Quarry School

Trigonometry / Properties of the trigonometric functions

Properties of the trigonometric functions

Subject: Mathematics

All 10 lessons, in order.

The unit at a glance

  1. Sine and cosine: every input works, and the output stays between −1 and 1

    Picture a rider on a Ferris wheel with radius 1.

  2. Quadrantal angles: where tan, cot, sec and csc break

    Picture the rider stopping exactly above, below, right of, or left of the wheel's center.

  3. The range of tan, cot, sec and csc

    Think of pouring one full measuring cup into smaller scoops.

  4. Periodic functions: the values repeat every lap

    Think of a calendar.

  5. Signs of the six functions in the four quadrants

    Think of a town map with the center of town at the origin, the point (0, 0).

  6. Which quadrant is the angle in?

    To locate an angle, picture an address around a circular track.

  7. Increasing and decreasing: where sine and cosine rise and fall

    Think of climbing a staircase.

  8. Even and odd: what a minus sign inside does

    Imagine walking around a circular track.

  9. Combining properties to find signs and known exact values

    Think of reading a clock after several full days have passed.

  10. All six functions from one value and a quadrant

    Picture a ladder of length 1 reaching from the center of a circular track to its rim.

Rules (10)
  • Sine and cosine: every input works, and the output stays between −1 and 1

    For sin t and cos t: domain (−∞, ∞), all real numbers; range [−1, 1]. Thus −1 ≤ sin t ≤ 1 and −1 ≤ cos t ≤ 1. Absolute value |a| means a number's distance from 0, so the notes' |sin t| ≤ 1 and |cos t| ≤ 1 say the same thing.

  • Quadrantal angles: where tan, cot, sec and csc break

    tan t and sec t: t ≠ π2 + nπ, or t ≠ 90° + n·180°. cot t and csc t: t ≠ nπ, or t ≠ n·180°. An integer is a number such as −2, −1, 0, 1 or 2; n may be any integer. The notes write the same exclusions as π2 ± nπ and ±nπ. Every other real input is allowed.

  • The range of tan, cot, sec and csc

    tan t and cot t have range (−∞, ∞). sec t and csc t have range (−∞, −1] ∪ [1, ∞), meaning an output ≤ −1 or ≥ 1. To test a proposed secant or cosecant output v, first require v ≠ 0, then check that 1v belongs to [−1, 1].

  • Periodic functions: the values repeat every lap

    A positive repeat k preserves the domain in both directions and satisfies f(t + k) = f(t) wherever defined. A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: sin(t ± 2nπ) = sin t, and the same for cos, sec and csc; tan(t ± nπ) = tan t, and the same for cot. Degree repeats are 360° and 180°, respectively. In degrees, sin t = sin(t ± n·360°), with integer n; likewise cos, sec and csc.

  • Signs of the six functions in the four quadrants

    Inside a quadrant: I has all six positive. II has sin and csc positive. III has tan and cot positive. IV has cos and sec positive. Each unlisted function is negative. Axis points need their actual coordinates, because a value may be 0 or undefined.

  • Which quadrant is the angle in?

    I: 0 < t < π2. II: π2 < t < π. III: π < t < 3π2. IV: 3π2 < t < 2π. Reduce to 0 ≤ t < 2π, or 0° ≤ θ < 360°. A multiple of π2 or 90° lies on an axis, not in a quadrant.

  • Increasing and decreasing: where sine and cosine rise and fall

    On a chosen interval, increasing means x2 > x1 gives f(x2) > f(x1); decreasing means x2 > x1 gives f(x2) < f(x1). On [0, 2π], sin increases on [0, π2 ] and [ 3π2, 2π], and decreases on [ π2, 3π2 ]. cos decreases on [0, π] and increases on [π, 2π].

  • Even and odd: what a minus sign inside does

    An even or odd function has a domain that contains −t whenever it contains t. For every t in that domain, even means f(−t) = f(t), and odd means f(−t) = −f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.

  • Combining properties to find signs and known exact values

    Handle the input's minus sign, remove whole periods, identify a quadrant or an axis, then use a known exact value or a suitable identity. For an unfamiliar angle, the properties can determine a sign or a smaller equivalent expression without determining a special exact value.

  • All six functions from one value and a quadrant

    sin2θ + cos2θ = 1. Thus cos θ = ±1−sin2θ and sin θ = ±1−cos2θ, with the sign chosen by the quadrant. Then tan θ = sinθcosθ, cot θ = cosθsinθ, sec θ = 1cosθ, csc θ = 1sinθ, wherever the denominator is nonzero.

Recipes (10)
  • Sine and cosine: every input works, and the output stays between −1 and 1
    1. 1. Read the question: is it about an input t (domain) or about an output value (range)?
    2. 2. Domain of sin or cos: the answer is always yes, for any number in degrees or radians, positive or negative.
    3. 3. Range of sin or cos: check whether the value is between −1 and 1, endpoints included. If it is, yes; if it is bigger than 1 or smaller than −1, no.
    4. 4. Unmask disguised numbers before comparing: π ≈ 3.14 and 32 = 1.5 are outside, while 32 ≈ 0.87 is inside.
    5. Read a reference-table entry in the column under its input or category in the matching picture.
  • Quadrantal angles: where tan, cot, sec and csc break
    1. 1. If the angle is negative or at least a full turn, add or subtract full turns (2π or 360°) to bring it between 0 and 2π.
    2. 2. Check whether it is a quarter-turn mark: 0 gives (1, 0), π2 (90°) gives (0, 1), π (180°) gives (−1, 0), 3π2 (270°) gives (0, −1). If it is none of these, all six functions are defined.
    3. 3. On the y-axis (x = 0): tan and sec are undefined, while cot and csc have values.
    4. 4. On the x-axis (y = 0): cot and csc are undefined, while tan and sec have values. In a table, write 'undefined' or 'n/a', as the notes do.
    5. Read a reference-table entry in the column under its input or category in the matching picture.
  • The range of tan, cot, sec and csc
    1. 1. For a tangent or cotangent range question, answer yes for every real output.
    2. 2. For secant or cosecant, first reject 0 because its reciprocal is undefined.
    3. 3. For any other proposed output, ignore its sign and check its distance from 0.
    4. 4. A size of at least 1 is allowed. A size less than 1 is impossible.
    5. 5. To verify the decision, flip a nonzero proposed output. It must become an allowed sine or cosine between −1 and 1.
    6. Read a reference-table entry in the column under its input or category in the matching picture.
  • Periodic functions: the values repeat every lap
    1. 1. Identify the requested function and its period: 2π (360°) for sin, cos, sec and csc; π (180°) for tan and cot.
    2. 2. Add whole periods to a negative angle, or subtract them from an angle at least one period, until 0 ≤ reduced angle < period.
    3. 3. Use a known special or axis value if the reduced angle is one you know. Other angles may permit a sign decision without a familiar exact value.
    4. 4. The original expression has exactly the same output, sign included. If the reduced expression is undefined, the original one is also undefined.
    5. Read a reference-table entry in the column under its input or category in the matching picture.
  • Signs of the six functions in the four quadrants
    1. 1. If the question gives a quadrant, locate that region in the picture and write its x and y signs: I (+, +), II (−, +), III (−, −), IV (+, −).
    2. 2. Use sin t = y and cos t = x. A positive sign means an output greater than 0; a negative sign means an output less than 0.
    3. 3. Give csc the sign of sin, and sec the sign of cos. A reciprocal of a nonzero number keeps that number's sign.
    4. 4. Give tan and cot a positive sign when the x and y signs match, and a negative sign when they differ.
    5. 5. If the question gives signs and asks for location, list every quadrant and axis allowed by each condition, then keep their shared locations. For example, cosine positive allows I, IV and the positive x-axis; sine positive allows I, II and the positive y-axis. Do not drop an axis candidate until another condition excludes it.
    6. 6. If a condition says a value is 0 or undefined, check the four axis points before using the quadrant rows. For example, cos t = 0 means x = 0, so the point lies on the y-axis.
    7. 7. Memory device: All Students Take Calculus. In quadrant order, All, Sine, Tangent and Cosine are positive, each named function together with its reciprocal. This cue applies inside quadrants.
    8. Read a reference-table entry in the column under its input or category in the matching picture.
  • Which quadrant is the angle in?
    1. 1. Read the unit. A degree sign means degrees; without a degree sign the input is in radians.
    2. 2. If the angle is negative, add 360° or 2π until it is at least 0. If it is at least one full turn, subtract full turns until it is less than 360° or 2π. The final window includes 0 and excludes a full turn.
    3. 3. For degrees, compare with the exact boundaries 0°, 90°, 180°, 270°, 360°.
    4. 4. For a multiple of π, compare its coefficient with 0, 12, 1, 32, 2. This works because π is positive.
    5. 5. For a plain radian number, use π2 ≈ 1.5708, π ≈ 3.1416, 3π2 ≈ 4.7124, 2π ≈ 6.2832. Each decimal is rounded to four places. Keep enough precision to decide which side of the exact boundary the number is on.
    6. 6. Use the exact interval in the column under the chosen quadrant. If the angle equals a boundary, name the axis direction instead: 0 gives positive x, π2 positive y, π negative x, 3π2 negative y.
    7. Read a reference-table entry in the column under its input or category in the matching picture.
  • Increasing and decreasing: where sine and cosine rise and fall
    1. 1. Read what to compare: a larger angle is the larger input, but its sine or cosine may be a larger or smaller output.
    2. 2. Locate both angles. For a comparison by increasing or decreasing, both must lie in one interval where the requested function keeps the same direction of change.
    3. 3. Use the quadrant motion table, or combine neighboring quarters with the same direction: cosine decreases through I and II and increases through III and IV.
    4. 4. Increasing means the larger input gives the larger output. Decreasing means the larger input gives the smaller output.
    5. 5. If both angles are shifted by the same complete turn, their order is preserved. If you reduce them by different numbers of turns, compare the reduced inputs again before using the table. Their original order need not be the reduced order.
    6. 6. If the two values have opposite signs, the positive value is larger. If neither one interval nor signs decide the comparison, these rules alone are insufficient; use an additional taught exact-value fact.
    7. 7. Check the moving point: higher means larger sine; farther right means larger cosine. For negative outputs, a value closer to 0 is larger, such as −14 > −34.
    8. Read a reference-table entry in the column under its input or category in the matching picture.
  • Even and odd: what a minus sign inside does
    1. 1. Read the negative sign inside the function as an instruction to reverse the input.
    2. 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
    3. 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
    4. 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
    5. 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.
    6. Read a reference-table entry in the column under its input or category in the matching picture.
  • Combining properties to find signs and known exact values
    1. 1. Read whether the request is a location or a function value or sign. For a location, keep the original signed angle, reduce only by full turns of 2π or 360°, then use its terminal point and stop. Changing the sign of the angle or using a tangent half-period may change its location.
    2. 2. If the angle is negative, use even or odd symmetry and record any outside negative sign.
    3. 3. Remove whole periods: 2π or 360° for sin, cos, sec and csc; π or 180° for tan and cot.
    4. 4. Locate the reduced angle. If it is on an axis, use its coordinates and check denominators. Otherwise use the quadrant to determine the reduced expression's sign.
    5. 5. For a sign question, combine the reduced expression's sign with the outside sign and stop. For an exact-value question, use a known value or an identity. If neither applies, retain the exact expression instead of inventing a value.
    6. Read a reference-table entry in the column under its input or category in the matching picture.
  • All six functions from one value and a quadrant
    1. 1. Translate the request: one trig value and a quadrant are given; find each of the five other outputs.
    2. 2. Check the sign and range against the stated quadrant. Inside a quadrant both coordinates are nonzero: require 0 < |sin θ| < 1 and 0 < |cos θ| < 1, or |sec θ| > 1 and |csc θ| > 1. A given tangent or cotangent must be nonzero with the quadrant's sign. Reject an endpoint or zero that forces an axis.
    3. 3. If secant or cosecant is given, take its reciprocal to get cosine or sine. If tangent or cotangent is given, use its quotient formula to express sine in terms of cosine or cosine in terms of sine.
    4. 4. Substitute into sin2θ + cos2θ = 1. Solve for the missing square; this finds the coordinate's size without yet choosing its sign.
    5. 5. Take the nonnegative square root, then choose the coordinate's sign from the quadrant.
    6. 6. Use quotients and reciprocals for the other functions. Show division by fractions and any rationalizing.
    7. 7. Check the sum of the sine and cosine squares, every quadrant sign and the original given value.
    8. Read a reference-table entry in the column under its input or category in the matching picture.
Traps (10)
  • Sine and cosine: every input works, and the output stays between −1 and 1

    Mixing up the two questions. The domain is about the input t, and every t is allowed for sine and cosine. The range is about the output, which must be between −1 and 1. The input t = 5 is fine for sine; the output 5 is impossible.

  • Quadrantal angles: where tan, cot, sec and csc break

    Calling a 0 on top 'undefined'. 0−1 = 0 is an ordinary value. Only a 0 on the bottom breaks a function, so tan π = 0 is defined while cot π is undefined.

  • The range of tan, cot, sec and csc

    Writing the range of sec t or csc t as [−1, 1]. That is the range of their partners cos t and sin t. Flipping pushes every value outside: (−∞, −1] ∪ [1, ∞).

  • Periodic functions: the values repeat every lap

    Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −12, not sin 30° = 12. Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).

  • Signs of the six functions in the four quadrants

    A reciprocal keeps its partner's sign. csc follows sin, sec follows cos, and cot follows tan wherever both exist. Remember that the All Students Take Calculus cue excludes axis points.

  • Which quadrant is the angle in?

    A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly π2. A number close to a rounded landmark needs more digits before you choose a quadrant.

  • Increasing and decreasing: where sine and cosine rise and fall

    Decreasing does not mean negative. In II, sine decreases while staying positive. In IV, sine increases while staying negative. Also, reducing two angles by different numbers of turns can change their order, so compare their reduced inputs before using a direction rule.

  • Even and odd: what a minus sign inside does

    Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.

  • Combining properties to find signs and known exact values

    Losing the outside sign while reducing the input changes the expression. Carry it through every equality. Also check axis points before attempting a reciprocal: an undefined value cannot be fixed by moving a negative sign.

  • All six functions from one value and a quadrant

    Taking the sign from the square root. 1625 = 45 is positive, but in Quadrant IV sine is negative, so sin θ = −45. The quadrant decides the sign, never the square root.

Lesson 1 of 10

Sine and cosine: every input works, and the output stays between −1 and 1

Subject: MathematicsLeans on: Interval endpointsLeans on: Squaring a negativeOpen this lesson
Leans on 20Comes back in 0

1 In plain words

Picture a rider on a Ferris wheel with radius 1. You describe the rider with two numbers. The horizontal position is cosine, and the height above the center is sine. An input is the angle you turn through. The domain means all the inputs the function accepts. The range means all the outputs it can produce. You may turn through any angle, forward or backward, so sine and cosine accept every real number. You can turn for many laps, but the rider stays on the same wheel. The height and horizontal position stay between −1 and 1, including both ends.

Explain it like I am five

Picture a dog on a tight leash exactly 1 meter long, tied to a post. It can run any number of laps, either way, yet stays within 1 meter of the post. That circle of radius 1 is the unit circle. East-west position is the x-coordinate, north-south the y-coordinate; east and north count as positive, west and south as negative. Sine is opposite over hypotenuse, here north-south distance over leash, and the leash is 1, so sin t is the y-coordinate itself; likewise cos t is the x-coordinate.

Example: is t = 500 allowed? The input t is the distance walked along the circle. One lap is 2π, about 6.28, so 500 is about 79.6 laps. The walk still ends somewhere, so sin 500 exists: about −0.468 in radian mode. Could sin t be 1.3? No: the dog would be 1.3 meters north, past the leash's end.

So for sine and cosine the domain (all allowed inputs) is every real number, and the range (all possible outputs) is [−1, 1]: every number from −1 to 1, both ends included.

2 Picture it

x = cos θy = sin θP(cos t, sin t)
The point P(cos t, sin t) on the unit circle at 130°.
x = cos θy = sin θP(cos t, sin t)
The same picture again: The point P(cos t, sin t) on the unit circle at 130°.
input functionoutput domainsin t(−∞, ∞)cos t(−∞, ∞)
Both functions accept every real input.
input functionoutput rangesin t[−1, 1]cos t[−1, 1]
Both outputs stay between −1 and 1, including the endpoints.
input Functionoutput Domain (inputs allowed)sin tall real numbers, (−∞, ∞)cos tall real numbers, (−∞, ∞)
A table of 2 values of Domain (inputs allowed), for Function from sin t to cos t.
input Functionoutput Range (outputs possible)sin t[−1, 1]cos t[−1, 1]
Function: sin t, cos t; Range (outputs possible): [−1, 1], [−1, 1].

Reminder

Reminder: Interval endpoints, Squaring a negative
  • Interval endpoints. Square brackets include an endpoint: [−1, 1] includes both −1 and 1.
  • Squaring a negative. (−0.6)2 = (−0.6)(−0.6) = 0.36, because matching signs give a positive product.

3 Why

A walk of any length ends somewhere on the unit circle, and reading a coordinate never divides by anything. That gives every real input. Each point satisfies x2 + y2 = 1. Since x2 cannot be negative, y2 = 1 − x2 is at most 1, so −1 ≤ y ≤ 1. Interchanging x and y gives the same bound for x. These bounds give the entire range, rather than only limits: horizontal and vertical lines at any position between −1 and 1 meet the circle.

4 The rule

For sin t and cos t: domain (−∞,∞), all real numbers; range [−1,1].

Thus −1≤sint≤1 and −1≤cost≤1. Absolute value |a| means a number's distance from 0, so the notes' |sint|≤1 and |cost|≤1 say the same thing.

The same idea, five ways

Say it

Sine and cosine accept every real input and return a number from negative one through one.

Write it

The domain is all real numbers, and the range is the closed interval from −1 to 1.

In math
  • t is any real number
  • domain: (−∞, ∞)
  • range: [−1, 1]
  • −1≤sint≤1
  • −1≤cost≤1
  • On a graph, every input is allowed and every output height lies from −1 to 1.
  • {t | t is a real number}
  • {v|−1≤v≤1}
Like

A Ferris wheel can turn through any angle while its rider stays within one radius of the center.

See it
x = cos θy = sin θP(cos t, sin t)
Both coordinates of the rider stay within one radius of the center.

The same idea, other ways

As a wheel

You can rotate the wheel any number of turns. Its rider's height and horizontal reach stay within one radius of the center.

x = cos θy = sin θP(cos t, sin t)
The input can keep growing while the point stays on the same wheel.
As a machine

The domain is the machine's accepted input list. The range is its possible output list. The sine machine accepts 1000 radians, but it cannot return the height 1000.

1000 radiansread height onradius 1inputoutputa number in [−1, 1]
An unrestricted input does not mean an unrestricted output.
With numbers

The point (0.8, −0.6) is on the circle because 0.64 + 0.36 = 1. Its cosine is 0.8 and its sine is −0.6. Both fit in [−1, 1].

x = cos θy = sin θ(0.8, −0.6)
The point (0.8, −0.6) has horizontal position 0.8 and height −0.6.
Why the bound holds

If a height exceeded 1 in size, its square would exceed 1. Adding the nonnegative horizontal square could not make x2 + y2 equal 1.

x2+y2=1

x2≥0

y2≤1

FunctionDomain (inputs allowed)Range (outputs possible)
sin tall real numbers, (−∞, ∞)[−1,1]
cos tall real numbers, (−∞, ∞)[−1,1]

Part 1: Sine reads height

The sine output is the rider's height measured from the center. Above the center gives a positive height; below gives a negative height.

  • sin t = y.
  • Domain: (−∞, ∞).
  • Range: [−1, 1].
x = cos θy = sin θP(cos t, sin t)
At the top, sine reaches its largest output, 1.

Worked example

A height inside the wheel

The question asks whether the output −35 can be a sine value.

Show the steps and the answer
x = cos θy = sin θ(0.8, −0.6)
This circle point has the requested height −0.6.
  1. −35=−0.6, which is between −1 and 1.Converting the fraction makes its position clear.
  2. The point (0.8,−0.6) lies on the circle, so the height −0.6 occurs.0.82+(−0.6)2=0.64+0.36=1.
Answer
Yes. −35 is in the sine range.
Double-check The output's size is 35, which is less than 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The input must stay between −1 and 1 because the output must.
An angle input counts travel, while the output records a bounded coordinate.
✓ Instead: Every real input is accepted. Only the output is bounded.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 2: Cosine reads horizontal position

The cosine output measures how far right or left the rider sits from the center. Right is positive, and left is negative.

  • cos t = x.
  • Domain: (−∞, ∞).
  • Range: [−1, 1].
x = cos θy = sin θP(cos t, sin t)
At the far left, cosine reaches its smallest output, −1.

Worked example

A position beyond the rim

The question asks whether the output 75 can be a cosine value.

Show the steps and the answer

75=1.4

1.4 > 1

cos t cannot equal 1.4

  1. 75=1.4, which is greater than 1.Divide 7 by 5 to compare the proposed position with the radius.
  2. No circle point has horizontal coordinate 1.4.The radius is 1, so the circle's farthest right position is 1.
Answer
No. 75 is outside the cosine range.
Double-check A coordinate of 1.4 would already contribute 1.96 to x2 + y2, which cannot equal 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The input must stay between −1 and 1 because the output must.
An angle input counts travel, while the output records a bounded coordinate.
✓ Instead: Every real input is accepted. Only the output is bounded.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

5 How

  1. 1. Read the question: is it about an input t (domain) or about an output value (range)?
  2. 2. Domain of sin or cos: the answer is always yes, for any number in degrees or radians, positive or negative.
  3. 3. Range of sin or cos: check whether the value is between −1 and 1, endpoints included. If it is, yes; if it is bigger than 1 or smaller than −1, no.
  4. 4. Unmask disguised numbers before comparing: π ≈ 3.14 and 32 = 1.5 are outside, while 32 ≈ 0.87 is inside.
  5. Read a reference-table entry in the column under its input or category in the matching picture.

Deciding domain or range membership

1
Does the question ask about the domain?
YesTreat the number as an input angle. Every real input is accepted.
NoTreat the number as an output. Check whether −1 ≤ output ≤ 1.
↓
2
Is the output within [−1, 1]?
YesIt is in the range.
NoIt is outside the range.
  1. Decide whether the proposed number is an input angle or an output.
  2. For a sine or cosine input, answer yes for every real number.
  3. For an output, compare it with −1 and 1, including both endpoints.

6 Worked example

Worked example

Domain and range questions for sine and cosine

The question asks whether each proposed input or output is allowed. Answer yes or no. (a) Is t = 1265 in the domain of cos t? (b) Is −0.6 in the range of sin t? (c) Is 32 in the range of cos t? (d) Is 1 in the range of sin t?

Show the steps and the answer
x = cos θy = sin θ(0.8, −0.6)
The point (0.8, −0.6) shows that the proposed sine output −0.6 is possible.
−1−0.613/2
−0.6 and 1 belong to [−1, 1], while 1.5 lies outside it.
  1. (a) Yes. cos 1265 means: walk 1265 units around the unit circle and read the x-coordinate of the stopping point.The walk always ends somewhere, so the domain of cosine is all real numbers.
  2. (b) Yes. −0.6 is between −1 and 1.The range of sine is [−1, 1].
  3. (c) No. 32=1.5, which is bigger than 1.No point of the unit circle is 1.5 units to the right of the center; the rim is only 1 unit away.
  4. (d) Yes. At the top of the circle P=(0,1), so sin90°=1.1 is an endpoint, and the bracket in [−1, 1] includes it.
Answer
  • (a) yes
  • (b) yes
  • (c) no
  • (d) yes
Double-check For (b), find an actual point with height −0.6: (0.8, −0.6) is on the unit circle because 0.82 + (−0.6)2 = 0.64 + 0.36 = 1.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The input 5 is impossible because 5 > 1.
The bound applies to the output, rather than the input angle.
✓ Instead: sin 5 and cos 5 are defined because 5 is a real input.
✗ Not this: cos t = 32 is possible because 32 is a real number.
The cosine output is a horizontal coordinate on a circle of radius 1, so 1.5 is too far from the center.
✓ Instead: 32 is outside the range [−1, 1].

Tips and tricks

  • Write 'input' above a domain question and 'output' above a range question before comparing numbers.
  • For the range, picture the wheel inside a square whose edges are x = ±1 and y = ±1.

7 The trap

Mixing up the two questions. The domain is about the input t, and every t is allowed for sine and cosine. The range is about the output, which must be between −1 and 1. The input t = 5 is fine for sine; the output 5 is impossible.

Keep in mind

  • Domain is about the input and range about the output: t = 7 is a fine input for sine, but 7 is an impossible output.
  • Unmask disguised numbers before comparing with 1: 2 ≈ 1.41 and 75 = 1.4 are too big for sine or cosine, while −56 ≈ −0.83 fits.
  • Here x and y are the point's coordinates, signed distances measured along the axes, not the axes themselves: at the point (0.28, −0.96), cos t = 0.28 and sin t = −0.96, negative because the point is below the center.
  • The ends count: sin t = 1 at the top point (0, 1), because the square bracket in [−1, 1] includes 1.

Memory hook

Alphabetical order: the point is (cos t, sin t), since c comes before s as x comes before y. The 1 meter leash keeps both between −1 and 1.

Flash cards

Say the answer out loud, then flip.

What is the domain of a function?
All the inputs it accepts.
What are the domain and range of sin t and cos t?
  • Domain: all real numbers.
  • Range: [−1, 1].
Is −910 a possible value of sin t?
Yes: −0.9 is between −1 and 1.
Is 87 a possible value of cos t?
No: 87 ≈ 1.14, bigger than 1.
Is t = 25 an allowed input for sin t, even though 25 is bigger than 1?
Yes. The limit of 1 applies to the output, not the input.
On the unit circle, which coordinate is sin t and which is cos t?
  • sin t is y, the height.
  • cos t is x, the left-right position.

From earlier

The pieces of an angle and how to name them

What is a ray?
Show answer
A straight path with one endpoint that runs forever in one direction, like a flashlight beam.

An angle records a turn and its direction

What is the initial side of an angle?
Show answer
The ray where the turn starts: where the clock hand rests before it moves.

Lesson 2 of 10

Quadrantal angles: where tan, cot, sec and csc break

Subject: MathematicsLeans on: Coterminal reductionLeans on: Zero numeratorOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture the rider stopping exactly above, below, right of, or left of the wheel's center. These four positions lie on the coordinate axes, the two lines through the center. A quadrantal angle ends at one of those positions. Four trigonometric functions use division: tangent uses height divided by horizontal position, cotangent uses the opposite ratio, secant uses 1 divided by horizontal position, and cosecant uses 1 divided by height. Some of these divisions fail at an axis because the bottom becomes 0. The word undefined means there is no output for that input. The numerator, the number on top, may be 0 without causing that failure.

Explain it like I am five

Picture a clock hand that starts at 3 o'clock, pointing right; positive angles turn it counterclockwise, negative ones clockwise. A quadrantal angle stops the hand on an axis, one of the two lines through the center, at one of four points of the unit circle: (1, 0) at 3 o'clock, (0, 1) at 12, (−1, 0) at 9, (0, −1) at 6. Each point lists x first, then y.

Example: 810°. Remove two full laps: 810° − 720° = 90°, so the hand stops at 12 o'clock, where x = 0 and y = 1. Tangent, tan = yx, and secant, sec = 1x, both give 10: no answer. Cotangent, cot = xy = 01 = 0, and cosecant, csc = 1y = 1, are fine.

Why no answer? 10 asks what number times 0 gives 1, and every number times 0 is 0. That is undefined. A 0 on top is fine. So tan and sec break where x = 0, at 12 and 6 o'clock; cot and csc break where y = 0, at 3 and 9.

2 Picture it

−ππ−4−224−3π/2−π−π/2π/2π3π/2−4−224
y = tan x.
−ππ−4−224
The same picture again: y = tan x.
input toutput tan t00π/2undefinedπ03π/2undefined
This reference row shows tan at the four axis positions.
input toutput cot t0undefinedπ/20πundefined3π/20
This reference row shows cot at the four axis positions.
input toutput sec t01π/2undefinedπ−13π/2undefined
This reference row shows sec at the four axis positions.
input toutput csc t0undefinedπ/21πundefined3π/2−1
This reference row shows csc at the four axis positions.
input toutput P(x, y)0 (0°)(1, 0)π/2 (90°)(0, 1)π (180°)(−1, 0)3π/2 (270°)(0, −1)
A table of 4 values of P(x, y), for t from 0 (0°) to 3π2 (270°).
input toutput tan t = y/x0 (0°)0π/2 (90°)undefinedπ (180°)03π/2 (270°)undefined
A table of 4 values of tan t = y/x, for t from 0 (0°) to 3π2 (270°).
input toutput cot t = x/y0 (0°)undefinedπ/2 (90°)0π (180°)undefined3π/2 (270°)0
A table of 4 values of cot t = x/y, for t from 0 (0°) to 3π2 (270°).
input toutput sec t = 1/x0 (0°)1π/2 (90°)undefinedπ (180°)−13π/2 (270°)undefined
A table of 4 values of sec t = 1/x, for t from 0 (0°) to 3π2 (270°).
input toutput csc t = 1/y0 (0°)undefinedπ/2 (90°)1π (180°)undefined3π/2 (270°)−1
A table of 4 values of csc t = 1/y, for t from 0 (0°) to 3π2 (270°).

Reminder

Reminder: Coterminal reduction, Zero numerator
  • Coterminal reduction. A full turn leaves the terminal point unchanged: 630° − 360° = 270°.
  • Zero numerator. 0−1 = 0 because 0 × (−1) = 0; 10 has no value.

3 Why

Dividing 1 by 0 would require a number q with q × 0 = 1, but every number times 0 equals 0. At a unit-circle axis point, the nonzero coordinate is 1 or −1, so any zero denominator has a nonzero numerator. Horizontal position x is 0 at the top and bottom, a half turn apart. Height y is 0 at the right and left, also a half turn apart. These facts locate every excluded input, including negative angles and angles after many turns.

4 The rule

tan t and sec t: t≠π2+nπ, or t≠90°+n·180°.

cot t and csc t: t≠nπ, or t≠n·180°. An integer is a number such as −2,−1, 0, 1 or 2; n may be any integer. The notes write the same exclusions as π2±nπ and ±nπ. Every other real input is allowed.

The same idea, five ways

Say it

An excluded input makes the bottom of the function's fraction zero.

Write it

Tangent and secant exclude the y-axis angles; cotangent and cosecant exclude the x-axis angles.

In math
  • tan t = yx and sec t = 1x require x ≠ 0.
  • cot t = xy and csc t = 1y require y ≠ 0.
  • tan and sec: t ≠ π2 + nπ.
  • cot and csc: t ≠ nπ.
  • On the graph, an excluded input has no point.
  • {t | t ≠ π2 + nπ for every integer n}: tan and sec inputs.
  • {t | t ≠ nπ for every integer n}: cot and csc inputs.
Like

An input that asks for division by zero is like asking to share one item among zero groups.

See it
x = cos θy = sin θP(cos t, sin t)
At this y-axis point, x = 0 removes tangent and secant from their domains.

The same idea, other ways

As failed sharing

Dividing 1 item among 0 groups cannot produce a number per group: multiplying any proposed answer by 0 still gives 0 items.

12 ÷ 3 = 412 ÷ 2 = 612 ÷ 1 = 1212 ÷ 0 = ?0 groups: nowhere to put them, so no answer
There is no group size that makes zero groups contain one item.
From the wheel

At the top and bottom, horizontal position is 0, so any formula dividing by x fails. At the right and left, height is 0, so any formula dividing by y fails.

x = cos θy = sin θP(cos t, sin t)
At the top, x = 0 and y = 1, so tangent and secant have a zero denominator.
tP(x, y)tant=yxcot t = xysec t = 1xcsc t = 1y
0 (0°)(1, 0)0undefined1undefined
π2(90°)(0, 1)undefined0undefined1
π (180°)(−1,0)0undefined−1undefined
3π2(270°)(0,−1)undefined0undefined−1

Part 1: Tangent divides by horizontal position

Tangent compares height with horizontal reach. The denominator is x, so its failure points are on the vertical axis.

  • tant=yx=sintcost.
  • Domain excludes π2 + nπ, with integer n.
x = cos θy = sin θP(cos t, sin t)
Horizontal position is 0 at the vertical-axis positions.

Worked example

A defined zero tangent

The question asks whether tangent exists at 720°, and what its value is.

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
The height is 0, but the horizontal denominator is 1.
  1. 720°−2×360°=0°.Remove two full turns to locate the same terminal point.
  2. The point is (1, 0), so tan720°=01=0.The denominator is 1, so dividing is allowed.
Answer
tan 720° = 0.
Double-check The value 0 times the denominator 1 reproduces the numerator 0.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A 0 on top makes this function undefined.
A zero numerator is allowed if the bottom is nonzero.
✓ Instead: Write the definition and check its denominator; 01 = 0.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 2: Cotangent divides by height

Cotangent compares horizontal reach with height. Its denominator is y, so it fails on the horizontal axis.

  • cot t = xy = costsint.
  • Domain excludes nπ, with integer n.
  • cot t = 1tant applies where both functions are defined and tan t ≠ 0. The coordinate ratio still defines cot t at y-axis points where tan t fails.
x = cos θy = sin θP(cos t, sin t)
Height is 0 at the horizontal-axis positions.

Worked example

Cotangent can be zero

The question asks whether cotangent exists at 630°, and what its value is.

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
The cotangent numerator is 0 while its height denominator is −1.
  1. 630°−360°=270°.One full turn gives the same point inside a single turn.
  2. The point is (0,−1), so cot630°=0−1=0.The denominator is −1, so cotangent is defined.
Answer
cot 630° = 0.
Double-check At the same angle, tangent is −10 and is undefined. Use cotangent's own ratio, rather than taking a reciprocal of an undefined value.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A 0 on top makes this function undefined.
A zero numerator is allowed if the bottom is nonzero.
✓ Instead: Write the definition and check its denominator; 01 = 0.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 3: Secant divides 1 by horizontal position

Secant flips the horizontal coordinate. It fails wherever that coordinate is 0, exactly where tangent fails.

  • sec t = 1x = 1cost.
  • Domain excludes π2 + nπ, with integer n.
x = cos θy = sin θP(cos t, sin t)
Here x = 0, so secant cannot divide 1 by x.

Worked example

Secant at a vertical-axis point

The question asks whether secant exists at 450°.

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
The horizontal coordinate 0 makes secant undefined.
  1. 450°−360°=90°.Remove one full turn to identify the terminal point.
  2. At (0, 1), sec450° would be 10.Secant divides 1 by the horizontal coordinate x.
  3. Report undefined.No number multiplied by 0 gives the numerator 1.
Answer
sec 450° is undefined.
Double-check 450° = 90° + 2 × 180°, so it belongs to secant's excluded input list.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A 0 on top makes this function undefined.
A zero numerator is allowed if the bottom is nonzero.
✓ Instead: Write the definition and check its denominator; 01 = 0.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 4: Cosecant divides 1 by height

Cosecant flips the height coordinate. It fails wherever the height is 0, exactly where cotangent fails.

  • csc t = 1y = 1sint.
  • Domain excludes nπ, with integer n.
x = cos θy = sin θP(cos t, sin t)
Here y = 0, so cosecant cannot divide 1 by y.

Worked example

Cosecant at a horizontal-axis point

The question asks whether cosecant exists at 720°.

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
The height denominator is 0.
  1. 720°−2×360°=0°.Removing two turns leaves the same terminal point.
  2. At (1, 0), csc720° would be 10.Cosecant divides 1 by height y.
  3. Report undefined.No number times 0 gives 1.
Answer
csc 720° is undefined.
Double-check 720° is a multiple of 180°, so it is on cosecant's excluded input list.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A 0 on top makes this function undefined.
A zero numerator is allowed if the bottom is nonzero.
✓ Instead: Write the definition and check its denominator; 01 = 0.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

5 How

  1. 1. If the angle is negative or at least a full turn, add or subtract full turns (2π or 360°) to bring it between 0 and 2π.
  2. 2. Check whether it is a quarter-turn mark: 0 gives (1, 0), π2 (90°) gives (0, 1), π (180°) gives (−1, 0), 3π2 (270°) gives (0, −1). If it is none of these, all six functions are defined.
  3. 3. On the y-axis (x = 0): tan and sec are undefined, while cot and csc have values.
  4. 4. On the x-axis (y = 0): cot and csc are undefined, while tan and sec have values. In a table, write 'undefined' or 'n/a', as the notes do.
  5. Read a reference-table entry in the column under its input or category in the matching picture.

Finding whether a trigonometric function is defined

1
Does the terminal side lie on an axis?
YesRead the point from (1, 0), (0, 1), (−1, 0), (0, −1).
NoBoth x and y are nonzero, so all six functions are defined.
↓
2
Is the requested fraction's denominator 0?
YesExclude that input from the domain and write undefined.
NoThe function is defined. A zero numerator gives 0.
  1. Reduce the angle by full turns to the interval [0, 2π), or [0°, 360°).
  2. Find its terminal point if it is an axis angle.
  3. Write the requested function as a fraction of x and y.
  4. If the denominator is 0, report undefined. Otherwise divide.

6 Worked example

Worked example

Which functions are undefined?

The question asks which division formulas have a zero denominator at each angle. Which of tan t, cot t, sec t and csc t are undefined at (a) t = 3π and (b) t = −90°?

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
At 3π, the terminal point is (−1, 0), so formulas dividing by y fail.
x = cos θy = sin θP(cos t, sin t)
At −90°, the terminal point is (0, −1), so formulas dividing by x fail.
  1. (a) 3π is more than 2π, so subtract one full turn: 3π−2π=π.A full turn lands on the same point, so 3π and π share their point.
  2. The point for π is (−1,0): x=−1 and y=0.Half a turn from (1, 0) reaches the far left of the circle.
  3. y=0 is on the bottom of cott=xy and csct=1y, so those two are undefined. The other two have values: tan3π=0−1=0 and sec3π=1−1=−1.Only a 0 on the bottom breaks a fraction; a 0 on top gives the value 0.
  4. (b) −90° is a quarter turn clockwise, ending at the bottom of the circle, (0,−1): x=0 and y=−1.Negative angles turn clockwise, and a quarter turn is 90°.
  5. x=0 is on the bottom of tant=yx and sect=1x, so those two are undefined. cot(−90°)=0−1=0 and csc(−90°)=1−1=−1.Same rule: a 0 on the bottom means undefined.
Answer
  • (a) cot 3π and csc 3π are undefined.
  • (b) tan(−90°) and sec(−90°) are undefined.
Double-check Use the excluded lists: 3π = nπ with n = 3, which is excluded for cot and csc; −90° = 90° + n·180° with n = −1, which is excluded for tan and sec.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 4

Which of tan, cot, sec and csc break at −5π2 and at 540°?

For each angle, decide which of tan, cot, sec and csc are defined. Give the value of each one that is defined. Write 'undefined' for each one that is not. (a) t = −5π2 (b) t = 540°

Show the steps and the answer
  1. (a) Add full turns to −5π2. First get −5π2+2π=−π2. Then get −π2+2π=3π2.Adding 2π gives the same point on the unit circle. Two full turns bring the angle between 0 and 2π.
  2. (a) Note that 3π2 is a quarter-turn mark. Its point is (0,−1), so x=0 and y=−1.3π2 (270°) lands on the negative y-axis.
  3. (a) Take tant=yx=−10 and sect=1x=10. Both are undefined.On the y-axis x = 0, and x is the denominator of tan and sec.
  4. (a) Take cott=xy=0−1=0 and csct=1y=1−1=−1.For cot and csc the denominator is y = −1, which is not 0. So both have values.
  5. (b) Subtract one full turn: 540°−360°=180°.The angle is at least a full turn, so subtract 360° to bring it between 0° and 360°.
  6. (b) Note that 180° is a quarter-turn mark. Its point is (−1,0), so x=−1 and y=0.180° (π) lands on the negative x-axis.
  7. (b) Take cott=xy=−10 and csct=1y=10. Both are undefined.On the x-axis y = 0, and y is the denominator of cot and csc.
  8. (b) Take tant=yx=0−1=0 and sect=1x=1−1=−1.For tan and sec the denominator is x = −1, which is not 0. So both have values.
Answer
  • (a) At t = −5π2: tan is undefined and sec is undefined
  • cot = 0 and csc = −1. (b) At t = 540°: cot is undefined and csc is undefined
  • tan = 0 and sec = −1.
Double-check Use the rule. (a) −5π2 = π2 + nπ with n = −3, because π2 − 3π = −5π2. That is the exclusion for tan and sec. It is not of the form nπ, because −5π2 ÷ π = −2.5 is not an integer. So cot and csc are allowed. (b) 540° = n·180° with n = 3. That is the exclusion for cot and csc. Also (540° − 90°) ÷ 180° = 2.5 is not an integer, so tan and sec are allowed. Both parts agree with the answer.

Work to write

  1. (a) −5π2 + 2π + 2π = 3π2, point (0, −1)
  2. (a) x = 0 ⇒ tan = undefined, sec = undefined
  3. (a) cot = 0−1 = 0, csc = 1−1 = −1
  4. (b) 540° − 360° = 180°, point (−1, 0)
  5. (b) y = 0 ⇒ cot = undefined, csc = undefined
  6. (b) tan = 0−1 = 0, sec = 1−1 = −1

Rung 2 of 4

Which of tan, cot, sec and csc break at t = 11π2?

Let t = 11π2. Find tan t, cot t, sec t and csc t. Write 'undefined' for any function with no value at this input.

Show the steps and the answer
x = cos θy = sin θP
The angle 11π2 ends at the same place as 270°, at P(0, −1) on the negative y-axis.
  1. Bring the angle into one turn: 11π2−2π−2π=11π2−8π2=3π2. In degrees, 990°−720°=270°.11π2 is at least a full turn. Adding or subtracting whole turns of 2π does not change the point on the unit circle.
  2. Recognise 3π2 (270°) as a quarter-turn mark. Its point on the unit circle is (0,−1), so x=cost=0 and y=sint=−1.The quarter-turn marks are 0 → (1, 0), π2 → (0, 1), π → (−1, 0) and 3π2 → (0, −1).
  3. tant=yx=−10, which is undefined. sect=1x=10, which is also undefined.The point lies on the y-axis, where x = 0. Tan and sec both divide by x, and a zero on the bottom is a break.
  4. cott=xy=0−1=0. csct=1y=1−1=−1.Cot and csc divide by y = −1, which is not zero. A zero on top only makes the value 0.
Answer
tan 11π2 is undefined, sec 11π2 is undefined, cot 11π2 = 0 and csc 11π2 = −1.
Double-check Use the rule. Tan and sec exclude t = π2 + nπ, and 11π2 = π2 + 5π with n = 5, so both are excluded. Cot and csc exclude t = nπ, but 11π2 = 5.5π and 5.5 is not an integer, so both are defined. This agrees with the answer.

Work to write

  1. 11π2 − 4π = 3π2, which is coterminal with 270°
  2. Point on the unit circle: (0, −1), so x = 0 and y = −1
  3. tan t = −10, so it is undefined
  4. sec t = 10, so it is undefined
  5. cot t = 0−1 = 0
  6. csc t = 1−1 = −1

Rung 3 of 4

Reduce a degree angle

The question asks which of tangent and cosecant is undefined at 810°.

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
The top point excludes tangent but permits cosecant.
  1. 810°−2×360°=90°.Two full turns leave the same terminal point.
  2. At (0, 1), tan=10 is undefined, while csc=11=1.Tangent divides by x = 0; cosecant divides by y = 1.
Answer
  • tan 810° is undefined.
  • csc 810° = 1.
Double-check 810° = 90° + 4 × 180° belongs to tangent's excluded input list.

Rung 4 of 4

Solving for the inputs where tan(x + 30°) is undefined

Let f(x) = tan(x + 30°). Find every value of x with 0° ≤ x < 360° that is excluded from the domain of f, so that f(x) is undefined.

Show the steps and the answer
x = cos θy = sin θP
The angle u = x + 30° = 90° (when x = 60°) ends at P(0, 1) on the y-axis.
  1. Call the angle inside the function u, so u=x+30°. We need the values of u where tan u is undefined.The exclusion rule for tan applies to the whole angle tan acts on, not to x alone.
  2. Write the exclusion: tan u is undefined exactly when u=90°+n·180°, where n is any integer.tan u = yx uses the point (x, y) on the unit circle. It breaks on the y-axis, where x = 0. That happens at 90° and 270°, which are 180° apart.
  3. Set x+30°=90°+n·180°. Subtract 30° from both sides to get x=60°+n·180°.Solving the exclusion equation for x turns a statement about the angle into a statement about the input.
  4. Try integer values of n. n=0 gives x=60°. n=1 gives x=240°. n=2 gives x=420°, which is too large. n=−1 gives x=−120°, which is too small.Only the x values with 0° ≤ x < 360° are asked for, so we keep the ones that land in that interval.
  5. Check x=60°: the angle is u=60°+30°=90°, the quarter-turn mark at (0, 1). Check x=240°: u=240°+30°=270°, the quarter-turn mark at (0,−1).Both points lie on the y-axis, where x = 0. Step 3 of the method says tan is undefined there.
Answer
f(x) is undefined at x = 60° and x = 240°. In general, the excluded inputs are x = 60° + n·180°, where n is any integer.
Double-check At x = 60°, tan(90°) = 10, which is undefined. At x = 240°, tan(270°) = −10, which is also undefined. A nearby value has a value: x = 0° gives tan 30° = 33, so f is defined there. That is consistent with exclusions only at 60° and 240°.

Work to write

  1. u = x + 30°
  2. tan u is undefined when u = 90° + n·180°
  3. x + 30° = 90° + n·180°
  4. x = 60° + n·180°
  5. n = 0: x = 60°; n = 1: x = 240°
  6. x = 60° gives u = 90°, point (0, 1); x = 240° gives u = 270°, point (0, −1)
  7. Excluded: x = 60° and x = 240°

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: tan π is undefined because its numerator is 0.
A zero numerator gives the output 0 if the denominator is nonzero.
✓ Instead: tan π = 0−1 = 0; cot π has a zero denominator and is undefined.

Tips and tricks

  • Write the denominator before deciding whether the function exists: tan and sec divide by x; cot and csc divide by y.
  • Axes belong to neither neighboring quadrant. Check them separately.

7 The trap

Calling a 0 on top 'undefined'. 0−1 = 0 is an ordinary value. Only a 0 on the bottom breaks a function, so tan π = 0 is defined while cot π is undefined.

Keep in mind

  • A handwritten one-page cheat sheet rebuilds every domain yes or no from three lines: the axis points 0° (1, 0), 90° (0, 1), 180° (−1, 0), 270° (0, −1), with π = 180°; sin = y, cos = x, tan = yx, cot = xy, sec = 1x, csc = 1y; and 'zero on the bottom means undefined'.
  • Sine and cosine never break, because sin t = y and cos t = x involve no division: at 12 o'clock they are 1 and 0.
  • Remove laps before reading the point: −630° + 720° = 90°, so the hand points to 12 o'clock and tan(−630°) is undefined.
  • An axis angle sits in no quadrant, so read its point instead of the quadrant sign table: 0° is not in Quadrant I.

Memory hook

No 'co' (tan, sec): x on the bottom, broken at 12 and 6 o'clock. With 'co' (cot, csc): y on the bottom, broken at 3 and 9.

Flash cards

Say the answer out loud, then flip.

What is a quadrantal angle?
An angle that ends on an axis: a multiple of 90°, or of π2.
Why is 10 undefined?
No number times 0 gives 1.
Let t = 7π. Find tan t, cot t, sec t and csc t. Write 'undefined' for any function with no value at this input.
7π − 6π = π, so the point is (−1, 0), which lies on the x-axis. tan t = 0, sec t = −1, and cot t and csc t are undefined.
Is −990° in the domain of sec?
No: −990° + 1080° = 90°, where x = 0, and sec = 1x.
Find cot 1530° and csc 1530°.
  • 1530° − 4 × 360° = 90°, the point (0, 1).
  • cot 1530° = 01 = 0.
  • csc 1530° = 11 = 1.
Is cot 810° undefined because 810° ends on an axis?
No: at (0, 1), cot = 01 = 0. Only a 0 on the bottom breaks a function.

Lesson 3 of 10

The range of tan, cot, sec and csc

Subject: MathematicsLeans on: ReciprocalLeans on: UnionOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of pouring one full measuring cup into smaller scoops. A half-cup scoop fits twice, and a tenth-cup scoop fits ten times. That is how secant and cosecant work: each divides 1 by a coordinate whose size is at most 1. Their outputs therefore have size at least 1. They can be positive or negative, but they never fall strictly between −1 and 1. Tangent and cotangent compare one coordinate with the other. There is no limit on that comparison, because one coordinate may be very small while the other stays large. Their range, the list of possible outputs, includes every real number.

Explain it like I am five

Picture a sign giving a hill's steepness: flat is 0, a gentle climb 0.1, a cliff 50, downhill negative. Tangent, tan t = yx, is the steepness of the line from the center to the point, so it can be any number; so can cotangent, xy.

Secant and cosecant are flips: sec t = 1cost and csc t = 1sint. A flip, or reciprocal, is 1 divided by the number. Flipping a number no bigger than 1 in size gives one at least 1 in size: 1 ÷ 0.5 = 2 and 1 ÷ 0.1 = 10.

Example: can sec t = 0.4? Flip it back: cos t would be 1 ÷ 0.4 = 2.5, bigger than 1, so no. Can csc t = −2.5? Flip: sin t = 1 ÷ (−2.5) = −0.4, an allowed sine, so yes.

So the range, every possible output, of tan and cot is (−∞, ∞): all real numbers (∞ is infinity). For sec and csc it is (−∞, −1] ∪ [1, ∞), read '−1 or less, or 1 or more'.

2 Picture it

−ππ−4−224−3π/2−π−π/2π/2π3π/2−4−224
y = sec x, solid, beside y = cos x, dashed.
−ππ−4−224
The same picture again: y = sec x, solid, beside y = cos x, dashed.
−11(−∞, −1] ∪ [1, ∞)
(−∞, −1] and [1, ∞) on a number line.
input cos toutput sec t111/221/1010−1−1−1/2−2−1/10−10
Nonzero coordinate values of size at most 1 flip to outputs of size at least 1.
input Functionoutput Domainsin tall real numberscos tall real numberstan tt ≠ π/2 + nπ (t ≠ 90° + n·180°)cot tt ≠ nπ (t ≠ n·180°)sec tt ≠ π/2 + nπ (t ≠ 90° + n·180°)csc tt ≠ nπ (t ≠ n·180°)
A table of 6 values of Domain, for Function from sin t to csc t.
input Functionoutput Rangesin t[−1, 1]cos t[−1, 1]tan t(−∞, ∞)cot t(−∞, ∞)sec t(−∞, −1] ∪ [1, ∞)csc t(−∞, −1] ∪ [1, ∞)
A table of 6 values of Range, for Function from sin t to csc t.

Reminder

Reminder: Reciprocal, Union
  • Reciprocal. 1 ÷ 12 = 2 and 1 ÷ (−12) = −2; the reciprocal keeps the sign.
  • Union. (−∞, −1] ∪ [1, ∞) means an output at most −1 or at least 1.

3 Why

A nonzero cosine x with size at most 1 gives 1 ÷ x with size at least 1. Every output of size at least 1 occurs: its reciprocal is a nonzero number in [−1, 1], and some point has that cosine. The same argument works for cosecant and sine. For any proposed tangent output m, choose x = 1 ÷ 1+m2 and y = m ÷ 1+m2. Then x2 + y2 = 1 and y ÷ x = m. Exchanging these coordinates proves every real cotangent output occurs too.

4 The rule

tan t and cot t have range (−∞,∞).

sec t and csc t have range (−∞,−1]∪[1,∞), meaning an output ≤−1 or ≥1. To test a proposed secant or cosecant output v, first require v≠0, then check that 1v belongs to [−1,1].

The same idea, five ways

Say it

Tangent and cotangent can give any real output; secant and cosecant have outputs of size one or larger.

Write it

The reciprocal coordinate functions never produce an output strictly between −1 and 1.

In math
  • tan and cot range: (−∞, ∞).
  • sec and csc range: (−∞, −1] ∪ [1, ∞).
  • For v = sec t or v = csc t: v ≤ −1 or v ≥ 1.
  • For v = sec t or v = csc t: |v| ≥ 1.
  • On their graphs, secant and cosecant have no point at an output height strictly between −1 and 1.
  • {v | v ≤ −1 or v ≥ 1}: sec and csc outputs.
Like

A full cup contains at least one scoop whenever the scoop holds at most a full cup.

See it
−11(−∞, −1] ∪ [1, ∞)
The same picture again: (−∞, −1] and [1, ∞) on a number line.

The same idea, other ways

With measuring scoops

One cup contains two half-cup scoops or ten tenth-cup scoops. Dividing 1 by a positive amount at most 1 produces an answer at least 1.

1/11/21/10
Smaller positive divisors produce larger reciprocal outputs.
With negative coordinates

If cosine is −12, secant is −2. The sign stays negative while the size grows from one half to two.

input cos toutput sec t−1−1−1/2−2−1/10−10
A reciprocal keeps the sign and has size at least 1.
From the graph

Secant has a gap between output heights −1 and 1. Tangent crosses every possible output height on each unbroken graph piece between two neighboring excluded inputs.

range−ππ−4−224
Read the sec output vertically and the input horizontally.
Construct the output you want

For any real m, divide both (1, m) coordinates by r = 1+m2. The new squared coordinates sum to 11+m2 + m21+m2 = 1, and their ratio is m. Swapping them makes cotangent equal m. Because 1 + m2 > 0, the radius and the ratio's denominator are nonzero.

xyθx = 1y = 3rP(1, 3)Ox = 1 (1 right) y = 3 (3 up) r = √10.0 ≈ 3.2the ray from O through P (and beyond) = the terminal side
For m = 3, (1, 3) points in a direction whose tangent ratio is 3.
FunctionDomainRange
sin tall real numbers[−1,1]
cos tall real numbers[−1,1]
tan tt≠π2+nπ(t≠90°+n·180°)(−∞,∞)
cot tt ≠ nπ (t ≠ n·180°)(−∞,∞)
sec tt≠π2+nπ(t≠90°+n·180°)(−∞,−1]∪[1,∞)
csc tt ≠ nπ (t ≠ n·180°)(−∞,−1]∪[1,∞)

Part 1: Tangent can produce every real output

You can choose coordinates with any desired ratio. One coordinate may be 0, provided the coordinate on the bottom is nonzero.

  • tant=yx.
  • Range: (−∞, ∞).
xyθx = 2y = 5rP(2, 5)Ox = 2 (2 right) y = 5 (5 up) r = √29.0 ≈ 5.4the ray from O through P (and beyond) = the terminal side
The point P(2, 5) and its right triangle on the x axis.

Worked example

An output for tan

The question asks whether 2.5 can be an output of tan t.

Show the steps and the answer
xyθx = 2y = 5rP(2, 5)Ox = 2 (2 right) y = 5 (5 up) r = √29.0 ≈ 5.4the ray from O through P (and beyond) = the terminal side
The same picture again: The point P(2, 5) and its right triangle on the x axis.
  1. For the proposed tangent output 2.5, use the terminal-side point (2, 5).This point has nonzero x, so tangent is defined.
  2. Its ratio is 52=2.5.Tangent is y divided by x; scaling the point onto the unit circle leaves the ratio unchanged.
Answer
tan t = 2.5 is possible.
Double-check After scaling (2, 5), the squared coordinates add to 429 + 2529 = 1, so an actual unit-circle point has the requested tangent ratio.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Every real proposed output is allowed for every trigonometric function.
Sine and cosine are bounded, and secant and cosecant exclude the middle gap.
✓ Instead: Use this function's stated range before accepting the output.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 2: Cotangent can produce every real output

You can choose coordinates with any desired ratio. One coordinate may be 0, provided the coordinate on the bottom is nonzero.

  • cot t = xy.
  • Range: (−∞, ∞).
xyθx = −5y = 2rP(−5, 2)Ox = −5 (5 left) y = 2 (2 up) r = √29.0 ≈ 5.4the ray from O through P (and beyond) = the terminal side
The point P(−5, 2) and its right triangle on the x axis.

Worked example

An output for cot

The question asks whether −2.5 can be an output of cot t.

Show the steps and the answer
xyθx = −5y = 2rP(−5, 2)Ox = −5 (5 left) y = 2 (2 up) r = √29.0 ≈ 5.4the ray from O through P (and beyond) = the terminal side
The same picture again: The point P(−5, 2) and its right triangle on the x axis.
  1. For the proposed cotangent output −2.5, use the terminal-side point (−5,2).This point has nonzero y, so cotangent is defined.
  2. Its ratio is −52=−2.5.Cotangent is x divided by y; scaling the point keeps that ratio.
Answer
cot t = −2.5 is possible.
Double-check After scaling (−5, 2), the squared coordinates add to 2529 + 429 = 1, so an actual unit-circle point has the requested cotangent ratio.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Every real proposed output is allowed for every trigonometric function.
Sine and cosine are bounded, and secant and cosecant exclude the middle gap.
✓ Instead: Use this function's stated range before accepting the output.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 3: Secant leaves a middle gap

The horizontal position has size at most 1. Its nonzero reciprocal therefore has size at least 1.

  • sec t = 1cost.
  • Range: (−∞, −1] ∪ [1, ∞).

sec t = 43

cost=34

0<34<1

Worked example

An output for sec

The question asks whether 43 can be an output of sec t.

Show the steps and the answer

sec t = 43

cost=34

0<34<1

  1. If sect=43, then cost=34.Reciprocal partners flip one another wherever defined.
  2. 34 is nonzero and between −1 and 1.That is an allowed cosine, so the proposed secant occurs.
Answer
sec t = 43 is possible.
Double-check The point (34, 74) is on U because 916 + 716 = 1. Its nonzero cosine 34 gives secant 43.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Every real proposed output is allowed for every trigonometric function.
Sine and cosine are bounded, and secant and cosecant exclude the middle gap.
✓ Instead: Use this function's stated range before accepting the output.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 4: Cosecant leaves a middle gap

The height has size at most 1. Its nonzero reciprocal therefore has size at least 1.

  • csc t = 1sint.
  • Range: (−∞, −1] ∪ [1, ∞).

csc t = −43

sint=−34

−1<−34<0

Worked example

An output for csc

The question asks whether −43 can be an output of csc t.

Show the steps and the answer

csc t = −43

sint=−34

−1<−34<0

  1. If csct=−43, then sint=−34.Reciprocals keep their negative sign.
  2. −34 is nonzero and lies between −1 and 1.That is an allowed sine, so the proposed cosecant occurs.
Answer
csc t = −43 is possible.
Double-check The point (74, −34) is on U because 716 + 916 = 1. Its nonzero sine −34 gives cosecant −43.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Every real proposed output is allowed for every trigonometric function.
Sine and cosine are bounded, and secant and cosecant exclude the middle gap.
✓ Instead: Use this function's stated range before accepting the output.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

5 How

  1. 1. For a tangent or cotangent range question, answer yes for every real output.
  2. 2. For secant or cosecant, first reject 0 because its reciprocal is undefined.
  3. 3. For any other proposed output, ignore its sign and check its distance from 0.
  4. 4. A size of at least 1 is allowed. A size less than 1 is impossible.
  5. 5. To verify the decision, flip a nonzero proposed output. It must become an allowed sine or cosine between −1 and 1.
  6. Read a reference-table entry in the column under its input or category in the matching picture.

Testing an output against a range

1
Is the function tangent or cotangent?
YesEvery real output is in its range.
NoFor secant or cosecant, continue to the size check.
↓
2
Is the proposed output 0?
YesReject it. A reciprocal of a nonzero coordinate never equals 0.
NoAccept if its distance from 0 is at least 1; otherwise reject.
  1. Identify the requested function.
  2. For tan or cot, accept every real proposed output.
  3. For sec or csc, reject 0, then compare the output's size with 1.
  4. As a second check for a nonzero output, take its reciprocal and compare with [−1, 1].

6 Worked example

Worked example

Range questions for the other four

The question asks whether each proposed output can occur. Answer yes or no. (a) Is 0.5 in the range of sec t? (b) Is −3 in the range of csc t? (c) Is 250 in the range of tan t? (d) Is −1 in the range of csc t?

Show the steps and the answer
−11(−∞, −1] ∪ [1, ∞)
The same picture a third time: (−∞, −1] and [1, ∞) on a number line.

sec t = 0.5 would require cos t = 2

csc t = −3 requires sin t = −13

csc t = −1 occurs at sin t = −1

  1. (a) No. If sect=0.5, then cost=1÷0.5=2, and no point of the unit circle has x=2.sec t and cos t are reciprocals, and cos t can never be bigger than 1.
  2. (b) Yes. If csct=−3, then sint=−13, which is between −1 and 1, so such a t exists.Flip the value back to a sine and check that it is an allowed sine.
  3. (c) Yes. Tangent takes every real value.As the point approaches the top through Quadrant I, x approaches 0 through positive values while y approaches 1. The positive ratio y ÷ x therefore exceeds any fixed positive number; the point construction also supplies 250 exactly.
  4. (d) Yes. csct=−1 when sint=−1, which happens at t=3π2 (270°).−1 is an endpoint, and the bracket in (−∞, −1] includes it.
Answer
  • (a) no
  • (b) yes
  • (c) yes
  • (d) yes
Double-check For a nonzero secant or cosecant output, its reciprocal must be in [−1, 1]: 1 ÷ 0.5 = 2 fails; 1 ÷ (−3) = −13 passes; 1 ÷ (−1) = −1 passes. The proposed output 0 always fails before this test, because 1 ÷ 0 is undefined.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: sec t = 0 is possible because 0 is in the cosine range.
Secant is 1 divided by a nonzero cosine. Such a reciprocal cannot equal 0.
✓ Instead: 0 is outside the secant range. The flip test starts by rejecting 0.

Tips and tricks

  • Draw a gap between −1 and 1 for secant and cosecant; fill the endpoints.
  • Name the proposed output before testing it. Its range membership is separate from whether an angle is in the domain.

7 The trap

Writing the range of sec t or csc t as [−1, 1]. That is the range of their partners cos t and sin t. Flipping pushes every value outside: (−∞, −1] ∪ [1, ∞).

Keep in mind

  • Test a secant or cosecant value by its flip, not against [−1, 1]: sec t = 2.5 is possible because its flip, 0.4, is an allowed cosine, while sec t = 0.4 is not.
  • Only sine and cosine are stuck between −1 and 1: tan t = 40 and cot t = −40 are both possible.
  • Judge sec and csc by size, not sign: csc t = −1.5 is possible because its size, 1.5, is at least 1.
  • The edges count: csc t = −1 when sin t = −1, since 1 ÷ (−1) = −1, so the brackets at −1 and 1 are square.

Memory hook

Slopes go anywhere; flips stay outside. Tan and cot take every number. To test a sec or csc value, flip it: the flip must land in [−1, 1].

Flash cards

Say the answer out loud, then flip.

What is a reciprocal?
1 divided by the number: the reciprocal of 0.05 is 20.
What does ∪ mean in (−∞, −1] ∪ [1, ∞)?
Union, read 'or': at most −1, or at least 1.
Range of tan t? Range of sec t?
  • tant:(−∞,∞).
  • sec t: (−∞, −1] ∪ [1, ∞).
Can csc t = 0.9?
No: the flip gives sin t = 109 ≈ 1.11, bigger than 1.
Can sec t = −3?
Yes: the flip gives cos t = −13, between −1 and 1.
Is the range of sec t the same as the range of cos t?
  • No.
  • cost:[−1,1].
  • sec t: (−∞, −1] ∪ [1, ∞).

Lesson 4 of 10

Periodic functions: the values repeat every lap

Subject: MathematicsLeans on: Common denominatorsLeans on: Signs in a quotientLeans on: Integer multiplesOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of a calendar. Seven days after a Monday, the weekday is Monday again. A periodic function repeats its outputs after a fixed positive change in its input. On the unit circle, turning one full lap brings the rider to the same position. The coordinates, and every function built from them, repeat. One lap is 2π radians or 360°. Sine, cosine, secant and cosecant need that full lap for their shortest repeat, called the period. Tangent and cotangent repeat after half a lap, π radians or 180°, because both coordinates reverse sign together and their ratio stays the same.

Explain it like I am five

Picture the hour hand of a clock: every 12 hours it is back in the same spot. A periodic function works the same way. Slide the input forward by a fixed step k and the output repeats: f(t + k) = f(t), read 'f of t plus k equals f of t'. The smallest such step is the period.

On the unit circle one full lap is 360°, or 2π (two pi). A full lap returns the point to the same spot, so all six values repeat. Angles that end in the same place, such as 60° and 420°, are coterminal; they share every value, so you can trade a big angle for a small one you know.

Example: cos 1140°. Count laps: 1140 ÷ 360 ≈ 3.17 (≈ means about), so remove 3 × 360° = 1080°, leaving 60°. So cos 1140° = cos 60° = 12.

Tangent and cotangent repeat sooner, every half lap (180°, or π). A half turn sends the point (x, y) to (−x, −y), and −y−x = yx because the two minus signs cancel.

2 Picture it

30°390°same terminal side
30° and 390° end on the same terminal side.
30°390°same terminal side
The same picture again: 30° and 390° end on the same terminal side.
input functionoutput periodsin t2π (360°)cos t2π (360°)tan tπ (180°)cot tπ (180°)sec t2π (360°)csc t2π (360°)
Coordinate functions and their reciprocals repeat after a full lap; ratios repeat after a half lap.
input functionoutput periodsin t2π (360°)cos t2π (360°)tan tπ (180°)cot tπ (180°)sec t2π (360°)csc t2π (360°)
Read the period in the column under the function.

Reminder

Reminder: Common denominators, Signs in a quotient, Integer multiples
  • Common denominators. For sixths of π, 2π = 12π6, so 25π6 − 2π = 13π6.
  • Signs in a quotient. −3−2 = 32 because two negative signs cancel.
  • Integer multiples. Three periods of tangent in radians are 3π; three full laps are 6π.

3 Why

The circle's circumference, its distance around the rim, is 2π × 1 = 2π, so a full lap restores both coordinates and every allowed division built from them. A half lap sends (x, y) to (−x, −y). Thus −y−x = yx and −x−y = xy, proving the shorter tangent and cotangent repeats. The other four change sign after half a lap, so that repeat fails. To prove these are the shortest periods, compare repeated maximum values or repeated zero values, as the individual parts below show.

4 The rule

A positive repeat k preserves the domain in both directions and satisfies f(t+k)=f(t) wherever defined.

A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: sin(t±2nπ)=sint, and the same for cos, sec and csc; tan(t±nπ)=tant, and the same for cot. Degree repeats are 360° and 180°, respectively. In degrees, sint=sin(t±n·360°), with integer n; likewise cos, sec and csc.

The same idea, five ways

Say it

A periodic function repeats after a fixed positive change in its input.

Write it

Adding or subtracting whole periods preserves the value and keeps permitted inputs permitted.

In math
  • f(t + k) = f(t) for a positive repeat k.
  • sin(t ± 2nπ) = sin t, with integer n; likewise cos, sec and csc.
  • tan(t ± nπ) = tan t, with integer n; likewise cot.
  • Coordinate and reciprocal periods: 2π = 360°.
  • Ratio periods: π = 180°.
  • On a graph, the same shape returns after a horizontal shift of one period.
Like

A weekday repeats after seven days even while the date number changes.

See it
one periodπ2π3π4π−11
The sine output pattern returns after a horizontal change of 2π.

The same idea, other ways

As a calendar

Adding 7 days preserves the weekday. Adding 360° preserves a point on the wheel. The extra travel changes the input while the output repeats.

30°390°same terminal side
An extra full lap preserves the terminal point.
As coordinates

A half lap changes (x, y) into (−x, −y). Sine and cosine change sign, but tangent and cotangent divide two negatives and keep their values.

x = cos θy = sin θP(cos t, sin t)
The point opposite 60° has both coordinates negated.
With numbers

Sine at 30°, 390° and 750° is 12 each time. Tangent at 60° and 240° is 3; the half-lap ratio does not change.

input angleoutput sine30°1/2390°1/2750°1/2
The same output repeats after each full lap.
Why shortest matters

An output matching at one pair of inputs does not establish a period. The change must work at every permitted input. A constant function, such as f(t) = 3, repeats after every positive change, so it is periodic without a smallest positive period.

−224681234
A constant output repeats after every positive input change, so no smallest repeat exists.
Functionsin tcos ttan tcot tsec tcsc t
Period2π (360°)2π (360°)π (180°)π (180°)2π (360°)2π (360°)

Part 1: Sine repeats height

A full lap returns the rider to the same height. Half a lap usually puts the rider at the opposite height.

  • sin(t + 2π) = sin t.
  • Period: 2π, or 360°.
  • Any sine period k must give sin k = sin 0 = 0, so k is a multiple of π. The candidate π fails at t = π2, so 2π is the smallest positive repeat.
30°1110°same terminal side
30° and 1110° end on the same terminal side.

Worked example

A repeat of sin

The question asks for the unchanged output after removing periods. Find sin 1110°.

Show the steps and the answer
30°1110°same terminal side
The same picture again: 30° and 1110° end on the same terminal side.
  1. 1110°−3×360°=30°.Remove 3 whole periods of 360°; the output is preserved.
  2. sin1110°=sin30°=12.sin30°=12
Answer
sin1110°=12.
Double-check The angle difference is 1080°, exactly 3 periods of 360°.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A matching output at one pair of inputs proves the period.
A period must preserve every allowed input's output and domain.
✓ Instead: Use the full coordinate or ratio argument and the least-period test.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 2: Cosine repeats horizontal position

A full lap returns the rider to the same horizontal position. A half lap reverses that position.

  • cos(t + 2π) = cos t.
  • Period: 2π, or 360°.
  • At t = 0, cosine is 1. The next angle with cosine 1 is 2π, so no smaller positive shift can repeat every cosine value.
60°1500°same terminal side
60° and 1500° end on the same terminal side.

Worked example

A repeat of cos

The question asks for the unchanged output after removing periods. Find cos 1500°.

Show the steps and the answer
60°1500°same terminal side
The same picture again: 60° and 1500° end on the same terminal side.
  1. 1500°−4×360°=60°.Remove 4 whole periods of 360°; the output is preserved.
  2. cos1500°=cos60°=12.cos60°=12
Answer
cos1500°=12.
Double-check The angle difference is 1440°, exactly 4 periods of 360°.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A matching output at one pair of inputs proves the period.
A period must preserve every allowed input's output and domain.
✓ Instead: Use the full coordinate or ratio argument and the least-period test.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 3: Tangent repeats after a half lap

A half lap reverses both coordinates. Height divided by horizontal position keeps its value because both signs reverse.

  • tan(t + π) = tan t wherever defined.
  • Period: π, or 180°.
  • At t = 0, tangent is 0. Its next zero is π, so a smaller positive shift cannot repeat all tangent values.
−ππ−4−224
y = tan x.

Worked example

A repeat of tan

The question asks for the unchanged output after removing periods. Find tan 1140°.

Show the steps and the answer
−ππ−4−224
The same picture again: y = tan x.
  1. 1140°−6×180°=60°.Remove 6 whole periods of 180°; the output is preserved.
  2. tan1140°=tan60°=3.tan60°=(32)÷12=3
Answer
tan1140°=3.
Double-check The angle difference is 1080°, exactly 6 periods of 180°.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A matching output at one pair of inputs proves the period.
A period must preserve every allowed input's output and domain.
✓ Instead: Use the full coordinate or ratio argument and the least-period test.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 4: Cotangent repeats after a half lap

Horizontal position divided by height also keeps its value after both coordinates reverse sign.

  • cot(t + π) = cot t wherever defined.
  • Period: π, or 180°.
  • At t = π2, cotangent is 0. Its next zero is 3π2, a distance π later, so no smaller positive shift repeats all its values.
−ππ−4−224
y = cot x.

Worked example

A repeat of cot

The question asks for the unchanged output after removing periods. Find cot 1305°.

Show the steps and the answer
−ππ−4−224
The same picture again: y = cot x.
  1. 1305°−7×180°=45°.Remove 7 whole periods of 180°; the output is preserved.
  2. cot1305°=cot45°=1.cot 45° = (22) ÷ 22 = 1
Answer
cot 1305° = 1.
Double-check The angle difference is 1260°, exactly 7 periods of 180°.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A matching output at one pair of inputs proves the period.
A period must preserve every allowed input's output and domain.
✓ Instead: Use the full coordinate or ratio argument and the least-period test.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 5: Secant repeats its horizontal reciprocal

A full lap restores cosine, so it restores secant. A half lap changes cosine's sign and therefore secant's sign.

  • sec(t + 2π) = sec t wherever defined.
  • Period: 2π, or 360°.
  • At t = 0, secant is 1. That requires cosine 1, which next occurs at 2π. A smaller positive shift cannot repeat all secant values.
60°1500°same terminal side
The same picture a third time: 60° and 1500° end on the same terminal side.

Worked example

A repeat of sec

The question asks for the unchanged output after removing periods. Find sec 1500°.

Show the steps and the answer
60°1500°same terminal side
The same picture, shown 4 times now: 60° and 1500° end on the same terminal side.
  1. 1500°−4×360°=60°.Remove 4 whole periods of 360°; the output is preserved.
  2. sec1500°=sec60°=2.sec 60° = 1 ÷ 12 = 2
Answer
sec 1500° = 2.
Double-check The angle difference is 1440°, exactly 4 periods of 360°.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A matching output at one pair of inputs proves the period.
A period must preserve every allowed input's output and domain.
✓ Instead: Use the full coordinate or ratio argument and the least-period test.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

Part 6: Cosecant repeats its height reciprocal

A full lap restores sine, so it restores cosecant. A half lap reverses the sign of both sine and cosecant.

  • csc(t + 2π) = csc t wherever defined.
  • Period: 2π, or 360°.
  • At t = π2, cosecant is 1. Sine next returns to 1 at 5π2, a distance 2π later, so no smaller positive shift repeats all its values.
30°1110°same terminal side
The same picture a third time: 30° and 1110° end on the same terminal side.

Worked example

A repeat of csc

The question asks for the unchanged output after removing periods. Find csc 1110°.

Show the steps and the answer
30°1110°same terminal side
The same picture, shown 4 times now: 30° and 1110° end on the same terminal side.
  1. 1110°−3×360°=30°.Remove 3 whole periods of 360°; the output is preserved.
  2. csc1110°=csc30°=2.csc 30° = 1 ÷ 12 = 2
Answer
csc 1110° = 2.
Double-check The angle difference is 1080°, exactly 3 periods of 360°.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A matching output at one pair of inputs proves the period.
A period must preserve every allowed input's output and domain.
✓ Instead: Use the full coordinate or ratio argument and the least-period test.
Tips and tricks
  • Use this object's defining formula to check the example before relying on a remembered pattern.

5 How

  1. 1. Identify the requested function and its period: 2π (360°) for sin, cos, sec and csc; π (180°) for tan and cot.
  2. 2. Add whole periods to a negative angle, or subtract them from an angle at least one period, until 0 ≤ reduced angle < period.
  3. 3. Use a known special or axis value if the reduced angle is one you know. Other angles may permit a sign decision without a familiar exact value.
  4. 4. The original expression has exactly the same output, sign included. If the reduced expression is undefined, the original one is also undefined.
  5. Read a reference-table entry in the column under its input or category in the matching picture.

Reducing an angle by a function's period

1
Is the function tangent or cotangent?
YesUse π radians or 180°.
NoUse 2π radians or 360°.
↓
2
Is the input negative?
YesAdd periods until 0 ≤ input.
NoKeep the input and consider whether it is too large.
↓
3
Is the input at least one period?
YesSubtract periods until the input is below one period.
NoUse the resulting input as it stands.
  1. Identify the function and choose its period in the input's unit.
  2. For a negative angle, add whole periods until the result is at least 0.
  3. For an angle at least one period, subtract whole periods until the result is below one period.
  4. Evaluate the reduced angle if its value is known. If it is not a known exact angle, the reduction still helps locate its sign.

6 Worked example

Worked example

Reducing a negative radian angle and a large degree angle by whole periods

Find the exact value of each expression without a calculator. (a) sin(−17π6) (b) tan(1110°)

Show the steps and the answer
30°1110°same terminal side
The angles 30° and 1110° share a terminal side, because 1110° = 30° + 3·360°. So tan(1110°) = tan 30° = 3/3.
  1. (a) The function is sine, so the period is 2π=12π6.sin(t ± 2nπ) = sin t for every integer n, and 2π is the smallest positive repeat of sine.
  2. (a) The angle is negative, so add whole periods. Add 2π once: −17π6+12π6=−5π6. This is still negative, so add 2π again: −5π6+12π6=7π6. Now 0≤7π6<2π.Adding two whole periods (n = 2) moves the angle into the interval from 0 to one period without changing the sine value.
  3. (a)sin(7π6)=−12.7π6 is the special angle π6 past π, in Quadrant III. There sine is negative and the reference value is sin(π6) = 12.
  4. (a) So sin(−17π6)=sin(7π6)=−12.The original expression has exactly the same output as the reduced one, sign included.
  5. (b) The function is tangent, so the period is 180°.tan(t ± n·180°) = tan t for every integer n. Tangent repeats every half lap, not every full lap.
  6. (b) The angle is at least one period, so subtract whole periods. 1110°÷180° is 6 with remainder 30°, so subtract 6 periods: 1110°−6·180°=1110°−1080°=30°. Now 0°≤30°<180°.Subtracting six whole periods (n = 6) gives the reduced angle in the interval from 0° up to one period.
  7. (b)tan(30°)=13=33, so tan(1110°)=33.30° is a special angle with tan 30° = sin30°cos30° = 1/23/2. The original expression has the same value and the same sign.
Answer
(a)sin(−17π6)=−12(b)tan(1110°)=33
Double-check (a) Convert to degrees: −17π6 = −510°. Adding 2·360° gives −510° + 720° = 210°, which is in Quadrant III, and sin 210° = −12. This matches. (b) Using full laps instead: 1110° − 3·360° = 30°, so 1110° is coterminal with 30° and tan(1110°) = tan 30° = 33. This agrees with the half-lap reduction.

Work to write

  1. sine has period 2π; tangent has period 180°
  2. −17π6+2·2π=7π6
  3. sin(−17π6)=sin(7π6)=−12
  4. 1110°−6·180°=30°
  5. tan(1110°)=tan30°=33

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 5

Remove one full lap

The question asks for sine after removing one full lap. Find sin 390°.

Show the steps and the answer
30°390°same terminal side
One extra lap leaves sine unchanged.
  1. 390°−360°=30°.Sine repeats every 360°.
  2. sin390°=sin30°=12.The special-angle sine is 12.
Answer
sin390°=12.
Double-check The terminal point is exactly the same as at 30°.

Rung 2 of 5

Use the shorter period

The question asks for tangent after removing half-lap periods. Find tan 1140°.

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
After reduction, the ratio is sine 60° divided by cosine 60°.
  1. 1140°−6×180°=1140°−1080°=60°.Tangent repeats every 180°.
  2. tan1140°=tan60°=3.The ratio at 60° is (32) ÷ 12 = 3.
Answer
tan1140°=3.
Double-check Removing three full laps, 1080°, also reaches 60°, so the coordinate-ratio result agrees.

Rung 3 of 5

Reduce a fractional radian angle

The question asks for sine after removing whole laps in radians. Find sin 37π6.

Show the steps and the answer
30°1110°same terminal side
1110° is 37π6, three full turns beyond 30°.
  1. Three full laps are 6π=36π6.Sine's period is 2π, so three periods equal 6π.
  2. 37π6−36π6=π6.The denominator 6 means the pieces match.
  3. sin37π6=sinπ6=12.π6 is the 30° special angle.
Answer
sin37π6=12.
Double-check The difference 6π is three full turns, so the terminal point agrees.

Rung 4 of 5

Move a negative angle forward

The question asks for sine after adding full laps to a negative input. Find sin(−47π6).

Show the steps and the answer
30°-1410°same terminal side
−1410° is −47π6, four full turns before 30°.
  1. Four sine periods are 4×2π=8π=48π6.Sine's period is 2π, and sixths give a common denominator.
  2. −47π6+48π6=π6.Adding four full laps preserves the stopping point and its sine output.
  3. sin(−47π6)=sinπ6=12.The reduced angle is the 30° special angle, whose height is 12.
Answer
sin(−47π6)=12.
Double-check The two angles differ by 8π, exactly four full laps. Both finish at the unit-circle point (32, 12).

Rung 5 of 5

Same-angle reciprocal cancellation

The question asks for a product whose two angles must first be matched. Find 7 cos π3 sec 37π3.

Show the steps and the answer

cosπ3=12

sec 37π3 = sec π3 = 2

7×12×2=7

  1. 37π3−6(2π)=37π3−36π3=π3.Secant's period is 2π, and six periods remove 12π.
  2. 7cosπ3secπ3=7(12)(2)=7.Cosine and secant are reciprocal at this defined angle.
  3. The denominator cosπ3=12 is nonzero.This confirms that reciprocal multiplication is allowed.
Answer
7.
Double-check Direct values give 7 × 12 × 2 = 7.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Sine has period π because sin 0 = sin π = 0.
A period must preserve every output. At π2, adding π changes sine from 1 to −1.
✓ Instead: Sine's period is 2π. One matching pair of values is insufficient.
✗ Not this: 60° and 240° are coterminal because their tangent values are equal.
The angles differ by half a turn and end on opposite sides. Equal function outputs do not require equal terminal points.
✓ Instead: They share a tangent value because tangent has period 180°. Coterminal angles differ by whole turns.

Tips and tricks

  • Know the pattern: ratios repeat after half a lap; coordinates and their reciprocals repeat after a full lap.
  • When reducing, remove a whole-number multiple of the requested function's period. Keep radians and degrees separate.

7 The trap

Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −12, not sin 30° = 12. Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).

Keep in mind

  • Drop only whole periods: removing 180° from cosine flips its sign, so cos 240° = −cos 60° = −12, not 12.
  • To count laps, divide by 360 and keep only the whole-number part, never rounding up: 1070 ÷ 360 ≈ 2.97, so remove 2 laps, 720°, leaving 350°.
  • Periodic means the whole pattern repeats, not one lucky match: sin 30° and sin 150° are both 12, yet 120° is not a period of sine, since sin 90° = 1 but sin 210° = −12.

Memory hook

Tangent is in a hurry: tan and cot repeat every half lap (180°, π); sin, cos, sec and csc need the full lap (360°, 2π).

Flash cards

Say the answer out loud, then flip.

What is a period?
The smallest positive step after which every output repeats.
What are coterminal angles?
Angles whose turns stop in the same place, on the same terminal side. They differ by whole laps (360° or 2π) and share all six values.
Period of sec t? Period of cot t?
  • sec t: 2π (360°).
  • cot t: π (180°).
sin 1470° = ?
12: 1470° − 4 × 360° = 30°, and sin 30° = 12.
tan 585° = ?
1: 585° − 3 × 180° = 45°, and tan 45° = 1.
Can you write cos 200° = cos 20° by removing 180°?
No. 180° is half of cosine's period: cos 200° = −cos 20°.

Lesson 5 of 10

Signs of the six functions in the four quadrants

Subject: MathematicsLeans on: Signs of a quotientLeans on: Reciprocal signsLeans on: Axis valuesOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of a town map with the center of town at the origin, the point (0, 0). East is positive x, west is negative x, north is positive y, and south is negative y. The axes divide the map into four regions called quadrants. Their names are I, II, III and IV, starting at the upper right and going counterclockwise. On the unit circle, sine reads your north or south position and cosine reads your east or west position. You can decide their signs without finding their sizes. The other four functions divide or flip those coordinates, so the sign rules for fractions finish the job.

Explain it like I am five

Picture a building's side view: a hallway crossing an elevator shaft. Steps right of the shaft are positive, steps left negative; floors above the hallway positive, basement floors negative. The hallway and shaft are the x-axis and y-axis; they split the picture into four quadrants, numbered I, II, III, IV counterclockwise from the upper right. A coordinate is a signed position: its size says how far, its sign says which side.

On the unit circle sin t is the y-coordinate and cos t the x-coordinate, so sine carries the up-down sign and cosine the right-left sign.

Example: the point (−0.96, 0.28) is left and up, in Quadrant II. sin t = 0.28, positive. cos t = −0.96, negative. tan t = yx = 0.28−0.96, about −0.29, since positive divided by negative is negative. Each flip, 1 over its partner, keeps the partner's sign: csc t = 1sint, about 3.57, is positive, while sec t = 1cost and cot t = 1tant are negative. Only sine and cosecant are positive: the S of All Students Take Calculus.

2 Picture it

QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
The signs of the six trig functions in each quadrant.
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
The same picture again: The signs of the six trig functions in each quadrant.
input Quadrantoutput sin t = yI+II+III−IV−
Quadrant: I, II, III, IV; sin t = y: +, +, −, −.
input Quadrantoutput cos t = xI+II−III−IV+
Quadrant: I, II, III, IV; cos t = x: +, −, −, +.
input Quadrantoutput tan t = y/xI+II−III+IV−
Quadrant: I, II, III, IV; tan t = y/x: +, −, +, −.
input Quadrantoutput cot t = x/yI+II−III+IV−
Quadrant: I, II, III, IV; cot t = x/y: +, −, +, −.
input Quadrantoutput sec t = 1/xI+II−III−IV+
Quadrant: I, II, III, IV; sec t = 1/x: +, −, −, +.
input Quadrantoutput csc t = 1/yI+II+III−IV−
Quadrant: I, II, III, IV; csc t = 1/y: +, +, −, −.

Reminder

Reminder: Signs of a quotient, Reciprocal signs, Axis values
  • Signs of a quotient. Matching signs give a positive quotient: −4−3 = 43. Different signs give a negative quotient: 4−3 = −43.
  • Reciprocal signs. A reciprocal keeps the sign of a nonzero number: 1 ÷ (−4) = −14.
  • Axis values. At (0, 1), cosine is 0, sine is 1, tangent is undefined and cotangent is 0. A 0 on the bottom, rather than on top, causes undefined.

3 Why

Quadrant numbering is a convention chosen to follow the direction positive angles turn. Keeping that convention lets everyone read the same sign table. The signs follow from definitions, rather than from the quadrant names: sin t = y and cos t = x. A reciprocal keeps its nonzero partner's sign because 1 is positive. Thus csc follows sin and sec follows cos. A quotient of two nonzero coordinates is positive when their signs match and negative when they differ. Therefore tan = yx and cot = xy are positive in I and III, and negative in II and IV.

4 The rule

Inside a quadrant: I has all six positive.

II has sin and csc positive. III has tan and cot positive. IV has cos and sec positive. Each unlisted function is negative. Axis points need their actual coordinates, because a value may be 0 or undefined.

The same idea, five ways

Say it

Sine follows y, cosine follows x, their reciprocals keep the signs, and tangent and cotangent compare the two signs.

Write it

The signs of the six trigonometric functions come from the signs of the terminal point's two coordinates.

In math
  • sin t = y
  • cos t = x
  • tant=yx
  • cot t = xy
  • sec t = 1x
  • csc t = 1y
Like

A town map tells you east or west and north or south before it tells you a distance.

See it
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
The same picture a third time: The signs of the six trig functions in each quadrant.

The same idea, other ways

As a map

Put your finger in the lower left of a town map. Both east or west position x and north or south position y are negative. That immediately gives negative cosine and sine. The matching signs make tangent and cotangent positive.

x = cos θy = sin θx < 0, y < 0
The lower left has two negative coordinates.
As arithmetic

The signs of −4−3 and −3−4 are positive because the two negatives cancel. The signs of 1−3 and 1−4 are negative. The same four calculations explain tangent, cotangent, secant and cosecant in Quadrant III.

−4−3>0

−3−4>0

1−3<0

1−4<0

As a memory device

Say All Students Take Calculus while moving counterclockwise through I, II, III, IV. All six are positive in I. The next words name the positive pair: sine with cosecant, tangent with cotangent, cosine with secant. Rebuild the signs from x and y if the phrase slips your mind.

QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
The same picture, shown 4 times now: The signs of the six trig functions in each quadrant.
Working backward

A location question reverses the sign table. If cosine is positive, the point is on the right. If cosecant is negative, sine is negative, so the point is below. Right and below together identify Quadrant IV. Each condition removes locations until only a shared location remains.

x = cos θy = sin θright and below
Positive cosine and negative cosecant put the point in the lower right.
Quadrantsin t = ycos t = xtant=yxcot t = xysec t = 1xcsc t = 1y
I++++++
II+−−−−+
III−−++−−
IV−+−−+−

Part 1: Sine

Sine uses the terminal point's coordinates. Read its height, like a floor number above or below street level.

  • sin t = y
  • I and II: positive. III and IV: negative.
  • Inside a quadrant, x and y are both nonzero, so this function is defined.
x = cos θy = sin θsin t = y
The point sin t = y on the unit circle at 150°.

Worked example

Reading the sign of sine

θ is in Quadrant II. What is the sign of sin θ? The question asks for the output's sign.

Show the steps and the answer
x = cos θy = sin θsin t = y
The same picture again: The point sin t = y on the unit circle at 150°.
  1. The point is above the x-axis, so y > 0. Since sinθ=y, sine is positive.Sine reads height rather than horizontal position.
Answer
sin θ > 0
Double-check A point above the horizontal axis has positive height. A point such as the one shown supplies a direct coordinate check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Decide the sign from the function's name alone.
The name says which coordinates to use; the coordinates' signs determine the answer.
✓ Instead: Use sin t = y and check the relevant coordinate signs.
Tips and tricks
  • Point to the relevant coordinate in the picture before writing a sign.

Part 2: Cosine

Cosine uses the terminal point's coordinates. Read its left or right position, like east or west of town.

  • cos t = x
  • I and IV: positive. II and III: negative.
  • Inside a quadrant, x and y are both nonzero, so this function is defined.
x = cos θy = sin θcos t = x
The point cos t = x on the unit circle at 315°.

Worked example

Reading the sign of cosine

θ is in Quadrant IV. What is the sign of cos θ? The question asks for the output's sign.

Show the steps and the answer
x = cos θy = sin θcos t = x
The same picture again: The point cos t = x on the unit circle at 315°.
  1. The point is right of the y-axis, so x > 0. Since cosθ=x, cosine is positive.Cosine reads horizontal position.
Answer
cos θ > 0
Double-check A point right of the vertical axis has positive x. A point such as the one shown supplies a direct coordinate check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Decide the sign from the function's name alone.
The name says which coordinates to use; the coordinates' signs determine the answer.
✓ Instead: Use cos t = x and check the relevant coordinate signs.
Tips and tricks
  • Point to the relevant coordinate in the picture before writing a sign.

Part 3: Tangent

Tangent uses the terminal point's coordinates. Compare two directions by dividing. Matching directions give a positive ratio; opposite directions give a negative ratio.

  • tant=yx
  • I and III: positive. II and IV: negative.
  • Inside a quadrant, x and y are both nonzero, so this function is defined.
x = cos θy = sin θtan t = y/x
The point tan t = y/x on the unit circle at 225°.

Worked example

Reading the sign of tangent

θ is in Quadrant III. What is the sign of tan θ? The question asks for the output's sign.

Show the steps and the answer
x = cos θy = sin θtan t = y/x
The same picture again: The point tan t = y/x on the unit circle at 225°.
  1. Here x < 0 and y < 0. Their quotient yx is positive.Two matching negative signs give a positive quotient.
Answer
tan θ > 0
Double-check The ratio of the two negative legs is positive. A point such as the one shown supplies a direct coordinate check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Decide the sign from the function's name alone.
The name says which coordinates to use; the coordinates' signs determine the answer.
✓ Instead: Use tan t = yx and check the relevant coordinate signs.
Tips and tricks
  • Point to the relevant coordinate in the picture before writing a sign.

Part 4: Cotangent

Cotangent uses the terminal point's coordinates. Compare two directions by dividing. Matching directions give a positive ratio; opposite directions give a negative ratio.

  • cot t = xy
  • I and III: positive. II and IV: negative.
  • Inside a quadrant, x and y are both nonzero, so this function is defined.
x = cos θy = sin θcot t = x/y
The point cot t = x/y on the unit circle at 135°.

Worked example

Reading the sign of cotangent

θ is in Quadrant II. What is the sign of cot θ? The question asks for the output's sign.

Show the steps and the answer
x = cos θy = sin θcot t = x/y
The same picture again: The point cot t = x/y on the unit circle at 135°.
  1. Here x < 0 and y > 0. Their quotient xy is negative.Different signs give a negative quotient.
Answer
cot θ < 0
Double-check The x and y legs have different signs. A point such as the one shown supplies a direct coordinate check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Decide the sign from the function's name alone.
The name says which coordinates to use; the coordinates' signs determine the answer.
✓ Instead: Use cot t = xy and check the relevant coordinate signs.
Tips and tricks
  • Point to the relevant coordinate in the picture before writing a sign.

Part 5: Secant

Secant uses the terminal point's coordinates. Flip one coordinate. A positive coordinate stays positive after flipping and a negative coordinate stays negative.

  • sec t = 1x
  • I and IV: positive. II and III: negative.
  • Inside a quadrant, x and y are both nonzero, so this function is defined.
x = cos θy = sin θsec t = 1/x
The point sec t = 1/x on the unit circle at 240°.

Worked example

Reading the sign of secant

θ is in Quadrant III. What is the sign of sec θ? The question asks for the output's sign.

Show the steps and the answer
x = cos θy = sin θsec t = 1/x
The same picture again: The point sec t = 1/x on the unit circle at 240°.
  1. Here x < 0, so 1x is negative.Positive 1 divided by a negative number is negative.
Answer
sec θ < 0
Double-check Secant has the sign of the negative x-coordinate. A point such as the one shown supplies a direct coordinate check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Decide the sign from the function's name alone.
The name says which coordinates to use; the coordinates' signs determine the answer.
✓ Instead: Use sec t = 1x and check the relevant coordinate signs.
Tips and tricks
  • Point to the relevant coordinate in the picture before writing a sign.

Part 6: Cosecant

Cosecant uses the terminal point's coordinates. Flip one coordinate. A positive coordinate stays positive after flipping and a negative coordinate stays negative.

  • csc t = 1y
  • I and II: positive. III and IV: negative.
  • Inside a quadrant, x and y are both nonzero, so this function is defined.
x = cos θy = sin θcsc t = 1/y
The point csc t = 1/y on the unit circle at 300°.

Worked example

Reading the sign of cosecant

θ is in Quadrant IV. What is the sign of csc θ? The question asks for the output's sign.

Show the steps and the answer
x = cos θy = sin θcsc t = 1/y
The same picture again: The point csc t = 1/y on the unit circle at 300°.
  1. Here y < 0, so 1y is negative.Positive 1 divided by a negative number is negative.
Answer
csc θ < 0
Double-check Cosecant has the sign of the negative y-coordinate. A point such as the one shown supplies a direct coordinate check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Decide the sign from the function's name alone.
The name says which coordinates to use; the coordinates' signs determine the answer.
✓ Instead: Use csc t = 1y and check the relevant coordinate signs.
Tips and tricks
  • Point to the relevant coordinate in the picture before writing a sign.

5 How

  1. 1. If the question gives a quadrant, locate that region in the picture and write its x and y signs: I (+, +), II (−, +), III (−, −), IV (+, −).
  2. 2. Use sin t = y and cos t = x. A positive sign means an output greater than 0; a negative sign means an output less than 0.
  3. 3. Give csc the sign of sin, and sec the sign of cos. A reciprocal of a nonzero number keeps that number's sign.
  4. 4. Give tan and cot a positive sign when the x and y signs match, and a negative sign when they differ.
  5. 5. If the question gives signs and asks for location, list every quadrant and axis allowed by each condition, then keep their shared locations. For example, cosine positive allows I, IV and the positive x-axis; sine positive allows I, II and the positive y-axis. Do not drop an axis candidate until another condition excludes it.
  6. 6. If a condition says a value is 0 or undefined, check the four axis points before using the quadrant rows. For example, cos t = 0 means x = 0, so the point lies on the y-axis.
  7. 7. Memory device: All Students Take Calculus. In quadrant order, All, Sine, Tangent and Cosine are positive, each named function together with its reciprocal. This cue applies inside quadrants.
  8. Read a reference-table entry in the column under its input or category in the matching picture.

Finding signs or recovering a location

1
Is a quadrant given?
YesRead its x and y signs, then use coordinate, quotient and reciprocal definitions.
NoCheck whether an angle or function conditions are given.
↓
2
Are function conditions given?
YesList every quadrant and axis each condition permits, then keep only shared locations.
NoLocate the angle first using quarter-turn boundaries.
↓
3
Does a condition say 0 or undefined?
YesCheck the axis points, including which coordinate is zero.
NoUse positive and negative signs in the quadrant table.
  1. Read whether the given information is a quadrant, an angle or a list of signs.
  2. For a known quadrant, fill in x and y and then build the six signs.
  3. For an angle, locate its terminal side using the next lesson, then use the appropriate quadrant row.
  4. For signs, list all quadrant and axis candidates for each condition and keep only shared locations. If the given conditions force both coordinates nonzero, axes are excluded before using quadrant-only lists.
  5. For a zero or an undefined value, use the axis points and check any remaining condition.

6 Worked example

Worked example

Finding where a terminal point lies from two sign conditions

The terminal point (x, y) of an angle t lies on the unit circle. For each part, find every quadrant or axis direction where the point can lie. (a) csc t > 0 and cot t < 0. (b) sec t < 0 and tan t ≥ 0.

Show the steps and the answer
  1. (a) Rewrite the first condition. csct=1y, so csc t > 0 means y > 0. That is the same as sin t > 0.csc is the reciprocal of sin, and a reciprocal of a nonzero number keeps that number's sign. csc t is defined only when y ≠ 0.
  2. List the locations where y > 0: quadrant I, quadrant II and the positive y-axis.Sine is positive above the x-axis. The positive y-axis has y = 1 > 0, so it stays a candidate for now.
  3. Rewrite the second condition. cott=xy<0. This requires y≠0, and x and y must have different signs. That allows quadrant II (−,+) and quadrant IV (+,−).A quotient is negative when its two signs differ. Cot is undefined on the x-axis, where y = 0.
  4. Test the axis candidate. At the positive y-axis, (0, 1), cott=01=0. Zero is not negative, so cot t < 0 excludes this point.An axis candidate is dropped only when one of the conditions rules it out. Here the actual coordinates do that.
  5. Keep the shared locations. {I, II, positive y-axis} and {II, IV} have only quadrant II in common.The point must satisfy both conditions at once.
  6. (b) Rewrite sect=1x<0 as x < 0, which is cos t < 0. List the locations: quadrant II, quadrant III and the negative x-axis.sec has the sign of cos. Cosine is negative to the left of the y-axis. The negative x-axis has x = −1, so it is a candidate.
  7. Rewrite tant=yx≥0. This allows matching signs, which is quadrants I and III. It also allows tant=0, which happens when y=0 and x≠0. That adds the positive x-axis and the negative x-axis.The condition includes 0. Step 6 says to check the axis points whenever a value may be 0. On the y-axis, x = 0, so tan t is undefined there.
  8. Keep the shared locations. {II, III, negative x-axis} and {I, III, positive x-axis, negative x-axis} have quadrant III and the negative x-axis in common.At (−1, 0): sec t = −1 < 0 and tan t = 0 ≥ 0. Both conditions hold, so this axis direction stays in the answer.
Answer
(a) Quadrant II only. (b) Quadrant III or the negative x-axis.
Double-check (a) Take t = 150°, where (x, y) = (−32, 12). Then csc t = 2 > 0 and cot t = −3 < 0. Both conditions hold. (b) Take t = 225°, where (x, y) = (−22, −22). Then sec t = −2 < 0 and tan t = 1 ≥ 0. Also take t = 180°, where (x, y) = (−1, 0). Then sec t = −1 < 0 and tan t = 0 ≥ 0. All Students Take Calculus agrees inside the quadrants: only sin and csc are positive in II, and only tan and cot are positive in III.

Work to write

  1. csc t > 0 ⇒ y > 0: I, II, positive y-axis
  2. cot t < 0: II, IV (cot = 0 on the positive y-axis, so that axis is excluded)
  3. (a) Quadrant II
  4. sec t < 0 ⇒ x < 0: II, III, negative x-axis
  5. tan t ≥ 0: I, III, positive x-axis, negative x-axis
  6. (b) Quadrant III or the negative x-axis

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 6

Signs in a named quadrant

θ is inside Quadrant I. Give all six signs. The question asks which side of 0 each output lies on.

Show the steps and the answer
x = cos θy = sin θI
Every expression is built from positive coordinates.
  1. x > 0 and y > 0.Quadrant I is right of the y-axis and above the x-axis.
  2. sin and cos are positive, and their reciprocals csc and sec are positive.Sine reads y, cosine reads x, and reciprocals keep nonzero signs.
  3. tan and cot are positive.Each divides one positive coordinate by the other.
Answer
All six functions are positive.
Double-check Both coordinates are positive, so no quotient or reciprocal introduces a negative sign.

Rung 2 of 6

Intersect two coordinate signs

An angle inside a quadrant has sin θ < 0 and cos θ < 0. Find its quadrant. The outputs give two location clues.

Show the steps and the answer
x = cos θy = sin θx < 0, y < 0
Left and below identify III.
  1. Both sine and cosine are strictly negative, so both coordinates are nonzero. Axis points cannot meet the combined conditions.Every axis point has one zero coordinate.
  2. sinθ<0 means y < 0, so the candidates are III and IV.Sine is height.
  3. cosθ<0 means x < 0, so the candidates are II and III.Cosine is horizontal position.
  4. The shared candidate is III.III appears in both lists.
Answer
Quadrant III.
Double-check III has both coordinates negative, so it satisfies both conditions.

Rung 3 of 6

Translate reciprocal signs

sec θ > 0 and csc θ < 0. Find the quadrant. First translate the flipped values into coordinate signs.

Show the steps and the answer
x = cos θy = sin θright and below
The two reciprocal conditions select IV.
  1. Both secant and cosecant have defined nonzero values, so their coordinate denominators x and y are nonzero. This excludes all axis points.An axis would make one of these reciprocal functions undefined.
  2. secθ>0 gives cosθ>0 and x > 0, so the candidates are I and IV.A reciprocal keeps its nonzero partner's sign.
  3. cscθ<0 gives sinθ<0 and y < 0, so the candidates are III and IV.The same reciprocal sign rule applies to cosecant.
  4. Only IV appears in both lists.The terminal point must be right and below at once.
Answer
Quadrant IV.
Double-check In IV, x > 0 makes sec positive and y < 0 makes csc negative.

Rung 4 of 6

Recognize incomplete information

tan θ < 0 and cot θ < 0. Is one quadrant determined? The question asks whether these clues narrow the location to one choice.

Show the steps and the answer
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
The same picture, shown 5 times now: The signs of the six trig functions in each quadrant.
  1. tanθ<0 allows II or IV.Its coordinate signs must differ.
  2. cotθ<0 also allows II or IV.Reversing top and bottom keeps the quotient's sign when both are nonzero.
  3. Both clues still leave II and IV.These conditions repeat the same sign information rather than removing another candidate.
Answer
Quadrant II or Quadrant IV. One quadrant is not determined.
Double-check In II, x < 0 and y > 0 give two negative quotients. In IV, x > 0 and y < 0 also give two negative quotients.

Rung 5 of 6

Distinguish an axis from a quadrant

cos θ = 0 and sin θ > 0. Locate the terminal point. One output is zero, so inspect axes.

Show the steps and the answer
x = cos θy = sin θ(0, 1)
A zero coordinate puts the point on a boundary.
  1. cosθ=0 means x=0, so the point is on the y-axis.Cosine is the x-coordinate.
  2. The unit-circle points with x=0 are (0, 1) and (0,−1).The circle has radius 1.
  3. sinθ>0 means y > 0, so choose (0, 1).Only the upper axis point has positive height.
Answer
The positive y-axis, at (0, 1). It is in no quadrant.
Double-check At (0, 1), cosine is 0 and sine is 1, which meets both conditions.

Rung 6 of 6

Reject contradictory clues

An angle has sin θ > 0, cos θ > 0 and tan θ < 0. Can it exist? The question asks whether all three conditions can hold together.

Show the steps and the answer
x = cos θy = sin θx > 0, y > 0
Two positive coordinates force positive tangent.
  1. sinθ>0 and cosθ>0 put the point in I.Positive height and positive horizontal position mean upper right.
  2. In I, tanθ=yx is positive.A positive divided by a positive is positive.
  3. That contradicts tanθ<0.One angle cannot have both a positive and a negative tangent value.
Answer
No angle satisfies all three conditions.
Double-check The quotient definition rules out the negative tangent directly, even before looking at the memory phrase.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Tangent is negative in Quadrant III because y is negative.
Tangent divides y by x. In III both are negative, so looking only at y loses the second sign.
✓ Instead: tan t > 0 in III, because negativenegative is positive.
✗ Not this: The word Sine in All Students Take Calculus means only sine is positive in II.
The memory device names a function together with its reciprocal. The reciprocal has the same sign.
✓ Instead: Both sin t and csc t are positive in II; the other four are negative.
✗ Not this: An angle on an axis belongs to the neighboring quadrant.
An axis is the boundary between quadrants. One coordinate is 0 there, so the table's strictly positive or negative signs do not apply.
✓ Instead: Use the actual axis point and the six formulas to decide 0, nonzero or undefined.

Tips and tricks

  • Write the x and y signs first. That line can earn useful partial credit and gives you a check on every later sign.
  • For a location from two signs, write two candidate lists and circle only the locations appearing in both.
  • All Students Take Calculus names positive functions, not negative ones.

7 The trap

A reciprocal keeps its partner's sign. csc follows sin, sec follows cos, and cot follows tan wherever both exist. Remember that the All Students Take Calculus cue excludes axis points.

Keep in mind

  • The sign of an angle and the sign of its sine are different things: 200° is a positive angle, but sin 200° < 0 because its point is below the x-axis.
  • Two sign clues narrow the location: list the quadrants each allows and keep the overlap, so cos t > 0 (I, IV) with cot t < 0 (II, IV) gives Quadrant IV.
  • On an axis one coordinate is 0, so the quadrant table does not apply: at the top point (0, 1), cos t = 0 is neither positive nor negative.
  • A flip keeps the sign: sin t = −0.3 gives csc t = 1−0.3 ≈ −3.33.

Memory hook

All Students Take Calculus: counterclockwise from Quadrant I, the positive ones are All, Sine, Tangent, Cosine, each with its flip (csc, cot, sec).

Flash cards

Say the answer out loud, then flip.

What is a quadrant?
One of the four regions the axes cut the plane into, numbered I to IV counterclockwise from the upper right.
Signs of (x, y) in Quadrant IV?
(+, −): right and down.
In which quadrants is tan t positive, and why?
I and III: x and y have the same sign there, so yx > 0.
t = 160°. Signs of sin t, cos t and tan t?
  • Quadrant II.
  • sin t: +
  • cost:−
  • tant:−
cos t < 0 and cot t < 0. Which quadrant?
II: cos t < 0 allows II and III, and cot t < 0 allows II and IV.
In Quadrant II, is csc t negative because All Students Take Calculus names only Sine there?
No: each named function brings its flip, so sin t and csc t are both positive in II.

Lesson 6 of 10

Which quadrant is the angle in?

Subject: MathematicsLeans on: Common denominatorsLeans on: Multiplication by a positive numberLeans on: Open and closed endpointsOpen this lesson
Leans on 0Comes back in 0

1 In plain words

To locate an angle, picture an address around a circular track. The four corners of the trip are a quarter, a half, three quarters and one whole turn. Each stretch between corners is a quadrant. If your address includes extra laps, remove the laps first. If you traveled backward, add laps until the address is between 0 and one whole turn. An angle with a degree sign uses 90°, 180°, 270° and 360° as its corners. A number without that sign uses radians, with corners π2, π, 3π2 and 2π. Decimal estimates help you compare ordinary numbers with those exact corners.

Explain it like I am five

Picture a pizza cut into four equal slices by two straight cuts. Every angle starts on the cut pointing right, at 3 o'clock. A positive angle turns counterclockwise, the same way the slices are numbered I, II, III, IV; a negative angle turns clockwise. The sign sets only the direction, and the number says how far.

Example: where does −500° end? Clockwise 500° is more than one full lap of 360°. Add whole laps until the angle is at least 0° and less than 360°: −500° + 360° = −140°, still negative, and −140° + 360° = 220°. Adding a lap never moves where the turn stops, the terminal side (terminal means end, like a bus terminal), so −500° and 220° are coterminal: they stop in the same place.

Now compare with the slice edges 90°, 180° and 270°: 220° is between 180° and 270°, so −500° ends in Quadrant III. An angle landing exactly on 0°, 90°, 180° or 270° sits on a cut, in no quadrant.

2 Picture it

input Quadrantoutput Exact radian intervalI0 < t < π/2IIπ/2 < t < πIIIπ < t < 3π/2IV3π/2 < t < 2π↓ evaluate: input given, read the output below it
A table of 4 values of Exact radian interval, for Quadrant from I to IV.
input Quadrantoutput Exact radian intervalI0 < t < π/2IIπ/2 < t < πIIIπ < t < 3π/2IV3π/2 < t < 2π↓ evaluate: input given, read the output below it
The same picture again: A table of 4 values of Exact radian interval, for Quadrant from I to IV.
input Quadrantoutput Exact radiansI0 < t < π/2IIπ/2 < t < πIIIπ < t < 3π/2IV3π/2 < t < 2π
A table of 4 values of Exact radians, for Quadrant from I to IV.
input Quadrantoutput Approximate boundary landmarksI0 and about 1.57IIabout 1.57 and about 3.14IIIabout 3.14 and about 4.71IVabout 4.71 and about 6.28
A table of 4 values of Approximate boundary landmarks, for Quadrant from I to IV.
input Quadrantoutput Exact degreesI0° < θ < 90°II90° < θ < 180°III180° < θ < 270°IV270° < θ < 360°
A table of 4 values of Exact degrees, for Quadrant from I to IV.

Reminder

Reminder: Common denominators, Multiplication by a positive number, Open and closed endpoints
  • Common denominators. To subtract full turns from a fraction of π, match the bottom: 11π4 − 2π = 11π4 − 8π4 = 3π4.
  • Multiplication by a positive number. Multiplying by positive π keeps order: 0.5 < 0.75 < 1 becomes π2 < 3π4 < π.
  • Open and closed endpoints. [0, 2π) includes 0 and excludes 2π. Thus 2π reduces to 0, while π2 stays on its axis.

3 Why

A full circle is 2π radians or 360°, so one quarter is π2 radians or 90°. The four quadrants are the open stretches between consecutive axis directions. Adding or subtracting a full turn returns to the same terminal side, so it preserves the location. Multiplying or dividing by positive π preserves numerical order; this lets you compare coefficients in an angle such as 7π4. Decimal landmarks approximate the exact boundaries. They are safe for numbers well away from a boundary, but a nearby number needs more precision or an exact comparison.

4 The rule

I: 0<t<π2.

II: π2<t<π. III: π<t<3π2. IV: 3π2<t<2π. Reduce to 0≤t<2π, or 0°≤θ<360°. A multiple of π2 or 90° lies on an axis, not in a quadrant.

The same idea, five ways

Say it

Find the ending side inside the first full turn, then compare it with the four axis directions.

Write it

An angle is in a quadrant when its terminal side lies strictly between that quadrant's two axes.

In math
  • 0 ≤ t < 2π
  • 0° ≤ θ < 360°
  • I:0<t<π2
  • II: π2 < t < π
  • III: π < t < 3π2
  • IV: 3π2 < t < 2π
  • Quadrant I inputs: (0, π2).
  • Quadrant II inputs: (π2, π).
  • Quadrant III inputs: (π, 3π2).
  • Quadrant IV inputs: (3π2, 2π).
  • Quadrant II inputs: {t | π2 < t < π}.
Like

An address on a circular track gives the stopping place after completed laps are removed.

See it
input Quadrantoutput Exact radian intervalI0 < t < π/2IIπ/2 < t < πIIIπ < t < 3π/2IV3π/2 < t < 2π↓ evaluate: input given, read the output below it
The same picture a third time: A table of 4 values of Exact radian interval, for Quadrant from I to IV.

The same idea, other ways

As a circular address

Ignore how many complete laps a runner took. Mark only the stopping position in the current lap. The first quarter is I, then II, III and IV. The four corner positions are axes and belong to no quadrant.

800°terminal sideinitial side
Two complete laps leave 80°, in the first quarter.
As four slots on a line

Cut the interval from 0 to 2π at π2, π and 3π2. Every input inside one of the four slots names a quadrant. An input on a cut names an axis. This picture makes the strict inequality signs matter.

input Quadrantoutput Exact radian intervalI0 < t < π/2IIπ/2 < t < πIIIπ < t < 3π/2IV3π/2 < t < 2π↓ evaluate: input given, read the output below it
The same picture, shown 4 times now: A table of 4 values of Exact radian interval, for Quadrant from I to IV.
As coefficients of π

For 7π4, divide the whole comparison by positive π. You only need to place 74 = 1.75 between 0, 0.5, 1, 1.5 and 2. It falls in the last slot, so the original angle is in IV.

7π4=1.75π

1.5 < 1.75 < 2

3π2<7π4<2π

QuadrantExact radiansApproximate boundary landmarksExact degrees
I0<t<π20 and about 1.570° < θ < 90°
IIπ2<t<πabout 1.57 and about 3.1490° < θ < 180°
IIIπ<t<3π2about 3.14 and about 4.71180° < θ < 270°
IV3π2<t<2πabout 4.71 and about 6.28270° < θ < 360°

Part 1: Quadrant I

This is the upper right stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.

  • 0<t<π2
  • An endpoint lies on an axis, not inside this quadrant.
x = cos θy = sin θQuadrant I
The point Quadrant I on the unit circle at 36°.

Worked example

An angle inside Quadrant I

Locate t = π5. The question asks which region contains its terminal side.

Show the steps and the answer
x = cos θy = sin θQuadrant I
The same picture again: The point Quadrant I on the unit circle at 36°.
  1. Compare in tenths: 0<15=210<510=12.Fractions with a common positive bottom can be compared by their tops.
  2. Multiplying the comparison by positive π puts t inside Quadrant I.The strict boundary comparison matches 0 < t < π2.
Answer
Quadrant I
Double-check The picture places this angle in the upper right, matching the exact comparison.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Include an axis endpoint in the quadrant.
The endpoint is a boundary direction, where one coordinate is 0.
✓ Instead: Use strict inequalities for angles inside the quadrant.
Tips and tricks
  • Write both bounding landmarks when naming this quadrant.

Part 2: Quadrant II

This is the upper left stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.

  • π2<t<π
  • An endpoint lies on an axis, not inside this quadrant.
x = cos θy = sin θQuadrant II
The point Quadrant II on the unit circle at 112.5°.

Worked example

An angle inside Quadrant II

Locate t = 5π8. The question asks which region contains its terminal side.

Show the steps and the answer
x = cos θy = sin θQuadrant II
The same picture again: The point Quadrant II on the unit circle at 112.5°.
  1. Compare the coefficients: 12=48<58<88=1.Fractions with a common positive bottom can be compared by their tops.
  2. Multiplying the comparison by positive π puts t inside Quadrant II.The strict boundary comparison matches π2 < t < π.
Answer
Quadrant II
Double-check The picture places this angle in the upper left, matching the exact comparison.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Include an axis endpoint in the quadrant.
The endpoint is a boundary direction, where one coordinate is 0.
✓ Instead: Use strict inequalities for angles inside the quadrant.
Tips and tricks
  • Write both bounding landmarks when naming this quadrant.

Part 3: Quadrant III

This is the lower left stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.

  • π<t<3π2
  • An endpoint lies on an axis, not inside this quadrant.
x = cos θy = sin θQuadrant III
The point Quadrant III on the unit circle at 247.5°.

Worked example

An angle inside Quadrant III

Locate t = 11π8. The question asks which region contains its terminal side.

Show the steps and the answer
x = cos θy = sin θQuadrant III
The same picture again: The point Quadrant III on the unit circle at 247.5°.
  1. Compare the coefficients: 1=88<118<128=32.Fractions with a common positive bottom can be compared by their tops.
  2. Multiplying the comparison by positive π puts t inside Quadrant III.The strict boundary comparison matches π < t < 3π2.
Answer
Quadrant III
Double-check The picture places this angle in the lower left, matching the exact comparison.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Include an axis endpoint in the quadrant.
The endpoint is a boundary direction, where one coordinate is 0.
✓ Instead: Use strict inequalities for angles inside the quadrant.
Tips and tricks
  • Write both bounding landmarks when naming this quadrant.

Part 4: Quadrant IV

This is the lower right stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.

  • 3π2<t<2π
  • An endpoint lies on an axis, not inside this quadrant.
x = cos θy = sin θQuadrant IV
The point Quadrant IV on the unit circle at 337.5°.

Worked example

An angle inside Quadrant IV

Locate t = 15π8. The question asks which region contains its terminal side.

Show the steps and the answer
x = cos θy = sin θQuadrant IV
The same picture again: The point Quadrant IV on the unit circle at 337.5°.
  1. Compare the coefficients: 32=128<158<168=2.Fractions with a common positive bottom can be compared by their tops.
  2. Multiplying the comparison by positive π puts t inside Quadrant IV.The strict boundary comparison matches 3π2 < t < 2π.
Answer
Quadrant IV
Double-check The picture places this angle in the lower right, matching the exact comparison.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Include an axis endpoint in the quadrant.
The endpoint is a boundary direction, where one coordinate is 0.
✓ Instead: Use strict inequalities for angles inside the quadrant.
Tips and tricks
  • Write both bounding landmarks when naming this quadrant.

5 How

  1. 1. Read the unit. A degree sign means degrees; without a degree sign the input is in radians.
  2. 2. If the angle is negative, add 360° or 2π until it is at least 0. If it is at least one full turn, subtract full turns until it is less than 360° or 2π. The final window includes 0 and excludes a full turn.
  3. 3. For degrees, compare with the exact boundaries 0°, 90°, 180°, 270°, 360°.
  4. 4. For a multiple of π, compare its coefficient with 0, 12, 1, 32, 2. This works because π is positive.
  5. 5. For a plain radian number, use π2 ≈ 1.5708, π ≈ 3.1416, 3π2 ≈ 4.7124, 2π ≈ 6.2832. Each decimal is rounded to four places. Keep enough precision to decide which side of the exact boundary the number is on.
  6. 6. Use the exact interval in the column under the chosen quadrant. If the angle equals a boundary, name the axis direction instead: 0 gives positive x, π2 positive y, π negative x, 3π2 negative y.
  7. Read a reference-table entry in the column under its input or category in the matching picture.

Locating an angle without changing its ending side

1
Does the input have a degree sign?
YesUse laps of 360° and boundaries 0°, 90°, 180°, 270°, 360°.
NoUse laps of 2π and radian boundaries.
↓
2
Is the input below 0?
YesAdd full turns until it is at least 0.
NoCheck whether it is at least one full turn.
↓
3
Is the input at least one full turn?
YesSubtract full turns until it is less than one full turn.
NoThe input is already in the chosen window.
↓
4
Does the result equal an axis boundary?
YesName the axis direction; it belongs to no quadrant.
NoFind the strict interval containing it.
  1. Identify degrees or radians.
  2. Add full turns to a negative angle and subtract full turns from an angle at least one full turn.
  3. Stop in the window that includes 0 and excludes the full turn.
  4. Choose exact degree landmarks, coefficients of π or sufficiently precise decimal landmarks.
  5. Check equality with an axis before naming a quadrant.

6 Worked example

Worked example

Place four angles: degrees, a multiple of π, a plain radian and an axis case

In which quadrant does each angle lie? If an angle lies on an axis, name the axis direction. (a) −480° (b) 23π4 (c) t = −4 (d) 630°

Show the steps and the answer
240°-480°same terminal side
The angles −480° and 240° share the same terminal side, which lies in Quadrant III.
  1. Read the units. (a) and (d) have a degree sign, so they are in degrees. (b) and (c) have no degree sign, so they are in radians.A degree sign means degrees. Without one, the input is in radians.
  2. (a) −480° is negative, so add 360°: −480°+360°=−120°. That is still negative, so add 360° again: −120°+360°=240°.Add full turns until the angle is in the window 0° ≤ θ < 360°.
  3. (a) Compare with the boundaries: 180°<240°<270°. So −480° is in Quadrant III.Quadrant III is 180° < θ < 270°.
  4. (b) The coefficient of π is 234=5.75, which is at least 2. Subtract 2 twice, which takes off 4π: 234−4=74. The angle reduces to 7π4.Subtract full turns of 2π until the angle is in 0 ≤ t < 2π.
  5. (b) Compare the coefficient: 32=1.5<74=1.75<2. So 3π2<7π4<2π, and 23π4 is in Quadrant IV.For a multiple of π, comparing coefficients with 0, 12, 1, 32 and 2 works because π is positive.
  6. (c) t=−4 is negative, so add 2π≈6.2832: −4+2π≈2.2832.Add one full turn so the angle is in 0 ≤ t < 2π.
  7. (c) Compare with the decimal boundaries: 1.5708 < 2.2832 < 3.1416. The number is about 0.7 away from each boundary, so four decimal places are more than enough. The angle −4 is in Quadrant II.Quadrant II is π2 < t < π, with π2 ≈ 1.5708 and π ≈ 3.1416.
  8. (d) 630° is at least 360°, so subtract a full turn: 630°−360°=270°.Subtract full turns until the angle is less than 360°.
  9. (d) 270° equals a boundary. It is a multiple of 90°, so it lies on an axis and not in a quadrant. 270° corresponds to 3π2, the negative y-axis.An angle equal to a boundary is named by its axis direction: 3π2 or 270° gives the negative y-axis.
Answer
(a) −480° is in Quadrant III. (b) 23π4 is in Quadrant IV. (c) t = −4 is in Quadrant II. (d) 630° lies on the negative y-axis, not in a quadrant.
Double-check Undo each reduction. 240° − 720° = −480°. 7π4 + 4π = 23π4. 2.2832 − 6.2832 = −4. 270° + 360° = 630°. As a sign check for (c): cos(−4) ≈ −0.6536 < 0 and sin(−4) ≈ 0.7568 > 0. A negative x-value with a positive y-value matches Quadrant II.

Work to write

  1. (a) −480° + 360° + 360° = 240°; 180° < 240° < 270° → Quadrant III
  2. (b) 23π4 − 4π = 7π4; 32 < 74 < 2 → Quadrant IV
  3. (c) −4 + 2π ≈ 2.2832; 1.5708 < 2.2832 < 3.1416 → Quadrant II
  4. (d) 630° − 360° = 270° → on the negative y-axis (not in a quadrant)

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Degrees already in one turn

Locate θ = 26°. The question asks which region contains the ending side.

Show the steps and the answer
x = cos θy = sin θ26°
The first quarter holds 26°.
  1. 0°<26°<90°.The angle lies after the starting direction but before the first quarter turn.
  2. Therefore the terminal side lies in I.That strict interval defines I.
Answer
Quadrant I.
Double-check The ray lies in the upper right.

Rung 2 of 7

A plain radian number

Locate t = 2.4. There is no degree sign, so compare a radian input with the radian landmarks.

Show the steps and the answer
x = cos θy = sin θt = 2.4
The point lies in the second quarter.
  1. π2≈1.5708 and π≈3.1416.These are the two neighboring exact axis boundaries, rounded to four places.
  2. 1.5708 < 2.4 < 3.1416, so π2<2.4<π.2.4 lies well away from either rounded boundary.
  3. Therefore the angle lies in II.II is between π2 and π.
Answer
Quadrant II.
Double-check Its radian input lies in the upper left quarter of one turn.

Rung 3 of 7

Compare fractions of π

Locate t = 13π8. Compare exact fractions rather than rounded decimals.

Show the steps and the answer
x = cos θy = sin θ13π/8
Thirteen eighths of π lies in the last quarter.
  1. 3π2=12π8 and 2π=16π8.Giving the boundaries the same bottom makes their sizes directly comparable.
  2. 12π8<13π8<16π8.12 < 13 < 16, and π8 is positive.
  3. Thus 3π2<t<2π.These are the bounds of IV.
Answer
Quadrant IV.
Double-check 13π8 is 292.5°, which lies between 270° and 360°.

Rung 4 of 7

Several backward turns

Locate θ = −410°. Add laps to find its stopping direction in the first turn.

Show the steps and the answer
310°-410°same terminal side
Both rotations end in the lower right.
  1. −410°+360°=−50°, still negative.One added lap is not enough to enter [0°, 360°).
  2. −50°+360°=310°.A second added lap preserves the terminal side and enters the chosen window.
  3. 270°<310°<360°, so the angle is in IV.The fourth quarter lies between these exact boundaries.
Answer
Quadrant IV.
Double-check −410° and 310° differ by 720°, which is exactly two complete turns.

Rung 5 of 7

Which quadrant is t = −9 in?

In which quadrant does each angle lie? If an angle lies on an axis, name the axis direction. (a) t = −9 (b) t = 13 (c) t = 7π2

Show the steps and the answer
P
The unit circle with the terminal point P of t = −9.
  1. Read the units. None of the three angles has a degree sign, so all three are in radians. Parts (a) and (b) are plain radian numbers. Part (c) is a multiple of π.Without a degree sign the input is in radians.
  2. (a) −9 is negative, so add 2π≈6.2832: −9+6.2832=−2.7168. That is still negative, so add 2π again: −2.7168+6.2832=3.5664. Exactly, the angle is 4π−9≈3.5664, and 0≤3.5664<6.2832.Adding full turns gives a coterminal angle. Keep adding until the angle is at least 0 and less than 2π.
  3. (a) Compare 3.5664 with the boundaries. π≈3.1416<3.5664<4.7124≈3π2. Check exactly: 4π−9>π because 3π≈9.4248>9. Also 4π−9<3π2 because 5π2≈7.854<9.A plain radian number is compared with decimal approximations of the exact boundaries. The gaps of about 0.42 and 1.15 are far larger than any rounding error.
  4. (a) The angle lies in π<t<3π2, so it is in Quadrant III.The interval π < t < 3π2 is the column under Quadrant III.
  5. (b) 13 is at least one full turn. Subtract 2π: 13−6.2832=6.7168. That is still at least 2π, so subtract again: 6.7168−6.2832=0.4336. Exactly, the angle is 13−4π≈0.4336.Subtract full turns until the angle is less than 2π.
  6. (b) Compare: 0<0.4336<1.5708≈π2. So t=13 is in Quadrant I.The interval 0 < t < π2 is Quadrant I.
  7. (c) 7π2 has coefficient 72=3.5. This is at least 2, so subtract one full turn: 72−2=32. The reduced angle is 3π2.For a multiple of π, work with the coefficient. Subtracting 2 from the coefficient removes one full turn.
  8. (c) The coefficient 32 equals a boundary exactly. So 7π2 lies on an axis, in the negative y direction.A multiple of π2 lies on an axis, and 3π2 points along the negative y-axis.
Answer
(a) Quadrant III (b) Quadrant I (c) on the axis, in the negative y direction
Double-check Use a calculator in radian mode. (a) sin(−9) ≈ −0.412 and cos(−9) ≈ −0.911. Both are negative, which matches Quadrant III. (b) sin 13 ≈ 0.420 and cos 13 ≈ 0.907. Both are positive, which matches Quadrant I. (c) cos(7π2) = 0 and sin(7π2) = −1, so the point is (0, −1) on the negative y-axis.

Work to write

  1. (a)−9+2(2π)=4π−9≈3.5664
  2. π ≈ 3.1416 < 3.5664 < 4.7124 ≈ 3π2, so Quadrant III
  3. (b)13−2(2π)=13−4π≈0.4336
  4. 0 < 0.4336 < 1.5708 ≈ π2, so Quadrant I
  5. (c) 7π2 − 2π = 3π2, so on the axis in the negative y direction

Rung 6 of 7

A negative fraction requiring several laps

Locate t = −23π4. Find a coterminal input in [0, 2π).

Show the steps and the answer
x = cos θy = sin θπ/4
Removing the backward laps leaves the first quadrant.
  1. Each lap is 2π=8π4. Add three laps, 6π=24π4.Two laps add only 16π4 and would leave a negative remainder.
  2. −23π4+24π4=π4.The bottoms match, so combine the tops.
  3. 0<π4<π2, so the angle is in I.A quarter of π is less than half of π.
Answer
Quadrant I.
Double-check Three added laps are exactly 6π, so the original and reduced inputs have the same terminal side.

Rung 7 of 7

A remainder exactly on a boundary

Locate θ = 810°. The question allows an axis answer, so check equality before selecting a quadrant.

Show the steps and the answer
x = cos θy = sin θ(0, 1)
The endpoint is on the axis between I and II.
  1. 810°−2(360°)=810°−720°=90°.Two full turns leave a remainder in [0°, 360°).
  2. 90° is exactly the first quarter turn.It equals a boundary rather than lying inside a quadrant.
  3. The terminal point is (0, 1), on the positive y-axis.A quarter turn from (1, 0) reaches the top of the circle.
Answer
The positive y-axis. It is in no quadrant.
Double-check 810° differs from 90° by two complete turns, so both stop at the top.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Keep subtracting laps until the remainder is positive.
The chosen window includes 0. A full turn reduces to 0, which is a valid axis direction.
✓ Instead: Stop when 0 ≤ t < 2π, or 0° ≤ θ < 360°.
✗ Not this: 1.57 < t < 3.14 is the exact definition of Quadrant II.
The true boundaries are about 1.570796 and 3.141593. The two decimal values are rounded and may misclassify an input close to an axis.
✓ Instead: Use π2 < t < π exactly, and decimal estimates only with enough precision.
✗ Not this: A full turn has a different quadrant from 0 because its input is larger.
The terminal side returns to positive x after a full turn.
✓ Instead: Both are on the positive x-axis; neither is in a quadrant.

Tips and tricks

  • Write the exact reduction first, such as 9 − 2π, then give a rounded decimal with ≈.
  • For an angle written with π, compare the coefficient with 0.5, 1 and 1.5 before reaching for a calculator.
  • If the remainder is 0 or an exact quarter turn, name an axis and stop using strict quadrant rows.

7 The trap

A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly π2. A number close to a rounded landmark needs more digits before you choose a quadrant.

Keep in mind

  • A plain number means radians, not degrees: t = 6 is about 343.8°, in Quadrant IV, while 6° is in Quadrant I.
  • Every angle starts pointing right, and counterclockwise describes the turn, not the start: 120° starts at 3 o'clock and swings up and over to the upper left.
  • The sign sets only the direction: 130° turns counterclockwise into Quadrant II, while −130° turns clockwise into Quadrant III, the same place as 230°.
  • Near a landmark, keep more digits: t = 3 is in Quadrant II, because 3 < π ≈ 3.1416.

Memory hook

Shrink to 0° ≤ θ < 360° by adding or removing 360°, then find the landmarks around it: 0°, 90°, 180°, 270°, 360° (0, 1.57, 3.14, 4.71, 6.28 radians, rounded).

Flash cards

Say the answer out loud, then flip.

What is standard position?
  • Vertex (the corner point) at (0, 0), starting side along the positive x-axis (pointing right)
  • positive angles turn counterclockwise.
What is the terminal side of an angle?
The side where the turn stops, like a clock hand's final position. Terminal means end, as in a bus terminal.
Which quadrant holds 1500°?
I:1500°−4×360°=60°.
Which quadrant holds t = 11π6?
IV: 116 ≈ 1.83 is between 1.5 and 2, so 3π2 < 11π6 < 2π.
Is a negative angle always in Quadrant III or IV?
No: −330° + 360° = 30°, so −330° ends in Quadrant I.

Lesson 7 of 10

Increasing and decreasing: where sine and cosine rise and fall

Subject: MathematicsLeans on: Ordering negative numbersLeans on: A common shift preserves orderLeans on: Periodicity preserves outputsLeans on: Input labelsOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of climbing a staircase. As you move forward, your height rises. A function is increasing on a stretch when every larger input gives a larger output there. Walking downhill gives the opposite pattern, called decreasing. These words describe change, rather than whether a value is positive or negative. On a circular track, follow the point as its angle grows from 0 to 2π. Sine reads its height, and cosine reads its left or right position. Watch each position separately. Sine rises, falls, falls, then rises in the four quarters. Cosine falls, falls, rises, then rises. The question is how the output moves as you increase the input.

Explain it like I am five

Picture riding a Ferris wheel that starts at 3 o'clock and turns counterclockwise. Your height is sine and your left-right position is cosine. Increasing means that as the angle grows, the value goes up; decreasing means it goes down.

Follow one lap. From 3 o'clock to 12 (0° to 90°) you rise and drift left: sine increases, cosine decreases. From 12 to 9 (90° to 180°) you fall and keep drifting left: both decrease. From 9 to 6 you fall but drift right: sine decreases, cosine increases. From 6 back to 3 you rise and drift right: both increase.

Example: which is larger, cos 105° or cos 165°? Both angles are in Quadrant II (90° to 180°), where cosine decreases, so the larger angle gives the smaller value: cos 105° > cos 165°, read 'cos 105° is greater than cos 165°'. A calculator in degree mode agrees: cos 105° is about −0.259 and cos 165° about −0.966, and a negative number closer to 0 is larger.

2 Picture it

π/2π3π/22π−11π/2π3π/22π−11
y = sin x, solid, beside y = cos x, dashed.
π/2π3π/22π−11
The same picture again: y = sin x, solid, beside y = cos x, dashed.
input t goes fromoutput P moves0 → π/2 (I)(1, 0) → (0, 1)π/2 → π (II)(0, 1) → (−1, 0)π → 3π/2 (III)(−1, 0) → (0, −1)3π/2 → 2π (IV)(0, −1) → (1, 0)
A table of 4 values of P moves, for t goes from from 0 → π2 (I) to 3π2 → 2π (IV).
input t goes fromoutput cos t0 → π/2 (I)1 → 0π/2 → π (II)0 → −1π → 3π/2 (III)−1 → 03π/2 → 2π (IV)0 → 1
A table of 4 values of cos t, for t goes from from 0 → π2 (I) to 3π2 → 2π (IV).
input t goes fromoutput sin t0 → π/2 (I)0 → 1π/2 → π (II)1 → 0π → 3π/2 (III)0 → −13π/2 → 2π (IV)−1 → 0
A table of 4 values of sin t, for t goes from from 0 → π2 (I) to 3π2 → 2π (IV).
input t goes fromoutput Result0 → π/2 (I)sin increasing, cos decreasingπ/2 → π (II)sin decreasing, cos decreasingπ → 3π/2 (III)sin decreasing, cos increasing3π/2 → 2π (IV)sin increasing, cos increasing
A table of 4 values of Result, for t goes from from 0 → π2 (I) to 3π2 → 2π (IV).

Reminder

Reminder: Ordering negative numbers, A common shift preserves order, Periodicity preserves outputs, Input labels
  • Ordering negative numbers. A negative number nearer 0 is larger: −14 > −34. Picture −14 farther right on a number line.
  • A common shift preserves order. Subtracting the same number keeps order: 410° < 440° becomes 50° < 80° after subtracting 360° from both.
  • Periodicity preserves outputs. sin 380° = sin 20° because their inputs differ by 360°. Larger original inputs can therefore have equal outputs.
  • Input labels. x1 and x2 mean two different input numbers. For trigonometric functions, we usually call the input t and reserve x for the circle's horizontal coordinate.

3 Why

Follow each quarter of the circle. From (1, 0) to (0, 1), the point climbs and moves left, so sine increases and cosine decreases. From (0, 1) to (−1, 0), it drops and moves left, so both decrease. From (−1, 0) to (0, −1), it drops but moves right, so sine decreases and cosine increases. From (0, −1) to (1, 0), it climbs and moves right, so both increase. Because height and horizontal position move in those directions throughout each quarter, any two input angles in that quarter give the indicated output order.

4 The rule

On a chosen interval, increasing means x2>x1 gives f(x2)>f(x1); decreasing means x2>x1 gives f(x2)<f(x1).

On [0,2π], sin increases on [0,π2] and [3π2,2π], and decreases on [π2,3π2]. cos decreases on [0,π] and increases on [π,2π].

The same idea, five ways

Say it

Increasing means a larger input always gives a larger output on the stated stretch. Decreasing means it gives a smaller output.

Write it

Sine and cosine change direction during a full turn, so their increasing and decreasing behavior must be stated on intervals.

In math
  • x2 > x1 and increasing: f(x2) > f(x1)
  • x2 > x1 and decreasing: f(x2) < f(x1)
  • sin: rises in I and IV, falls in II and III
  • cos: falls in I and II, rises in III and IV
Like

Moving forward along an uphill or downhill path compares successive heights.

See it
π/2π3π/22π−11
The same picture a third time: y = sin x, solid, beside y = cos x, dashed.

The same idea, other ways

As a staircase

Increasing says that forward steps raise the output; decreasing says they lower it. A staircase can climb while it is still below street level. That is why an increasing output can be negative.

(1, −3)(2, −2)246−4−22
The output rises from −3 to −2 although both outputs are negative.
As a moving point

Trace the track counterclockwise. In III the point goes down and right. Down means decreasing sine, but right means increasing cosine. The same input change has different effects on the two outputs.

x = cos θy = sin θdown and right through III
Height decreases while horizontal position increases.
As output order

Compare two inputs, not one value in isolation. If 20° < 70° and cosine decreases throughout the stretch containing them, the output order reverses: cos 20° > cos 70°. For an increasing function the input and output orders agree.

20° < 70°

cos decreases in I

cos 20° > cos 70°

t goes fromP movescos tsin tResult
0→π2(I)(1, 0) → (0, 1)1 → 00 → 1sin increasing, cos decreasing
π2 → π (II)(0,1)→(−1,0)0→−11 → 0sin decreasing, cos decreasing
π → 3π2 (III)(−1,0)→(0,−1)−1→00→−1sin decreasing, cos increasing
3π2 → 2π (IV)(0,−1)→(1,0)0 → 1−1→0sin increasing, cos increasing

Part 1: Sine: follow height

Sine is the moving point's height, like a rider's height on a Ferris wheel. Its graph places input t horizontally and sine vertically. The point can still be below the center while climbing.

  • Increasing from 0 to π2, then again from 3π2 to 2π.
  • Decreasing from π2 to 3π2.
  • Quadrant pattern: increasing, decreasing, decreasing, increasing.
π/2π3π/22π−11
y = sin x.

Worked example

Two heights while climbing

Compare sin 15° and sin 55°. Which height is larger?

Show the steps and the answer
π/2π3π/22π−11
The same picture again: y = sin x.
  1. 0°<15°<55°<90°, so both inputs are in I.These are the first quarter's boundaries.
  2. Sine increases in I, so sin15°<sin55°.The point rises throughout this quarter.
Answer
sin 55° is larger.
Double-check The later point is higher on the circle.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Sine increases over the entire first half of a turn.
At π2 the point reaches the top and starts descending.
✓ Instead: Sine increases only up to π2, then decreases.
Tips and tricks
  • Trace height with your finger rather than horizontal position.

Part 2: Cosine: follow left or right

Cosine is the moving point's horizontal position, like an east or west address. Moving left makes that address smaller; moving right makes it larger, including when the address is still negative.

  • Decreasing from 0 to π.
  • Increasing from π to 2π.
  • Quadrant pattern: decreasing, decreasing, increasing, increasing.
π/2π3π/22π−11
y = cos x.

Worked example

Two horizontal positions

Compare cos 205° and cos 255°. Which horizontal coordinate is larger?

Show the steps and the answer
π/2π3π/22π−11
The same picture again: y = cos x.
  1. 180°<205°<255°<270°, so both inputs are in III.Both points lie in the lower left quarter.
  2. Cosine increases in III, so cos205°<cos255°.The point moves right from x = −1 toward x = 0.
Answer
cos 255° is larger.
Double-check Both values are negative, but the later point is farther right and closer to x = 0.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The point moves downward in III, so cosine decreases.
Downward describes y and therefore sine. Cosine reads x.
✓ Instead: Cosine increases in III because the point moves right.
Tips and tricks
  • For cosine, think left or right on the circle; on its function graph this becomes down or up.

Part 3: The notes' line y = 3x − 5

A line with rule y = 3x − 5 acts like a running total. Every extra unit of input adds 3 to the output. The subtraction of 5 lowers every total by the same amount and cannot change which total is larger.

  • y = 3x − 5 is increasing on (−∞, ∞).
  • If the input increases by a positive amount d, the output increases by 3d, which is positive.
(−1, −8)(2, 1)−224−8−44
The instructor's line y = 3x − 5 rises as x grows.

Worked example

Comparing sines of two angles beyond two full turns

Without a calculator, decide which is larger: sin(37π8) or sin(39π8).

Show the steps and the answer
112.5°832.5°same terminal side
The angle 37π8 = 832.5° ends at the same point as 5π8 = 112.5°, two full turns earlier, in quadrant II.
  1. Note that 39π8>37π8, so 39π8 is the larger input. We must decide whether its sine is the larger or the smaller output.A larger angle does not automatically give a larger sine. It depends on whether sine is increasing or decreasing where the angles lie.
  2. Subtract two full turns, 4π=32π8, from both angles: 37π8−32π8=5π8 and 39π8−32π8=7π8.Coterminal angles have the same sine. Both angles are shifted by the same number of turns, so their order is preserved: 7π8 > 5π8.
  3. Locate the reduced angles: π2=4π8<5π8<7π8<8π8=π. Both lie in quadrant II, inside [π2,3π2].A comparison by monotonicity needs both inputs in one interval where sine keeps the same direction of change.
  4. On [π2,3π2], sine is decreasing.This comes from the motion table. As the point moves from the top of the circle down the left side, its height falls.
  5. Since 7π8>5π8 and sine is decreasing there, sin(7π8)<sin(5π8).Decreasing means the larger input gives the smaller output.
  6. Return to the original angles: sin(39π8)=sin(7π8) and sin(37π8)=sin(5π8). So sin(37π8)>sin(39π8).Each original angle has the same sine as its coterminal reduced angle.
Answer
sin(37π8) is larger: sin(37π8) > sin(39π8).
Double-check Moving-point check: 5π8 = 112.5° sits just past the top of the circle, while 7π8 = 157.5° is much nearer the negative x-axis. The point at 112.5° is higher, so its sine is larger. Both sines are positive, so signs alone could not decide this, and monotonicity was needed. Approximate values agree: sin 112.5° ≈ 0.92 and sin 157.5° ≈ 0.38.

Work to write

  1. 37π8−4π=5π8,39π8−4π=7π8
  2. π2 < 5π8 < 7π8 < π, so both are in quadrant II
  3. sin decreases on [ π2, 3π2 ]
  4. 7π8>5π8⇒sin(7π8)<sin(5π8)
  5. sin(37π8)>sin(39π8)
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The −5 makes this line decreasing.
Subtracting a fixed amount from every output shifts all outputs equally.
✓ Instead: The positive multiplier 3 makes the output increase as the input increases.
Tips and tricks
  • Look at how an input change affects the output, rather than at whether the formula contains a minus sign.

Part 4: The notes' square function y = x2

Squaring tells you how large a square is when its side has a given distance from 0. On the negative side, moving right brings the input closer to 0 and makes its square smaller. On the positive side, moving right takes it farther from 0 and makes its square larger.

  • y = x2 is decreasing on (−∞, 0].
  • y = x2 is increasing on [0, ∞).
  • It has no single increasing or decreasing direction over all real inputs.
(0, 0)(−3, 9)(−1, 1)(1, 1)(3, 9)−222610
The notes' square function falls toward input 0 and rises away from 0.

Worked example

Comparing cos(23π9) and cos(25π9) after removing one full turn

Without a calculator, decide which is larger: cos(23π9) or cos(25π9).

Show the steps and the answer
100°460°same terminal side
The angle 23π9 = 460° ends on the same terminal side as 5π9 = 100°, one full turn (360°) less.
  1. Note what is compared: the cosine outputs of two inputs. The input 25π9 is larger than 23π9, but that alone does not tell us which cosine is larger.A larger input can give a larger or a smaller output, depending on whether cosine is increasing or decreasing there.
  2. Remove one full turn, 2π=18π9, from each angle: 23π9−18π9=5π9 and 25π9−18π9=7π9. So cos(23π9)=cos(5π9) and cos(25π9)=cos(7π9).Cosine repeats every full turn, so subtracting 2π does not change the value.
  3. Compare the reduced inputs: 7π9>5π9, so the order is preserved.Both angles were reduced by the same single full turn.
  4. Locate both reduced angles. They satisfy π2=4.5π9<5π9<7π9<9π9=π, so both lie in quadrant II, inside [0,π].The comparison by monotonicity requires both inputs to lie in one interval where cosine keeps the same direction of change.
  5. On [0,π] cosine decreases, so the larger input gives the smaller output: 7π9>5π9 gives cos(7π9)<cos(5π9).Decreasing means x2 > x1 gives f(x2) < f(x1).
  6. Return to the original angles: cos(23π9)=cos(5π9)>cos(7π9)=cos(25π9).The reduced values are equal to the original ones.
Answer
cos(23π9) is larger: cos(23π9) > cos(25π9).
Double-check Both values are negative because both reduced angles are in quadrant II. As the point moves from 5π9 (100°) to 7π9 (140°), it moves farther left on the unit circle, so the x-coordinate, which is the cosine, gets smaller. Approximate values agree: cos 100° ≈ −0.17 and cos 140° ≈ −0.77, and −0.17 > −0.77 because −0.17 is closer to 0.

Work to write

  1. cos(23π9)=cos(23π9−2π)=cos(5π9)
  2. cos(25π9)=cos(25π9−2π)=cos(7π9)
  3. π2 < 5π9 < 7π9 < π, and cos decreases on [0, π]
  4. 7π9>5π9⇒cos(7π9)<cos(5π9)
  5. cos(23π9)>cos(25π9)
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: All square outputs are positive, so the square function is increasing everywhere.
An output's sign does not tell you its direction of change. Also x = 0 gives output 0.
✓ Instead: The square function decreases on negative inputs and increases on positive inputs.
Tips and tricks
  • Always state the interval when saying the square function increases or decreases.

5 How

  1. 1. Read what to compare: a larger angle is the larger input, but its sine or cosine may be a larger or smaller output.
  2. 2. Locate both angles. For a comparison by increasing or decreasing, both must lie in one interval where the requested function keeps the same direction of change.
  3. 3. Use the quadrant motion table, or combine neighboring quarters with the same direction: cosine decreases through I and II and increases through III and IV.
  4. 4. Increasing means the larger input gives the larger output. Decreasing means the larger input gives the smaller output.
  5. 5. If both angles are shifted by the same complete turn, their order is preserved. If you reduce them by different numbers of turns, compare the reduced inputs again before using the table. Their original order need not be the reduced order.
  6. 6. If the two values have opposite signs, the positive value is larger. If neither one interval nor signs decide the comparison, these rules alone are insufficient; use an additional taught exact-value fact.
  7. 7. Check the moving point: higher means larger sine; farther right means larger cosine. For negative outputs, a value closer to 0 is larger, such as −14 > −34.
  8. Read a reference-table entry in the column under its input or category in the matching picture.

Comparing sine or cosine without decimal evaluation

1
Are the angles outside the first turn?
YesUse a common complete-turn shift if possible. If you reduce separately, compare the reduced order again.
NoUse the displayed inputs.
↓
2
Are both inputs in one interval where the function only increases or only decreases?
YesLarger input gives larger output for increasing, smaller output for decreasing.
NoCheck the signs of the two outputs.
↓
3
Does one output have a positive sign and the other a negative sign?
YesThe positive output is larger.
NoUse a taught exact value if available; the direction and sign rules alone may not settle the comparison.
  1. Locate both terminal sides and note the requested function.
  2. Check whether both inputs lie in one interval with a single direction of change.
  3. If so, compare the input order and apply increasing or decreasing.
  4. If reducing large inputs, use one common shift where possible. After different shifts, compare the reduced inputs anew.
  5. If the interval method does not apply, see whether opposite output signs decide the comparison.

6 Worked example

Worked example

Which value is larger?

Without a calculator, decide which is larger: (a) cos 20° or cos 70°; (b) sin 200° or sin 250°. The question compares two outputs; it does not require finding their decimal values.

Show the steps and the answer
π/2π3π/22π−11
The same picture, shown 4 times now: y = sin x, solid, beside y = cos x, dashed.
  1. (a) 0°<20°<70°<90°, so both inputs lie in I and 70° is larger.One quarter of the circle covers both angles.
  2. Cosine decreases in I, so cos20°>cos70°.As the angle grows, the point moves left and its x-coordinate gets smaller.
  3. (b) 180°<200°<250°<270°, so both inputs lie in III and 250° is larger.Both angles fit between the same two boundaries.
  4. Sine decreases in III, so sin200°>sin250°.As the angle grows, the point moves down toward (0, −1), making y smaller.
Answer
  • (a) cos 20° is larger.
  • (b) sin 200° is larger.
Double-check A second check in DEG mode gives cos 20° ≈ 0.940 and cos 70° ≈ 0.342; sin 200° ≈ −0.342 and sin 250° ≈ −0.940, rounded to three places. A negative number nearer 0 is larger: −0.342 > −0.940.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 8

A rising positive output

Which is larger, sin 12° or sin 38°? Compare heights in one quadrant.

Show the steps and the answer
x = cos θy = sin θrising in I
Height increases through I.
  1. 0°<12°<38°<90°.Both inputs lie in I.
  2. Sine increases in I, so sin12°<sin38°.A larger input moves the point higher.
Answer
sin 38° is larger.
Double-check The later point in I has greater height.

Rung 2 of 8

A falling positive output

Which is larger, cos 22° or cos 68°? Compare horizontal positions in one quadrant.

Show the steps and the answer
x = cos θy = sin θmoving left in I
Horizontal position decreases through I.
  1. 0°<22°<68°<90°.Both inputs lie in I.
  2. Cosine decreases in I, so cos22°>cos68°.The point moves left as the angle increases.
Answer
cos 22° is larger.
Double-check The earlier point is farther right.

Rung 3 of 8

Positive and decreasing

Which is larger, sin 115° or sin 165°? The signs match, so use direction of change.

Show the steps and the answer
x = cos θy = sin θfalling in II
Decreasing sine can remain positive.
  1. 90°<115°<165°<180°.Both inputs lie in II.
  2. Sine decreases in II, so sin115°>sin165°.The point descends from the top toward the x-axis.
Answer
sin 115° is larger.
Double-check Both heights are positive, but the later one is lower.

Rung 4 of 8

Negative and decreasing

Which is larger, sin 190° or sin 260°? Compare two negative heights.

Show the steps and the answer
x = cos θy = sin θlower height
A more negative height is smaller.
  1. 180°<190°<260°<270°.Both inputs lie in III.
  2. Sine decreases in III, so sin190°>sin260°.The later point has moved farther below the center.
Answer
sin 190° is larger.
Double-check The point at 190° is nearer the x-axis, so its negative height is closer to 0 and larger.

Rung 5 of 8

An increasing output in IV

Which is larger, cos 290° or cos 340°? Compare horizontal positions while returning to the starting point.

Show the steps and the answer
x = cos θy = sin θmoving right in IV
Horizontal position increases through IV.
  1. 270°<290°<340°<360°.Both inputs lie in IV.
  2. Cosine increases in IV, so cos290°<cos340°.The point moves right toward (1, 0).
Answer
cos 340° is larger.
Double-check The later point is closer to the far right of the circle.

Rung 6 of 8

Opposite signs settle a cross-quadrant comparison

Which is larger, sin 120° or sin 240°? These inputs occupy different quarters.

Show the steps and the answer
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
Compare above and below when signs differ.
  1. 120° lies in II, so sin120°>0.The point is above the x-axis.
  2. 240° lies in III, so sin240°<0.The point is below the x-axis.
  3. sin120°>sin240°.Every positive number is larger than every negative number.
Answer
sin 120° is larger.
Double-check The first height is above the center and the second height is below it.

Rung 7 of 8

Shift both inputs by the same lap

Which is larger, cos 410° or cos 440°? Move both inputs into one common quarter.

Show the steps and the answer
π/21
A common lap shift lets both inputs use the same decreasing quarter.
  1. 410°−360°=50° and 440°−360°=80°.Subtract the same full turn from both; periodicity preserves the cosine values and this common subtraction preserves order.
  2. 0°<50°<80°<90°, so cosine decreases across this whole stretch.Both reduced inputs are in I.
  3. cos50°>cos80°, so cos410°>cos440°.Use the decreasing order, then replace each reduced value by its equal original value.
Answer
cos 410° is larger.
Double-check A common shift leaves the original smaller input associated with the reduced smaller input.

Rung 8 of 8

A larger original input can give an equal output

Compare sin 20° and sin 380°. Does a larger input force a larger output over these different turns?

Show the steps and the answer
20°380°same terminal side
The two turns have different input sizes and the same sine output.
  1. 380°−360°=20°.The second angle is one complete turn beyond the first.
  2. sin380°=sin20°.Sine repeats every 360°.
  3. The outputs are equal even though 20°<380°.The increasing property applies on suitable intervals; sine is not increasing across all real inputs.
Answer
sin 20° = sin 380°.
Double-check Both terminal sides end at the same unit-circle point, so their heights match.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Sine is negative in IV, so it is decreasing there.
Its height rises from −1 toward 0. Rising describes change, even below 0.
✓ Instead: Sine is increasing and negative inside IV.
✗ Not this: Any larger angle has a larger sine.
Sine repeats and changes its direction of change. The increasing definition is used on a stated interval.
✓ Instead: Compare angles inside an interval where sine increases; in a decreasing interval the order reverses.
✗ Not this: Subtract complete turns from each angle independently and keep their original input order.
Different shifts may reverse the reduced order or make the reduced inputs equal. Periodicity preserves values, not the order between independently shifted inputs.
✓ Instead: After independent reductions, compare the new inputs again before using increasing or decreasing.

Tips and tricks

  • Write both angles in the same strict interval before writing an output inequality.
  • For cosine, remember left means smaller and right means larger. For sine, down means smaller and up means larger.
  • On a function graph, the horizontal axis gives the input angle t. It is different from the unit circle's coordinate x = cos t.

7 The trap

Decreasing does not mean negative. In II, sine decreases while staying positive. In IV, sine increases while staying negative. Also, reducing two angles by different numbers of turns can change their order, so compare their reduced inputs before using a direction rule.

Keep in mind

  • Decreasing is not the same as negative: in Quadrant I cosine falls from 1 to 0 but stays positive.
  • Among negative numbers the one closer to 0 is larger: −0.2 > −0.9.
  • Use the rule only when both angles sit in one quarter where the direction holds: 75° and 105° straddle the top, and in fact sin 75° = sin 105°.

Memory hook

Sine: up, down, down, up. Cosine: down, down, up, up. Chant it quarter by quarter as the Ferris wheel turns from 3 o'clock.

Flash cards

Say the answer out loud, then flip.

What does 'f is decreasing on an interval' mean?
A larger input gives a smaller output there: if t2 > t1, then f(t2) < f(t1).
On [0, 2π], where does sine increase?
On [0, π2 ] and on [ 3π2, 2π].
On [0, 2π], where does cosine increase?
On [π, 2π].
Which is larger, sin 25° or sin 55°?
sin 55°: both angles are in Quadrant I, where sine increases.
Which is larger, cos 290° or cos 340°?
cos 340°: both angles are in Quadrant IV, where cosine increases.
Cosine is positive in Quadrant I. Is it increasing there?
No. It falls from 1 to 0, so it is decreasing while positive.

Lesson 8 of 10

Even and odd: what a minus sign inside does

Subject: MathematicsLeans on: Negative of a negative numberLeans on: PeriodsLeans on: ReciprocalsOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Imagine walking around a circular track. You can walk the same distance forward or backward. The two stopping places sit directly above and below each other. Their left or right positions match, but their heights have opposite signs. A negative input −t means reversing the direction of the walk. A function is even when that reversal keeps its output the same. It is odd when the reversal changes the output to its negative. Cosine measures left or right position, so cosine is even. Sine measures height, so sine is odd. The four functions built by dividing or taking reciprocals follow from those two facts. In either definition, the comparison must hold for every allowed input.

Explain it like I am five

Picture a tree beside a still lake. Its reflection has the same left-right position but is upside down. On the unit circle a negative angle −t (read 'negative t') walks the same distance clockwise instead of counterclockwise, and it lands on the reflection of the point for t across the x-axis.

Example: say t ends at the point (0.28, 0.96). Then −t ends at (0.28, −0.96): same x, opposite y. Cosine reads x, so cos(−t) = 0.28 = cos t. Sine reads y, so sin(−t) = −0.96 = −sin t.

A function f is even when a minus sign inside disappears: f(−t) = f(t), read 'f of negative t equals f of t', like cosine. It is odd when the minus sign comes out front: f(−t) = −f(t), like sine. Secant is 1 divided by cosine, so it is even too. Tangent, cotangent and cosecant each hold exactly one sine, so each flips sign: they are odd.

2 Picture it

−π/3π/3−2π−ππ2π−11−π/3π/3−2π−ππ2π−11
y = cos x.
−π/3π/3−2π−ππ2π−11
The same picture again: y = cos x.
input Functionoutput f(−t) equalssin t−sin tcos tcos ttan t−tan tcot t−cot tsec tsec tcsc t−csc t
A table of 6 values of f(−t) equals, for Function from sin t to csc t.
input Functionoutput Reasonsin tP(−t) has the opposite heightcos tP(−t) has the same xtan t(sin(−t))/(cos(−t)) = (−sin t)/(cos t)cot t(cos(−t))/(sin(−t)) = (cos t)/(−sin t)sec t1/(cos(−t)) = 1/(cos t)csc t1/(sin(−t)) = 1/(−sin t)
A table of 6 values of Reason, for Function from sin t to csc t.
input Functionoutput Typesin toddcos teventan toddcot toddsec tevencsc todd
A table of 6 values of Type, for Function from sin t to csc t.

Reminder

Reminder: Negative of a negative number, Periods, Reciprocals
  • Negative of a negative number. An outside negative sign reverses the output: −(−12) = 12.
  • Periods. Remove whole 2π periods for sine, cosine, secant and cosecant. Tangent and cotangent allow whole π periods.
  • Reciprocals. Flipping a nonzero fraction keeps its sign: 1 ÷ (−13) = −3.

3 Why

If P(t) = (a, b), reflection across the x-axis gives P(−t) = (a, −b). Thus cos(−t) = a = cos t and sin(−t) = −b = −sin t. Dividing the opposite height by the unchanged horizontal coordinate reverses tangent's sign. Dividing the unchanged coordinate by the opposite height reverses cotangent's sign. Taking a reciprocal preserves cosine's equality and sine's sign reversal. Each statement applies where the function is defined; reflection preserves those allowed inputs.

4 The rule

An even or odd function has a domain that contains −t whenever it contains t.

For every t in that domain, even means f(−t)=f(t), and odd means f(−t)=−f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.

The same idea, five ways

Say it

An even function gives the same output for opposite inputs. An odd function gives opposite outputs for opposite inputs.

Write it

Reflecting an even function's graph across the y-axis keeps it unchanged; turning an odd function's graph half a turn about the origin keeps it unchanged.

In math
  • Even: f(−t) = f(t) for every input t in a domain symmetric about 0.
  • Odd: f(−t) = −f(t) for every input t in a domain symmetric about 0.
  • Even: cos t, sec t.
  • Odd: sin t, csc t, tan t, cot t.
Like

Walk the same distance forward and backward on a circular track. Compare the two stopping places.

See it
−π/3π/3−2π−ππ2π−11
Cosine has equal outputs at opposite inputs.

The same idea, other ways

As two walks

Walk t around the circle from the rightmost point. Then walk the same distance backward. You reach (a, b) and (a, −b). Matching horizontal positions explain cosine; opposite heights explain sine.

x = cos θy = sin θP(−t) = (a, −b)
Walking backward reflects the stopping point across the x-axis.
As graph symmetry

An even graph contains (t, f(t)) and (−t, f(t)). Folding along the y-axis matches those points. An odd graph contains (t, f(t)) and (−t, −f(t)). A half turn about the origin matches those points. These graph pictures follow from the definitions, rather than giving new sign rules.

(π/6, 1/2)(−π/6, −1/2)−2π−ππ2π−11
Sine's paired graph points have opposite input and output signs.
With the fraction definitions

Start with sin(−t) = −sin t and cos(−t) = cos t. Then tan(−t) = −sintcost = −tan t, while sec(−t) = 1cost = sec t. The same substitutions give odd cotangent and cosecant.

sin(−t)=−sint

cos(−t)=cost

tan(−t)=−tant

sec(−t) = sec t

Functionf(−t) equalsReasonType
sin t−sintP(−t) has the opposite heightodd
cos tcos tP(−t) has the same xeven
tan t−tantsin(−t)cos(−t)=−sintcostodd
cot t−cot tcos(−t)sin(−t)=cost−sintodd
sec tsec t1cos(−t)=1costeven
csc t−csc t1sin(−t)=1−sintodd

Part 1: Sine is odd

Sine reads the stopping point's height. Reversing the walk reflects that height across 0.

  • sin(−t)=−sint.
  • Sine is an odd function.
  • Its graph is symmetric about the origin.
−2π−ππ2π−11
Sine's graph matches itself after a half turn about the origin.

Worked example

Sine at a backward quarter turn

The angle is −90°. Find the sine, which is the stopping point's height.

Show the steps and the answer
x = cos θy = sin θ(0, −1)
The height is −1 after a clockwise quarter turn.
  1. sin(−90°)=−sin90°.Sine is odd.
  2. sin90°=1, so sin(−90°)=−1.The top of the unit circle has height 1.
Answer
−1
Double-check A clockwise quarter turn reaches (0, −1), whose height is −1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: sin(−t)=sint.
The reflected point has the opposite height, unless that height is 0.
✓ Instead: sin(−t)=−sint.
Tips and tricks
  • For sine, reverse the height's sign.

Part 2: Cosine is even

Cosine reads left or right position. Reversing the walk preserves that horizontal position.

  • cos(−t)=cost.
  • Cosine is an even function.
  • Its graph is symmetric about the y-axis.
−2π−ππ2π−11
Cosine reflects onto itself across the y-axis.

Worked example

Cosine at opposite sixth-turn inputs

The input is −π3. Find its cosine.

Show the steps and the answer
x = cos θy = sin θx = 1/2
The negative angle has the same x-coordinate as the positive angle.
  1. cos(−π3)=cosπ3.Cosine is even.
  2. cosπ3=12.The 60° special triangle gives x = 12 on the unit circle.
Answer
12
Double-check The two points have coordinates (12, 32) and (12, −32). Their x-coordinates match.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: cos(−π3)=−12.
The minus sign belongs to the input. Cosine is even, so its output does not reverse.
✓ Instead: cos(−π3)=12.
Tips and tricks
  • For cosine, preserve the horizontal position.

Part 3: Tangent is odd

Tangent divides height by horizontal position. Reversing only the height reverses the quotient.

  • tan(−t)=−sintcost=−tant.
  • Both sides require cos t ≠ 0.
−ππ−4−224
Tangent's paired values have opposite signs wherever both are defined.

Worked example

Tangent at a negative special angle

The input is −π6. Find its exact tangent.

Show the steps and the answer
x = cos θy = sin θtan t = y ÷ x
The quotient has a negative top and a positive bottom.
  1. tan(−π6)=−tanπ6.Tangent is odd.
  2. tanπ6=13=33, so the answer is −33.Opposite ÷ adjacent in the 30° triangle gives 13, and multiplying top and bottom by 3 rationalizes it.
Answer
−33
Double-check The original angle is in Quadrant IV. Its sine is negative and its cosine is positive, so the tangent must be negative.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: tan(−t) = tan t because tangent repeats.
Repeating by π and reflecting the input are different operations. At t = π4, reflection changes 1 to −1.
✓ Instead: tan(−t)=−tant;tan(t+π)=tant.
Tips and tricks
  • Keep odd symmetry separate from period.

Part 4: Cotangent is odd

Cotangent divides horizontal position by height. Reversing the height puts one negative sign on the bottom, which reverses the quotient.

  • cot(−t) = cost−sint = −cot t.
  • Both sides require sin t ≠ 0.
−ππ−4−224
Cotangent has opposite outputs at opposite allowed inputs.

Worked example

Cotangent at a negative eighth-turn input

The input is −π4. Find its cotangent.

Show the steps and the answer
x = cos θy = sin θcot t = x ÷ y
Equal leg sizes with different signs give cotangent −1.
  1. cot(−π4)=−cotπ4.Cotangent is odd.
  2. cotπ4=cosπ4÷sinπ4=1, so cot(−π4)=−1.The 45° special triangle has equal legs, so their quotient is 1.
Answer
−1
Double-check At −45°, the coordinates have equal magnitudes with x positive and y negative. The quotient x ÷ y is −1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A negative sign in the bottom disappears.
A positive divided by a negative is negative; there is only one sign reversal.
✓ Instead: a−b = −ab when b ≠ 0.
Tips and tricks
  • A negative sign on either side of a fraction gives the fraction one negative sign.

Part 5: Secant is even

Secant takes the reciprocal of horizontal position. Since that position stays unchanged, its reciprocal stays unchanged too.

  • sec(−t) = 1cos(−t) = 1cost = sec t.
  • Both sides require cos t ≠ 0.
−ππ−4−224
Secant is a mirror image across the y-axis.

Worked example

Secant at a negative angle beyond one turn

The input is −7π3. Find its secant.

Show the steps and the answer
60°420°same terminal side
The positive input reduces from 420° to 60°.
  1. sec(−7π3)=sec7π3.Secant is even.
  2. 7π3−2π=π3, so sec7π3=secπ3.Secant has period 2π.
  3. secπ3=1÷cosπ3=1÷12=2.Secant is the reciprocal of cosine.
Answer
2
Double-check 2 is in secant's range and is positive, as the original Quadrant IV angle requires.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: sec(−t) = −sec t.
Secant inherits cosine's even symmetry, rather than sine's odd symmetry.
✓ Instead: sec(−t) = sec t.
Tips and tricks
  • Remember cosine and secant as the even pair.

Part 6: Cosecant is odd

Cosecant takes the reciprocal of height. Reversing the height reverses the reciprocal's sign.

  • csc(−t) = 1−sint = −csc t.
  • Both sides require sin t ≠ 0.
−2π−ππ2π−4−224
Cosecant has origin symmetry wherever it is defined.

Worked example

Cosecant at a negative special angle

The input is −π6. Find its cosecant.

Show the steps and the answer
x = cos θy = sin θsin t = −1/2
Taking the reciprocal of the negative height gives negative cosecant.
  1. csc(−π6)=−cscπ6.Cosecant is odd.
  2. cscπ6=1÷12=2, so the answer is −2.Sine at π6 is 12, and cosecant is its reciprocal.
Answer
−2
Double-check At the original input, sin(−π6) = −12. Its reciprocal is −2 directly.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: csc(−t) = csc t.
The reciprocal keeps the sign of sine, so it reverses when sine reverses.
✓ Instead: csc(−t) = −csc t.
Tips and tricks
  • Cosecant follows sine, including its sign.

5 How

  1. 1. Read the negative sign inside the function as an instruction to reverse the input.
  2. 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
  3. 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
  4. 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
  5. 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.
  6. Read a reference-table entry in the column under its input or category in the matching picture.

Evaluate a function at a negative input

1
Is the function cosine or secant?
YesUse f(−t) = f(t). Keep the positive-input output, including any sign it already has.
NoFor sine, cosecant, tangent or cotangent, use f(−t) = −f(t). Keep the outside negative sign.
↓
2
Is the resulting positive angle one of the known exact angles?
YesRead its exact value, then apply the outside sign.
NoReduce by whole periods if possible. If it is still unfamiliar, give a sign or an equivalent expression rather than inventing an exact special value.
  1. Read the negative sign inside the function as an instruction to reverse the input.
  2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
  3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
  4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
  5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.

6 Worked example

Worked example

Using even and odd identities to evaluate functions of −5π6 and −17π6

The terminal point of t = 5π6 on the unit circle is P(−32, 12). Use the even and odd properties of the trigonometric functions to find the exact value of each expression.
(a) sin(−5π6)
(b) sec(−5π6)
(c) cot(−5π6)
(d) csc(−17π6)

Show the steps and the answer
x = cos θy = sin θP
Unit circle with the terminal point P(−32, 12) of t = 5π6 (150°).
  1. Read each minus sign inside the function as reversing the input. A reversed input moves the terminal point from P(−32,12) to its reflection across the x-axis, (−32,−12).Going around the unit circle clockwise instead of counterclockwise by the same amount reflects the point across the x-axis. The x-coordinate stays the same and the y-coordinate changes sign.
  2. Identify each function. Sine, cotangent and cosecant are odd. Secant is even.Cosine and secant are the only even functions among the six. Sine, cosecant, tangent and cotangent are odd.
  3. (a) Write sin(−5π6)=−sin(5π6). The y-coordinate of P gives sin(5π6)=12. So sin(−5π6)=−12.Sine is odd, so f(−t) = −f(t). The outside sign is written right away and kept.
  4. (b) Write sec(−5π6)=sec(5π6)=1cos(5π6). This is 1−32=−23=−233.Secant is even, so f(−t) = f(t) and no sign is added. Its value is the reciprocal of the x-coordinate of P. The denominator is then rationalized.
  5. (c) Write cot(−5π6)=−cot(5π6). From P, cot(5π6)=costsint=−3212=−3. So cot(−5π6)=−(−3)=3.Cotangent is odd, so the outside minus sign is written first. It is then kept while the inside value, which is itself negative, is evaluated.
  6. (d) Write csc(−17π6)=−csc(17π6). Since 17π6=2π+5π6 and cosecant has period 2π,csc(17π6)=csc(5π6)=112=2. So csc(−17π6)=−2.Cosecant is odd, so the outside sign comes first. Next the extra full period 2π is removed, which leaves the known input 5π6.
  7. Check the signs against the terminal points. −5π6 ends in Quadrant III at (−32,−12). Also, −17π6+4π=7π6, which is also in Quadrant III.In Quadrant III, sine, cosecant, cosine and secant are negative, and tangent and cotangent are positive. This matches −12, −233, 3 and −2.
Answer
(a) sin(−5π6) = −12 (b) sec(−5π6) = −233 (c) cot(−5π6) = 3 (d) csc(−17π6) = −2
Double-check Read the values straight from the reflected point (−32, −12) for −5π6. sin = −12. sec = 1−32 = −233. cot = −32−12 = 3. The angle −17π6 is coterminal with 7π6, whose point is (−32, −12), so csc = 1−12 = −2. All four values agree with the answers.

Work to write

  1. sin is odd: sin(−5π6) = −sin(5π6) = −12
  2. sec is even: sec(−5π6) = sec(5π6) = 1−32 = −233
  3. cot is odd: cot(−5π6) = −cot(5π6) = −(−3) = 3
  4. csc is odd: csc(−17π6) = −csc(17π6) = −csc(5π6) = −2, using period 2π
  5. Sign check: −5π6 and −17π6 both end in Quadrant III, where sin, csc and sec are negative and cot is positive

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 6

Evaluating cosine at a negative angle using evenness

Find the exact value of cos(−3π4) using the fact that cosine is an even function.

Show the steps and the answer
x = cos θy = sin θP
Unit circle with the terminal point P of −3π4 (the same position as 225°) at (−22, −22).
  1. Read cos(−3π4) as cosine evaluated at the input 3π4 reversed. The angle is measured 3π4 clockwise from the positive x-axis.A negative sign inside the function reverses the input. It turns the direction of rotation from counterclockwise to clockwise.
  2. Identify the function as cosine, which is even.Cosine and secant are the even trigonometric functions. Sine, cosecant, tangent and cotangent are odd.
  3. Replace cos(−3π4) by cos(3π4). No minus sign is placed outside.For an even function f(−t) = f(t), so reversing the input leaves the output unchanged.
  4. Evaluate cos(3π4). The angle 3π4 lies in Quadrant II with reference angle π4, and its terminal point is (−22,22). So cos(3π4)=−22. No period reduction is needed because 3π4 is already between 0 and 2π.Cosine is the x-coordinate of the terminal point. The known value at π4 is 22, and x is negative in Quadrant II.
  5. Check the sign against the original angle. −3π4 ends in Quadrant III at (−22,−22). Its x-coordinate is negative, which agrees with −22.The sign of the result must match the terminal point of the actual input. Evenness changed no sign, so the negative value comes from the quadrant alone.
Answer
cos(−3π4)=−22
Double-check Reflecting the point P for −3π4 at (−22, −22) across the x-axis gives (−22, 22), which is the point for 3π4. The x-coordinate is unchanged, as an even function requires. Both points have x = −22.

Work to write

  1. cosine is even, so cos(−t) = cos(t)
  2. cos(−3π4)=cos(3π4)
  3. 3π4 is in Quadrant II with reference angle π4, so cos(3π4) = −22
  4. cos(−3π4)=−22
  5. check: −3π4 ends in Quadrant III, where x < 0

Rung 2 of 6

An odd function

Find sin(−30°). In words, reverse the known sine output.

Show the steps and the answer
x = cos θy = sin θy = −1/2
The original angle has negative height.
  1. sin(−30°)=−sin30°.Sine is odd.
  2. −sin30°=−12.The known sine at 30° is 12.
Answer
−12
Double-check The angle is below the x-axis, so its sine is negative.

Rung 3 of 6

Cotangent of a reversed angle with extra periods

The terminal point of t = π3 on the unit circle is P(12, 32). Use the fact that cotangent is an odd function, together with its period π, to find the exact value of cot(−19π3). Rationalize the denominator.

Show the steps and the answer
x = cos θy = sin θP
Unit circle with the terminal point P(12, 32) of t = π3, which is used to evaluate cot(π3).
  1. Read cot(−19π3) as cotangent evaluated at the input 19π3 taken in the reverse (clockwise) direction.A negative sign inside the function reverses the input. The negative sign does not yet tell us the sign of the output.
  2. Identify the function as cotangent, which is odd.Sine, cosecant, tangent and cotangent are odd, so f(−t) = −f(t).
  3. Write cot(−19π3)=−cot(19π3).For an odd function the minus sign moves outside. We write it immediately so that it is not lost.
  4. Split the input: 19π3=18π3+π3=6π+π3.The remaining input still contains extra periods, and these must be removed before we use a known value.
  5. Reduce: cot(19π3)=cot(π3+6π)=cot(π3).Cotangent has period π, and 6π is six whole periods. Adding whole periods does not change the value.
  6. Evaluate cot(π3)=xy=1/23/2=13=33.Cotangent is the quotient x/y of the terminal point coordinates, and P(12, 32) is the given terminal point for π3. Multiplying the top and bottom by 3 rationalizes the denominator.
  7. Restore the outside sign: cot(−19π3)=−33.The minus sign from the odd property has to be kept through every later step.
Answer
cot(−19π3) = −33
Double-check −19π3 = −6π − π3, so the angle is coterminal with −π3. Its terminal point is the reflection of P across the x-axis, which is (12, −32) in Quadrant IV. In Quadrant IV, x > 0 and y < 0, so cotangent is negative. The direct quotient is x/y = 1/2−3/2 = −13 = −33. This matches the answer.

Work to write

  1. cot is odd, so cot(−19π3) = −cot(19π3)
  2. 19π3 = 6π + π3 and the period of cot is π, so cot(19π3) = cot(π3)
  3. cot(π3) = 1/23/2 = 33
  4. cot(−19π3) = −33

Rung 4 of 6

Even symmetry and a period

Find sec(−7π3). In words, reverse the input and remove a whole period.

Show the steps and the answer
60°420°same terminal side
The positive input has one extra full turn.
  1. sec(−7π3)=sec7π3.Secant is even.
  2. 7π3−6π3=π3.Secant's period is 2π = 6π3.
  3. secπ3=1÷12=2.Cosine at π3 is 12.
Answer
2
Double-check The original angle reduces by full turns to 5π3, in Quadrant IV, where secant is positive.

Rung 5 of 6

Odd symmetry over several periods

Find cot(−9π4). In words, preserve the outside sign while reducing the positive input.

Show the steps and the answer
x = cos θy = sin θcot t = −1
The equal coordinate sizes have opposite signs.
  1. cot(−9π4)=−cot9π4.Cotangent is odd.
  2. 9π4−2π=9π4−8π4=π4.Two cotangent periods, each π, preserve its value.
  3. −cotπ4=−1.Cosine and sine at π4 are equal and nonzero, so cotangent is 1.
Answer
−1
Double-check The original input is coterminal with 7π4, in Quadrant IV, where cotangent is negative.

Rung 6 of 6

The same negative input with an even function

Find cos(−9π4). In words, compare with the previous rung and notice which sign rule changes.

Show the steps and the answer
x = cos θy = sin θcos t > 0
Cosine is positive while cotangent is negative at the same original input.
  1. cos(−9π4)=cos9π4.Cosine is even, so no outside minus sign is introduced.
  2. 9π4−2π=π4.Cosine has period 2π.
  3. cosπ4=22.The 45° triangle supplies the exact value.
Answer
22
Double-check The original terminal point is in Quadrant IV. Its x-coordinate is positive, matching the answer.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: cos(−t)=−cost.
Changing the direction of the walk preserves the horizontal coordinate. At t = π3, cosine is 12 at both inputs.
✓ Instead: cos(−t) = cos t. Move the minus sign outside only for an odd function.
✗ Not this: An even function always has positive outputs.
Even describes how opposite inputs compare. It does not describe the output's sign. At t = 3π, cosine is −1, and cos(−3π) = −1 too.
✓ Instead: An even function has equal outputs at opposite inputs, including equal negative outputs.

Tips and tricks

  • Memory device: cosine and its reciprocal, secant, are the only even trig functions. The other four are odd.
  • Write the sign change as an equality before computing. A negative sign inside and a negative sign outside mean different things.

7 The trap

Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.

Keep in mind

  • A minus inside changes the angle and a minus outside flips the answer: with sin t = 0.96, sin(−t) = −0.96, but −sin(−t) = 0.96.
  • A negative angle mirrors across the x-axis, (x, y) to (x, −y); the y-axis mirror, (x, y) to (−x, y), belongs to a different angle, π − t (180° − t in degrees).
  • Even does not mean positive: cos(−3) and cos 3 are both about −0.990.
  • In an identity such as cos(−t) = cos t, LHS means the left-hand side, cos(−t), and RHS the right-hand side, cos t; a proof rewrites one side until it matches the other.

Memory hook

Cosine eats the minus sign; sine spits it out. Secant copies cosine; tangent, cotangent and cosecant copy sine.

Flash cards

Say the answer out loud, then flip.

What does 'odd function' mean?
f(−t) = −f(t) for every allowed t: a minus sign inside comes out front.
Which trig functions are even, and which are odd?
  • Even: cos, sec.
  • Odd: sin, csc, tan, cot.
csc t = 4. What is csc(−t)?
−4, because cosecant is odd.
P(t) = (−0.96, 0.28). Find cos(−t) and sin(−t).
  • The point for −t is (−0.96, −0.28).
  • cos(−t)=−0.96
  • sin(−t)=−0.28
cos t = 0.28. Is −cos t equal to cos(−t)?
No: cos(−t) = 0.28, but −cos t = −0.28.
In sin(−t) = −sin t, which side is the LHS?
sin(−t), the left-hand side of the equals sign.

Lesson 9 of 10

Combining properties to find signs and known exact values

Subject: MathematicsLeans on: Fractions with πLeans on: Sign multiplicationLeans on: Zero in a denominatorOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of reading a clock after several full days have passed. You remove whole days to find the same place on the clock face. You can do that with angles too. First handle a reversed walk, then remove extra repeats, then identify the stopping place. That place tells you whether the output is positive, negative, zero or undefined. If the remaining angle is one whose exact value you have learned, you can finish with that value. Sometimes the angle is unfamiliar. Then these properties still give its sign and an equivalent smaller angle, but they do not create a special exact value for every possible angle.

Explain it like I am five

Picture a car on a circular track whose trip log reads 'backward 1110 degrees'. To find where it stopped, first note that it went backward, then ignore the full laps, then look at the spot. Angles work the same way, in four steps.

Example: csc(−1110°), where csc means cosecant, 1 divided by sine.
Step 1, the minus inside: cosecant is odd (a minus inside comes out front), so csc(−1110°) = −csc 1110°. Keep that outside minus.
Step 2, whole laps: a full lap leaves the point where it was, and 1110 ÷ 360 is about 3.08, so remove 3 × 360° = 1080°, leaving 30°.
Step 3, the sign: 30° is in Quadrant I, where all six functions are positive.
Step 4, the known value: sin 30° = 12, so csc 30° = 1 ÷ 12 = 2. With the saved minus, csc(−1110°) = −2.

Check another way: −1110° + 4 × 360° = 330°, in Quadrant IV, below the x-axis, where cosecant is negative. It agrees.

2 Picture it

30°750°same terminal side
30° and 750° end on the same terminal side.
30°750°same terminal side
The same picture again: 30° and 750° end on the same terminal side.
input toutput sin t0 (0°)0π/6 (30°)1/2π/4 (45°)(√2)/2π/3 (60°)(√3)/2π/2 (90°)1π (180°)03π/2 (270°)−1
A table of 7 values of sin t, for t from 0 (0°) to 3π2 (270°).
input toutput cos t0 (0°)1π/6 (30°)(√3)/2π/4 (45°)(√2)/2π/3 (60°)1/2π/2 (90°)0π (180°)−13π/2 (270°)0
A table of 7 values of cos t, for t from 0 (0°) to 3π2 (270°).
input toutput tan t0 (0°)0π/6 (30°)(√3)/3π/4 (45°)1π/3 (60°)√3π/2 (90°)undefinedπ (180°)03π/2 (270°)undefined
A table of 7 values of tan t, for t from 0 (0°) to 3π2 (270°).
input toutput cot t0 (0°)undefinedπ/6 (30°)√3π/4 (45°)1π/3 (60°)(√3)/3π/2 (90°)0π (180°)undefined3π/2 (270°)0
A table of 7 values of cot t, for t from 0 (0°) to 3π2 (270°).
input toutput sec t0 (0°)1π/6 (30°)(2√3)/3π/4 (45°)√2π/3 (60°)2π/2 (90°)undefinedπ (180°)−13π/2 (270°)undefined
A table of 7 values of sec t, for t from 0 (0°) to 3π2 (270°).
input toutput csc t0 (0°)undefinedπ/6 (30°)2π/4 (45°)√2π/3 (60°)(2√3)/3π/2 (90°)1π (180°)undefined3π/2 (270°)−1
A table of 7 values of csc t, for t from 0 (0°) to 3π2 (270°).

Reminder

Reminder: Fractions with π, Sign multiplication, Zero in a denominator
  • Fractions with π. Match denominators before subtracting: 2π = 8π4, so 9π4 − 2π = π4.
  • Sign multiplication. An outside negative sign times a negative output is positive: −(−12) = 12.
  • Zero in a denominator. 0−1 = 0 is defined. 10 has no value.

3 Why

Each replacement preserves the expression's value. Even and odd symmetry handles the negative input, with a possible negative sign outside. A whole period preserves the function's output. The quadrant or axis point identifies its sign and whether a denominator is zero. A known special angle or an identity then gives an exact value when available. An angle such as 17° cannot be reduced to 30° by removing full turns, so the method must stop with its known sign or the expression itself.

4 The rule

Handle the input's minus sign, remove whole periods, identify a quadrant or an axis, then use a known exact value or a suitable identity.

For an unfamiliar angle, the properties can determine a sign or a smaller equivalent expression without determining a special exact value.

The same idea, five ways

Say it

Find the same output by replacing a difficult angle with one you can recognize.

Write it

Symmetry and periods simplify the input; its terminal point decides the sign and possible denominator failures.

In math
  • sin(−t)=−sint;cos(−t)=cost.
  • sin(t + 2nπ) = sin t; tan(t + nπ) = tan t, for integer n.
  • At P(x, y), sin t = y, cos t = x, tan t = yx, cot t = xy, sec t = 1x, csc t = 1y.
Like

Remove full days from a clock reading, then inspect the place where the hand stops.

See it
30°750°same terminal side
Removing two full turns changes 750° into 30° without changing the stopping point.

The same idea, other ways

As a sequence of equivalent expressions

Keep an equality at every stage: sin(−750°) = −sin 750° = −sin 30° = −12. The outside negative sign stays visible while the input gets smaller.

sin(−750°)

=−sin750°

=−sin30°

=−12

As one direct walk

You may also add whole turns directly to a negative input. For example, −750° + 3 × 360° = 330°. The original stopping place is in Quadrant IV, so sine is negative. This gives an independent sign check on the odd-symmetry route.

-750°330°same terminal side
Both rotations stop in Quadrant IV.
As the question's stopping point

For a trigonometric function, the quadrant determines its sign, and a sign question stops there; on an axis, check whether its value is positive, negative, zero or undefined. An exact-value question needs one more ingredient, a value you know or an identity that cancels unfamiliar values. Do not keep computing after you have answered the requested question.

Sign: locate and combine signs.

Exact value: use a known value or identity.

On an axis: inspect denominators.

tsin tcos ttan tcot tsec tcsc t
0 (0°)010undefined1undefined
π6(30°)12323332332
π4(45°)22221122
π3(60°)32123332233
π2(90°)10undefined0undefined1
π (180°)0−10undefined−1undefined
3π2(270°)−10undefined0undefined−1

Part 1: First decide what the question asks

A question may ask for a sign rather than a full value, the way a map may ask whether a town lies east or west without asking its distance.

  • A sign answer is positive, negative or zero.
  • An undefined expression has no sign or output.
  • An exact value needs more information than a quadrant alone.

Sign: positive, negative or zero.

Undefined: no output.

Exact value: preserve the exact amount.

Worked example

An unfamiliar angle can still have a known sign

Decide the sign of sin 17°. The question asks for positive, negative or zero.

Show the steps and the answer
x = cos θy = sin θsin 17° > 0
The positive height settles the sign question.
  1. 0°<17°<90°, so the terminal point is in Quadrant I.This is between the rightmost and topmost axis points.
  2. sin17°>0.Sine is the positive height in Quadrant I.
Answer
positive
Double-check The point is above the x-axis. Its precise height is unnecessary for a sign question.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The sine in Quadrant I must be 12.
A quadrant contains many heights; 12 belongs to specific angles.
✓ Instead: Quadrant I tells you sine is positive, not which positive value it has.
Tips and tricks
  • Underline the requested answer type before working.

Part 2: Remove a negative input with symmetry

Reverse a backward walk into a forward walk, while recording whether the function reverses its output.

  • Cosine and secant preserve the output.
  • Sine, cosecant, tangent and cotangent reverse the output.

Even: f(−t) = f(t).

Odd: f(−t) = −f(t).

Worked example

Keep the outside sign visible

Rewrite sin(−750°) using a positive input before evaluating it.

Show the steps and the answer
-750°330°same terminal side
The backward walk ends below the x-axis.
  1. sin(−750°)=−sin750°.Sine is odd, so reversing the input reverses the output.
Answer
−sin750°
Double-check The original input reduces to 330°, where sine is negative, so the eventual outside sign must be kept.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Drop every input minus sign.
Only even functions allow that.
✓ Instead: For odd functions, move the minus sign outside.
Tips and tricks
  • Write the outside negative sign before changing the angle.

Part 3: Remove repeats with the correct period

Remove complete repeats the way you remove full days from a clock reading.

  • Sine, cosine, secant and cosecant repeat every 2π.
  • Tangent and cotangent repeat every π.
  • A π shortcut may change the quadrant while preserving a tangent or cotangent value.
45°405°same terminal side
A full-turn reduction preserves every function's value.

Worked example

A tangent period is shorter than a full turn

Rewrite tan 13π4 with a known input.

Show the steps and the answer
x = cos θy = sin θtan = 1
Both coordinates reverse together, preserving tangent.
  1. 3π=12π4, so 13π4−3π=π4.Three tangent periods fit inside the positive input.
  2. tan13π4=tanπ4=1.Tangent repeats every π.
Answer
1
Double-check The full-turn representative is 5π4, in Quadrant III, where tangent is also positive.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Subtract π from every trig input.
For sine, cosine, secant and cosecant a half turn changes the sign.
✓ Instead: Use π only for tangent and cotangent; use 2π for the other four.
Tips and tricks
  • Write the function's period beside the problem.

Part 4: Use the stopping point and a known value

After removing repeats, inspect where the walk ends. A familiar point gives an exact coordinate. An axis point also reveals denominator zeros.

  • A quadrant gives signs.
  • A known special angle gives exact coordinates.
  • An axis point can give zero outputs or undefined fractions.
x = cos θy = sin θ(0, 1)
Inspect the denominator at an axis point.

Worked example

An axis prevents evaluation of a reciprocal

Decide whether sec(−810°) has a value. The question asks whether cosine's reciprocal can be taken.

Show the steps and the answer
x = cos θy = sin θx = 0
A horizontal coordinate of 0 makes secant undefined.
  1. Secant is even, so consider the positive input 810°. Remove two full turns: 810°−720°=90°.Secant preserves opposite inputs and repeats every 360°.
  2. At 90°,P=(0,1), so cos90°=0.A counterclockwise quarter turn reaches the top point.
  3. Secant would require dividing 1 by 0, so the original expression is undefined.A zero denominator has no quotient.
Answer
undefined
Double-check Direct reduction gives −810° + 3 × 360° = 270°, whose cosine is also 0.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: sec 90° = 0 because cos 90° = 0.
Taking a reciprocal puts that 0 on the bottom.
✓ Instead: sec 90° is undefined.
Tips and tricks
  • Use the coordinate first, then build the requested function.

5 How

  1. 1. Read whether the request is a location or a function value or sign. For a location, keep the original signed angle, reduce only by full turns of 2π or 360°, then use its terminal point and stop. Changing the sign of the angle or using a tangent half-period may change its location.
  2. 2. If the angle is negative, use even or odd symmetry and record any outside negative sign.
  3. 3. Remove whole periods: 2π or 360° for sin, cos, sec and csc; π or 180° for tan and cot.
  4. 4. Locate the reduced angle. If it is on an axis, use its coordinates and check denominators. Otherwise use the quadrant to determine the reduced expression's sign.
  5. 5. For a sign question, combine the reduced expression's sign with the outside sign and stop. For an exact-value question, use a known value or an identity. If neither applies, retain the exact expression instead of inventing a value.
  6. Read a reference-table entry in the column under its input or category in the matching picture.

Reduce and evaluate a trig expression

1
Does the question ask for the original angle's location?
YesReduce the original signed angle by full turns of 2π or 360°. Name its original quadrant or axis and stop.
NoContinue with even or odd symmetry and the requested function's period to find its value or sign.
↓
2
Is the original input negative?
YesApply even or odd symmetry and record the outside sign.
NoKeep the expression's present outside sign.
↓
3
Is the reduced angle on an axis?
YesUse the axis coordinates. A denominator of 0 means undefined, even if an outside sign is present.
NoUse the quadrant sign rules.
↓
4
Does the question ask only for the sign?
YesCombine the outside sign and the reduced expression's sign, then stop.
NoLook for a known special value or an identity.
↓
5
Is there a known exact value or an identity that finishes the calculation?
YesShow that substitution or simplification and give the exact result.
NoGive the equivalent exact expression and any known sign. These properties alone do not supply every unfamiliar value.
  1. Read whether the request is a location or a function value or sign. For a location, keep the original signed angle, reduce only by full turns of 2π or 360°, then use its terminal point and stop. Changing the sign of the angle or using a tangent half-period may change its location.
  2. If the angle is negative, use even or odd symmetry and record any outside negative sign.
  3. Remove whole periods: 2π or 360° for sin, cos, sec and csc; π or 180° for tan and cot.
  4. Locate the reduced angle. If it is on an axis, use its coordinates and check denominators. Otherwise use the quadrant to determine the reduced expression's sign.
  5. For a sign question, combine the reduced expression's sign with the outside sign and stop. For an exact-value question, use a known value or an identity. If neither applies, retain the exact expression instead of inventing a value.

6 Worked example

Worked example

One angle, three questions: θ = −1020°

Let θ = −1020°. Answer three questions without a calculator. (a) In which quadrant does the terminal side of θ lie, or does it lie on an axis? (b) Find the exact value of cos(−1020°). (c) Decide whether tan(−1020°) is positive, negative, zero or undefined. Use the odd property of tangent and its period of 180°.

Show the steps and the answer
60°-1020°same terminal side
The angle −1020° turns clockwise almost three full turns.
  1. Part (a) asks for a location. Keep the signed angle −1020° and add full turns: −1020°+3·360°=−1020°+1080°=60°.Adding whole turns of 360° keeps the terminal side the same. Changing the sign to +1020° would give 300°, which is a different place.
  2. 60° lies between 0° and 90°, so the terminal side of θ is in Quadrant I. Stop here for part (a).Location depends only on where the terminal point lies after the reduction by full turns.
  3. Part (b): cosine is even, so cos(−1020°)=cos(1020°). There is no outside sign.cos(−t) = cos t for every t.
  4. Remove whole periods of 360°: 1020°−2·360°=300°. So cos(1020°)=cos300°.Cosine has period 360°.
  5. 300° is in Quadrant IV, where cosine is positive. Its reference angle is 360°−300°=60°. So cos300°=cos60°=12.In Quadrant IV the x-coordinate is positive. The known exact value is cos 60° = 12.
  6. Part (c): tangent is odd, so tan(−1020°)=−tan(1020°). Record the outside negative sign.tan(−t) = −tan t for every t where tangent is defined.
  7. Remove whole periods of 180°: 1020°−5·180°=1020°−900°=120°. So tan(1020°)=tan120°.Tangent has period 180°. This reduction is used only for the value, not for the location.
  8. 120° is in Quadrant II, where tangent is negative, so tan120°<0. Combine this with the outside sign: −(negative) is positive. So tan(−1020°)>0.For a sign question you multiply the outside sign by the sign of the reduced expression, and then you stop.
Answer
(a) Quadrant I. (b) cos(−1020°) = 12. (c) tan(−1020°) is positive.
Double-check −1020° is coterminal with 60°. Then cos 60° = 12, which matches (b). Also tan 60° = 3 > 0, which matches (c). Both coordinates are positive in Quadrant I, which agrees with (a).

Work to write

  1. −1020° + 1080° = 60°, so the terminal side is in Quadrant I
  2. cos(−1020°)=cos(1020°)=cos(300°)=cos60°=12
  3. tan(−1020°)=−tan(1020°)=−tan(120°)
  4. tan 120° < 0, so tan(−1020°) > 0

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

One extra full turn

Find sin 390°. The input is one extra turn past a known angle.

Show the steps and the answer
30°390°same terminal side
The two angles stop at the same point.
  1. 390°−360°=30°.Sine has period 360°.
  2. sin390°=sin30°=12.The 30° sine is a known exact value.
Answer
12
Double-check 390° ends in Quadrant I, where sine is positive.

Rung 2 of 7

An even function with a negative large input

Find cos(−420°). Reverse the input and remove a full turn.

Show the steps and the answer
-420°300°same terminal side
The original input stops to the right of the y-axis.
  1. cos(−420°)=cos420°.Cosine is even.
  2. 420°−360°=60°, so cos420°=cos60°.Cosine repeats every 360°.
  3. cos60°=12.The 60° special triangle gives this coordinate.
Answer
12
Double-check The original input reduces to 300°, in Quadrant IV, where cosine is positive.

Rung 3 of 7

Several tangent periods

Find tan 17π4. Remove tangent periods to reach a known input.

Show the steps and the answer
x = cos θy = sin θtan = 1
Equal coordinates produce tangent 1.
  1. 4π=16π4, so 17π4−4π=π4.Four tangent periods fit in the input.
  2. tan17π4=tanπ4=1.Tangent repeats every π, and equal triangle legs give tangent 1.
Answer
1
Double-check Removing full turns also gives π4, whose sine and cosine are equal.

Rung 4 of 7

A negative reciprocal function

Find csc(−13π6). Keep the outside sign while reducing.

Show the steps and the answer
x = cos θy = sin θsin t = −1/2
The negative height has reciprocal −2.
  1. csc(−13π6)=−csc13π6.Cosecant is odd.
  2. 13π6−2π=13π6−12π6=π6.Cosecant has period 2π.
  3. −cscπ6=−(1÷12)=−2.Cosecant is the reciprocal of the known sine.
Answer
−2
Double-check The original angle reduces to 11π6, in Quadrant IV, where cosecant is negative.

Rung 5 of 7

A zero denominator

Determine sec(−810°). The task is to decide whether an output exists.

Show the steps and the answer
x = cos θy = sin θcos t = 0
The zero x-coordinate blocks secant.
  1. Use even symmetry to consider sec810°.Secant keeps its output when the input sign changes.
  2. 810°−2×360°=90°, whose point is (0, 1).Remove two full periods.
  3. cos90°=0, so secant's denominator is 0.Secant is 1 divided by cosine.
  4. The original secant is undefined.No number times 0 equals 1.
Answer
undefined
Double-check Directly reducing −810° gives 270°, also with cosine 0.

Rung 6 of 7

An unfamiliar angle, sign only

Decide the sign of sin(−220°). An exact decimal or special value is not requested.

Show the steps and the answer
-220°140°same terminal side
The original input ends above the x-axis.
  1. sin(−220°)=−sin220°.Sine is odd.
  2. 180°<220°<270°, so sin220° is negative.220° lies in Quadrant III, below the x-axis.
  3. The negative of that negative output is positive.Two sign reversals give a positive result.
Answer
positive
Double-check Direct reduction gives −220° + 360° = 140°, in Quadrant II, where sine is positive.

Rung 7 of 7

An unfamiliar fraction of π, sign only

Decide the sign of tan(−41π8). Find the sign without claiming a special exact value.

Show the steps and the answer
x = cos θy = sin θtan t < 0
The original terminal point gives a negative quotient.
  1. tan(−41π8)=−tan41π8.Tangent is odd.
  2. 5π=40π8, so 41π8−5π=π8.Five tangent periods reduce the positive input.
  3. 0<π8<π2, so tanπ8 is positive.The reduced angle is in Quadrant I.
  4. The outside negative sign makes the original output negative.The sign from the first step must be retained.
Answer
negative
Double-check A full-turn reduction of the original input is −41π8 + 6π = 7π8, in Quadrant II, where tangent is negative.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Every angle reduces to a special angle with an elementary exact value.
Removing full periods preserves the leftover angle. It does not turn 17° into 30°.
✓ Instead: Use known exact values where available. For an unfamiliar angle, report the sign or keep an exact expression such as sin 17°.
✗ Not this: sin(−750°)=sin30°=12.
The reduction of the positive input is correct, but the outside negative sign from odd symmetry was lost.
✓ Instead: sin(−750°)=−sin750°=−sin30°=−12.

Tips and tricks

  • Write every equality, including any sign outside the function. This makes sign losses visible.
  • A full-turn reduction is always safe for locating an angle. A π reduction is a value shortcut for tangent and cotangent, and the resulting angle may have a different terminal point.
  • When an answer is undefined, state which denominator is 0.

7 The trap

Losing the outside sign while reducing the input changes the expression. Carry it through every equality. Also check axis points before attempting a reciprocal: an undefined value cannot be fixed by moving a negative sign.

Keep in mind

  • Carry the outside minus through every line: csc(−1110°) = −csc 30° = −2, not 2.
  • Tangent and cotangent may drop 180° at a time while the other four need 360°: tan 1290° = tan(1290° − 7 × 180°) = tan 30°.
  • If the angle lands on an axis, read the axis point and check the bottom: 1170° − 1080° = 90°, where x = 0, so sec 1170° is undefined.
  • Some angles never become special angles: sin 1117° = sin 37°, and the method stops there with the sign, positive, instead of an exact value.

Memory hook

Minus, laps, map, value: handle the minus sign, strip whole laps, map the quadrant for the sign, then look up the value. Shrink first, sign second.

Flash cards

Say the answer out loud, then flip.

Name the four steps in order.
  • 1. The minus sign (even or odd).
  • 2. Remove whole periods.
  • 3. The quadrant gives the sign.
  • 4. The known value.
Sign of cos(−925°)?
Negative: cos(−925°) = cos 925° = cos 205°, and 205° is in Quadrant III.
sec(−780°) = ?
2: secant is even, 780° − 720° = 60°, and sec 60° = 2.
cot 1305° = ?
1: 1305° − 7 × 180° = 45°, and cot 45° = 1.
A student writes csc(−1110°) = 2. What went wrong?
The outside minus from the odd step was dropped. The answer is −2.

Lesson 10 of 10

All six functions from one value and a quadrant

Subject: MathematicsLeans on: Squaring a negative fractionLeans on: Common denominatorsLeans on: Square roots of fractionsLeans on: Dividing fractionsLeans on: RationalizingOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a ladder of length 1 reaching from the center of a circular track to its rim. Its height and horizontal reach must fit together to make that length. Knowing one tells you the size of the other. You still need to know whether the endpoint is above or below the center, and right or left. The quadrant supplies those directions and therefore the signs. Sine is the signed height, and cosine is the signed horizontal reach. Once you know those two, division and reciprocals produce the other four outputs. The same relationships also let you simplify expressions whose unfamiliar angles would otherwise block you.

Explain it like I am five

Picture a kite on a string exactly 1 unit long. Its height and its distance out from you are tied together by the Pythagorean theorem (in a right triangle, leg2 + leg2 = long side2): height2 + distance2 = 1. On the unit circle that reads sin2θ + cos2θ = 1. Here θ (theta) names the angle, and sin2θ means (sin θ)2, sine squared.

Example: sin θ = 2425 and θ is in Quadrant II, the upper left. Find cos θ.
Step 1: cos2θ = 1 − (2425)2 = 625625 − 576625 = 49625.
Step 2, the size: 49625 = 725. The symbol √ alone always means the positive root, the principal square root, even though −725 also squares to 49625.
Step 3, the sign: Quadrant II is left of center, so x is negative and cos θ = −725.

Then divide and flip: tan θ = 2425 ÷ (−725) = −247, cot θ = −724, sec θ = −257, csc θ = 2524.

2 Picture it

xyθx = 3y = −4rP(3, −4)Ox = 3 (3 right) y = −4 (4 down) r = 5the ray from O through P (and beyond) = the terminal side
The point P(3, −4) and its right triangle on the x axis.
xyθx = 3y = −4rP(3, −4)Ox = 3 (3 right) y = −4 (4 down) r = 5the ray from O through P (and beyond) = the terminal side
The same picture again: The point P(3, −4) and its right triangle on the x axis.
input Familyoutput Identities and restrictionsReciprocalcsc θ = 1/(sin θ) when sin θ ≠ 0; sec θ = 1/(cos θ) when cos θ ≠ 0; cot θ = 1/(tan θ) when sin θ ≠ 0 and cos θ ≠ 0.Quotienttan θ = (sin θ)/(cos θ) when cos θ ≠ 0; cot θ = (cos θ)/(sin θ) when sin θ ≠ 0.Pythagoreansin²θ + cos²θ = 1 for every real θ; tan²θ + 1 = sec²θ when cos θ ≠ 0; cot²θ + 1 = csc²θ when sin θ ≠ 0.
A table of 3 values of Identities and restrictions, for Family from Reciprocal to Pythagorean.

Reminder

Reminder: Squaring a negative fraction, Common denominators, Square roots of fractions, Dividing fractions, Rationalizing
  • Squaring a negative fraction. (−13)2 = 19, because multiplying two negative numbers gives a positive number.
  • Common denominators. 1−925=2525−925=1625.
  • Square roots of fractions. 1625 = 1625 = 45. This gives a size, before the quadrant chooses a sign.
  • Dividing fractions. (−45)÷35=(−45)×53=−43.
  • Rationalizing. 15 = 55, because multiplying top and bottom by 5 is multiplying by 1.

3 Why

The radius and the two coordinate legs form a right triangle. The Pythagorean theorem gives x2 + y2 = 1, so sin2θ + cos2θ = 1. Subtracting the known square gives the missing coordinate's square. Taking a square root gives its size, and the quadrant fixes its sign. Tangent, cotangent, secant and cosecant are defined from these coordinates by quotients and reciprocals. Dividing the Pythagorean identity by a nonzero cosine square or sine square gives the other two identities, with their denominator restrictions.

4 The rule

sin2θ+cos2θ=1.

Thus cosθ=±1−sin2θ and sinθ=±1−cos2θ, with the sign chosen by the quadrant. Then tanθ=sinθcosθ,cotθ=cosθsinθ,secθ=1cosθ,cscθ=1sinθ, wherever the denominator is nonzero.

The same idea, five ways

Say it

The square of sine plus the square of cosine is one. Knowing one coordinate and the quadrant lets you recover the other.

Write it

A point one unit from the origin has coordinate squares that add to one; its location chooses the signs.

In math
  • sin2θ+cos2θ=1.
  • cosθ=±1−sin2θ;sinθ=±1−cos2θ.
  • tan2θ + 1 = sec2θ when cos θ ≠ 0.
  • cot2θ + 1 = csc2θ when sin θ ≠ 0.
Like

A ladder's height and horizontal reach must fit its fixed length; its location decides the coordinate signs.

See it
x = cos θy = sin θP(3/5, 4/5)
The coordinate squares are 925 and 1625, which add to 1.

The same idea, other ways

As a ladder

A ladder of length 1 has horizontal reach cos θ and height sin θ, interpreted as signed coordinates. The physical side lengths are their magnitudes. The Pythagorean theorem connects their squares. The quadrant chooses the coordinate directions.

θ|cos θ||sin θ|1
The triangle's lengths are magnitudes, while the circle coordinates carry signs.
With small numbers

Suppose the horizontal coordinate is 35. Its square is 925. The remaining height square is 1 − 925 = 1625, so the height has size 45. The point may be above or below the center; the quadrant settles that final choice.

xyθx = 3y = −4rP(3, −4)Ox = 3 (3 right) y = −4 (4 down) r = 5the ray from O through P (and beyond) = the terminal side
The scaled triangle has legs 3 and 4 and radius 5.
As two possible locations

One coordinate usually leaves two points on the circle. A horizontal position 35 gives heights 45 and −45. The quadrant is the instruction that selects one of those points.

x = cos θy = sin θQIV chooses y = −4/5
Quadrant IV selects the lower of the two possible points.
As a rebuilding kit

Keep sine and cosine as the two basic coordinates. Build tangent by dividing height by horizontal position, cotangent by reversing that division, and secant and cosecant by taking reciprocals. This rebuilds the six values without six separate guesses.

tan θ = sin θ ÷ cos θ

cot θ = cos θ ÷ sin θ

sec θ = 1 ÷ cos θ

csc θ = 1 ÷ sin θ

FamilyIdentities and restrictions
Reciprocalcsc θ = 1sinθ when sin θ ≠ 0; sec θ = 1cosθ when cos θ ≠ 0; cot θ = 1tanθ when sin θ ≠ 0 and cos θ ≠ 0.
Quotienttan θ = sinθcosθ when cos θ ≠ 0; cot θ = cosθsinθ when sin θ ≠ 0.
Pythagoreansin2θ + cos2θ = 1 for every real θ; tan2θ + 1 = sec2θ when cos θ ≠ 0; cot2θ + 1 = csc2θ when sin θ ≠ 0.

Part 1: Reciprocal identities and their allowed inputs

A reciprocal is one divided by a nonzero number, like changing halves per whole into wholes per half. The sine and cosecant pair and the cosine and secant pair are reciprocals wherever the relevant coordinate is not zero. Tangent and cotangent are reciprocals only where both are defined and nonzero.

  • csc θ = 1sinθ, with sin θ ≠ 0.
  • sec θ = 1cosθ, with cos θ ≠ 0.
  • cot θ = 1tanθ, with sin θ ≠ 0 and cos θ ≠ 0.
  • sin θ · csc θ = 1 and cos θ · sec θ = 1 on their respective common domains.
  • tan θ · cot θ = 1 when sin θ ≠ 0 and cos θ ≠ 0.

sin θ · csc θ = 1, sin θ ≠ 0

cos θ · sec θ = 1, cos θ ≠ 0

tan θ · cot θ = 1, sin θ cos θ ≠ 0

Reminder
Reminder: A reciprocal keeps the sign
  • A reciprocal keeps the sign. The reciprocal of −15 is −5, and their product is 1.

Worked example

A reciprocal identity with a negative value

Suppose cos θ = −15. The question gives a nonzero cosine and asks for secant and the product of this reciprocal pair.

Show the steps and the answer

cosθ=−15

sec θ = −5

(−15)(−5)=1

  1. secθ=1÷(−15)=−5.Secant is the reciprocal of cosine, and the given cosine is nonzero.
  2. (−15)×(−5)=1.The two negative signs cancel, and the factors 5 cancel.
Answer
  • sec θ = −5
  • cos θ · sec θ = 1
Double-check The secant and cosine signs match, as reciprocals must.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: cot θ = 1tanθ can be used at every input where cotangent exists.
At θ = π2, cotangent is 0 but tangent is undefined, so 1 divided by tangent cannot be used there.
✓ Instead: Use cot θ = cosθsinθ on its full domain. The reciprocal formula requires both sine and cosine to be nonzero.
Tips and tricks
  • Before writing 1 divided by a function, check that the function exists and is not 0.

Part 2: Quotient identities rebuild tangent and cotangent

A quotient is a division result. Picture a ramp: tangent compares the signed rise with the signed horizontal run. Cotangent reverses that comparison. These are definitions, so using them replaces a function name with the coordinates that give its value.

  • tan θ = sinθcosθ when cos θ ≠ 0.
  • cot θ = cosθsinθ when sin θ ≠ 0.
  • A zero top with a nonzero bottom gives 0. A zero bottom gives an undefined expression.
θ|cos θ||sin θ|1
Tangent compares rise with run; the quadrant supplies each coordinate's sign.
Reminder
Reminder: Different signs in a quotient
  • Different signs in a quotient. 3−4=−34.

Worked example

All six functions from a secant in Quadrant IV

Suppose sec θ = 74 and θ lies in Quadrant IV. Find sin θ, cos θ, tan θ, cot θ and csc θ exactly. Rationalize any denominators.

Show the steps and the answer
  1. Name the given value and the targets. Given: secθ=74,θ in Quadrant IV. Find: sinθ,cosθ,tanθ,cotθ,cscθ.One trig value and a quadrant fix all six functions. Listing the targets keeps each of the five in view.
  2. Check the given value against Quadrant IV. In Quadrant IV, cosθ>0 and sinθ<0, so secθ>0. Also |secθ|=74>1.Inside a quadrant, 0 < |cos θ| < 1, so |sec θ| must be greater than 1. Its sign must match cosine's sign, which is positive in Quadrant IV. Both conditions hold, so such a θ exists.
  3. Take the reciprocal of secant: cosθ=1secθ=174=47.Secant is the reciprocal of cosine. Dividing 1 by 74 means multiplying by 47.
  4. Substitute into the identity: sin2θ+(47)2=1, so sin2θ=1−1649=4949−1649=3349.sin2θ + cos2θ = 1. Solving for sin2θ gives the size of sine without choosing its sign yet.
  5. Take the nonnegative root: 3349=337. In Quadrant IV sine is negative, so sinθ=−337.The square root gives only the magnitude. The quadrant decides the sign, and below the x-axis the y-coordinate is negative.
  6. tanθ=sinθcosθ=−33747=−337·74=−334.Tangent is sine divided by cosine. Dividing by 47 means multiplying by 74, and the sevens cancel.
  7. cotθ=1tanθ=−433=−433·3333=−43333.Cotangent is the reciprocal of tangent. Multiplying the top and bottom by 33 rationalizes the denominator.
  8. cscθ=1sinθ=−733=−733·3333=−73333.Cosecant is the reciprocal of sine. Rationalize by multiplying the top and bottom by 33.
Answer
sin θ = −337, cos θ = 47, tan θ = −334, cot θ = −43333, csc θ = −73333 (and sec θ = 74 as given).
Double-check Identity: sin2θ + cos2θ = 3349 + 1649 = 4949 = 1. Signs in Quadrant IV: sin −, cos +, tan −, cot −, sec +, csc −, all as found. Given value: 1cosθ = 147 = 74 = sec θ.

Work to write

  1. sec θ = 74 > 1 and is positive, so it is valid in Quadrant IV.
  2. cos θ = 1secθ = 47
  3. sin2θ=1−1649=3349
  4. sin θ = −337 (negative in Quadrant IV)
  5. tanθ=−33747=−334
  6. cot θ = −433 = −43333
  7. csc θ = −733 = −73333
  8. Check: 3349 + 1649 = 1
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: tanθ=cosθsinθ.
That division reverses the definition and gives cotangent instead.
✓ Instead: tan θ = sinθcosθ; cot θ = cosθsinθ.
Tips and tricks
  • Tangent is height divided by horizontal position. Write y ÷ x before converting to trig names.

Part 3: The three Pythagorean identities and why they hold

The radius and coordinate legs form a triangle. Its two leg squares add to the radius square. Because the radius is 1, the total is 1. The other two identities come from dividing every term by one nonzero coordinate square, like changing all measurements in an equation to the same unit.

  • sin2θ means (sin θ)2. It squares the output, rather than the angle.
  • sin2θ + cos2θ = 1 for every real θ.
  • tan2θ + 1 = sec2θ when cos θ ≠ 0.
  • cot2θ + 1 = csc2θ when sin θ ≠ 0.
  • The identities sec2θ − tan2θ = 1 and csc2θ − cot2θ = 1 are rearrangements of the same facts.
x = cos θy = sin θ(4/5, 3/5)
The coordinate squares add to the radius square: 1625 + 925 = 1.
Reminder
Reminder: Dividing an equation
  • Dividing an equation. Divide every term on both sides by the same nonzero number. Dividing 4 + 5 = 9 by 3 gives 43 + 53 = 3.

Worked example

Derive all three identities

Explain why the three Pythagorean identities hold, and state when each formula is defined.

Show the steps and the answer

sin2θ+cos2θ=1

Divide by cos2θ: tan2θ + 1 = sec2θ

Divide by sin2θ: cot2θ + 1 = csc2θ

  1. For a unit-circle point away from the axes, the coordinate legs and radius form a right triangle, giving x2+y2=12=1. On an axis, the coordinates are 0 and ±1, so the same equality holds directly.The coordinate legs and radius form a right triangle, with radius 1.
  2. Substitute x=cosθ and y=sinθ: sin2θ+cos2θ=1.Sine and cosine are the coordinate definitions.
  3. When cosθ≠0, divide every term by cos2θ: (sinθ÷cosθ)2+1=(1÷cosθ)2.Dividing both sides by the same nonzero quantity preserves equality and turns the cosine square term into 1.
  4. Use the quotient and reciprocal definitions: tan2θ+1=sec2θ.Sine divided by cosine is tangent; 1 divided by cosine is secant.
  5. When sinθ≠0, divide the original identity by sin2θ: 1+(cosθ÷sinθ)2=(1÷sinθ)2.The same nonzero division turns the sine square term into 1.
  6. Thus cot2θ+1=csc2θ.Cosine divided by sine is cotangent; 1 divided by sine is cosecant.
Answer
  • sin2θ + cos2θ = 1 for every real θ.
  • tan2θ + 1 = sec2θ when cos θ ≠ 0.
  • cot2θ + 1 = csc2θ when sin θ ≠ 0.
Double-check At θ = π4, sine and cosine squares each equal 12, while tangent and cotangent squares each equal 1 and secant and cosecant squares each equal 2. Each identity checks.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: sin2θ+cos2θ=(sinθ+cosθ)2.
Squaring a sum also produces the cross term 2 sin θ cos θ. The Pythagorean identity contains no such cross term.
✓ Instead: Add the two separate output squares: (sin θ)2 + (cos θ)2 = 1.
✗ Not this: tan2θ + 1 = sec2θ can be evaluated on the y-axis.
Both tangent and secant divide by cosine. On the y-axis cosine is 0.
✓ Instead: Apply this identity only when cos θ ≠ 0.
Tips and tricks
  • Rebuild the other two identities from sin2θ + cos2θ = 1 by dividing by the appropriate nonzero square.

Part 4: The algebra behind verifying and simplifying an identity

Verifying an identity means turning one side into the other without changing its value, like exchanging a coin for equivalent smaller coins. Work on one side. Replace trig names by sine and cosine, use equal-sized fraction pieces, and cancel only a common nonzero factor that multiplies an entire top and bottom.

  • LHS means left side. RHS means right side.
  • Multiplication distributes: a(b + c) = ab + ac. Reversing this rule factors a common factor: ab + ac = a(b + c).
  • With a nonzero bottom b, a = abb. This gives a whole term the same denominator as a nearby fraction.
  • A factor multiplies an entire expression. You may cancel such a factor from a fraction only when it is nonzero.
  • A numerical substitution checks a result at one input. It does not prove an identity for all allowed inputs.
=LHSRHSdo the same thing to both sides
A verification rewrites one side with equal expressions until the two sides match.
Reminder
Reminder: Common denominators, A factor of 1
  • Common denominators. 25 + 35 = 55 = 1, because both terms count fifths.
  • A factor of 1. For b ≠ 0, bb = 1. This is why multiplying top and bottom by the same nonzero quantity preserves a fraction.

Worked example

Make denominators match before combining

For sin t ≠ 0, simplify (cos2t ÷ sin t) + sin t. In words, combine two terms into one expression.

Show the steps and the answer

cos2t÷sint+sint

=(cos2t+sin2t)÷sint

= 1 ÷ sin t

= csc t

  1. Rewrite sin t as sin2tsint.Multiplying sin t by sintsint multiplies by 1, since sin t ≠ 0. This gives both terms the same bottom.
  2. cos2tsint+sin2tsint=cos2t+sin2tsint.Fractions with equal nonzero bottoms combine by adding their tops.
  3. cos2t+sin2tsint=1sint=csct.The Pythagorean identity turns the top into 1, and the reciprocal definition gives cosecant.
Answer
csc t, with sin t ≠ 0
Double-check At t = π6, the left expression is (34 ÷ 12) + 12 = 32 + 12 = 2. The right expression is csc π6 = 2.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Cancel a term from a sum: a+ba = b.
The top is a sum, so a does not multiply the whole top. For a = 4 and b = 8, a+ba = 3, rather than 8.
✓ Instead: If a ≠ 0, a+ba = 1 + ba. Cancel only whole common factors.
✗ Not this: A test at one angle proves an identity.
One matching input cannot establish equality at every allowed input.
✓ Instead: Use a chain of justified algebraic equalities for proof; use a numerical test only as a check.
✗ Not this: The original fraction 7−tanθ7cscθ−secθ equals sin θ even when tan θ = 7.
At that input its entire bottom is 0, so the original expression is undefined. Cancelling a zero factor would be division by zero.
✓ Instead: The simplification equals sin θ only with the original restrictions, including tan θ ≠ 7.
Tips and tricks
  • Write restrictions before changing fractions. Keep them even after a denominator cancels.
  • When proving, keep the target side visible but work on the other side.

Part 5: When tangent or cotangent is the given value

A ratio tells you how two coordinates compare, like knowing a ramp's rise for each unit of run. It does not directly give their sizes on a circle of radius 1. Write one coordinate as a multiple of the other. The sum-of-squares identity then fixes the scale, and the quadrant fixes the signs.

  • If tan θ = q, then sin θ = q cos θ when cos θ ≠ 0.
  • If cot θ = q, then cos θ = q sin θ when sin θ ≠ 0.
  • Substitution means replacing a quantity by an equal expression.
  • For tan θ = q, (q2 + 1)cos2θ = 1. For cot θ = q, (q2 + 1)sin2θ = 1.
θ74√65
A rise-to-run magnitude ratio of 47 gives legs 4 and 7 before scaling to radius 1.
Reminder
Reminder: Solving for a square
  • Solving for a square. If 6549 z2 = 1, divide by 6549 to get z2 = 4965. This finds the size that the final square root uses.

Worked example

Recover the scale from a tangent ratio

tan θ = −47 and θ is in Quadrant II. Find sine and cosine first. The ratio gives their comparison, while the identity gives their sizes.

Show the steps and the answer
θ74√65
Divide both leg sizes by 65, then give cosine the Quadrant II negative sign.
  1. sinθ=(−47)cosθ.Multiply the quotient equation sin θ ÷ cos θ = −47 by the nonzero cosine. This expresses sine in terms of cosine.
  2. (−47cosθ)2+cos2θ=1, so (1649+1) cos2θ=1.Substitute the equal expression for sine into sin2θ + cos2θ = 1 and square the factors.
  3. 6549cos2θ=1, hence cos2θ=4965.Combine 1649 + 4949, then divide by 6549. This isolates the cosine square and finds its size.
  4. cosθ=−765=−76565.The square root gives size 765. Quadrant II requires negative cosine. Rationalizing preserves the value.
  5. sinθ=(−47)×(−765)=465=46565.Use the original ratio relation. The two negative signs cancel, giving positive sine in Quadrant II.
Answer
  • sinθ=46565
  • cosθ=−76565
Double-check Their quotient is −47, and their squares add to 1665 + 4965 = 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: tan θ = −47 means sin θ = −4 and cos θ = 7.
Those coordinates do not lie on a circle of radius 1, and their signs contradict Quadrant II.
✓ Instead: The ratio fixes proportional leg sizes. Normalize using the radius 65, and use the quadrant to choose signed coordinates.
Tips and tricks
  • A tangent or cotangent ratio gives a shape before it gives unit-circle coordinates.

5 How

  1. 1. Translate the request: one trig value and a quadrant are given; find each of the five other outputs.
  2. 2. Check the sign and range against the stated quadrant. Inside a quadrant both coordinates are nonzero: require 0 < |sin θ| < 1 and 0 < |cos θ| < 1, or |sec θ| > 1 and |csc θ| > 1. A given tangent or cotangent must be nonzero with the quadrant's sign. Reject an endpoint or zero that forces an axis.
  3. 3. If secant or cosecant is given, take its reciprocal to get cosine or sine. If tangent or cotangent is given, use its quotient formula to express sine in terms of cosine or cosine in terms of sine.
  4. 4. Substitute into sin2θ + cos2θ = 1. Solve for the missing square; this finds the coordinate's size without yet choosing its sign.
  5. 5. Take the nonnegative square root, then choose the coordinate's sign from the quadrant.
  6. 6. Use quotients and reciprocals for the other functions. Show division by fractions and any rationalizing.
  7. 7. Check the sum of the sine and cosine squares, every quadrant sign and the original given value.
  8. Read a reference-table entry in the column under its input or category in the matching picture.

Find five trig outputs from one given output

1
Does the given value have the quadrant's sign and fit its interior values: sine or cosine size strictly between 0 and 1, secant or cosecant size greater than 1, or nonzero tangent or cotangent?
YesThe given value is compatible with an interior quadrant. Continue, then verify that both rebuilt coordinates are nonzero.
NoState that the information is inconsistent with the quadrant. An axis value cannot lie inside a quadrant.
↓
2
Is secant or cosecant given?
YesTake its reciprocal to recover cosine or sine.
NoKeep a given sine or cosine, or use the quotient identity if tangent or cotangent is given.
↓
3
Is tangent or cotangent given?
YesFor tan θ = q, use sin θ = q cos θ. For cot θ = q, use cos θ = q sin θ. Substitute into sin2θ + cos2θ = 1 to find a coordinate square.
NoSubtract the known coordinate square from 1 to find the missing coordinate square.
↓
4
Does a denominator become zero?
YesMark that function undefined; do not take its reciprocal.
NoCompute the quotient or reciprocal and simplify its exact form.
  1. Translate the request: one trig value and a quadrant are given; find each of the five other outputs.
  2. Check the sign and range against the stated quadrant. Inside a quadrant both coordinates are nonzero: require 0 < |sin θ| < 1 and 0 < |cos θ| < 1, or |sec θ| > 1 and |csc θ| > 1. A given tangent or cotangent must be nonzero with the quadrant's sign. Reject an endpoint or zero that forces an axis.
  3. If secant or cosecant is given, take its reciprocal to get cosine or sine. If tangent or cotangent is given, use its quotient formula to express sine in terms of cosine or cosine in terms of sine.
  4. Substitute into sin2θ + cos2θ = 1. Solve for the missing square; this finds the coordinate's size without yet choosing its sign.
  5. Take the nonnegative square root, then choose the coordinate's sign from the quadrant.
  6. Use quotients and reciprocals for the other functions. Show division by fractions and any rationalizing.
  7. Check the sum of the sine and cosine squares, every quadrant sign and the original given value.

6 Worked example

Worked example

All six functions from cos θ = 27 in Quadrant IV

Suppose cos θ = 27 and the terminal side of θ lies in Quadrant IV. Find the exact values of sin θ, tan θ, cot θ, sec θ and csc θ. Rationalize any denominators.

Show the steps and the answer
P
Unit circle with the terminal point P of θ ≈ 287° in Quadrant IV.
  1. Given: cosθ=27,θ in Quadrant IV. Find: sinθ,tanθ,cotθ,secθ,cscθ.One trig value and a quadrant fix the point on the unit circle. The other five functions come from it.
  2. Check the given value. It is positive, and 0<27<1. In Quadrant IV, cosine is positive and sine is negative.Inside a quadrant both coordinates are nonzero with absolute value less than 1. Cosine is positive in Quadrant IV, so the data are consistent.
  3. Cosine is given directly, so no reciprocal or quotient step is needed. Substitute it into sin2θ+cos2θ=1: sin2θ+(27)2=1, so sin2θ=1−449=4549.The Pythagorean identity gives the size of the missing coordinate. Its sign is not chosen yet.
  4. Take the nonnegative root: 4549=457=357. Sine is negative in Quadrant IV, so sinθ=−357.The quadrant decides the sign. Points in Quadrant IV lie below the x-axis, so the y-coordinate is negative.
  5. tanθ=sinθcosθ=(−357)÷27=−357·72=−352.Dividing by a fraction means multiplying by its reciprocal. The 7s cancel.
  6. cotθ=1tanθ=−235=−2515.Cotangent is the reciprocal of tangent. Multiply top and bottom by 5 to rationalize: 35 · 5 = 15.
  7. secθ=1cosθ=72.Secant is the reciprocal of cosine.
  8. cscθ=1sinθ=−735=−7515.Cosecant is the reciprocal of sine. Rationalize by multiplying top and bottom by 5.
Answer
sin θ = −357, tan θ = −352, cot θ = −2515, sec θ = 72, csc θ = −7515
Double-check Pythagorean identity: sin2θ + cos2θ = 4549 + 449 = 4949 = 1. Signs in Quadrant IV: cos and sec are positive; sin, csc, tan and cot are negative. All six match. Given value: 1secθ = 27 = cos θ. Products: tan θ · cot θ = (−352)(−2515) = 3030 = 1, and sin θ · csc θ = (−357)(−7515) = 105105 = 1.

Work to write

  1. sin2θ=1−449=4549
  2. sin θ = −357 (negative in Quadrant IV)
  3. tanθ=−352
  4. cot θ = −2515
  5. sec θ = 72
  6. csc θ = −7515
  7. Check: 4549 + 449 = 1

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 6

All six functions from a positive sine in Quadrant II

Suppose sin θ = 817 and the terminal side of θ lies in Quadrant II. Find the exact values of cos θ, tan θ, cot θ, sec θ and csc θ.

Show the steps and the answer
An angle of about 152° in standard position.
  1. Given: sinθ=817, with θ in Quadrant II. Find cosθ,tanθ,cotθ,secθ and cscθ.One trig value and a quadrant are given, so the other five functions can be found.
  2. Check the given value: 0<817<1. In Quadrant II, sine is positive, so the sign matches.Inside a quadrant both coordinates are nonzero. That requires 0 < |sin θ| < 1 and the quadrant's sign. In Quadrant II, x < 0 and y > 0.
  3. Sine is already given, so no reciprocal or quotient conversion is needed.Step 3 applies only when secant, cosecant, tangent or cotangent is given.
  4. Substitute into sin2θ+cos2θ=1: (817)2+cos2θ=1. This gives 64289+cos2θ=1, so cos2θ=1−64289=289289−64289=225289.The Pythagorean identity gives the square of the missing coordinate before its sign is chosen.
  5. Take the nonnegative root: 225289=1517. In Quadrant II, cosine is negative, so cosθ=−1517.The square root gives the size of the coordinate. The quadrant decides its sign.
  6. tanθ=sinθcosθ=817÷(−1517)=817·(−1715)=−815. cotθ=cosθsinθ=−1517·178=−158.Dividing by a fraction means multiplying by its reciprocal, and the 17s cancel.
  7. secθ=1cosθ=1÷(−1517)=−1715. cscθ=1sinθ=1÷817=178.Secant and cosecant are the reciprocals of cosine and sine. No denominators contain roots, so nothing needs rationalizing.
  8. Check: (817)2+(−1517)2=64289+225289=289289=1. In Quadrant II, sine and cosecant are positive while cosine, tangent, cotangent and secant are negative. sinθ=817 matches the given value.The identity, every quadrant sign and the original value must all agree.
Answer
cos θ = −1517, tan θ = −815, cot θ = −158, sec θ = −1715, csc θ = 178
Double-check (817)2 + (−1517)2 = 64289 + 225289 = 1. Also tan θ · cot θ = (−815)(−158) = 1 and cos θ · sec θ = (−1517)(−1715) = 1. The signs fit Quadrant II, where only sine and cosecant are positive.

Work to write

  1. cos2θ=1−64289=225289
  2. cos θ = −1517 (Quadrant II, cosine negative)
  3. tanθ=817·(−1715)=−815
  4. cot θ = −158
  5. sec θ = −1715
  6. csc θ = 178
  7. Check: 64289 + 225289 = 1

Rung 2 of 6

All six functions from a cotangent in Quadrant III

Given cot θ = 2021 and θ lies in Quadrant III, find sin θ, cos θ, tan θ, sec θ and csc θ.

Show the steps and the answer
  1. Translate the request. Known: cotθ=2021, with θ in Quadrant III. Wanted: sinθ,cosθ,tanθ,secθ,cscθ.One trig value and a quadrant fix the point on the unit circle, so they fix all five other functions.
  2. Check the sign and the range. In Quadrant III, x < 0 and y < 0, so sinθ<0 and cosθ<0. That makes tanθ and cotθ positive. The given cotθ=2021 is positive and nonzero.A given cotangent must be nonzero and must have the quadrant's sign. It passes, so no axis point is forced.
  3. Use the quotient formula: cotθ=cosθsinθ=2021, so cosθ=2021sinθ.This writes cosine in terms of sine, which leaves one unknown for the identity.
  4. Substitute into sin2θ+cos2θ=1: sin2θ+400441sin2θ=1. Combine the terms: 441441sin2θ+400441sin2θ=841441sin2θ=1. So sin2θ=441841.The Pythagorean identity gives the size of the sine before its sign is chosen.
  5. Take the nonnegative root: 441841=2129. In Quadrant III sine is negative, so sinθ=−2129.Both 441 = 212 and 841 = 292 are perfect squares. The quadrant decides the sign.
  6. Find cosine: cosθ=2021·(−2129)=−2029. This value is negative, as Quadrant III requires.Substituting back into the quotient relation gives cosine, with its sign already correct.
  7. tanθ=sinθcosθ=(−2129)÷(−2029)=(−2129)·(−2920)=2120. This equals 1cotθ, as it should.Dividing by a fraction means multiplying by its reciprocal. The 29s cancel and the two negatives give a positive result.
  8. secθ=1cosθ=1÷(−2029)=−2920, and cscθ=1sinθ=1÷(−2129)=−2921. No rationalizing is needed because there are no radicals.Secant and cosecant are the reciprocals of cosine and sine. They keep the same signs.
Answer
sin θ = −2129, cos θ = −2029, tan θ = 2120, sec θ = −2920, csc θ = −2921 (and cot θ = 2021 as given).
Double-check Sum of squares: 441841 + 400841 = 841841 = 1. Signs: sin, cos, sec and csc are negative, and tan and cot are positive, which fits Quadrant III. Original value: cosθsinθ = (−2029) ÷ (−2129) = 2021 ✓.

Work to write

  1. Quadrant III: sin θ < 0, cos θ < 0, cot θ > 0 ✓
  2. cosθ=2021sinθ
  3. sin2θ+400441sin2θ=1⇒841441sin2θ=1⇒sin2θ=441841
  4. sin θ = −2129 (Quadrant III)
  5. cosθ=2021·(−2129)=−2029
  6. tanθ=(−2129)·(−2920)=2120
  7. sec θ = −2920, csc θ = −2921
  8. Check: 441841 + 400841 = 1

Rung 3 of 6

A root that must be simplified

sin θ = −27 and θ is in Quadrant IV. Find the other five exact outputs.

Show the steps and the answer
x = cos θy = sin θP((3√5)/7, −2/7)
The horizontal coordinate is positive and the height is negative.
  1. Cosine and secant are positive; sine, cosecant, tangent and cotangent are negative.Quadrant IV is right of the y-axis and below the x-axis.
  2. cos2θ=1−(−27)2=4949−449=4549.This subtraction isolates the missing coordinate's square.
  3. cosθ=4549=457=357.Cosine is positive here. The perfect-square factor 9 in 45 gives 45 = 35.
  4. tanθ=(−27)÷357=−235=−2515.The quotient definition gives tangent; multiplying top and bottom by 5 rationalizes it.
  5. cotθ=357÷(−27)=−352.Use cosine divided by sine.
  6. secθ=735=7515; cscθ=−72.Take the coordinate reciprocals and rationalize secant.
Answer
  • cosθ=357
  • tanθ=−2515
  • cot θ = −352
  • sec θ = 7515
  • csc θ = −72
Double-check The coordinate squares 449 and 4549 add to 1. Their signs fit Quadrant IV.

Rung 4 of 6

Begin with secant

sec θ = −3 and θ is in Quadrant II. Find the other five exact outputs.

Show the steps and the answer
x = cos θy = sin θcos θ = −1/3
Quadrant II chooses positive height and negative horizontal position.
  1. cosθ=1÷(−3)=−13.Taking secant's reciprocal recovers cosine.
  2. sin2θ=1−(−13)2=99−19=89.The identity isolates sine's square, which finds its magnitude.
  3. sinθ=89=223.Quadrant II has positive sine; 8 = 22.
  4. tanθ=223÷(−13)=−22.The quotient definition and the fraction reciprocal produce a negative tangent.
  5. cotθ=−122=−24; cscθ=322=324.Take the nonzero reciprocals and rationalize.
Answer
  • sinθ=223
  • cosθ=−13
  • tanθ=−22
  • cot θ = −24
  • csc θ = 324
Double-check The coordinate squares add to 89 + 19 = 1, and 1 ÷ cos θ = −3 recovers the given secant.

Rung 5 of 6

Begin with a fractional cosecant

csc θ = 72 and θ is in Quadrant II. Find the other five exact outputs.

Show the steps and the answer
x = cos θy = sin θP((−3√5)/7, 2/7)
The positive sine and negative cosine place the point in Quadrant II.
  1. sinθ=1÷72=27.Taking cosecant's reciprocal recovers sine.
  2. cos2θ=1−(27)2=4949−449=4549.Subtract the known sine square to isolate the unknown cosine square.
  3. cosθ=−4549=−357.The square root gives the size, and Quadrant II chooses negative cosine.
  4. tanθ=27÷(−357)=−235=−2515.Use the quotient formula and rationalize.
  5. cotθ=−352; secθ=−735=−7515.Use cosine divided by sine, then cosine's reciprocal.
Answer
  • sinθ=27
  • cosθ=−357
  • tanθ=−2515
  • cot θ = −352
  • sec θ = −7515
Double-check The coordinate squares add to 1, only sine and cosecant are positive, and 1 ÷ sin θ = 72 recovers the given value.

Rung 6 of 6

A quotient is given instead of a coordinate

tan θ = −47 and θ is in Quadrant II. Find the other five exact outputs.

Show the steps and the answer
θ74√65
Normalize the legs by the hypotenuse, then give cosine its Quadrant II negative sign.
  1. sinθ=(−47)cosθ.Multiply the tangent quotient equation by nonzero cosine to express sine in terms of cosine.
  2. (−47cosθ)2+cos2θ=1, so 6549cos2θ=1.Substitute into the Pythagorean identity, square the coefficient and combine 1649 + 4949.
  3. cos2θ=4965.Divide by 6549 to isolate the unknown square. This determines cosine's size.
  4. cosθ=−765=−76565.The square root gives size 765 and Quadrant II chooses negative cosine.
  5. sinθ=(−47)×(−765)=465=46565.Substitute into the ratio relation; two negative factors give positive sine.
  6. cotθ=−74,secθ=−657,cscθ=654.Take tangent's, cosine's and sine's reciprocals respectively.
Answer
  • sinθ=46565
  • cosθ=−76565
  • cot θ = −74
  • sec θ = −657
  • csc θ = 654
Double-check The quotient sin θ ÷ cos θ is −47, and the coordinate squares 1665 and 4965 add to 1.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A positive square root means the missing coordinate is positive.
The square root gives a nonnegative size. Both coordinate signs have that square; the quadrant chooses the sign.
✓ Instead: In Quadrant IV with cos θ = 35, sin θ = −1625 = −45.
✗ Not this: sin2θ means sin(θ2).
The exponent applies to the output of sine, not to its input. At θ = π2, (sin θ)2 = 1, while squaring the angle would be a different input.
✓ Instead: sin2θ means (sin θ)2.
✗ Not this: Cancellation makes a simplified formula valid at every input.
A cancelled factor may have been zero, making the original expression undefined. Algebra cannot create an original output there.
✓ Instead: Carry every restriction from the original expression through the final answer.
✗ Not this: sin θ = 1 and θ is in Quadrant I is consistent because the sign is positive.
Sine 1 forces cosine 0, so the terminal point is (0, 1) on an axis.
✓ Instead: No angle inside Quadrant I has sine 1; inside a quadrant, both coordinates are nonzero and sine's size is less than 1.

Tips and tricks

  • Memory device: coordinate squares add to the radius square. On the unit circle, that radius square is 1.
  • Write the quadrant signs above the calculations. Use them again after you take each square root.
  • Check both the identity and the original given value. A correct sum of squares alone cannot catch every wrong sign.
  • For an identity, begin with one side and preserve its allowed inputs through each change.
  • Know cold:
    Sine reads y and cosine reads x. Memory device: cosine names the horizontal coordinate; sine names height.
    A zero denominator means undefined. Memory device: zero on the bottom blocks division.
    The quadrant sign pattern. Memory device: All Students Take Calculus.
    The period pattern. Memory device: ratios repeat after half a lap; coordinates and their reciprocals need a full lap.
    The even pair. Memory device: cosine and its reciprocal secant are even.
    The unit-circle square rule. Memory device: coordinate squares add to the radius square.
  • Understand, then rebuild when needed:
    Rebuild the tangent and cotangent signs by dividing the coordinate signs.
    Rebuild the other two Pythagorean identities by dividing the unit-circle identity by a nonzero coordinate square.
    Rebuild the missing coordinate from the given square and the quadrant sign.
    Rebuild the special-angle reciprocals from sine and cosine. These take a few steps; you do not need six unrelated memorized lists.
  • Put on the study reference card or look up while studying:
    The six-function domain and range table.
    The special-angle and axis-point tables.
    The sine and cosine direction-of-change intervals.
    For a closed-book exam, use the card to practice rebuilding the facts, then practice without it.

7 The trap

Taking the sign from the square root. 1625 = 45 is positive, but in Quadrant IV sine is negative, so sin θ = −45. The quadrant decides the sign, never the square root.

Keep in mind

  • √ alone is never negative, but squaring hides the sign: 49625 = 725, yet 725 and −725 both square to 49625.
  • Check that the given value is possible before starting: sin θ = 98 has no angle, because 98 = 1.125 > 1.
  • sin2θ means (sin θ)2, the output squared, not sin(θ2): with sin θ = 0.6, sin2θ = 0.36.
  • Finish with a check: (−725)2 + (2425)2 = 49625 + 576625 = 1, and only sine and cosecant came out positive, as Quadrant II requires.

Memory hook

Root for the size, quadrant for the sign: √ says how big, All Students Take Calculus says plus or minus; then divide and flip for the other four.

Flash cards

Say the answer out loud, then flip.

What is the principal square root?
The nonnegative root: 81 = 9, never −9.
State the Pythagorean identity.
sin2θ+cos2θ=1.
cos θ = −817 and θ is in Quadrant II. Find sin θ.
1517: sin2θ = 1 − 64289 = 225289, the root is 1517, and sine is positive in II.
sin θ = 1517 and cos θ = −817. Find tan θ.
−158.
Which decides the sign of the missing coordinate: the square root or the quadrant?
The quadrant. The square root gives only the size.
True or false: 225289 = ±1517.
False: √ alone means the positive root, 1517. The ± appears only when you solve sin2θ = 225289.