equals the number of sign changes in f(−x), or is less than that by an even number.source 1 Zeros are counted with multiplicity, and a zero at x=0 belongs to neither group.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

How

  1. For f(x) = x3 − 4x2 + x + 6, keep the terms in descending powers, as Descartes’ Rule of Signs requires. The constant 6 is nonzero, so 0 is not a zero to count separately.
  2. Read the signs +, −, +, +. There are 2 changes between neighbors. Descartes’ rule gives 2 or 0 positive real zeros, counting repeats, because the count can drop by an even number.
  3. Substitute −x for x to study negative zeros. The rule for powers of a negative flips only odd-power terms: f(−x) = −x3 − 4x2 − x + 6. The even-power term and constant keep their signs.
  4. Read −, −, −, +: one change. Apply Descartes’ rule to f(−x), giving exactly 1 negative real zero. Subtracting 2 would give a negative count, which is impossible.
  5. Use the Fundamental Theorem’s degree count of 3. The possibilities are 2 positive, 1 negative, 0 nonreal; or 0 positive, 1 negative, 2 nonreal. The complex conjugate pairs rule requires an even nonreal count.
  6. Check against the worked example’s factorization f(x) = (x + 1)(x2 − 5x + 6) = (x + 1)(x − 2)(x − 3). The Factor Theorem gives zeros −1, 2 and 3: one negative and two positive, matching the first possibility. This separate check finds the actual count; the sign rule alone gave the possibilities.

Worked example

Worked example

Counting the possible positive and negative zeros of a cubic

Use Descartes' Rule of Signs on f(x) = x3 − 4x2 + x + 6. In plain words: without solving anything, say how many zeros could sit to the right of 0 and how many could sit to the left of 0.

What it asks. List possible positive and negative zero counts.

Show the steps and the answer

The plan. Count sign changes before and after replacing x with negative x; list options two apart.

f(x)=x3−4x2+x+6

signs: + − + +

changes: + to − (1), − to + (2)

positive real zeros: 2 or 0

f(−x)=−x3−4x2−x+6

signs: − − − +

changes: − to + (1)

negative real zeros: exactly 1

  1. Plan. Count sign changes before and after replacing x with negative x; list options two apart.
  1. Check the order: the powers run 3, 2, 1, then the constant.The rule reads the signs in order of the powers. Here the order is already right and no term is missing.
  2. Write the sign of each term: +x3,−4x2,+x,+6 gives the row +−++.Only the signs matter. The sizes 1, 4, 1 and 6 play no part in the count. The first term has no sign written, so it is +.
  3. Count the changes, one neighbor pair at a time: + to − is change 1, − to + is change 2, + to + is no change. Total: 2 sign changes.A sign change is a place where two terms side by side have opposite signs.
  4. Positive real zeros: 2 or 0.Descartes' Rule of Signs says the count is the number of sign changes, or less by an even number. 2 − 2 = 0, and a count cannot go below 0, so the list stops there.
  5. Build f(−x). Flip the sign of the odd power terms x3 and x, and keep −4x2 and +6: f(−x)=−x3−4x2−x+6.(−x)3 = −x3 and (−x) = −x, so those two terms flip. (−x)2 = x2, so the x2 term keeps its sign. The constant has no x in it, so it cannot change.
  6. Write the signs of f(−x): −−−+. Count: − to − is no change, − to − is no change, − to + is change 1. Total: 1 sign change.The same left to right reading, done on f(−x), reports on the left side of 0.
  7. Negative real zeros: exactly 1.The options are 1, then 1 − 2 = −1. A count cannot be negative, so 1 is the only option. One sign change always means exactly one zero on that side.
  8. List the full picture. The degree is 3, so there are 3 zeros in all. Either 2 positive +1 negative +0 nonreal, or 0 positive +1 negative +2 nonreal.The Fundamental Theorem of Algebra gives 3 zeros counted with multiplicity, and nonreal zeros come as a complex conjugate pair, so the leftover count must be 0 or 2. The table in this lesson shows both rows.
Answer
  • Positive real zeros: 2 or 0
  • Negative real zeros: exactly 1
  • The three zeros are either 2 positive and 1 negative, or 1 negative and 2 nonreal.
Double-check Find the zeros a second way and compare. The rule promises one negative zero, so test the negative candidates from the Rational Zero Theorem first. Synthetic division by x + 1 (so c = −1) on the coefficients 1, −4, 1, 6: bring down 1; −4 + (−1) = −5; 1 + 5 = 6; 6 + (−6) = 0. The remainder is 0, so −1 is a zero and the quotient is x2 − 5x + 6. Setting x2 − 5x + 6 = 0 finds the two zeros that are left: x = 5±25−242 = 5±12, so x = 3 or x = 2. The zeros are −1, 2 and 3: two positive and one negative. That is the first row of the table, so the counts agree.

The trap

Wrong: call the sign-change count exact. Right: list that count, then 2 less, then 4 less, stopping at 0 or 1.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Degree 4 with a full table of options

List every possible split of the zeros of f(x) = x4 + x3 − x2 + x − 2 into positive real, negative real and nonreal. In plain words: count both rows of signs, then make the options add up to 4.

What it asks. List possible positive and negative zero counts.

Show the steps and the answer

The plan. Count sign changes before and after replacing x with negative x; list options two apart.

degree 4: four zeros in all

Split A: 3 positive + 1 negative + 0 nonreal = 4

Split B: 1 positive + 1 negative + 2 nonreal = 4

the true one here: Split B (1, −2, i, −i)

  1. Plan. Count sign changes before and after replacing x with negative x; list options two apart.
  1. Write the signs of f(x): ++−+−. Count: + to + is no change, + to − is change 1, − to + is change 2, + to − is change 3. So 3 or 1 positive real zeros.Three sign changes allow 3 or 1.
  2. Build f(−x)=x4−x3−x2−x−2.The odd power terms flip: +x3 becomes −x3 and +x becomes −x. The terms x4, −x2 and −2 stay.
  3. Write the signs of f(−x): +−−−−. Count: + to − is change 1, then three pairs with no change. So exactly 1 negative real zero.One sign change is always exact.
  4. Fill the table. The degree is 4. Split A: 3 positive +1 negative +0 nonreal. Split B: 1 positive +1 negative +2 nonreal.Nonreal = 4 − positive − negative. Both rows give an even number, 0 or 2, as a complex conjugate pair requires.
Answer
  • Positive real zeros: 3 or 1
  • Negative real zeros: exactly 1
  • Split A: 3 positive, 1 negative, 0 nonreal
  • Split B: 1 positive, 1 negative, 2 nonreal
Double-check Find the zeros and see which split is true. Synthetic division by x − 1 on 1, 1, −1, 1, −2: bring down 1; 1 + 1 = 2; −1 + 2 = 1; 1 + 1 = 2; −2 + 2 = 0. The remainder is 0, so 1 is a zero, with quotient x3 + 2x2 + x + 2. Then divide that by x + 2 (so c = −2) on 1, 2, 1, 2: bring down 1; 2 + (−2) = 0; 1 + 0 = 1; 2 + (−2) = 0. The remainder is 0, so −2 is a zero, with quotient x2 + 1, whose zeros are i and −i. The zeros 1, −2, i and −i are split B, one of the two rows the rule listed.

8 Quick checks for the whole unit

8 questions

Quick check 1 of 8

What is the remainder when f(x) = x3 − 2x + 5 is divided by x − 2?

Show the steps and the answer
Answer
9. By the Remainder Theorem the remainder is f(2) = 8 − 4 + 5 = 9.

Quick check 2 of 8

Is x + 3 a factor of f(x) = x3 + x2 − 4x + 6?

Show the steps and the answer
Answer
Yes. x + 3 means c = −3, and f(−3) = −27 + 9 + 12 + 6 = 0, so the Factor Theorem says x + 3 is a factor.

Quick check 3 of 8

List every possible rational zero of f(x) = 3x3 − 4x2 + 2x − 5.

Show the steps and the answer
Answer
±1, ±5, ±13, ±53. Factors of the constant 5 go on top, and factors of the leading coefficient 3 go on the bottom.

Quick check 4 of 8

How many zeros does f(x) = 4x5 − x2 + 7 have in the complex numbers, counted with multiplicity?

Show the steps and the answer
Answer
5. The Fundamental Theorem of Algebra gives a polynomial of degree n exactly n zeros, and the degree here is 5.

Quick check 5 of 8

A polynomial with real coefficients has the zero 4 − 7i. Name another zero it must have.

Show the steps and the answer
Answer
4 + 7i. Nonreal zeros of a polynomial with real coefficients come as a complex conjugate pair.

Quick check 6 of 8

How many positive real zeros can f(x) = x3 + 3x2 − x − 3 have?

Show the steps and the answer
Answer
Exactly 1. The signs are +, +, −, −, with one change, and by Descartes' Rule of Signs the count 1 cannot drop by 2 without going below zero.

Quick check 7 of 8

Write the polynomial of degree 2 with leading coefficient 1 whose zeros are 3 and −5, in standard form.

Show the steps and the answer
Answer
x2 + 2x − 15. The factors are (x − 3) and (x + 5), and (x − 3)(x + 5) = x2 + 5x − 3x − 15.

Quick check 8 of 8

You divide a cubic by x − 2 and the bottom row of the synthetic division reads 1, −3, −10, 0. What are the other two zeros?

Show the steps and the answer
Answer
5 and −2. The quotient is x2 − 3x − 10, and the quadratic formula gives x = 3±492 = 3±72.