Trigonometry / Sinusoidal functions
Sinusoidal functions
All 9 lessons, in order.
The unit at a glance
- A sinusoidal function is a repeating wave
Picture a mark on the rim of a Ferris wheel.
- Amplitude measures height, not direction
Imagine a swing moving the same distance to either side of its resting place.
- Period measures the width of a repeat
Think of a repeating alarm that sounds once every eight minutes.
- Phase shift: why minus inside moves right
Picture a music player whose song starts when its counter reads 0.
- One cycle: solve the inside-input inequality
Think of a recipe that runs from its first instruction to its last.
- Midline, maximum, minimum and range
Imagine a Ferris wheel standing on a platform.
- Read all four features, including unusual signs
Think of packing four labels on a moving wheel: size, repeat time, starting position and center height.
- Build an equation from a graph
Think of rebuilding a Ferris wheel from a picture and a timing record.
- Build and check a daylight model
Think of drawing a smooth line through a year's calendar of daylight measurements.
Rules (9)
- A sinusoidal function is a repeating wave
a sine wave is written y = A sin(ωx − φ) + B, and a cosine wave is written y = A cos(ωx − φ) + B. For a nonconstant wave, A ≠ 0; use ω > 0 after rewriting signs. The inside input is in radians. Read ω as omega and φ as phi. A coefficient is a multiplier; ω is the coefficient of x. A parameter is a fixed setting such as A, ω, φ or B. T labels the period and h labels the signed horizontal shift. The subscript max means highest output and min means lowest output.
- Amplitude measures height, not direction
amplitude = |A| = . It is the distance from the midline to an extreme, not the full height. Negative A reflects the wave vertically.
- Period measures the width of a repeat
for ω > 0, T = and ω = . Use adjacent matching stages of the wave to read T from a graph. T is a positive repeat distance, and h will name a signed horizontal shift.
- Phase shift: why minus inside moves right
h = , with ω > 0. Factor ωx − φ = ω(x − h). h > 0 moves right; h < 0 moves left; h = 0 gives no horizontal shift. We name the signed horizontal slide h.
- One cycle: solve the inside-input inequality
0 ≤ ωx − φ ≤ 2π gives h ≤ x ≤ h + T, where h = and T = , provided ω > 0.
- Midline, maximum, minimum and range
midline y = B, with B = . Minimum = B − |A|; maximum = B + |A|. Range: [B − |A|, B + |A|].
- Read all four features, including unusual signs
rewrite negative inside speed first: cos(−u) = cos u; sin(−u) = −sin u. Then amplitude |A|, period , phase shift , and midline y = B.
- Build an equation from a graph
A = > 0, B = , ω = , φ = ωh. Choose h at an upward middle crossing for sine or a peak for cosine.
- Build and check a daylight model
for a fitted positive-A sine wave, A = , B = , ω = , φ = ωh. Choose h near a rising middle crossing and compare predictions with observations.
Recipes (9)
- A sinusoidal function is a repeating wave
- Name the wave as sine or cosine.
- Read the number multiplying the whole wave, A.
- Read the coefficient of x inside, ω, and match the inside to ωx − φ.
- Read the number added after the wave, B.
- Use the next lessons to translate these parameters into distances.
- Amplitude measures height, not direction
- Read A, the entire outside multiplier, including its sign.
- Use |A| for the amplitude.
- If heights are given instead, subtract minimum from maximum and divide by 2.
- Keep A's sign when drawing which part of the cycle rises or falls.
- Period measures the width of a repeat
- Read ω, the coefficient of x inside.
- Divide 2π by that positive coefficient.
- If T is given instead, divide 2π by T to find ω.
- Plug back into ωT = 2π.
- Phase shift: why minus inside moves right
- Match the entire inside input to ωx − φ, including the sign of φ.
- Set the inside input equal to 0 to locate the chosen cycle start.
- Undo the subtraction, then divide by the positive coefficient of x.
- Plug the answer back into the inside and confirm 0.
- State the distance and direction separately.
- One cycle: solve the inside-input inequality
- Write 0 ≤ the entire inside input ≤ 2π.
- Undo addition or subtraction in all three parts.
- Undo multiplication by dividing all three parts by positive ω.
- Plug both endpoints back into the inside; get 0 and 2π.
- Subtract start from end to get the period.
- Midline, maximum, minimum and range
- Find the center B from the outside addition or the average of the extremes.
- Find the positive amplitude |A|.
- Subtract the amplitude from B for the minimum.
- Add the amplitude to B for the maximum.
- Write the midline as an equation and the range as an included interval.
- Read all four features, including unusual signs
- If the x-coefficient inside is negative, factor out −1 from the whole inside.
- Use the cosine even rule or sine odd rule.
- Match A, ω, φ and B, keeping signed quantities.
- Compute each feature on its own line.
- Plug the shift into the original and rewritten inside and check the range.
- Build an equation from a graph
- Read the maximum and minimum, then find positive A and B.
- Read T between adjacent matching stages.
- Compute ω = 2π ÷ T.
- Choose sine at an upward middle crossing or cosine at a peak; read h.
- Compute φ = ωh and substitute h back into the inside.
- Check points one quarter period apart.
- Build and check a daylight model
- Define the time input and the output units.
- Draw the table and plot the observed points.
- Read the observed maximum, minimum and repeating interval.
- Choose a suitable sine crossing or cosine peak.
- Assemble the model and check several months.
- Repeat the observation pattern by T for the requested longer plot.
Traps (9)
- A sinusoidal function is a repeating wave
Do not call every periodic function sinusoidal. Repeating stair steps repeat too, but they are not sine or cosine waves.
- Amplitude measures height, not direction
Do not report maximum-minus-minimum as the amplitude. It contains two amplitude distances.
- Period measures the width of a repeat
ω is not the period. It is the multiplier that determines the period.
- Phase shift: why minus inside moves right
Do not read the phase shift as φ alone. First translate from inside units to x-units by dividing by ω.
- One cycle: solve the inside-input inequality
Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.
- Midline, maximum, minimum and range
The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.
- Read all four features, including unusual signs
The chosen cycle start is an upward crossing for positive-A sine and a peak for positive-A cosine. Negative A reverses those starting features.
- Build an equation from a graph
A graph alone does not force a unique phase shift. State which sine or cosine start you chose and check that the equation reproduces the pictured stages.
- Build and check a daylight model
Do not confuse an observed height with a model prediction. The instructor's formula approximates the table and does not exactly place every observed extreme in its recorded month.
Lesson 1 of 9
A sinusoidal function is a repeating wave
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a mark on the rim of a Ferris wheel. As the wheel turns, the mark rises, reaches the top, falls, reaches the bottom, and rises again. If you draw its height against time, you get a smooth wave.
One complete trip through that motion is a cycle. Repeating the same motion makes a Periodic function. A sinusoidal function uses sine or cosine to make this particular smooth wave.
You can change the wheel's size, how quickly it turns, when you start watching, and how high its center sits. The four numbers in a sinusoidal formula control those four features. We will learn each control separately before combining them. The three study lists appear after you have practiced these features in Lesson 7.
Explain it like I am five
Picture one seat on a Ferris wheel: up to the top, down to the bottom, up again. Its height over time draws a smooth wave. A function that repeats like this is periodic, and one full repeat is a cycle. A wave built from sine or cosine is sinusoidal (sigh-nuh-SOY-dul).
Numbers: hub (center) 20 meters up, radius 15 meters, one turn every 40 minutes, clock started as the seat passes hub height going up. Height: y = 15 sin(t) + 20, t in minutes, where = 2π ÷ 40 spreads one full turn, 2π, over 40 minutes. At t = 10, a quarter turn, the input in the parentheses is × 10 = and sin = 1, so y = 35 meters, the top. At t = 30, sine is −1 and y = 5 meters, the bottom.
The general form y = A sin(ωx − φ) + B has four dials: A the size (15), ω (omega) the speed (), φ (phi) the start (0 here) and B the hub height (20).
2 Picture it
Reminder
Reminder: Function substitution, Radians, Basic values
- Function substitution. Replace every x with the chosen input: f(x) = 2x + 1 gives f(3) = 2(3) + 1 = 7.
- Radians. A full turn is 2π radians; a quarter turn is .
- Basic values. sin 0 = 0, cos 0 = 1, and sin(−) = −1.
3 Why
On the unit circle, Sine reads vertical position and Cosine reads horizontal position. After a full turn of 2π radians, you return to the same point, so both coordinates repeat. A sinusoidal formula changes the scale and location of that repeating motion. Multiplying its output changes its height; changing its inside input changes how quickly or when it runs; adding outside changes its center. These moves preserve the smooth repeating shape.
4 The rule
a sine wave is written , and a cosine wave is written .
For a nonconstant wave, ; use after rewriting signs. The inside input is in radians. Read as omega and as phi. A coefficient is a multiplier; is the coefficient of x. A parameter is a fixed setting such as A, or B. T labels the period and h labels the signed horizontal shift. The subscript max means highest output and min means lowest output.
The same idea, five ways
A sine or cosine wave whose height and timing can change.
A sinusoidal function is a transformed sine or cosine function.
- A ≠ 0, ω > 0
- Graph words: smooth repeated peaks and troughs.
A Ferris wheel gives the same up and down trip every revolution.
The same idea, other ways
Imagine the height of a dot on a turning wheel. The same wheel position returns once per revolution.
Sine starts in the middle and rises. Positive cosine starts at a peak and falls. Both trace the same kind of motion.
Adding 2π to a basic sine or cosine input is like restarting the same music loop. It puts you at the same stage of the loop.
| Read | Feature | Formula |
|---|---|---|
| A | Amplitude: distance from middle to top | |A| = ; is the highest output; is the lowest |
| ω | Period: width of one complete repeat | |
| φ and ω | Phase shift: sideways slide | h = ; h names this horizontal distance |
| B | Midline: horizontal center line | y = B; B = |
Part 1: Sine starts in the middle
A basic sine wave begins with height 0 and rises. Its Domain, the allowed inputs, is all real numbers. Its Range, the possible outputs, is [−1, 1].
- Rule: sin 0 = 0.
- Rule: −1 ≤ sin x ≤ 1.
- Rule: sin(x + 2π) = sin x.
The same idea, five ways
Sine takes every real input and gives a height between negative one and one.
The domain is all real inputs and the range includes all outputs from −1 to 1.
- {x | x is a real number}
A wheel marker starts at center height and moves upward.
Worked example
Follow one unshifted sine cycle
The input is an angle in radians. Find the five turning and crossing heights of y = sin x in one full cycle, then see where they repeat.
Show the steps and the answer
- Read the sine table at : .Sine is the vertical coordinate on the unit circle, whose starting point has height 0.
- At ; at .A quarter turn reaches the top of the circle, and a half turn returns to height 0.
- At ; at .Three quarters of a turn reaches the bottom, and a full turn reaches the start.
- At , the output is 1 again.The extra 2π is one full turn, which returns to the same circle point before the quarter turn.
- One cycle runs from x = 0 to x = 2π.
- The heights at the five key points are shown in the table.
- The pattern then repeats.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
Part 2: Cosine starts at an extreme
A basic cosine wave starts with height 1, its maximum, and falls. It accepts every real input and stays between −1 and 1.
- Rule: cos 0 = 1.
- Rule: −1 ≤ cos x ≤ 1.
- Rule: cos(x + 2π) = cos x.
The same idea, five ways
Cosine takes every real input and gives a horizontal coordinate between negative one and one.
The domain is all real inputs and the range includes all outputs from −1 to 1.
- {x | x is a real number}
Watch the same wheel beginning at its top instead of its side.
Worked example
Follow one unshifted cosine cycle
Find the heights of y = cos x at the same five stages of a full turn. This asks where cosine begins and how it repeats.
Show the steps and the answer
- .Cosine reads the horizontal coordinate of the starting circle point (1, 0).
- and .The top of the circle has horizontal coordinate 0; the leftmost point has horizontal coordinate −1.
- and .The bottom has horizontal coordinate 0, and a full turn returns to horizontal coordinate 1.
- Cosine starts at its top height 1.
- Its cycle also has length 2π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
Part 3: Four parameters and their jobs
Use the table as a map. A and B change heights. ω and φ change the inside input, so they change timing. Do not try to memorize four disconnected facts; connect each letter to where it sits. Each fixed setting is a Parameter. A Coefficient is a multiplier, such as ω multiplying x.
- Rule: A multiplies the sine or cosine output.
- Rule: ω multiplies x inside.
- Rule: φ is the signed number subtracted inside.
- Rule: B is added outside.
A: height
ω: timing speed
φ with ω: horizontal slide
B: center height
The same idea, five ways
Four fixed numbers control the wave's size, timing, sideways slide and center height.
Use the table as a map. A and B change heights. ω and φ change the inside input, so they change timing. Do not try to memorize four disconnected facts; connect each letter to where it sits.
- Inside input: ωx − φ
- Outside: multiply by A, then add B
Set four controls on a wheel: size, turning speed, start time and center height.
A: height
ω: timing speed
φ with ω: horizontal slide
B: center height
Worked example
Identify the controls before finding distances
For y = 2 sin(2x − ) + 1, identify A, ω, φ and B. This asks for the four signed numbers in their formula positions.
Show the steps and the answer
- and .The multiplier is 2 and the outside addition is 1.
- and .Inside, 2 multiplies x and is subtracted.
- A = 2
- ω = 2
- B = 1
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Mark the parentheses before identifying the four signed numbers.
5 How
- Name the wave as sine or cosine.
- Read the number multiplying the whole wave, A.
- Read the coefficient of x inside, ω, and match the inside to ωx − φ.
- Read the number added after the wave, B.
- Use the next lessons to translate these parameters into distances.
Recognize a wave formula
- Find the sin or cos.
- Separate the outside multiplier and outside addition from the entire inside input.
- Keep the letters attached to their positions; their jobs depend on those positions.
6 Worked example
Worked example
Follow one unshifted sine cycle
The input is an angle in radians. Find the five turning and crossing heights of y = sin x in one full cycle, then see where they repeat.
Show the steps and the answer
- Read the sine table at : .Sine is the vertical coordinate on the unit circle, whose starting point has height 0.
- At ; at .A quarter turn reaches the top of the circle, and a half turn returns to height 0.
- At ; at .Three quarters of a turn reaches the bottom, and a full turn reaches the start.
- At , the output is 1 again.The extra 2π is one full turn, which returns to the same circle point before the quarter turn.
- One cycle runs from x = 0 to x = 2π.
- The heights at the five key points are shown in the table.
- The pattern then repeats.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Circle the entire inside input before identifying the four parameters.
- Memorize the two starting heights; rebuild the intermediate heights from a turn.
7 The trap
Do not call every periodic function sinusoidal. Repeating stair steps repeat too, but they are not sine or cosine waves.
Keep in mind
- Periodic is not the same as sinusoidal: a staircase pattern that repeats every 2 units is periodic, but it has sharp corners instead of a smooth wave.
- The input of sine or cosine is in radians: sin = 1, while sin 90 read as radians is about 0.894.
- An unwritten number is 1 or 0: in y = sin x, A = 1, ω = 1, φ = 0 and B = 0.
- A positive sine wave starts at its center going up, and a positive cosine wave starts at its top: sin 0 = 0 but cos 0 = 1.
Memory hook
A, ω, φ, B: size, speed, start, center. On the wheel: its radius, how fast it spins, when you start watching, and how high the hub sits.
Flash cards
Say the answer out loud, then flip.
What is a periodic function?
What is a sinusoidal function?
How do you say ω and φ?
- ω is omega (oh-MAY-guh).
- φ is phi (fie, rhymes with pie).
In y = 6 sin(2x − 1) + 9, read A, ω, φ and B.
- A = 6
- ω = 2
- φ = 1
- B = 9
A Ferris wheel's hub is 12 meters up and its radius is 10 meters. What are the highest and lowest seat heights?
- Highest: 12 + 10 = 22 meters
- Lowest: 12 − 10 = 2 meters
A traffic light repeats its colors every 60 seconds. Is it sinusoidal?
Lesson 2 of 9
Amplitude measures height, not direction
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine a swing moving the same distance to either side of its resting place. The distance from the resting place to one farthest position tells you how large the motion is. For a wave, that distance is the Amplitude. You measure from the middle to the top, or from the middle to the bottom. You do not measure all the way from bottom to top. The number A stretches or shrinks every height before anything is added outside. A negative A also turns the wave upside down. That flip changes which part comes first, but a distance cannot become negative.
Explain it like I am five
Picture a child on a swing that travels 2 meters forward and 2 meters back from its resting spot. That 2 meters is the swing's amplitude: the distance from the middle to one far end. The full 4 meters from end to end is twice the amplitude.
Take y = −6 sin x. The number multiplying the whole wave, A, is −6. Plain sine runs from −1 to 1, so multiply: when sin x = 1, y = −6 × 1 = −6, and when sin x = −1, y = −6 × (−1) = 6. The wave reaches 6 and −6, so the amplitude is |−6| = 6. The bars mean absolute value: a number's size without its sign.
Check with the heights: amplitude = = = = 6. The minus sign in A shrank nothing. It flipped the wave upside down, so it heads down first instead of up. A distance cannot be negative, which is why amplitude uses |A|.
2 Picture it
Reminder
Reminder: Absolute value, Signed multiplication, Subtracting negatives
- Absolute value. |−3| = 3 because −3 is 3 units from 0.
- Signed multiplication.
- Subtracting negatives.
3 Why
The basic sine and cosine outputs reach 1 and −1. Multiplying by A puts the two extreme outputs at A and −A before a vertical addition. Those positions are each |A| from 0. Their separation is 2|A|, so half the maximum-minus-minimum is |A|. Adding the same B to both heights leaves their difference unchanged. A negative multiplier swaps the extremes, which is why we keep the sign of A separate from the amplitude.
4 The rule
amplitude .
It is the distance from the midline to an extreme, not the full height. Negative A reflects the wave vertically.
The same idea, five ways
Amplitude is the distance from the middle of the wave to a peak.
The amplitude equals the absolute value of the outside multiplier.
- Amplitude = |A|
- |A| =
- Graph words: half the height from trough to peak.
Measure from a swing's rest position to one farthest reach.
The same idea, other ways
The amplitude marker covers only half the full bottom to top span.
Doubling a picture doubles its heights. Flipping the enlarged page does not change its size. Positive 3 and negative 3 both give amplitude 3.
Part 1: Positive A
Positive A changes the distance without reversing the heights.
- Rule: A = 2 gives amplitude 2.
The same idea, five ways
Positive A
Positive A changes the distance without reversing the heights.
- Rule: A = 2 gives amplitude 2.
Enlarge a photo to double the distance from its center to its edges.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
Part 2: Negative A
A negative multiplier changes distance and reverses which original heights point upward. This flip is a Reflection.
- Rule: A = −3 gives amplitude 3, with a vertical reflection.
The same idea, five ways
Negative A
A negative multiplier changes distance and reverses which original heights point upward.
- Rule: A = −3 gives amplitude 3, with a vertical reflection.
Turn the enlarged photo upside down; its size stays the same.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
Part 3: Amplitude from maximum and minimum
Measure the total span, then take half because the center splits it into equal distances.
- Rule: amplitude = .
The same idea, five ways
Amplitude from maximum and minimum
Measure the total span, then take half because the center splits it into equal distances.
- Rule: amplitude = .
Measure the distance from the bottom of a wheel to its top, then halve it.
Worked example
Recover amplitude from two heights
A wave has maximum 10 and minimum 2. Find its amplitude. You want the distance from the middle to either end.
Show the steps and the answer
- Total height .Subtract the lower height from the upper height to measure the entire span.
- Amplitude .The wave has equal height on both sides of its middle.
- The middle is ; and .A midpoint check independently confirms the distance.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
5 How
- Read A, the entire outside multiplier, including its sign.
- Use |A| for the amplitude.
- If heights are given instead, subtract minimum from maximum and divide by 2.
- Keep A's sign when drawing which part of the cycle rises or falls.
Find amplitude
- From an equation, use the absolute value of A.
- From a graph or data, measure the whole height and halve it.
- Check that your answer is nonnegative.
6 Worked example
Worked example
Amplitude when the outside multiplier is negative
Find A and the amplitude of y = −9 sin(x) + 2. The midline is y = 2, and one cycle runs from x = 0 to x = 4, with lowest point (1, −7) and highest point (3, 11). Confirm the amplitude from those two heights, then say whether the graph falls or rises first as it leaves (0, 2). The figure shows the midline with the five key points (0, 2), (1, −7), (2, 2), (3, 11) and (4, 2).
Show the steps and the answer
- Read the outside multiplier of : .A is the entire number multiplying the sine, sign included. The inside the sine and the + 2 added at the end are not part of it.
- Take the absolute value: amplitude .Amplitude is a distance from the midline to an extreme, and a distance cannot be negative, so the sign is dropped when measuring the size of the wave.
- Confirm with the heights. The highest point (3, 11) gives and the lowest point gives , so amplitude .Subtracting the minimum from the maximum gives the full height, 18, which is two amplitudes: one below the midline and one above. Dividing by 2 leaves one amplitude, and it matches |A|.
- Measure from the midline : up to the top is , and down to the bottom is .The amplitude runs from the midline to an extreme, not from bottom to top, so each of these distances must be 9. The full height 18 is not the amplitude.
- Bring the sign back for the shape. At , so the graph leaves (0, 2) going down to , comes back to (2, 2), climbs to (3, 11) and returns to (4, 2).With A = 9 the graph would rise first, to (1, 11). The negative A reflects the wave vertically across the midline, so the fall comes first and the rise second. Only the direction changes; the size stays 9.
Work to write
- amplitude = |A| = |−9| = 9
- = = = 9
- 11 − 2 = 9 and 2 − (−7) = 9
- A is negative, so the graph falls first from (0, 2) to (1, −7), then rises to (3, 11)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: distance drops the sign.
- If the total height is 8, the amplitude is 4.
7 The trap
Do not report maximum-minus-minimum as the amplitude. It contains two amplitude distances.
Keep in mind
- Amplitude is half the top-to-bottom distance: a wave from 2 to 8 has amplitude = 3, not 6.
- Amplitude is never negative: y = −6 sin x has amplitude 6, and its minus sign only flips the wave.
- Adding a number outside moves the wave up or down but keeps its amplitude: y = 2 sin x + 7 still has amplitude 2, swinging from 5 to 9.
- Only the number multiplying the whole wave sets the amplitude: y = sin(8x) has amplitude 1, since the 8 sits inside.
Memory hook
Amplitude is a swing's reach: middle to one end, never end to end. Take half of top minus bottom, and let the absolute value bars drop the minus sign.
Flash cards
Say the answer out loud, then flip.
What is the amplitude of a wave?
What does |A| mean?
What is the amplitude of y = − cos x?
A wave's highest value is 13 and its lowest is 5. What is its amplitude?
For y = −7 sin x, what is y at x = ?
A wave runs from −4 up to 4. Is its amplitude 8?
Lesson 3 of 9
Period measures the width of a repeat
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of a repeating alarm that sounds once every eight minutes. Eight minutes is the waiting distance from one alarm to the next. A wave's Period is the horizontal distance from one complete motion to the next. You can measure from one peak to the next peak, or from one upward middle crossing to the next upward middle crossing. Use matching stages. The number ω, called ω (omega), controls how quickly the inside input advances as x increases. A larger positive ω makes the wave finish sooner. A smaller positive ω makes it take longer. The height does not tell you this width.
Explain it like I am five
Picture a carousel horse that passes you every 30 seconds. Those 30 seconds are the period: how long one full repeat takes. On a graph the period is the horizontal width of one cycle: from a peak to the next peak, or from any point to the next point at the same height heading the same way.
Take y = sin(5x). Sine finishes a cycle when its inside, the input in the parentheses, travels one full turn, 2π. Here the inside is 5x, so set 5x = 2π and divide both sides by 5: x = ≈ 1.26 (≈ means about). The period is T = . The 5 is ω (omega), the speed: five times the speed makes one fifth the width, since plain sin x takes 2π ≈ 6.28.
Check: at x = the inside is 5 × = 2π, exactly one turn, so the wave is back where it began. Heights leave the width alone: y = 9 sin(5x) + 1 also has period . That is why T = .
2 Picture it
Reminder
Reminder: Division by a fraction, Cancel common factors, Solving an equation
- Division by a fraction.
- Cancel common factors. = because both top and bottom contain 2.
- Solving an equation. 4T = 2π becomes T = ; plugging back gives 4T = 2π.
3 Why
A sine or cosine cycle requires its inside input to advance 2π. If x advances T, then ωx advances ωT. Therefore ωT = 2π, and dividing by positive ω gives T = . The subtraction of φ cancels when you compare the two inside inputs, so sliding the graph does not change its period. Neither multiplying the heights by A nor adding B changes the horizontal distance needed for one turn. A repeat must return sine's unique top point, or cosine's unique rightmost point, to itself. The next such point is one full lap later, so no shorter positive distance repeats every output.
4 The rule
for and .
Use adjacent matching stages of the wave to read T from a graph. T is a positive repeat distance, and h will name a signed horizontal shift.
The same idea, five ways
The period is the width of one complete repeat.
The period is the least positive horizontal distance that repeats the whole nonconstant wave.
- f(x + T) = f(x) for every x
- Graph words: distance between adjacent peaks.
An alarm returns to the same stage every fixed number of minutes.
The same idea, other ways
The arrow from one peak to the next peak measures a repeat. A peak-to-trough distance measures only half a cycle.
If the inside clock advances four times as quickly, it finishes one revolution in a quarter of the usual distance.
Part 1: ω bigger than 1
The inside advances faster than x, so the horizontal cycle is shorter.
- Rule: ω = 4 gives T = .
The same idea, five ways
ω bigger than 1
The inside advances faster than x, so the horizontal cycle is shorter.
- Rule: ω = 4 gives T = .
A fast clock completes its revolution sooner.
Worked example
Four times the input runs four times as fast
Find the period of y = sin(4x). This asks how far x moves before the entire shape repeats.
Show the steps and the answer
- The inside input needs to advance by for one full sine cycle.That is one full turn.
- Set to find the horizontal distance that produces this inside change.Changing x by T changes 4x by 4T.
- Divide by 4: .Division undoes multiplication and finds the needed distance.
- Plug back: .The distance really does send the inside through exactly one turn.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
Part 2: ω between 0 and 1
The inside advances more slowly than x, so the horizontal cycle is longer.
- Rule: ω = gives T = 6π.
The same idea, five ways
ω between 0 and 1
The inside advances more slowly than x, so the horizontal cycle is longer.
- Rule: ω = gives T = 6π.
A slow clock needs more time to finish the same revolution.
Worked example
A fractional inside coefficient widens a cycle
Find the period of y = sin(). This asks how much x must grow to make the slower inside input finish a full turn.
Show the steps and the answer
- .x divided by 3 means one third times x.
- .Dividing by one third means multiplying by its reciprocal 3.
- Plug back: .An x-change of 6π sends the inside through one full turn.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
Part 3: Recovering ω from T
Choose the multiplier that makes the inside advance 2π during the given width.
- Rule: ω = .
The same idea, five ways
Recovering ω from T
Choose the multiplier that makes the inside advance 2π during the given width.
- Rule: ω = .
Choose the clock's speed so one revolution takes exactly eight minutes.
Worked example
Start with the period
A wave repeats every 8 input units. Find ω. You know the width and want the inside multiplier.
Show the steps and the answer
- Use with .The inside must make one full turn of 2π during those 8 units.
- .Divide top and bottom by 2 to keep the same fraction.
- Plug back: .This coefficient gives exactly the required inside change in 8 input units.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say what the formula changes before calculating.
5 How
- Read ω, the coefficient of x inside.
- Divide 2π by that positive coefficient.
- If T is given instead, divide 2π by T to find ω.
- Plug back into ωT = 2π.
Find period or inside coefficient
- Decide whether you are given ω or T.
- Use the reciprocal formula for the unknown.
- Require a positive distance and check ωT = 2π.
6 Worked example
Worked example
Four times the input runs four times as fast
Find the period of y = sin(4x). This asks how far x moves before the entire shape repeats.
Show the steps and the answer
- The inside input needs to advance by for one full sine cycle.That is one full turn.
- Set to find the horizontal distance that produces this inside change.Changing x by T changes 4x by 4T.
- Divide by 4: .Division undoes multiplication and finds the needed distance.
- Plug back: .The distance really does send the inside through exactly one turn.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: inside runs faster, cycle gets shorter.
- Always compare a peak with a peak, not a peak with a trough.
7 The trap
ω is not the period. It is the multiplier that determines the period.
Keep in mind
- A bigger ω means a shorter period: sin(5x) repeats every ≈ 1.26, while sin x repeats every 2π ≈ 6.28.
- A fraction for ω stretches the wave: y = cos() has ω = and period 2π ÷ = 2π × 5 = 10π.
- Measure between matching stages: neighboring peaks at x = 2 and x = 9 mean a period of 7, while peak to trough is only half a period.
- Height and slide leave the period alone: y = 9 sin(5x − 2) + 8 still has period .
Memory hook
Period = : one full turn divided by the speed. Faster spin, shorter repeat.
Flash cards
Say the answer out loud, then flip.
What is the period of a wave?
What is the period formula for y = A sin(ωx − φ) + B with ω > 0?
What is the period of y = cos(8x)?
What is the period of y = sin(x)?
A wave's period is 6. What is ω?
In y = sin(5x), is the period 5?
Lesson 4 of 9
Phase shift: why minus inside moves right
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a music player whose song starts when its counter reads 0. The outside number x is your clock, but sine or cosine listens to the counter inside the parentheses. In sin(x − 1), the counter is one behind your clock. When your clock reads 0, the counter reads −1, so the song has not reached its original start. Your clock must reach 1 before x − 1 becomes 0. That puts the original start one unit to the right. The inside offset is φ (phi). A Phase shift is this horizontal slide of the whole pattern. A plus inside makes the counter run ahead, so the start happens earlier, on the left.
Explain it like I am five
Picture your watch, x, and a movie's own counter, the inside of the parentheses. In sin(x − 2) the counter runs 2 behind your watch. The movie starts when the counter reads 0, which happens when your watch reads 2. So the whole wave starts 2 later, 2 units to the right on a graph. That sideways slide is the phase shift.
With a number in front of x, solve for the start. Take y = sin(2x − ), where ω (omega) = 2 and φ (phi) = . Set the inside to 0: 2x − = 0. Add : 2x = . Divide by 2, which doubles the bottom: x = . The wave starts to the right, and the phase shift formula h = = ÷ 2 = agrees.
Check: 2 × − = − = 0. A plus sign inside, as in sin(x + 2), makes the counter run 2 ahead, so the start comes earlier: 2 units to the left.
2 Picture it
Reminder
Reminder: Solving a linear equation, Subtracting a negative, Factoring, Fraction division
- Solving a linear equation. 2x − π = 0 becomes 2x = π and x = ; substituting gives π − π = 0.
- Subtracting a negative. x + 1 = x − (−1), so φ = −1.
- Factoring. 2(x − 1) = 2x − 2; the coefficient multiplies both terms.
- Fraction division.
3 Why
Match the old inside input u with the new one: ωx − φ = u. Adding φ and dividing by positive ω gives x = + . The unshifted wave sin(ωx) receives u at x = . Every matching point therefore moves by the same distance . Positive distance adds to every x-coordinate and moves right; negative distance subtracts and moves left. This applies to the entire curve, not only its start.
4 The rule
, with .
Factor . h > 0 moves right; h < 0 moves left; gives no horizontal shift. We name the signed horizontal slide h.
The same idea, five ways
Phase shift is how far the repeating picture slides left or right.
For positive ω, the horizontal shift equals the signed inside offset divided by the inside coefficient.
- h > 0: right; h < 0: left
- Graph words: matching stages move by h horizontally.
A delayed music counter reaches the same part of the song later.
The same idea, other ways
A counter x − 1 is one behind. To show 0 it needs x = 1. A counter x + 1 is one ahead and shows 0 at x = −1.
The old point (u, sin u) becomes (u + 1, sin u) for sin(x − 1). Its height stays the same, and its horizontal coordinate grows by 1.
2x − π = 2(x − ). The factor 2 is input speed; the subtraction from x is the horizontal slide.
The basic sine peak receives . For sin(x − 1), x = + 1 gives that same inside input, so even the peak moves right 1.
Part 1: Minus inside
Subtracting a positive number makes the inside counter lag behind. The graph reaches every original stage later.
- Rule: sin(x − 1) is sin x moved right 1.
The same idea, five ways
Minus inside
Subtracting a positive number makes the inside counter lag behind. The graph reaches every original stage later.
- Rule: sin(x − 1) is sin x moved right 1.
A clock running one minute behind reaches the start one minute later.
Worked example
Subtract 1 inside
Compare sin(x − 1) with sin x. Find where the original inside input 0 now happens. This asks where the original starting point moves.
Show the steps and the answer
- The basic sine has inside input 0 at .Its starting height is sin 0 = 0.
- Set to find where the shifted formula receives that same inside input.Matching the inside input matches the stage of the sine motion.
- Add 1 to both sides: .Adding undoes subtraction and locates the shifted starting point.
- Plug back: .The new input 1 does feed the original sine input 0.
- For any old input u, choose ; then .This shows every point moves right 1, not only the starting point.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Make x − 1 equal to 0: x = 1, which is right.
Part 2: Plus inside
Adding a positive number makes the inside counter run ahead. It reaches the original start when x is negative.
- Rule: sin(x + 1) is sin x moved left 1.
The same idea, five ways
Plus inside
Adding a positive number makes the inside counter run ahead. It reaches the original start when x is negative.
- Rule: sin(x + 1) is sin x moved left 1.
A clock running one minute ahead reaches the start one minute earlier.
Worked example
Add 1 inside
For sin(x + 1), locate the same original inside input 0. This asks whether its starting point moves left or right.
Show the steps and the answer
- Set .You are finding the x that makes sine receive its original start input.
- Subtract 1: .The x must be negative to cancel the added 1.
- Plug back: .The shifted formula is at the original sine start there.
- Rewrite .This identifies φ = −1 and h = −1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Set x + 1 = 0; x = −1, and −1 + 1 = 0.
Part 3: φ versus horizontal distance
φ measures the offset in the inside input. Dividing by ω translates that offset into units along the x-axis.
- Rule: cos(πx + 2) has φ = −2 and h = −.
The same idea, five ways
φ versus horizontal distance
φ measures the offset in the inside input. Dividing by ω translates that offset into units along the x-axis.
- Rule: cos(πx + 2) has φ = −2 and h = −.
Convert an offset on a fast clock into elapsed minutes on your own clock.
Worked example
Keep φ and h separate
Find the signed offset and shift in cos(πx + 2). You are reading an inside number and converting it to a horizontal distance.
Show the steps and the answer
- , so and .This matches subtraction of a signed constant.
- Set , giving and .Solving locates the original cosine start.
- Plug back: .The proposed horizontal shift feeds cosine 0.
- Shift = left
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Divide φ by ω to get h = −.
5 How
- Match the entire inside input to ωx − φ, including the sign of φ.
- Set the inside input equal to 0 to locate the chosen cycle start.
- Undo the subtraction, then divide by the positive coefficient of x.
- Plug the answer back into the inside and confirm 0.
- State the distance and direction separately.
Find a phase shift without guessing its direction
- Rewrite a plus inside as subtraction of a negative.
- Find the x that makes the entire inside input 0.
- Substitute that x back.
- Read positive x-distance as right and negative as left.
6 Worked example
Worked example
Subtract 1 inside
Compare sin(x − 1) with sin x. Find where the original inside input 0 now happens. This asks where the original starting point moves.
Show the steps and the answer
- The basic sine has inside input 0 at .Its starting height is sin 0 = 0.
- Set to find where the shifted formula receives that same inside input.Matching the inside input matches the stage of the sine motion.
- Add 1 to both sides: .Adding undoes subtraction and locates the shifted starting point.
- Plug back: .The new input 1 does feed the original sine input 0.
- For any old input u, choose ; then .This shows every point moves right 1, not only the starting point.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
Subtract 1 inside
Compare sin(x − 1) with sin x. Find where the original inside input 0 now happens. This asks where the original starting point moves.
Show the steps and the answer
- The basic sine has inside input 0 at .Its starting height is sin 0 = 0.
- Set to find where the shifted formula receives that same inside input.Matching the inside input matches the stage of the sine motion.
- Add 1 to both sides: .Adding undoes subtraction and locates the shifted starting point.
- Plug back: .The new input 1 does feed the original sine input 0.
- For any old input u, choose ; then .This shows every point moves right 1, not only the starting point.
Rung 2 of 5
Add 1 inside
For sin(x + 1), locate the same original inside input 0. This asks whether its starting point moves left or right.
Show the steps and the answer
- Set .You are finding the x that makes sine receive its original start input.
- Subtract 1: .The x must be negative to cancel the added 1.
- Plug back: .The shifted formula is at the original sine start there.
- Rewrite .This identifies φ = −1 and h = −1.
Rung 3 of 5
Divide the inside subtraction by its speed
Find the phase shift of sin(2x − π). This asks how much the graph slides relative to sin(2x).
Show the steps and the answer
- Match to : and .The subtracted number is not yet the x-distance.
- Set to locate the selected cycle start.The sine receives inside input 0 at that horizontal position.
- Add : . Divide by 2: .You undo the subtraction and then the input multiplier.
- Plug back: .The proposed x gives the intended inside input.
- Factor: .The form x − h displays the horizontal distance h.
Rung 4 of 5
Cosine with a plus inside
Find the phase shift of 6 cos(2x + ). This asks where the cosine's inside input 0 now occurs, regardless of its height 6.
Show the steps and the answer
- , so .Standard form subtracts the signed number φ.
- .The horizontal distance is φ divided by ω = 2.
- Plug back: .The proposed start is where cosine receives 0 and gives its peak.
- Factor the input as .The factored expression confirms the negative horizontal shift.
Rung 5 of 5
Fractional input speed
Find the phase shift of sin( − ). You want the x-distance needed to make the inside input 0.
Show the steps and the answer
- and .The term is one third times x.
- Set , so .This finds the selected cycle start by undoing the inside subtraction.
- Multiply by 3: .The inside travels only a third as far as x, so x must travel three times the inside offset.
- Plug back: .The start really does make the inside input 0.
- Factor .Distributing one third gives − , so the x-distance is visible.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: inside works backward. Explain it by making the inside 0.
- Draw a small arrow from 0 to h on the x-axis after solving.
- A cycle start is a chosen reference stage of a repeating wave. The graph also exists to its left. In sin(x − 1), h = 1 starts the chosen cycle; x = 0 still gives the valid output sin(−1).
7 The trap
Do not read the phase shift as φ alone. First translate from inside units to x-units by dividing by ω.
Keep in mind
- Minus inside moves right and plus inside moves left: sin(x − 2) starts at x = 2, and sin(x + 2) starts at x = −2.
- Divide by ω before you read the shift: in sin(2x − ) the shift is , not .
- Plug the start back into the inside to check that it gives 0: 2 × − = 0.
- A phase shift slides the whole wave, so the period and the amplitude stay put: sin(2x − ) still has period π and amplitude 1.
Memory hook
Inside is opposite: minus moves right, plus moves left. Set the inside equal to 0 and solve: that x is where the wave starts.
Flash cards
Say the answer out loud, then flip.
What is a phase shift?
Which way and how far is y = cos(x − 6) shifted?
What is the phase shift of y = cos(6x − 3)?
What is the phase shift of y = sin(2x + π)?
Why is the shift and not φ?
Is y = sin(x + 4) shifted 4 to the right?
Lesson 5 of 9
One cycle: solve the inside-input inequality
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of a recipe that runs from its first instruction to its last. Your clock and the recipe's progress need not use the same numbers. You must find when your clock makes the progress counter read the beginning, and when it makes the counter read the end. A sine or cosine cycle runs through inside inputs from 0 to 2π. A three-part inequality keeps that whole inside trip between its two endpoints. Undoing the operations finds the corresponding x-interval. Its left endpoint is the selected cycle start. Its length is the period. This method finds both without relying on a memorized sign trick.
Explain it like I am five
Picture a recipe with its own step counter, the inside of the parentheses, running from 0 to 2π while your kitchen clock reads x. One cycle is the stretch of clock time that walks the counter from 0 all the way to 2π. The three-part inequality 0 ≤ inside ≤ 2π, read "the inside is at least 0 and at most 2π", holds that whole trip in one line.
Take y = sin(2x − ). Write 0 ≤ 2x − ≤ 2π. Add to all three parts: ≤ 2x ≤ 2π + . Match bottoms to add: 2π = , so the right end is . Divide all three parts by 2, a positive number, so the ≤ signs stay: ≤ x ≤ .
The left end, , is the phase shift. The width, − = = π, is the period, matching = = π. Check both ends in the inside: 2 × − = 0, and 2 × − = − = 2π.
2 Picture it
Reminder
Reminder: Three-part inequality, Common denominators, Interval notation, Horizontal distance
- Three-part inequality. 0 ≤ 2x − π ≤ 2π becomes π ≤ 2x ≤ 3π after adding π everywhere.
- Common denominators.
- Interval notation. [0, π] means 0 ≤ x ≤ π; square brackets include both endpoints.
- Horizontal distance. From 2 to 5 the distance is 5 − 2 = 3.
3 Why
The inequality 0 ≤ ωx − φ ≤ 2π covers one full inside turn. Adding φ everywhere gives φ ≤ ωx ≤ φ + 2π. Dividing by positive ω gives h ≤ x ≤ h + T. Subtracting the endpoints cancels h, leaving T = . Sine and cosine both repeat after that full turn. Dividing T into four equal steps gives the Quarter period ; each step advances the inside by and connects the five familiar cycle stages.
4 The rule
gives , where and , provided .
The same idea, five ways
Find the horizontal interval that makes the inside do one full turn.
A selected cycle begins at h and ends at h + T.
- h ≤ x ≤ h + T
- [h, h + T]
Find when the recipe's counter reaches its first and last instruction.
The same idea, other ways
The inside travels one lap from 0 to 2π. The interval asks which horizontal inputs make that happen.
The inequality is a window containing one cycle. Sliding the window changes its position; stretching its width changes the period.
5 How
- Write 0 ≤ the entire inside input ≤ 2π.
- Undo addition or subtraction in all three parts.
- Undo multiplication by dividing all three parts by positive ω.
- Plug both endpoints back into the inside; get 0 and 2π.
- Subtract start from end to get the period.
Find cycle endpoints
- Choose inside endpoints 0 and 2π.
- Treat the three-part inequality as two inequalities joined together.
- Perform the same undoing step on all three parts.
- Check both boundaries by substitution and subtract them.
6 Worked example
Worked example
The basic cycle
Find one cycle interval of y = sin x using the inside input from 0 to 2π. This asks for the horizontal beginning and end.
Show the steps and the answer
- The inside is x, so .The base sine completes one turn as its inside moves through that interval.
- The selected start is and end is .These inputs send the inside to its required endpoints.
- Plug back: at the inside is 0; at the inside is .Both endpoints match the desired stages.
- Length .A horizontal distance is right endpoint minus left endpoint.
- One cycle: [0, 2π]
- Phase shift = 0
- Period = 2π
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
The basic cycle
Find one cycle interval of y = sin x using the inside input from 0 to 2π. This asks for the horizontal beginning and end.
Show the steps and the answer
- The inside is x, so .The base sine completes one turn as its inside moves through that interval.
- The selected start is and end is .These inputs send the inside to its required endpoints.
- Plug back: at the inside is 0; at the inside is .Both endpoints match the desired stages.
- Length .A horizontal distance is right endpoint minus left endpoint.
- One cycle: [0, 2π]
- Phase shift = 0
- Period = 2π
Rung 2 of 4
Speed up the inside
Find one cycle interval of sin(2x). Find the two x-values that make the inside run from 0 to 2π.
Show the steps and the answer
- Write .This restricts the inside input to one full turn.
- Divide all three parts by positive 2: .Positive division preserves their order.
- Plug back: and .The endpoints produce a full inside cycle.
- Length .Subtracting endpoints measures the width.
- One cycle: [0, π]
- Period = π
Rung 3 of 4
Speed and shift together: one cycle of y = sin(2x − )
Solve the inside-input inequality to find the x-interval that holds exactly one cycle of y = sin(2x − ). Check both endpoints in the inside input, then find the period. The figure graphs the inside input u = 2x − against x. It is a line with slope 2 that crosses the vertical axis at u = −.
Show the steps and the answer
- Write the entire inside input between 0 and 2π: .A basic sine cycle runs while its input climbs from 0 to 2π. Here the input of sine is the whole expression 2x − , so that whole expression, not just x, must run from 0 to 2π.
- Add to all three parts: . Since , the right side is . So .Subtracting was the last thing done to x, so it is undone first by adding . Adding the same number to every part keeps the double inequality true.
- Divide all three parts by 2. divided by 2 is , and divided by 2 is . So .x is multiplied by ω = 2, and dividing by a positive number keeps both inequality signs pointing the same way. The speed also divides the shift, so the cycle starts at , not at .
- Plug both endpoints back into the inside: , and .The start of the cycle must make the inside input 0 and the end must make it 2π. Getting exactly 0 and 2π confirms that the interval is one full cycle.
- Subtract start from end: . The period is .The period is the horizontal length of one cycle, and this cycle runs from x = to x = .
- One cycle: ≤ x ≤
- period π.
Work to write
- 2· − = 0 and 2· − = 2π
- Period = − = π
Rung 4 of 4
One cycle with a fractional coefficient: y = cos(x − )
For y = cos(x − ), solve the inside-input inequality to find the x-interval that holds exactly one cycle. Plug both endpoints back into the inside input, then find the period. The figure graphs the inside input u = x − against x.
Show the steps and the answer
- Write .Cosine completes one cycle as its input runs from 0 to 2π. The input here is the entire expression x − , not x alone.
- Add to all three parts: . Since , the right side is , so .Subtracting was the last thing done to x, so it is undone first. Adding the same amount to all three parts keeps the inequality true.
- Divide all three parts by by multiplying by its reciprocal : and . So .Dividing by a fraction is the same as multiplying by its reciprocal. Because ω = is positive, the inequality signs keep their direction. The usual slip is to multiply by instead, and the endpoint check in the next step would catch it.
- Plug both endpoints into the inside. At : . At : .The start of the cycle must make the inside 0 and the end must make it 2π. Getting exactly those two values confirms the solving.
- Subtract start from end: .The width of the interval that holds exactly one cycle is the period. It agrees with T = = 2π · = 3π.
Work to write
- Multiply all three parts by : ≤ x ≤
- · − = 0 and · − = 2π
- Period = − = 3π
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write three copies of each addition or division mentally, one for each part.
- A and B never enter the horizontal cycle inequality.
- We select this one cycle to organize the calculation. The wave keeps repeating on both sides of the interval.
7 The trap
Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.
Keep in mind
- Do the same move to all three parts: adding to 0, to the middle and to 2π keeps the inequality true.
- Match bottoms before adding fractions with π: 2π + = + = .
- Dividing every part by a positive number keeps the ≤ signs, but dividing by a negative flips them: −2x ≤ 6 becomes x ≥ −3.
- Equal heights do not prove a full cycle: sin x is 0 at both x = 0 and x = π, yet π is only halfway, where the wave heads down instead of up.
Memory hook
Sandwich the inside: 0 ≤ inside ≤ 2π. Undo the minus, then the multiply, in all three parts. Left end = phase shift, width = period.
Flash cards
Say the answer out loud, then flip.
What does 1 ≤ x ≤ 4 mean?
What must the inside do during one cycle of sine or cosine?
Find one cycle of y = sin(x − ).
Find one cycle of y = cos(2x + π), then its period and phase shift.
- 0 ≤ 2x + π ≤ 2π
- Period: π
- Phase shift: to the left
When do the ≤ signs flip?
One cycle of y = sin(2x − ) runs from to . Is the period ?
Lesson 6 of 9
Midline, maximum, minimum and range
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine a Ferris wheel standing on a platform. Raising the platform raises its top, bottom and center by the same amount. It does not make the wheel bigger. The outside addition B does that to a wave. Its center becomes the Midline, a Horizontal line written y = B. The Maximum is the highest output; the Minimum is the lowest. A Peak is a highest point and a Trough is a lowest point. The Range lists every output height the wave reaches. Start at the center and move one amplitude up or down to find its limits. Square brackets mean the limiting heights are included.
Explain it like I am five
Picture a Ferris wheel on a platform. Raise the platform 7 meters and the top, the bottom and the hub all rise 7 meters, but the wheel is no bigger. The number B added outside does that to a wave: its center line becomes the midline, the flat line y = B, every point of it at height B.
Take y = 4 sin x + 7. B = 7, so the midline is y = 7. The amplitude is |4| = 4. Go 4 up from the center for the maximum, the highest output: 7 + 4 = 11. Go 4 down for the minimum, the lowest output: 7 − 4 = 3. The range, every height the wave reaches, is [3, 11], where square brackets mean 3 and 11 are included.
Check both formulas: the average, = 7, gives the midline, and half the gap, = 4, gives the amplitude. The domain, the inputs you may feed in, is still every real number x. Only the outputs are fenced in.
2 Picture it
Reminder
Reminder: Average, Absolute value, Interval notation, Substitution
- Average. The average of 10 and 2 is (10 + 2) ÷ 2 = 6.
- Absolute value. |−3| = 3; use 3 for both vertical distances.
- Interval notation. [−2, 4] means −2 ≤ y ≤ 4, with both endpoints included.
- Substitution. sin() = 1, so −3 sin() + 1 = −2.
3 Why
The original sine or cosine stays between −1 and 1. After multiplying, the heights lie between −|A| and |A|, regardless of reflection. Adding B makes the extremes B − |A| and B + |A|. Their average is B because the equal positive and negative distances cancel. Their half-difference is |A| because B cancels. This proves both the midline and amplitude formulas and explains why they measure different features. Sine's coordinate is positive for half a circle turn and negative for the other half; cosine has equal positive and negative halves too. Constant inside speed makes these equal horizontal lengths above and below B.
4 The rule
midline , with .
Minimum ; maximum . Range: .
The same idea, five ways
The midline is the horizontal line through the wave's center; the range is every height it reaches.
The wave is centered at height B and reaches one amplitude above and below.
- Midline: y = B
- B =
- Graph words: center line and vertical shadow.
Raising a Ferris wheel's platform raises its center and both extremes together.
The same idea, other ways
A wheel's center height and size are separate. The midline sets the center, and amplitude sets how far the top and bottom sit from it.
Add the extremes: (B + |A|) + (B − |A|) = 2B. Divide by 2 and the equal distances disappear.
A top at 10 and bottom at 2 center on 6. They are both 4 away, so midline y = 6 and amplitude 4.
Part 1: Vertical shift and midline
A Vertical shift changes every output by the same added amount. A horizontal line y = B has the same height for every input. Here y(x) means the wave's height at input x; it does not mean y times x.
- Rule: adding B outside moves every height by B.
- Rule: the midline equation is y = B.
- Rule: in a nonconstant sinusoidal wave, half the horizontal length of each complete cycle is above the midline and half is below it, apart from the crossing points.
The same idea, five ways
Vertical shift and midline
A Vertical shift changes every output by the same added amount. A horizontal line y = B has the same height for every input. Here y(x) names the wave's output height at input x; y(x + ) names its output half a period later.
- Rule: adding B outside moves every height by B.
- Rule: the midline equation is y = B.
Lift the whole Ferris wheel on a platform without making it larger.
Worked example
Add outside to lift every height
Compare y = sin x with y = sin x + 2. Find the new middle and two extreme heights.
Show the steps and the answer
- Add 2 to the original middle 0: new middle .An outside addition changes every output by the same amount.
- Add 2 to the original minimum and maximum 1: new extremes are 1 and 3.The whole graph slides upward without changing distances.
- The midline is and amplitude remains 1.Each extreme is still 1 away from the center.
- Midline: y = 2
- Minimum = 1
- Maximum = 3
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- sin x + 2 has midline y = 2 and amplitude 1.
Part 2: Upper and lower endpoints
The Range is the vertical shadow of the wave. Interval notation [a, b] includes every height from a through b. Set notation {y | a ≤ y ≤ b} says the same thing: all y satisfying the condition after the bar.
- Rule: range [B − |A|, B + |A|].
The same idea, five ways
Upper and lower endpoints
The range is the vertical shadow of the wave. Interval [a, b] includes every height from a through b. Set notation {y | a ≤ y ≤ b} says the same thing: all y satisfying the condition after the bar.
- Rule: range [B − |A|, B + |A|].
The wheel reaches every height between its lowest and highest rim points.
Worked example
A reflected wave above a new center
Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.
Show the steps and the answer
- , so the midline is .The outside addition raises every height by 1.
- .The negative multiplier reflects the wave, but the distance is positive.
- Minimum .Move 3 below the center.
- Maximum .Move 3 above the center.
- The range is , including both endpoints.The sine wave passes continuously through every height between its attained extremes.
- Midline: y = 1
- Range: [−2, 4]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use |A| so the lower height comes first.
Part 3: Read height and center together
Subtract the extremes to find size. Add the extremes to find center. The two computations answer different questions.
- Rule: amplitude = .
- Rule: B = .
The same idea, five ways
Read height and center together
Subtract the extremes to find size. Add the extremes to find center. The two computations answer different questions.
- Rule: amplitude = .
- Rule: B = .
Find the center and radius of a wheel from its top and bottom heights.
Worked example
Find the center between two extremes
A wave has maximum 10 and minimum 2. Find its midline and amplitude. You want the middle height and the equal distance on each side.
Show the steps and the answer
- .The average of the two extremes locates the middle height.
- Amplitude .Half their separation is the distance on one side.
- Write the midline as .A line equation says every point on that horizontal line has height 6.
- Check and .Adding and subtracting the distance rebuilds the original extremes.
- Midline: y = 6
- Amplitude = 4
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The midpoint is 6, and the amplitude is 4.
5 How
- Find the center B from the outside addition or the average of the extremes.
- Find the positive amplitude |A|.
- Subtract the amplitude from B for the minimum.
- Add the amplitude to B for the maximum.
- Write the midline as an equation and the range as an included interval.
Recover heights and center
- From an equation, read B and |A|.
- From two extremes, average them for B and halve their difference for |A|.
- Use B ± |A| to rebuild the extremes.
- Keep the horizontal period separate from these vertical measurements.
6 Worked example
Worked example
A reflected wave above a new center
Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.
Show the steps and the answer
- , so the midline is .The outside addition raises every height by 1.
- .The negative multiplier reflects the wave, but the distance is positive.
- Minimum .Move 3 below the center.
- Maximum .Move 3 above the center.
- The range is , including both endpoints.The sine wave passes continuously through every height between its attained extremes.
- Midline: y = 1
- Range: [−2, 4]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: center uses the sum, size uses the difference.
- Check that the midpoint of your range equals B.
7 The trap
The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.
Keep in mind
- The midline is a line, so write it as an equation: y = 7, not 7.
- The midline is the average of the maximum and the minimum: a wave from −1 to 9 has midline y = = 4.
- A negative A flips the wave, but the range still uses |A|: y = −4 sin x + 7 also has range [3, 11].
- The range is the outputs and the domain is the inputs: y = 4 sin x + 7 accepts every real x, yet its outputs stay in [3, 11].
Memory hook
Center plus or minus reach: range = [B − |A|, B + |A|]. The average of top and bottom gives the midline, and half their gap gives the amplitude.
Flash cards
Say the answer out loud, then flip.
What is the midline?
What is the range of a function?
Find the midline and range of y = 9 cos x + 1.
- Midline: y = 1
- Range: [−8, 10]
A wave peaks at 10 and bottoms out at −2. Find its midline and amplitude.
- Midline: y = = 4
- Amplitude: = 6
What is the range of y = −8 sin x + 6?
Is the range of y = 4 sin x + 7 all real numbers?
Lesson 7 of 9
Read all four features, including unusual signs
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of packing four labels on a moving wheel: size, repeat time, starting position and center height. A formula can hide those labels with a plus sign, a fraction, or a negative inside multiplier. You can unpack it in the same order every time. First make the inside multiplier positive. Then match the standard form without guessing from a single sign. A negative outside number makes the picture flip; it does not change the size distance. A plus inside means the subtracted offset is negative. Fractions need the same division rule you already practiced. Each label has its own calculation, so keep four separate answer lines.
Explain it like I am five
Think of a shipping label with four boxes: size, repeat width, start and center height. Some formulas hide the boxes behind a minus sign or a plus sign inside. Tidy the formula first, then fill each box on its own line.
Take y = 4 sin(−2x + ) − 1. The inside speed is −2, a negative, so pull out a −1: −2x + = −(2x − ), which multiplies back to the original. Sine is an odd function: sin(−u) = −sin u for any inside u, so the minus comes out front: y = −4 sin(2x − ) − 1. Now read: amplitude |−4| = 4, period = π, phase shift ÷ 2 = to the right, midline y = −1.
Why the rule: on the unit circle, running an angle backward mirrors its point across the x-axis. Cosine reads left-right position, which the mirror keeps, so cosine is an even function: cos(−u) = cos u, and an inside minus disappears. Sine reads up-down position, which the mirror flips, so its minus comes out front.
2 Picture it
Reminder
Reminder: Factoring a negative, Even and odd, Fraction division, Inside plus sign, Range from center, Quarter period
- Factoring a negative. −4x + π = −(4x − π), since −1 multiplies both terms.
- Even and odd.
- Fraction division.
- Inside plus sign. πx + 2 = πx − (−2), so φ = −2.
- Range from center. B = −3 and |A| = 5 give [−8, 2].
- Quarter period. One quarter of a full cycle has width . It advances the inside by . For T = 6π, the quarter period is .
3 Why
Changing −u to u affects sine and cosine differently. Cosine reads horizontal circle position, which stays the same when an angle reverses. Thus cos(−u) = cos u. Sine reads vertical position, which reverses, so sin(−u) = −sin u. Rewriting a negative inside coefficient therefore leaves A unchanged for cosine but changes its sign for sine. After this rewrite ω is positive, and the previously derived period, shift and cycle formulas apply directly.
4 The rule
rewrite negative inside speed first: ; .
Then amplitude |A|, period , phase shift , and midline .
The same idea, five ways
Read size, repeat width, sideways slide and center from a sine or cosine formula.
Normalize the inside sign before using the four-feature formulas.
Unpack four labels in the same order each time.
The same idea, other ways
Opposite circle rotations keep the same horizontal position but reverse vertical position. That is why cosine keeps its value and sine changes sign.
Do not improvise the order. Positive inside speed first, then signed parameters, then distances, then substitution.
Part 1: Standard sine
Read the four parameters directly, then turn them into distances.
- Rule: 3 sin(2x − π) − 4 has A = 3, ω = 2, φ = π, B = −4.
The same idea, five ways
Standard sine
Read the four parameters directly, then turn them into distances.
- Rule: 3 sin(2x − π) − 4 has A = 3, ω = 2, φ = π, B = −4.
Unpack four labeled controls before switching the ride on.
Worked example
Standard sine: all four features when the inside has a + sign
Find the amplitude, period, phase shift and midline of y = 7 sin(x + ) + 1. Say which way the graph is shifted, then check the shift and the range. The figure shows the midline of the finished graph with the five key points of one cycle marked, for checking your answer.
Show the steps and the answer
- Check the sign of the x-coefficient inside the sine. It is , which is positive, so there is no to factor out. The inside stays .The rewrite is only needed when the x-coefficient is negative. Checking first means every feature can be read straight from this inside.
- No even or odd rule is used, so the rewritten form is the same as the original: , and the 7 stays positive.sin(−u) = −sin u and cos(−u) = cos u only apply after a −1 has been pulled out of the inside. Nothing was pulled out here, so A does not change sign.
- Write the inside in the form : . Matching gives .φ is the number subtracted inside, so a + sign makes φ negative. Keeping that sign is what makes point the right way.
- Amplitude .Amplitude is the distance from the midline to a peak, and a distance is never negative.
- Period .A sine wave repeats when its inside grows by 2π. The inside grows by for each 1 unit of x, so a full cycle takes 24 units.
- Phase shift . The value is negative, so the graph is shifted 5 units to the left.Factoring out ω gives x + = (x + 5), so the cycle that normally starts at x = 0 now starts at x = −5. A + sign inside means a shift left, not right.
- Midline: .B is added outside the sine, so it lifts the whole graph 1 unit. The wave swings equally above and below y = 1.
- Put the shift into the inside: , so . The original and rewritten insides are the same expression, so this one substitution checks both.The phase shift is the x-value where the inside equals 0. That is where a sine cycle starts, on its midline.
- Range: sin takes every value from to 1, so y runs from up to . The range is .The graph reaches one amplitude above and one amplitude below the midline: the maximum is B + |A| and the minimum is B − |A|.
Work to write
- Inside x-coefficient is positive: no −1 to factor, no even or odd rule
- Amplitude = |7| = 7
- Period = 2π ÷ = 2π · = 24
- Phase shift = − ÷ = −5, so 5 units to the left
- Midline: y = 1
- Check: (−5) + = 0, so y = 7 sin 0 + 1 = 1
- Range: 1 − 7 = −6 to 1 + 7 = 8, so −6 ≤ y ≤ 8
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Keep B = −4.
Part 2: Plus inside and negative A
The minus outside reflects heights. The plus inside chooses a negative signed φ. They are separate jobs.
- Rule: πx + 2 = πx − (−2).
The same idea, five ways
Plus inside and negative A
The minus outside reflects heights. The plus inside chooses a negative signed φ. They are separate jobs.
- Rule: πx + 2 = πx − (−2).
A height flip and a timetable slide are two separate wheel adjustments.
Worked example
Plus inside, negative speed: a sine that flips and shifts right
Find the amplitude, period, phase shift and midline of y = 6 sin(−x + ) − 3. Say which way the graph is shifted. Then check the shift in both the original and the rewritten inside, and check the range. The figure shows the midline of the finished graph and the five key points of one cycle. The solution works out the coordinates of each point.
Show the steps and the answer
- The x-coefficient inside is , which is negative. Factor out of the whole inside: .The four features are read from a positive speed ω. Taking −1 out of both terms keeps the inside equal to what it was, and the + becomes − inside the brackets. Writing −(x + ) would change the function.
- Use the sine odd rule with : .Sine is odd, so the minus sign comes out of the sine and multiplies the 6. It does not reach the − 3, which is added after the sine is taken. A cosine would absorb the minus with no change of sign, but a sine does not.
- Match to : .The signs carry meaning. A = −6 says the graph is flipped over its midline. φ is the amount subtracted from ωx, so a positive means a shift to the right.
- Amplitude .Amplitude is the distance from the midline to a peak, so it is never negative. The minus sign in A only flips the graph.
- Period .One full cycle is done when the inside has grown by 2π, and the inside grows by for each unit of x.
- Phase shift . It is positive, so the graph is shifted 8 units to the right: .The cycle starts where the rewritten inside is 0, and (x − 8) = 0 at x = 8. The plus sign in the original inside does not mean a shift left. Once the negative speed is factored out, is subtracted.
- Midline: .The − 3 is outside the sine, so neither factoring the inside nor the odd rule changes it.
- Plug the shift into both insides. Original: . Rewritten: .Both forms must start the cycle at the same x. Both insides are 0, so y = 6 sin 0 − 3 = −3 and y = −6 sin 0 − 3 = −3. The cycle starts on the midline at (8, −3).
- Range: from up to , so .The graph swings one amplitude below the midline and one amplitude above it.
- Mark the key points a quarter period apart, starting at . A quarter period is . The points are , (23, 3), .Because A = −6, the graph leaves the midline going down. The minimum −9 comes first and the maximum 3 comes third. These are the points in the figure.
- Amplitude 6
- period 20
- phase shift 8, so the graph is shifted 8 units to the right
- midline y = −3. The rewritten form is y = −6 sin((x − 8)) − 3, so the graph is also flipped over its midline. The range is −9 ≤ y ≤ 3.
Work to write
- Amplitude = |−6| = 6
- Period = 2π ÷ = 20
- Phase shift = ÷ = 8, so the graph is shifted 8 units right
- Midline: y = −3
- x = 8: −(8) + = 0 and (8) − = 0
- Range: −3 − 6 ≤ y ≤ −3 + 6, so −9 ≤ y ≤ 3
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use to find the horizontal shift.
Part 3: Fractions inside
The expression is one third times x, so the coefficient of x is . Divide both the full-turn angle and the inside offset by one third.
- Rule: dividing by multiplies by 3.
The same idea, five ways
Fractions inside
The expression is one third times x, so the coefficient of x is . Divide both the full-turn angle and the inside offset by one third.
- Rule: dividing by multiplies by 3.
The wheel's internal clock runs at one third of your clock's speed.
Worked example
Two minus signs that cancel: a sine with fractions inside
Find the amplitude, period, phase shift and midline of y = −8 sin(−x − ) + 5. Say which way the graph is shifted. Then check the shift in both the original and the rewritten inside, and check the range. The figure shows the midline y = 5 of the finished graph with the five key points of one cycle: (−, 5), (−1, 13), (, 5), (2, −3) and (, 5).
Show the steps and the answer
- The x-coefficient inside is , which is negative, so factor out of the whole inside: .The rules cos(−u) = cos u and sin(−u) = −sin u only apply once the inside is written as −u. Factoring −1 out of both terms flips both signs, so − becomes +. Leaving it as − is the usual slip, and it would send the shift the wrong way.
- Use the sine odd rule with : .This is a sine, so the odd rule applies, not the cosine even rule: sin(−u) = −sin u. The new minus sign multiplies the −8 already in front, and (−8)·(−1) = 8. The two minus signs cancel, so the graph is not reflected.
- Match with : .The form subtracts φ, and x + = x − (−), so φ is negative. Keeping that sign is what gives the direction of the shift.
- Amplitude .Amplitude is the distance from the midline to a peak, so it is never negative. The original −8 has the same size, |−8| = 8. The rewrite changes only the sign, not the amplitude.
- Period .Dividing by the fraction means multiplying by its reciprocal . The π cancels, leaving 2 · 3 = 6.
- Phase shift . The graph is shifted units to the left.Multiply by the reciprocal of ω, cancel π, and reduce by dividing top and bottom by 3. A negative phase shift means a shift to the left.
- Midline: .The constant added outside the sine raises the whole graph 5 units, so the graph is centered on the horizontal line y = 5.
- Check the shift by putting into both insides. Original: . Rewritten: .A cycle of the rewritten sine starts where its inside is 0. The original inside is the negative of the rewritten one, so it must be 0 at the same x. Both are 0 at x = −, which confirms the shift of units to the left.
- Check the range: , so , that is . These values match the minimum and the maximum in the figure.The sine of anything lies between −1 and 1. So 8 sin(...) lies between −8 and 8, and adding 5 moves those bounds to −3 and 13.
Work to write
- sin(−u) = −sin u, so y = −8·(−sin(x + )) + 5 = 8 sin(x + ) + 5
- Amplitude = |8| = 8
- Period = 2π ÷ = 2π · = 6
- Phase shift = − ÷ = − · = −, so units to the left
- Midline: y = 5
- x = −: original inside −·(−) − = 0; rewritten inside ·(−) + = 0
- Range: 5 − 8 ≤ y ≤ 5 + 8, so −3 ≤ y ≤ 13
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- T = 6π.
Part 4: Negative ω in cosine
Cosine's Even function property lets you reverse the entire inside without changing the output.
- Rule: 5 cos(−4x + π) − 3 = 5 cos(4x − π) − 3.
The same idea, five ways
Negative ω in cosine
Cosine's Even function property lets you reverse the entire inside without changing the output.
- Rule: 5 cos(−4x + π) − 3 = 5 cos(4x − π) − 3.
Reversing wheel direction keeps sideways position mirrored equally.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Change both inside signs: −(4x − π).
Part 5: Negative ω in sine
Sine's Odd function property changes the outside multiplier's sign when you reverse the inside.
- Rule: 7 sin(−2x + π) − 1 = −7 sin(2x − π) − 1.
The same idea, five ways
Negative ω in sine
Sine's Odd function property changes the outside multiplier's sign when you reverse the inside.
- Rule: 7 sin(−2x + π) − 1 = −7 sin(2x − π) − 1.
Reversing wheel direction reverses upward position across the center.
Worked example
Negative sine coefficient changes A too
For y = 7 sin(−2x + π) − 1, rewrite with positive ω and find the four features. This asks you to keep the reflection that cosine would not need.
Show the steps and the answer
- .Factoring −1 changes the signs of both terms inside.
- , so .Sine is an Odd function: reversing the angle reverses its vertical coordinate.
- .Read the positive-speed form.
- Amplitude ; ; right.Distance ignores A's negative sign, while period and shift use positive ω.
- Plug back: ; the original inside also.Both forms reach their selected start at the same x.
- Midline: ; range: .The center is −1 and each extreme is 7 away.
- Amplitude = 7
- Period = π
- Phase shift = right
- Midline: y = −1
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Bring the extra minus outside.
Part 6: Know cold
Learn these short facts until you can say them without opening the notes. The memory devices name what to look at. Return to this list after the worked lessons; the example below shows how its facts connect.
- At the selected inside-input 0 with ω > 0, sine starts at the midline and positive-A cosine starts at a peak. Memory device: sine starts level, positive cosine starts high.
- Amplitude is a distance and is never negative. Memory device: distance drops the sign.
- After rewriting to ω > 0, subtracting a positive inside offset moves right; adding a positive inside offset moves left. Memory device: inside works backward. Check by making the entire inside input 0.
- The midline is an equation y = B. Memory device: center height gets its own line.
Distance drops the sign
Inside works backward when ω > 0
At inside 0: sine middle; positive cosine peak
Midline: y = B
The same idea, five ways
Know cold
Learn these short facts until you can say them without opening the notes. The memory devices name what to look at.
- At the selected inside-input 0 with ω > 0, sine starts at the midline and positive-A cosine starts at a peak. Memory device: sine starts level, positive cosine starts high.
- Amplitude is a distance and is never negative. Memory device: distance drops the sign.
- After rewriting to ω > 0, subtracting a positive inside offset moves right; adding a positive inside offset moves left. Memory device: inside works backward. Check by making the entire inside input 0.
- The midline is an equation y = B. Memory device: center height gets its own line.
Keep a few direction cues beside your study calendar.
Distance drops the sign
Inside works backward when ω > 0
At inside 0: sine middle; positive cosine peak
Midline: y = B
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the parameter line before any feature line.
- For a negative coefficient, test a quarter-turn input to see whether a missing minus changed the output.
Part 7: Understand, then rebuild it when needed
You do not need to memorize a long table of shifted points. Rebuild it from the five basic points and one cycle. Return to this list after the worked lessons; the example below shows how its facts connect.
- Rebuild T and the phase shift by solving 0 ≤ ωx − φ ≤ 2π.
- Rebuild amplitude and midline from the maximum and minimum.
- Rebuild a graph using steps of T ÷ 4 from its chosen cycle start.
- Recognize that shifting by an entire period gives an equivalent equation.
The same idea, five ways
Understand, then rebuild it when needed
You do not need to memorize a long table of shifted points. Rebuild it from the five basic points and one cycle.
- Rebuild T and the phase shift by solving 0 ≤ ωx − φ ≤ 2π.
- Rebuild amplitude and midline from the maximum and minimum.
- Rebuild a graph using steps of T ÷ 4 from its chosen cycle start.
- Recognize that shifting by an entire period gives an equivalent equation.
Rebuild a route from its start and distance rather than memorizing every stop.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write three copies of each addition or division mentally, one for each part.
- A and B never enter the horizontal cycle inequality.
Part 8: Put on the cheat sheet
Keep this compact list together for study or for a permitted reference sheet. Memorize the meanings first; look up a long worked example when practicing. Return to this list after the worked lessons; the example below shows how its facts connect.
- |A| = ; B = .
- One cycle: h ≤ x ≤ h + T. Range: [B − |A|, B + |A|].
- Negative inside coefficient: cos(−u) = cos u; sin(−u) = −sin u.
= B + |A|
= B − |A|
The same idea, five ways
Put on the cheat sheet
Keep this compact list together for study or for a permitted reference sheet. Memorize the meanings first; look up a long worked example when practicing.
- |A| = ; B = .
- One cycle: h ≤ x ≤ h + T. Range: [B − |A|, B + |A|].
- Negative inside coefficient: cos(−u) = cos u; sin(−u) = −sin u.
Keep the wheel's four measurement labels on one reference card.
= B + |A|
= B − |A|
Worked example
A reflected wave above a new center
Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.
Show the steps and the answer
- , so the midline is .The outside addition raises every height by 1.
- .The negative multiplier reflects the wave, but the distance is positive.
- Minimum .Move 3 below the center.
- Maximum .Move 3 above the center.
- The range is , including both endpoints.The sine wave passes continuously through every height between its attained extremes.
- Midline: y = 1
- Range: [−2, 4]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: center uses the sum, size uses the difference.
- Check that the midpoint of your range equals B.
5 How
- If the x-coefficient inside is negative, factor out −1 from the whole inside.
- Use the cosine even rule or sine odd rule.
- Match A, ω, φ and B, keeping signed quantities.
- Compute each feature on its own line.
- Plug the shift into the original and rewritten inside and check the range.
Read the four features
- Normalize a negative ω with the correct sine or cosine sign rule.
- Rewrite an inside plus as subtraction of a negative.
- Read the four signed parameters.
- Compute distances and center, then verify the start and an extreme.
6 Worked example
Worked example
Two minus signs that cancel: y = −10 sin(−x + ) − 5
Find the amplitude, period, phase shift and midline of y = −10 sin(−x + ) − 5. Say which way the graph is shifted and whether it is reflected. Then check the shift in both the original and the rewritten inside, and check the range. The figure shows the midline y = −5 of the finished graph with the five key points of one cycle: (3, −5), (7.5, 5), (12, −5), (16.5, −15) and (21, −5). Your answers should agree with it.
Show the steps and the answer
- Look inside the sine. The x-coefficient is , which is negative. Factor out of the whole inside: .The rule removes a negative speed before any feature is read. The −1 must come out of both terms, so + becomes − inside the brackets. Multiplying back out gives −x + again, so only the form has changed. Writing −(x + ) instead would wrongly send the shift to the left.
- Let , so . Sine is odd, so and . The rewritten function is .The odd rule moves the inner minus sign to the front, where it multiplies the −10. Two negatives make a positive, so the coefficient in front becomes +10. The − 5 outside the sine is not affected.
- Match with . This gives and .All four features are read from the rewritten form, where the speed is positive. φ is the amount subtracted from ωx, so φ = +. The constant outside the sine is − 5, so B = −5 with its sign kept.
- Amplitude . Because is positive, the graph is not reflected.Amplitude is the height from the midline to a peak, so it is the absolute value of A. The −10 in the original only looked like a reflection, because the minus sign from sin(−u) cancelled it.
- Period .One sine cycle is complete when the inside has grown by 2π. The inside grows by for each unit of x, so a cycle takes 18 units of x.
- Phase shift . The shift is positive, so the graph is shifted 3 units to the right.x − = (x − 3), so the cycle that normally starts at x = 0 now starts at x = 3. A positive phase shift means right and a negative one means left.
- Midline: .B lowers the whole graph by 5, so the curve rises and falls by equal amounts about the horizontal line y = −5.
- Put into both insides. Original: . Rewritten: . Then .The phase shift is where a cycle starts, so the inside must equal 0 there. Getting 0 in the original form as well as the rewritten one confirms both the factoring and the direction of the shift. y = −5 shows that the start point lies on the midline.
- Range: , so , which gives . In the original, gives the inside , so . Also gives the inside , so .The value of sin stays between −1 and 1, so y stays within |A| = 10 of the midline. The maximum 5 comes a quarter period after the start (3 + 4.5 = 7.5), and the minimum −15 comes three quarters of the way through (3 + 13.5 = 16.5). The graph rises first, as an unreflected sine should.
- Rewritten, the function is y = 10 sin(x − ) − 5. Amplitude 10
- period 18
- phase shift 3, so the graph is shifted 3 units to the right
- midline y = −5. The graph is not reflected, because the minus in −10 cancels the minus from sin(−u) = −sin u. Its range is −15 ≤ y ≤ 5.
Work to write
- sin(−u) = −sin u, so −10 sin(−u) = 10 sin u
- Amplitude = |10| = 10; not reflected
- Period = 2π ÷ = 18
- Phase shift = ÷ = 3, so 3 units to the right
- Midline: y = −5
- x = 3: − + = 0 and − = 0
- Range: −15 ≤ y ≤ 5
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
Standard sine: four features with a plus inside and a negative midline
Find the amplitude, period, phase shift and midline of y = 4 sin(x + ) − 2. Say which way the graph is shifted, then check the shift and the range.
Show the steps and the answer
- Look at the x-coefficient inside the sine. In it is , which is positive, so there is no to factor out. The inside stays .A −1 is factored out only when the number multiplying x is negative. A positive coefficient already gives ω > 0, which the period and phase-shift formulas need.
- Use neither rule. The function stays , and the 4 in front keeps its sign.The sine odd rule sin(−u) = −sin u is used only after a −1 has been pulled out of the inside. Nothing was pulled out, so A is not flipped to −4.
- Write the inside in the form : . Match to get and .The form subtracts φ, so adding means φ = −. The − 2 outside means B = −2, not 2. Keeping these signs makes the shift and the midline come out right.
- Amplitude .Amplitude is the distance from the midline to a peak. It is the size of A and is never negative.
- Period .Sine repeats each time its inside grows by 2π, and the inside grows by for every 1 unit of x.
- Phase shift . The graph is shifted 2 units to the left.A sine cycle starts where its inside is 0, which happens at x = . A negative shift puts that start to the left of x = 0.
- Midline: .Adding B moves the whole curve up or down, so the curve is centred on the line y = B.
- Plug the shift into the inside. Steps 1 and 2 left it unchanged, so the original inside and the rewritten inside are the same: . The range runs from to , so it is .The inside must be 0 at the phase shift, because that is where the cycle starts on the midline. The curve reaches exactly |A| above and below the midline, so the range is [B − |A|, B + |A|].
Work to write
- x-coefficient + > 0: no −1 to factor out, no odd rule
- Amplitude = |4| = 4
- Period = = 2π ÷ = 8
- Phase shift = = − ÷ = −2 (2 units left)
- Midline: y = −2
- Check: (−2) + = 0; range [−6, 2]
Rung 2 of 5
Cosine with a negative x-coefficient inside
Find the amplitude, period, phase shift and midline of y = 3 cos(−x + ) − 1. Say which way the graph is shifted. Then check the shift in both the original and the rewritten inside, and check the range. The figure is the finished check sketch. It shows the midline and the five key points of one cycle.
Show the steps and the answer
- The x-coefficient inside is , which is negative. Factor out of the whole inside: .The −1 has to come out of both terms, so + turns into − inside the bracket. Multiplying back out gives −x + again, so only the look has changed.
- Use the cosine even rule with : .Cosine is even, so the −1 in front of u drops away and the 3 out front stays 3. Only the sine odd rule would move a minus sign onto A.
- Match to : .The form has a minus in front of φ, so − means φ = +. The − 1 at the end means B = −1. Each sign is kept exactly as the form reads it.
- Amplitude .The amplitude is the height of the peaks above the midline. It is the size of A, so it is never negative.
- Period .One cycle of cosine uses 2π of inside. With the speed now positive, the x-length of a cycle is 2π divided by ω. Dividing by the original − would have given −12, a negative length, which is why the −1 was factored out first.
- Phase shift , so the graph is shifted 4 units to the right.A positive means a shift to the right. The plus sign in the original inside does not mean left. Once −1 is factored out it becomes the minus in ωx − φ, and that sign sets the direction.
- Midline: .B is the vertical shift, so the graph swings 3 units above and 3 units below the line y = −1.
- Plug the shift into both insides. Original: . Rewritten: .The phase shift is the x where the inside is 0, which is where a cosine cycle starts. Both forms describe the same function, so both insides must be 0 there.
- Check the range. At . Since cos runs from to 1, y runs from to , so the range is .The range must be [B − |A|, B + |A|] = [−1 − 3, −1 + 3], centered on the midline. The cycle that starts at x = 4 must start at the top value 2, because cos 0 = 1.
Work to write
- y = 3 cos(x − ) − 1, because cos(−u) = cos u
- Amplitude = |3| = 3
- Period = 2π ÷ = 12
- Phase shift = ÷ = 4, so 4 units to the right
- Midline: y = −1
- At x = 4: original inside = 0 and rewritten inside = 0
- Range: [−4, 2]
Rung 3 of 5
Cosine with a negative fractional speed: fractions in both inside positions
Find the amplitude, period, phase shift and midline of y = 5 cos(−x + ) + 2. Say which way the graph is shifted. Then check the shift in both the original and the rewritten inside, and check the range. The figure is drawn from the answer and shows the midline and the five key points of one cycle.
Show the steps and the answer
- The x-coefficient is negative, so factor out of the whole inside: .The period and shift formulas need a positive speed ω. The −1 comes out of both terms, so the constant changes sign too: + becomes − inside the bracket. Expanding −(x − ) gives back −x + , so the function has not changed.
- Use the cosine even rule with : .Cosine is even. On the unit circle the angles u and −u are mirror images across the x-axis, so they share the same x-coordinate, and that x-coordinate is the cosine. The minus in front of the bracket drops and the 5 stays 5. Only a sine would change A, because sin(−u) = −sin u.
- Match with : .The pattern has a minus in front of φ, so the − in the bracket means φ = +. Keeping that sign decides the direction of the shift.
- Amplitude: .The amplitude is the vertical distance from the midline to a maximum, and a distance is never negative.
- Period: .Dividing by the fraction means multiplying by its reciprocal . The π cancels, leaving 2 × 8 = 16. One full cycle covers 16 units of x.
- Phase shift: . It is positive, so the graph is shifted 6 units to the right.Both positions hold fractions, so again multiply by the reciprocal of ω. The π cancels and × 8 = 6. In y = A cos(ωx − φ) + B a positive means a shift to the right. The factored form x − = (x − 6) shows the same thing.
- Midline: .The + 2 is added outside the cosine, so every point of the graph is lifted by 2 and the graph swings evenly about the line y = 2.
- Plug the shift into both insides. Original: . Rewritten: . At that point .A cosine cycle starts where its inside is 0. Both insides are 0 at the same x, which shows the rewrite kept the function the same. The value y = 7 = B + |A| shows the cycle starts at a maximum, as a cosine cycle should.
- Check the range: cosine runs from to 1, so y runs from to , giving .The graph reaches |A| above and |A| below the midline: 2 + 5 = 7 and 2 − 5 = −3. The top value 7 agrees with the maximum found at x = 6.
- Amplitude 5
- period 16
- phase shift 6 units to the right
- midline y = 2. The rewritten form is y = 5 cos(x − ) + 2, and the range is −3 ≤ y ≤ 7.
Work to write
- cos(−u) = cos u, so y = 5 cos(x − ) + 2
- Amplitude = |5| = 5
- Period = 2π ÷ = 2π × = 16
- Phase shift = ÷ = × = 6, so 6 units to the right
- Midline: y = 2
- x = 6: original inside −(6) + = 0; rewritten inside (6) − = 0
- Range: 5(−1) + 2 = −3 to 5(1) + 2 = 7, so −3 ≤ y ≤ 7
Rung 4 of 5
Every sign negative: a reflected cosine with a negative speed and a minus inside
Find the amplitude, period, phase shift and midline of y = −2 cos(−x − ) − 4. Say which way the graph is shifted. Then check the shift in both the original and the rewritten inside, and check the range. The figure shows the finished result: the midline drawn as a horizontal line, with the lowest, highest and next lowest points of one cycle marked.
Show the steps and the answer
- The x-coefficient inside is , which is negative, so factor out of the whole inside: .The period and shift formulas need a positive speed. The −1 has to come out of both terms, so the minus in front of becomes a plus inside the bracket.
- Use the cosine even rule with : .Cosine is even, so removing the −1 inside changes nothing outside. The −2 in front and the −4 at the end stay as they were. With sine, the odd rule would also flip the sign of A.
- Match with . The inside means and . So .The form has a minus before φ, so a plus inside makes φ negative. Keeping every sign records three things: the graph is flipped (A < 0), it moves left (φ < 0), and the midline is below the x-axis (B < 0).
- Amplitude .Amplitude is the distance from the midline to a peak, so it is never negative. The minus on A only turns the graph upside down.
- Period .After the rewrite ω = is positive, so the period is positive. One full cycle takes 10 units of x.
- Phase shift , so the graph is shifted 3 units to the left.A negative phase shift means a move to the left. The minus in front of in the original became a plus when −1 was factored out, and that plus is what sends the graph left.
- Midline: .B is the vertical shift and keeps its sign, so the graph oscillates about the line y = −4, below the x-axis.
- Put into both insides. Original: . Rewritten: . Then . The range runs from to .At the phase shift the rewritten inside is 0. The original inside is its negative, so it is 0 as well. Because A < 0, a cycle starts at its lowest point, and that lowest value has to be B − |A|.
- Amplitude 2
- period 10
- phase shift −3, so the graph is shifted 3 units to the left
- midline y = −4. The range is −6 ≤ y ≤ −2. Because A = −2 is negative, each cycle starts at a lowest point.
Work to write
- Amplitude = |−2| = 2
- Period = 2π ÷ = 10
- Phase shift = − ÷ = −3, so 3 units to the left
- Midline: y = −4
- x = −3: original inside − = 0, rewritten inside − + = 0
- Range: −6 ≤ y ≤ −2
Rung 5 of 5
Negative sine coefficient changes A too
For y = 7 sin(−2x + π) − 1, rewrite with positive ω and find the four features. This asks you to keep the reflection that cosine would not need.
Show the steps and the answer
- .Factoring −1 changes the signs of both terms inside.
- , so .Sine is an Odd function: reversing the angle reverses its vertical coordinate.
- .Read the positive-speed form.
- Amplitude ; ; right.Distance ignores A's negative sign, while period and shift use positive ω.
- Plug back: ; the original inside also.Both forms reach their selected start at the same x.
- Midline: ; range: .The center is −1 and each extreme is 7 away.
- Amplitude = 7
- Period = π
- Phase shift = right
- Midline: y = −1
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the parameter line before any feature line.
- For a negative coefficient, test a quarter-turn input to see whether a missing minus changed the output.
7 The trap
The chosen cycle start is an upward crossing for positive-A sine and a peak for positive-A cosine. Negative A reverses those starting features.
Keep in mind
- Make the inside coefficient positive first: cos(−5x) = cos(5x), but sin(−5x) = −sin(5x).
- A plus inside means φ is negative: in sin(2x + π), φ = −π, so the shift is to the left.
- Give each feature its own answer line so one slip does not spread: for y = 2 sin x the amplitude is 2, the period 2π, the phase shift 0 and the midline y = 0.
- Check the shift in the original formula: for y = 4 sin(−2x + ) − 1, x = makes the inside − + = 0.
Memory hook
Cosine is even: it swallows the inside minus. Sine is odd: it spits the minus out front.
Flash cards
Say the answer out loud, then flip.
What does it mean that cosine is even?
What does it mean that sine is odd?
Rewrite y = cos(−7x) with a positive inside coefficient.
Rewrite y = 2 sin(−x) with a positive inside coefficient.
Find all four features of y = −7 sin(2x + π) + 2.
- Amplitude: 7
- Period: π
- Phase shift: to the left
- Midline: y = 2
In y = −4 cos x + 2, is the amplitude −4?
Lesson 8 of 9
Build an equation from a graph
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of rebuilding a Ferris wheel from a picture and a timing record. The highest and lowest positions tell you the center and size. Two neighboring peaks tell you how long one trip takes. Then you choose where to call the start. A positive Cosine model begins at a peak. A positive Sine model begins where the wave crosses its center going up. Either can describe the same picture. You must match the direction at that point, not only its height. Once you have those measurements, writing the equation is filling four labeled slots. You can then predict points and compare them with the graph.
Explain it like I am five
Think of rebuilding a Ferris wheel from a photo and a stopwatch: top and bottom seats give its size and hub height, the time from top to top gives one turn, and you pick a start.
A graph peaks at y = 10, bottoms at y = 2, and has neighboring peaks at x = 1 and x = 7. Size: A = = 4. Center: B = = 6. Period: T = 7 − 1 = 6, so ω = = . A positive cosine starts at a peak, so the start is h = 1 and φ = ω × h = . Equation: y = 4 cos(x − ) + 6.
Check x = 4, halfway between the peaks: the inside is × 4 − = − = π, cos π = −1, and y = −4 + 6 = 2, the bottom. Why φ = ω × h: at the start x = h the inside ω × h − φ must be 0.
2 Picture it
Reminder
Reminder: Average and half-difference, Horizontal distance, Recover input speed, Solving for φ, Quarter-turn values
- Average and half-difference. Maximum 9 and minimum 3 give B = 6 and A = 3.
- Horizontal distance. From x = 1 to x = 9 the distance is 8.
- Recover input speed. T = 8 gives ω = ; multiplying by 8 gives 2π.
- Solving for φ. At h = 1, ωh − φ = 0 gives φ = ωh; substituting gives ωh − ωh = 0.
- Quarter-turn values.
3 Why
The extreme-height formulas determine |A| and B. Adjacent matching graph features determine T, which determines ω = . Choosing positive A fixes the meaning of the start: an upward midline crossing for sine or a maximum for cosine. At x = h, the inside ωx − φ must equal 0, so φ = ωh. One quarter period changes the inside by , giving the intermediate graph stages and a direct check of the equation.
4 The rule
.
Choose h at an upward middle crossing for sine or a peak for cosine.
The same idea, five ways
Build a sine or cosine rule that matches the pictured wave.
A graph determines height, center, repeat width and a suitable cycle start.
- φ = ωh
- Quarter period =
- Graph words: use a peak or an upward midline crossing.
Rebuild a wheel's size and timing from a picture of its motion.
The same idea, other ways
Height span, center height, repeat width and chosen starting position fill four formula slots.
Reading a formula predicts a graph. Reading the graph recovers the same numbers by undoing those predictions.
Part 1: Positive sine at an upward middle crossing
A Midline crossing is where the wave passes through its center height. An upward crossing passes from below the center to above it. Positive sine has exactly that direction at inside input 0.
- Rule: choose h at an upward crossing when A > 0.
The same idea, five ways
Positive sine at an upward middle crossing
An upward crossing means the graph passes from below the center to above it. Positive sine has exactly that direction at inside input 0.
- Rule: choose h at an upward crossing when A > 0.
Start timing the wheel when the seat passes its center while rising.
Worked example
An upward middle crossing
A graph has maximum 8, minimum −2, period 10 and an upward midline crossing at x = 2. Write a positive sine equation. Upward means the height passes through the middle from below to above.
Show the steps and the answer
- and .Half the span gives the amplitude; average gives the center.
- .The inside must advance one full turn during 10 horizontal units.
- Choose positive sine with , the upward middle crossing.Sine begins at 0 and rises, so after adding 3 it starts at the center and rises.
- .Convert horizontal position into inside offset.
- Plug back: .The crossing is at the intended inside start.
- Write .The positive A preserves the upward direction.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check that the graph rises through the selected crossing.
Part 2: Positive cosine at a peak
Positive cosine gives its top height at inside 0, so a peak supplies h directly.
- Rule: choose h at a maximum when A > 0.
The same idea, five ways
Positive cosine at a peak
Positive cosine gives its top height at inside 0, so a peak supplies h directly.
- Rule: choose h at a maximum when A > 0.
Start timing the wheel when the seat reaches its top.
Worked example
A shifted cosine graph
A smooth sinusoidal graph has maximum 9, minimum 3 and consecutive peaks at x = 1 and x = 9. Write a positive cosine equation. This asks you to turn its heights, width and peak position into a formula.
Show the steps and the answer
- and .The two extreme heights determine size and center.
- ; .Adjacent peaks are the same stage one cycle apart.
- Choose cosine with positive A and .At the chosen start, positive cosine sits at a peak.
- .φ is an inside offset, so multiply the x-distance by the inside coefficient.
- Plug h back: .The chosen peak position feeds cosine its starting input.
- Write , or .Factoring displays the horizontal distance without changing the function.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use a peak, or choose negative A for a trough.
Part 3: Different equivalent equations
A selected phase shift belongs to the chosen sine or cosine representation. The same wave can have a different start in another representation. Moving h by a whole T also keeps the same repeating graph. On the unit circle, a clockwise quarter turn sends a point's vertical coordinate to its horizontal coordinate. Therefore sin u = cos(u − ) for every angle u, which explains the quarter-period difference between matching positive sine and cosine starts.
- Rule: replacing h with h + T advances the inside by −2π, a full turn.
- Rule: sine and cosine starts are a quarter period apart for the same positive-A wave.
- Rule: sin u = cos(u − ) and cos u = sin(u + ). The quarter turn exchanges the coordinate read without changing its value.
The same idea, five ways
The same wave can be described from a middle crossing or from a peak.
A selected phase shift belongs to the chosen sine or cosine representation. The same wave can have a different start in another representation. Moving h by a whole T also keeps the same repeating graph.
- = + for matching positive-A starts
Start describing the same wheel ride at a different moment.
Worked example
A sine equation for the same cosine picture
Use the same graph with peaks at x = 1 and 9, maximum 9 and minimum 3. Write a positive sine equation instead of cosine. This asks for a sine start that produces the same highs and lows as the cosine picture.
Show the steps and the answer
- .Changing the wave name does not change the graph's size, center or period.
- An upward middle crossing occurs one quarter period before the peak at 1: .Positive sine rises from its middle to its peak during the first quarter cycle.
- .The selected sine start lies one unit left of 0.
- Plug back: .That crossing is the inside sine start.
- Write .A negative φ produces a plus in the standard sine input.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Compare the predicted graph stages and their directions.
Part 4: Quarter-period key points
Key points mark the four quarter-turn stages and the return to the start. Add repeatedly from h, then read the sine or cosine heights.
- Rule: inputs h, h + , h + , h + , h + T.
The same idea, five ways
Quarter-period key points
Key points mark the four quarter-turn stages and the return to the start. Add repeatedly from h, then read the sine or cosine heights.
- Rule: inputs h, h + , h + , h + , h + T.
Place four equal time marks along a one-revolution timetable.
Worked example
Use quarter periods to draw a cycle
For y = 3 cos((x − 1)) + 6, locate the five Key points of one cycle. This asks for the peak, middle, trough, middle and next peak.
Show the steps and the answer
- The start is and , so Quarter period .A full turn has four quarter-turn steps.
- Use with , 1, 2, 3, 4; the table shows these inputs.Each step advances the inside by () × 2 = .
- In the table, the column under 1 has inside 0, so .Positive cosine starts at a peak.
- The columns under 3 and 7 have inside and , so .Cosine gives 0 at the two middle stages.
- The column under 5 has inside , so ; the column under 9 returns to inside and output 9.The half-turn gives the trough and the full turn gives the next peak.
- Five points:
- (1, 9)
- (3, 6)
- (5, 3)
- (7, 6)
- (9, 9)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Add along the input axis, then compute each output.
5 How
- Read the maximum and minimum, then find positive A and B.
- Read T between adjacent matching stages.
- Compute ω = 2π ÷ T.
- Choose sine at an upward middle crossing or cosine at a peak; read h.
- Compute φ = ωh and substitute h back into the inside.
- Check points one quarter period apart.
Turn a graph into an equation
- Recover height and center from the extrema.
- Recover timing from two adjacent matching points.
- Pick a convenient positive-A start.
- Convert h to φ and check the five cycle stages.
6 Worked example
Worked example
A centered cosine graph
A smooth cosine-shaped graph has maximum 1, minimum −1 and adjacent peaks at x = 0 and x = 2π. Write one equation. You are converting the pictured heights and repeat width into a rule.
Show the steps and the answer
- Amplitude ; .Half-difference gives size, and average gives center.
- , so .Adjacent peaks mark one full cycle.
- Choose positive cosine with , the first peak.Positive cosine reaches its maximum when its inside is 0.
- φ = ωh = 1 × 0 = 0; plug back: .The peak's x-coordinate gives the inside start after converting h to φ.
- Write .All four parameters are now fixed.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
A centered cosine graph
A smooth cosine-shaped graph has maximum 1, minimum −1 and adjacent peaks at x = 0 and x = 2π. Write one equation. You are converting the pictured heights and repeat width into a rule.
Show the steps and the answer
- Amplitude ; .Half-difference gives size, and average gives center.
- , so .Adjacent peaks mark one full cycle.
- Choose positive cosine with , the first peak.Positive cosine reaches its maximum when its inside is 0.
- φ = ωh = 1 × 0 = 0; plug back: .The peak's x-coordinate gives the inside start after converting h to φ.
- Write .All four parameters are now fixed.
Rung 2 of 4
Raised cosine graph
A graph has maximum 9, minimum 3, and adjacent peaks at x = 0 and x = 8. Write a positive cosine equation. This asks for the wave's size, center and repeat width, with its peak placed at input 0.
Show the steps and the answer
- and .Choose positive A so a peak is the cosine start.
- , so .The two peaks enclose one full inside turn.
- , so . At , the inside is 0.The first peak is at the standard cosine start.
- Write .Combine size, speed, position and center.
Rung 3 of 4
A shifted cosine graph
A smooth sinusoidal graph has maximum 9, minimum 3 and consecutive peaks at x = 1 and x = 9. Write a positive cosine equation. This asks you to turn its heights, width and peak position into a formula.
Show the steps and the answer
- and .The two extreme heights determine size and center.
- ; .Adjacent peaks are the same stage one cycle apart.
- Choose cosine with positive A and .At the chosen start, positive cosine sits at a peak.
- .φ is an inside offset, so multiply the x-distance by the inside coefficient.
- Plug h back: .The chosen peak position feeds cosine its starting input.
- Write , or .Factoring displays the horizontal distance without changing the function.
Rung 4 of 4
An upward middle crossing
A graph has maximum 8, minimum −2, period 10 and an upward midline crossing at x = 2. Write a positive sine equation. Upward means the height passes through the middle from below to above.
Show the steps and the answer
- and .Half the span gives the amplitude; average gives the center.
- .The inside must advance one full turn during 10 horizontal units.
- Choose positive sine with , the upward middle crossing.Sine begins at 0 and rises, so after adding 3 it starts at the center and rises.
- .Convert horizontal position into inside offset.
- Plug back: .The crossing is at the intended inside start.
- Write .The positive A preserves the upward direction.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Choose the starting point with the clearest graph label.
- If asked for one equation, equivalent sine and cosine answers may both fit.
7 The trap
A graph alone does not force a unique phase shift. State which sine or cosine start you chose and check that the equation reproduces the pictured stages.
Keep in mind
- A positive cosine starts at a peak and a positive sine starts where the wave crosses its midline going up, so read h at the feature that matches your choice.
- The period runs peak to next peak: peaks at x = 1 and x = 7 give T = 6, not 3, since peak to trough is half a cycle.
- Multiply to get φ: φ = ω × h, so ω = and h = 1 give φ = , not 1.
- More than one equation is correct: starting at the next peak, h = 7, gives y = 4 cos(x − ) + 6, the same graph.
Memory hook
Top and bottom give A and B, peak to peak gives T, then ω = . Cosine starts at a peak, sine at a rising middle crossing.
Flash cards
Say the answer out loud, then flip.
From a graph, how do you get A and B?
- A =
- B =
Where does a positive cosine model start? Where does a positive sine model start?
- Cosine: at a peak
- Sine: where the wave crosses its midline going up
Neighboring peaks sit at x = 2 and x = 14. Find T and ω.
- T = 12
Max 13, min 1, a peak at x = 2, period 12. Write a cosine equation.
Why is φ = ω × h?
Peaks at x = 0 and x = 10, with a trough at x = 5. Is the period 5?
Lesson 9 of 9
Build and check a daylight model
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of drawing a smooth line through a year's calendar of daylight measurements. Winter days are short, summer days are long, and the pattern returns the next year. The measurements are Data: recorded values. A Sinusoidal model is a sine or cosine rule chosen to approximate their repeating rise and fall. The month number is the input, and the number of daylight hours is the output. Here Latitude describes how far north or south a location is; the notes give observations at 60°. You use the observed top and bottom to set the wave's size and center, then choose a practical start. A smooth approximation can miss individual dots.
Explain it like I am five
Picture a year of daylight on a fridge calendar: short winter days, long summer days, repeating. A model is a formula following that rise and fall. Here t counts months (t = 1 is January) and D(t), read "D of t", counts daylight hours.
The notes' table (60° latitude, far north) peaks at 18.72 hours and bottoms at 5.88. A = = 6.42 and B = = 12.3. It repeats every 12 months: ω = = . A positive sine starts where the wave crosses its midline going up: April, t = 4, the rising month nearest 12.3 hours. So the start is h = 4 and φ = ω × h = = , giving D(t) = 6.42 sin(t − ) + 12.3.
Check July, t = 7: the inside is − = , so sine is 1 and D = 6.42 + 12.3 = 18.72, a match. December, t = 12, gives about 6.74 against the table's 5.88: a model follows the pattern and can miss single months.
2 Picture it
Reminder
Reminder: Decimal arithmetic, Month input, Positive sine start, Fraction addition, Special sine value
- Decimal arithmetic. 18.72 − 5.88 = 12.84; half is 6.42. Their sum is 24.60; half is 12.30.
- Month input. D(7) means the model output for July because t = 7 labels July.
- Positive sine start. At t = 4 the model's inside is 0, so its output is B = 12.3 and it rises.
- Fraction addition.
- Special sine value. sin() = comes from the 30°, 60°, 90° triangle.
3 Why
The observed extremes give a reasonable height span and center. Annual repetition gives T = 12, fixing the inside speed. A rising middle crossing can anchor positive sine, but sampled months do not usually land exactly on that crossing. The notes choose April as an approximate rising anchor, so the resulting formula is a model, not exact interpolation. Checking another month exposes the difference between a predicted output and an observed value and keeps the approximation honest.
4 The rule
for a fitted positive-A sine wave, .
Choose h near a rising middle crossing and compare predictions with observations.
The same idea, five ways
A sinusoidal model is a repeating sine or cosine estimate of measurements.
Choose a smooth periodic wave to approximate the observed daylight data.
- D(t + 12) = D(t) for this model
- Graph words: observed dots compared with a smooth wave.
Trace a smooth seasonal guide through a calendar's recorded daylight heights.
The same idea, other ways
The dots are measurements. The curve is an approximation chosen from a fixed family, so it may pass above or below a dot.
A = 6.42 is in hours; T = 12 and h = 4 are in months. The inside t − is an angle in radians.
Part 1: Read the table and repeat it for two years
The same observed month returns twelve input units later in this plotted repeating pattern. Second-year observations are assumed repeats for this exercise, not new measurements.
- Rule: January is t = 1 and the next January is t = 13.
- Rule: repeat the plotted observations by adding 12 to the input.
The same idea, five ways
Read the table and repeat it for two years
The same observed month returns twelve input units later in this plotted repeating pattern. Second-year observations are assumed repeats for this exercise, not new measurements.
- Rule: January is t = 1 and the next January is t = 13.
- Rule: repeat the plotted observations by adding 12 to the input.
Copy one year's calendar onto the next year's dates.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The next January is t = 13.
Part 2: Choose height, center and timing
Half-span and average set the heights. The annual cycle sets speed. Positive sine needs a rising middle crossing; positive cosine needs a peak.
- Rule: A = 6.42, B = 12.3, T = 12.
- Rule: positive cosine can use h = 7 at the July peak.
The same idea, five ways
Choose height, center and timing
Half-span and average set the heights. The annual cycle sets speed. Positive sine needs a rising middle crossing; positive cosine needs a peak.
- Rule: A = 6.42, B = 12.3, T = 12.
- Rule: positive cosine can use h = 7 at the July peak.
Read the wheel's size and center first, then choose a point on its timetable.
Worked example
Use the July peak as a cosine start
Write the equivalent positive cosine daylight approximation from the same extrema and the July peak at t = 7. This asks for another start description of the same chosen smooth wave.
Show the steps and the answer
- Keep and .The size, center and repeat width stay the same.
- Choose for positive cosine because July is the observed peak.Positive cosine reaches its maximum at inside input 0.
- . Plug back: .Convert the chosen peak time into an inside offset.
- Write .The new start is one quarter period after the sine start 4.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use the rising April anchor approximately, or use cosine at July.
Part 3: Check prediction against observation
Predicting means evaluate the fitted rule. Checking the fit means compare that prediction with the recorded value in the table. Substitution means replacing t with the chosen month number.
- Rule: a model prediction need not equal the observed output.
The same idea, five ways
Put the month into the model, then compare the predicted hours with the recorded hours.
Predicting means evaluate the fitted rule. Checking the fit means compare that prediction with the recorded value in the table.
- Observed June daylight = 18.28
- 18.28 − D(6) ≈ 0.4201 hour
Compare a predicted timetable with the arrival times you actually recorded.
Worked example
Predict June and compare with the observation
Use the instructor's sine model to estimate daylight at t = 6. This asks for the model output for June, then how it differs from the source table.
Show the steps and the answer
- Substitute : inside .Evaluation means put the known time into every t-slot.
- .A radian angle is 60°, whose sine comes from the special triangle.
- .Multiply the numerical coefficient by one half.
- hours, rounded to four decimal places.The radical is exact, while its decimal approximation is rounded.
- The June column gives 18.28. Using the exact prediction, observed minus modeled hour, rounded to four decimal places.Compare predicted output with observed output, keeping rounding at the end.
- Exact model output: 12.3 + 3.21 hours
- Rounded model output: 17.8599 hours
- Observed June daylight: 18.28 hours
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Report both the model output and the observed output.
5 How
- Define the time input and the output units.
- Draw the table and plot the observed points.
- Read the observed maximum, minimum and repeating interval.
- Choose a suitable sine crossing or cosine peak.
- Assemble the model and check several months.
- Repeat the observation pattern by T for the requested longer plot.
Fit and check a repeating data model
- Define t and the measured output.
- Use extrema for A and B and repetition for T.
- Pick a reference stage with the correct direction.
- Compute φ from h, then compare the formula with several observed dots.
6 Worked example
Worked example
Model rung 1: one exact repeating table
A synthetic repeating table is shown. The first zero crossing is upward, and the next matching crossing is at t = 4. Write a sine model. This asks for a rule that follows the recorded rise and fall.
Show the steps and the answer
- Read the high output 1 and low output . ; .Half the span gives height distance; half the sum gives center.
- , so .Adjacent upward crossings give the full repeat width.
- Choose positive sine at h = 0. φ = ωh = 0. Plug back: .This puts the inside start at the recorded rising center crossing.
- Write . Read the columns under 1 and 3: the inside angles are and , giving 1 and .The quarter-turn values reproduce the two recorded extremes.
- Amplitude = 1
- Period = 4
- Midline: y = 0
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Model rung 1: one exact repeating table
A synthetic repeating table is shown. The first zero crossing is upward, and the next matching crossing is at t = 4. Write a sine model. This asks for a rule that follows the recorded rise and fall.
Show the steps and the answer
- Read the high output 1 and low output . ; .Half the span gives height distance; half the sum gives center.
- , so .Adjacent upward crossings give the full repeat width.
- Choose positive sine at h = 0. φ = ωh = 0. Plug back: .This puts the inside start at the recorded rising center crossing.
- Write . Read the columns under 1 and 3: the inside angles are and , giving 1 and .The quarter-turn values reproduce the two recorded extremes.
- Amplitude = 1
- Period = 4
- Midline: y = 0
Rung 2 of 3
Model rung 2: a raised repeating height
The synthetic table shows a peak at t = 0, a low at t = 5, and the next peak at t = 10. Write a positive cosine model. This asks for its center, size and repeating timing.
Show the steps and the answer
- ; .The largest and smallest outputs in the picture set the amplitude and center.
- ; .Peak to next peak measures a complete repeat.
- Choose cosine with ; . At the inside is 0.Positive cosine starts at the chosen peak.
- Write . At , the inside is , so .The independent half-period check reproduces the recorded minimum.
- Amplitude = 5
- Period = 10
- Midline: y = 12
Rung 3 of 3
Model rung 3: recover a shifted repeat
The synthetic table has consecutive peaks at t = 6 and t = 22 and a trough at t = 14. Write a cosine model and explain its shift. This asks you to convert the recorded peak time into the inside offset.
Show the steps and the answer
- ; .Half the extreme separation sets size and their average sets center.
- ; .The consecutive peak columns show a repeat distance, not the absolute position 22.
- Choose for positive cosine. Make the inside zero there: , so .Solving finds the inside subtraction that places the model peak at the recorded time.
- Plug back: .The candidate offset feeds cosine its peak input at t = 6.
- Write . The selected shift is 6 units right.The four controls now reproduce the recorded height, width, peak position and center.
- Amplitude = 8
- Period = 16
- Phase shift = 6 units right
- Midline: y = 11
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Attach units to amplitude and period; they measure different directions.
- Check a high point and at least one middle or low point.
- Keep π exact until evaluating a rounded numerical prediction.
7 The trap
Do not confuse an observed height with a model prediction. The instructor's formula approximates the table and does not exactly place every observed extreme in its recorded month.
Keep in mind
- A model approximates the data: D(12) ≈ 6.74 hours while the table shows 5.88, and that gap does not mean you made a mistake.
- Reduce φ after multiplying: with ω = and h = 4, φ = = .
- Keep the units straight: t is in months, D is in hours, and the period is 12 because the daylight pattern repeats every 12 months.
Memory hook
Half the gap is A, half the sum is B, the repeat length T gives ω = , and the rising midline crossing gives h.
Flash cards
Say the answer out loud, then flip.