Trigonometry / Inverse trigonometric functions
Inverse trigonometric functions
All 8 lessons, in order.
The unit at a glance
- Why a trig function needs its domain cut before it can have an inverse
A function is a machine: one input goes in, one output comes out.
- The inverse sine
Sine takes an angle and gives back a height.
- The inverse cosine
Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom.
- The inverse tangent
Think of a ramp.
- Exact values by the sign and the quadrant
Finding an exact inverse value is like giving a taxi driver an address in two parts.
- A function and its inverse undo each other, with conditions
Picture a Ferris wheel of radius 1 turning counterclockwise.
- Mixing the functions with a right triangle
Picture a ladder 5 feet long leaning on a wall, its top 3 feet up.
- Inverse values on a calculator, and why one answer is not all the answers
Picture a Ferris wheel.
Rules (8)
- Why a trig function needs its domain cut before it can have an inverse
Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once. A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−, ], where sin θ takes every value in [−1, 1] exactly once.
- The inverse sine
y = arcsin x, also written y = x, means sin y = x and − ≤ y ≤ .
Domain: [−1, 1]. Range: [−, ], which is −90° to 90°. - The inverse cosine
The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0, π]. So y = arccos x, also written y = x, means cos y = x and 0 ≤ y ≤ π.
Domain of arccos: [−1, 1]. Range of arccos: [0, π]. - The inverse tangent
y = arctan x, also written y = tan⁻¹ x, means tan y = x and − < y < .
Domain: all real numbers, (−∞, ∞). Range: (−, ), with both ends left out. Horizontal asymptotes: y = − and y = . - Exact values by the sign and the quadrant
Let r be the reference angle: the angle from 0 to whose sine, cosine or tangent (the one being undone) equals the input without its minus sign. A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π − r for arccos. In symbols: arcsin(−x) = −arcsin x, arctan(−x) = −arctan x, arccos(−x) = π − arccos x. The result is the principal value: the one angle inside the range.
- A function and its inverse undo each other, with conditions
sin(arcsin x) = x for x in [−1, 1] (undefined for other x); arcsin(sin x) = x for x in [−, ], and for any other x it is the angle in [−, ] with the same sine.
cos(arccos x) = x for x in [−1, 1] (undefined for other x); arccos(cos x) = x for x in [0, π], and for any other x it is the angle in [0, π] with the same cosine. - Mixing the functions with a right triangle
For an expression such as cos(arcsin a): let θ = arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from ad + op = hy; then read sin θ = , cos θ = or tan θ = . When θ lands on an axis (a = 0, or a = 1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) = cos = 0. For a letter: cos(arcsin x) = , for −1 ≤ x ≤ 1.
- Inverse values on a calculator, and why one answer is not all the answers
The sin⁻¹, cos⁻¹ and tan⁻¹ keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin⁻¹ k in [−, ], cos⁻¹ k in [0, π], tan⁻¹ k in (−, ), named in the units the mode is set to.
On [0, 2π), sin t = k and cos t = k have two solutions when −1 < k < 1, one when k = 1 or k = −1, and none when k < −1 or k > 1; tan t = k has two for every k. With the reference angle α = the key pressed on |k|, the solutions are the angles among α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0, 2π) that solves the equation (sin t = 0 at 0 and π, cos t = 0 at and , tan t = 0 at 0 and π).
Recipes (8)
- Why a trig function needs its domain cut before it can have an inverse
- Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
- Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at , falls to −1 at and repeats every 2π.
- Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
- If it ever does, write the proof as a pair: two inputs with one shared output, such as sin() = sin() = . The function is not a one-to-one function, so on that domain it has no inverse function.
- To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−, ].
- Check the stretch: evaluate sine at its ends and its middle, sin(−) = −1, sin 0 = 0 and sin() = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.
- The inverse sine
- Turn the question into a sine question: y = arcsin x asks for the angle y from − to with sin y = x. The input x is a height; the answer y is an angle.
- Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
- Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
- Check the answer: it lies between − and , and its sine gives back x.
- The inverse cosine
- Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
- Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
- Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to . An input of 0 puts it straight up, at . A negative input puts it on the top-left quarter, so the answer is past , up to π.
- In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
- Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
- The inverse tangent
- Read arctan(a) as a question: which angle, strictly between − and , has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
- If a has a square root in its bottom, rewrite it to match the table: = .
- Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
- Find a in the tan θ column of the table and read the angle at the start of its row.
- Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between − and .
- Exact values by the sign and the quadrant
- Name the reference angle: cover any minus sign and find the special angle from 0 to whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
- Read the sign of the input: zero, positive or negative.
- Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−) for arcsin, the left end (π) for arccos.
- Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
- Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
- A function and its inverse undo each other, with conditions
- Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−, ] with that sine'.
- Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−, ] for arcsin, [0, π] for arccos, (−, ) for arctan.
- If the test passes, the two undo each other, and the answer is the number or angle you started with.
- If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
- If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan() does not, so arctan(tan()) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
- Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.
- Mixing the functions with a right triangle
- Say it in words and name the inside angle: cos(arcsin()) is the cosine of θ, where θ = arcsin(), so sin θ = .
- Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
- Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
- Label the two sides the input gives: a sine gives , a cosine gives , a tangent gives . A leg that points left or down is negative; the hypotenuse is always positive.
- Find the third side with ad + op = hy: take the positive square root, then give a leg the sign of the direction it points.
- Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.
- Inverse values on a calculator, and why one answer is not all the answers
- Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
- Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is ; degree mode shows 90.
- Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
- Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
- Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
- Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Traps (8)
- Why a trig function needs its domain cut before it can have an inverse
Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin() = sin() = still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−, ]. Say it to yourself: sine climbs the right side.
- The inverse sine
Answering with an angle outside the range. For arcsin(−) it is tempting to write or : both have sine −, but neither lies between − and . The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −. Before you write any arcsin answer, check that it lies in that stretch.
- The inverse cosine
Answering a negative input with a negative angle, the way the inverse sine does: arccos(−) = − is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past , up to π: here . Catch the slip by taking the cosine of what you wrote: cos(−) = +, the wrong sign.
- The inverse tangent
Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of , of and of −, and it is tempting to write the first one that comes to mind. Only the principal value, −, lies strictly between − and , so arctan(−1) = −. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.
- Exact values by the sign and the quadrant
The most common slip here is the right point with the wrong name. For arcsin(−) many people write , because the unit circle they learned runs from 0 to 2π. The point is right, but is not between − and , so it is not the principal value. Name the same point by turning clockwise: −. And , in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.
- A function and its inverse undo each other, with conditions
Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin()) = . Before you cancel, test the angle against the range of the outside inverse. is past = , so it fails; work from the inside instead: sin() = , then arcsin() = .
- Mixing the functions with a right triangle
Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: instead of − for tan(arccos(−)). Decide the quadrant before you draw anything.
- Inverse values on a calculator, and why one answer is not all the answers
The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.
Lesson 1 of 8
Why a trig function needs its domain cut before it can have an inverse
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
A function is a machine: one input goes in, one output comes out. An inverse function runs the machine backward: you hand it an output and it hands back the input. That can only work if no two inputs share an output. Picture a seat on a Ferris wheel. Its height above the hub works like the sine of the angle the wheel has turned. On every lap the seat passes most heights twice, once going up and once coming down, and the laps repeat forever. Hearing only that the seat is level with the hub, you cannot tell where it is. So everyone agrees to watch one stretch: the climb from the bottom to the top. On that climb, each height happens exactly once.
2 Picture it
Reminder
Reminder: What a function is, The vertical line test, Sine on the unit circle, The graph of sine, Reflecting over the line y = x, Square and round brackets, Full turns and negative angles, Comparing fractions of π, Squaring a negative number
- What a function is. Each input gets exactly one output: the angle goes in, and sin() = is the one height that comes out.
- The vertical line test. A graph is a function when no vertical line crosses it twice. A circle is not one: the vertical line through its center crosses it at the top and at the bottom.
- Sine on the unit circle. sin θ is the height, the y-coordinate, of the point at angle θ: at θ = the point is the top, (0, 1), so sin() = 1.
- The graph of sine. Angle across, height up: (0, 0), up to (, 1), down through (π, 0) to (, −1), back to (2π, 0), then the same wave again.
- Reflecting over the line y = x. Swap the two coordinates of each point: (, ) on the sine graph becomes (, ) on its mirror image.
- Square and round brackets. A square bracket keeps the end, a round one leaves it out: [−1, 1] contains −1 and 1, and (−1, 1) does not.
- Full turns and negative angles. Adding 2π is one more full turn and lands on the same point: + 2π = . A negative angle turns clockwise: − lands at the bottom, (0, −1).
- Comparing fractions of π. Give both the same bottom first: = , so is bigger than because 5 > 3.
- Squaring a negative number. A negative times a negative is positive: (−2 = (−2) · (−2) = 4, the same as = 4.
3 Why
An inverse sends each output back to the one input that made it. Sine breaks this: sin() and sin() are both , and adding 2π to either angle gives again. So would have to go back to infinitely many angles, and a machine with many answers to one question is not a function. The mirror shows it: flip the sine graph over the line y = x and a vertical line hits it again and again. We cannot change what sine does, so we change where we look: keep one stretch where sine never repeats yet still reaches every height from −1 to 1.
4 The rule
Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once.
A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−, ], where sin θ takes every value in [−1, 1] exactly once.
The same idea, five ways
On the angles from minus pi over two to pi over two, sine is one-to-one: it hits every height from minus one to one exactly once.
The sine function, restricted to the angles θ with − ≤ θ ≤ , is a one-to-one function whose outputs are all the numbers from −1 to 1.
- sin a = sin b only when a = b, for a and b in [−, ]
- outputs: −1 ≤ sin θ ≤ 1, that is [−1, 1]
- graph words: the rising arc from (−, −1) to (, 1)
Like agreeing to describe a Ferris wheel seat only on its climb up the right side, from the bottom to the top: then its height alone tells you exactly where it is.
The same idea, other ways
Draw the sine wave and slide a ruler, held flat, from the bottom of the wave to the top. At height it touches the wave at , , , and on forever: sine fails the horizontal line test. Now erase everything except the rising arc from (−, −1) to (, 1). Slide the ruler again: at every height from −1 to 1 it touches the arc exactly once.
You ride a Ferris wheel whose hub is at height 0 and whose seat is 1 unit from the hub, so your height is the sine of the angle the wheel has turned. On each lap you reach the height twice: once on the right side going up, at , and once on the left side coming down, at . A photo that shows only your height cannot tell those two moments apart. If everyone agrees to talk only about the climb up the right side, from the bottom to the top, each height names exactly one moment of the ride.
Look at the table of sine values: the output row holds three 0s, under the inputs 0, π and 2π. Three inputs, one output. A backward machine handed the number 0 would have three angles to choose from and no rule for choosing, so it could not be a function. On the kept piece [−, ], only θ = 0 still has height 0, because π and 2π are both bigger than .
Running a function backward is the same as reflecting its graph over the line y = x: each point (θ, height) becomes (height, θ). The points (, ) and (, ) become (, ) and (, ): one input, , with two outputs. The vertical line x = crosses the reflected graph more than once, so the reflection is not a function. The only way out is to keep fewer points: a piece of the graph where no two points share a height.
For a smooth wave like sine: if the graph turns around, going up and then down or down and then up, it fails the horizontal line test, because the heights near the turn are visited once on each side of it. So keep a stretch that runs from one turn to the next with no turn inside. For sine, the bottom at − and the next top at mark that stretch.
| Angles kept | Does a height repeat? | Heights reached | Can sine be run backward on all of [−1, 1]? |
|---|---|---|---|
| [0, 2π], one full lap | Yes: sin() = sin() = | No: heights repeat | |
| [0, π], the top half | Yes: sin() = sin() = | [0, 1] | No: heights repeat, and no negative heights |
| [0, ], a quarter lap | No | [0, 1] | No: no negative heights |
| (−, ), ends left out | No | No: −1 and 1 are missing | |
| from to , ends kept | No | It would work, but it is not the agreed piece | |
| [−, ], the right half | No | Yes: the agreed restricted domain |
5 How
- Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
- Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at , falls to −1 at and repeats every 2π.
- Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
- If it ever does, write the proof as a pair: two inputs with one shared output, such as sin() = sin() = . The function is not a one-to-one function, so on that domain it has no inverse function.
- To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−, ].
- Check the stretch: evaluate sine at its ends and its middle, sin(−) = −1, sin 0 = 0 and sin() = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.
Checking whether a piece of a graph can be run backward
- Write the piece as an interval of inputs, for example [0, π].
- Repeat check: look for a top or a bottom strictly inside the piece, or for two inputs with the same output. Either one means some horizontal line crosses twice.
- Coverage check: find the outputs at the two ends and at any top or bottom, then list every height the piece reaches. Compare that with every height the full function reaches; for sine that is [−1, 1].
- Ends check: if a needed height appears only at an end of the piece, that end must be kept, with a square bracket.
- Agreement check: among the pieces that pass, use the agreed one, so your answers match everyone else's. For sine it is [−, ].
6 Worked example
Worked example
Sine fails the test, and the kept piece passes
(a) Find two angles with the same sine, and use them to show that sine fails the horizontal line test.
(b) Show that on the angles − ≤ θ ≤ , sine takes every value in [−1, 1] exactly once.
Show the steps and the answer
- Say what part (a) asks: find one height that two different angles share. Say what part (b) asks: on the kept angles, show that no height repeats and that no height from to 1 is missing.A horizontal line at height h touches the sine graph at every angle whose sine is h, so a shared height is a horizontal line that touches twice.
- Start with the special angle . Its point on the unit circle is , so .Sine is the height, the y-coordinate, of the point on the unit circle, and is the 30° special angle.
- Mirror that point across the vertical axis: becomes . This new point stops short of the half turn , so its angle is .A mirror across the vertical axis keeps the height and swaps right for left. To subtract, write π as so both fractions have the bottom 6.
- So as well: the horizontal line touches the sine graph at and at .Both points have the same height, .
- Answer (a): two different angles share the output , so sine fails the horizontal line test and is not a one-to-one function.The test fails as soon as one horizontal line touches twice, so one pair is a complete proof.
- It is worse than two: lands on the same point, so too, and every further full turn adds another angle.2π is one full turn, and a full turn ends where it started.
- For (b), place the kept angles on the circle: is the bottom, ; is the right end, (1, 0); is the top, (0, 1).− is a quarter turn clockwise from (1, 0), and is a quarter turn counterclockwise.
- As grows from to , the point travels up the right half of the circle, from the bottom to the top. Its height climbs the whole way.On the right half each counterclockwise step lifts the point; the height starts to fall only after the top, and the top is where the piece ends.
- No repeats: a height that only climbs never returns to a value it already had, so every horizontal line touches the kept piece at most once.That is what passing the horizontal line test means.
- Nothing missing: the height moves smoothly from up to 1, so it passes through every value in between, and the square brackets keep both ends, where the heights are and 1.Like an elevator riding from the lowest floor to the highest: it passes every level on the way, and both end floors are part of the ride.
- Look back at the pair from (a): is in the kept piece, but is not, because and is bigger than . The cut threw the duplicate away.To compare fractions of π, give them the same bottom and compare the tops: 5 > 3.
- (a) sin() = sin() = , so the line y = crosses the sine graph twice: sine fails the horizontal line test.
- (b) On [−, ] the height climbs from −1 to 1 without turning back, so each value in [−1, 1] is taken exactly once.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: A hill that fails the horizontal line test, and where to cut it
The figure shows the graph of f(x) = −(x − 1 + 3, a hill whose top is the point (1, 3). Does f pass the horizontal line test? If not, give two inputs with the same output to prove it. Then choose which inputs to keep so that f passes the test and still reaches every height it reached before.
Show the steps and the answer
- Say in plain words what is asked: can f be run backward? For that, each output must come from only one input.An inverse function takes each output back to the input it came from. If one output comes from two inputs, there is no single input to go back to, so there is no inverse function.
- Picture the graph with inputs across and outputs up. Write . The square is never negative and is 0 only at . So f(x) is never above 3 and equals 3 only at . The graph is a hill: it climbs to its top (1, 3), turns, and falls. Far out on either side it drops below any height you name. So the heights f reaches are all .Inputs the same distance left and right of 1, such as 0 and 2, give the same square. So the two sides of the hill are mirror images. Sine's wave does the same: it climbs to 1 at and then comes back down through the same heights.
- Slide a horizontal line from the bottom of the picture to the top. Every height below 3 meets the hill twice, once on the climb and once on the fall. The height 3 meets it once, at the top. Heights above 3 miss it.The horizontal line test fails as soon as a single height is touched at two or more points.
- Write the proof as a pair, using the height 2: and , so .Two inputs with one shared output are a complete proof. The line y = 2 crosses the graph at (0, 2) and at (2, 2), so f is not a one-to-one function. On all real numbers it has no inverse function.
- Cut the domain the way sine is cut: keep a stretch of inputs with no turn inside it that still reaches every output. The only turn is the top at . So keep the climb up to and including the top: , the interval .With no turn inside, the graph only rises, so it never comes back to a height it already had. Keeping x = 1 keeps the top height 3. The climb has no bottom, so no height below 3 is lost. The fall, x ≥ 1, works just as well. The climb is chosen to match sine's piece [−, ], which also climbs up to its top.
- Check the stretch. Evaluate at its end and at points to its left: and . Moving right, the outputs , 2, 3 only go up. Slide the horizontal line again over this half of the hill: every height now touches it exactly once.For x ≤ 1, moving right brings x closer to 1. So (x − 1 shrinks and f(x) = 3 − (x − 1 grows, and no height repeats. The graph rises from below any height you name up to 3, so every height y ≤ 3 is reached. Both checks pass, so f on (−∞, 1] is a one-to-one function and has an inverse function.
Work to write
- f(0) = −(0 − 1 + 3 = 2 and f(2) = −(2 − 1 + 3 = 2, so f(0) = f(2) = 2
- One output comes from two inputs, so the line y = 2 crosses the graph twice: f fails the horizontal line test, is not one-to-one, and has no inverse function on all real numbers
- The only turn is the top (1, 3), so keep x ≤ 1, the interval (−∞, 1] (keeping x ≥ 1, the interval [1, ∞), is also correct)
- Check: f(−2) = −6, f(−1) = −1, f(0) = 2, f(1) = 3, rising all the way up to the top (for x ≥ 1: f(1) = 3, f(2) = 2, f(3) = −1, f(4) = −6, falling all the way)
- On the kept piece each height y ≤ 3 is reached exactly once, so f is one-to-one there and has an inverse function
Rung 2 of 7
Rung 2: one height, three angles
Find every angle θ from 0 to 2π, ends included, with sin θ = 0. What does the answer say about sine and the horizontal line test?
Show the steps and the answer
- Say what it asks: the output is 0; find every input that gives it. This finds every place where the line touches the sine graph, so you can count them.Solving sin θ = 0 reads the graph backward, from a height to the angles.
- On the unit circle, height 0 means the point lies on the horizontal axis: at (1, 0) or at .Sine is the y-coordinate, and y = 0 only on the horizontal axis.
- (1, 0) is the point for and, after a full turn, for . is the point for .0 is the starting point, π is a half turn, and 2π is a full turn back to the start.
- Plug each one back in: .Each of those points has y-coordinate 0.
- Three angles share one height, so the line touches the sine graph three times: sine fails the horizontal line test.Passing allows at most one touch for every horizontal line.
- θ = 0, π, 2π
- Sine fails the horizontal line test.
Rung 3 of 7
Rung 3: half a lap, the top half of the circle
Suppose you keep only the angles in [0, π], the top half of the unit circle. On that piece, does any height repeat? Is every height from −1 to 1 reached?
Show the steps and the answer
- Say what it asks: on the angles from 0 to only, check for repeated heights, then for missing heights.A piece can be the domain of an inverse sine that answers every height from −1 to 1 only if no height repeats and none of those heights is missing.
- Check one height: and , and both angles lie in . is positive, and is less than , which is π.
- So the line still touches the piece twice: heights repeat.Two angles in the piece share one height.
- Now the heights reached: from 0 to the point stays on the top half of the circle, rising from (1, 0) to the top, (0, 1), and coming back down to . Every height is between 0 and 1, so the piece reaches [0, 1].Every point on the top half has a y-coordinate of 0 or more, and the highest one is the top, at height 1.
- A negative height such as is never reached.No point on the top half lies below the horizontal axis.
- Heights repeat: sin() = sin() = .
- Only the heights in [0, 1] are reached.
- The piece [0, π] does not work for sine.
Rung 4 of 7
Rung 4: a quarter lap, nothing repeated, something missing
On the angles in [0, ], does any height repeat? Is every height from −1 to 1 reached?
Show the steps and the answer
- Say what it asks: run the same two checks, repeats and missing heights, on the quarter lap from 0 to .A usable piece must pass both.
- From 0 to the point moves from (1, 0) up to the top, (0, 1), through the first quadrant, rising the whole way.In the first quadrant each counterclockwise step lifts the point.
- The height climbs from to and never comes back down, so no height repeats.A height that only climbs cannot return to an earlier value.
- But every height on this piece is between 0 and 1. The height , for example, is never reached.Points in the first quadrant have a y-coordinate of 0 or more.
- So a backward machine built on this piece would have no angle to hand back for : the piece has no repeats but is too short.An inverse sine that answers every height from −1 to 1 needs an angle for each of them.
- No height repeats.
- Only the heights in [0, 1] are reached, so every negative height is missing.
- Sine on [0, ] can be run backward, but only for heights from 0 to 1, so it cannot be the piece for an inverse sine that answers every height from −1 to 1.
Rung 5 of 7
Rung 5: the right climb with its ends left out
On the angles in (−, ), with round brackets, is every height from −1 to 1 reached?
Show the steps and the answer
- Say what it asks: the round brackets leave out both ends. Does leaving them out lose any height?A round bracket means that end is not in the piece.
- Height 1 belongs only to the top of the circle, (0, 1), which is the point for .The top is the only point on the unit circle with y-coordinate 1.
- is an end, and the round bracket leaves it out. Any other angle at the top is a full turn away, such as , which is below and so outside the piece.Taking away a full turn, 2π, lands on the same point; to subtract, write 2π as .
- In the same way, height belongs only to the bottom, , the point for , and that end is left out too.The bottom is the only point with y-coordinate −1, and every other angle that lands there is a full turn away from −, outside the piece.
- So the heights reached are all the numbers strictly between and 1, that is . The heights and 1 are missing.The climb never arrives at its own ends.
- Fix it by closing the brackets: .Square brackets keep the ends, and with them the heights −1 and 1.
- No: the heights reached are (−1, 1), so −1 and 1 are missing.
- Closing the brackets, [−, ], fixes it.
Rung 6 of 7
Rung 6: the agreed piece passes both checks
Show that on [−, ] sine repeats no height and reaches every height from −1 to 1.
Show the steps and the answer
- Say what it asks: run the same two checks on the closed piece from to .This is the piece that will be used, so it must pass both.
- Evaluate the ends and the middle: .The points are the bottom, (0, −1), the right end, (1, 0), and the top, (0, 1).
- Between them the point climbs the right half of the circle, through the fourth quadrant and then the first, rising the whole time.On the right half each counterclockwise step lifts the point.
- No repeats: the height only climbs.A climbing height never returns to an earlier value.
- Nothing missing: the height moves smoothly from to 1, and the square brackets keep both ends, so every height in is reached, each exactly once.A smooth climb from −1 to 1 passes through every value in between, and the two ends supply −1 and 1.
- No height repeats, and every height in [−1, 1] is reached exactly once.
- This is the restricted domain for sine: [−, ].
Rung 7 of 7
Rung 7: another piece that works, and why it is not the one used
Check the angles from to , ends included: the left half of the circle. Do they pass both checks? Then explain why [−, ] is the piece everyone uses instead.
Show the steps and the answer
- Say what it asks: run the two checks on a second piece, then explain a choice between two pieces that both pass.More than one piece can work, so the question is why one of them is chosen.
- Ends and middle: at the top, at the left end, , and at the bottom, .Sine is the y-coordinate of each of those points.
- Between them the point moves down the left half of the circle, from the top to the bottom, and its height falls the whole time.On the left half each counterclockwise step lowers the point.
- So no height repeats, and every height from 1 down to is reached once: this piece passes both checks.A height that only falls cannot repeat, and a smooth fall from 1 to −1 passes every value between, with both ends kept.
- Compare the two pieces. contains 0 and the first-quadrant special angles and . The left piece contains none of them, not even 0.Every angle in the left piece is at least , and 0, , and are all smaller than .
- For those reasons mathematicians agreed on . The choice is a convention, and what matters most is that everyone uses the same piece.If two people used different pieces, running sine backward would give them different angles for the same height, and both would think they were right.
- Yes: from to sine falls from 1 to −1 with no repeats, so this piece would work.
- The agreed piece is [−, ], because it contains 0 and the small positive special angles, and one agreed piece means one answer for everyone.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: a vertical line asks whether it is a function (each x has one y); a horizontal line asks whether it can run backward (each y has one x).
- Memory cue for the piece: sine climbs the right side. Picture the right half of the unit circle, from the bottom at − to the top at .
- Check any piece in ten seconds: find sine at its two ends and its middle. For [−, ] you get −1, 0, 1, climbing in order with no top or bottom in between.
- To show on paper that a function fails the horizontal line test, write one pair of inputs with the same output, such as sin() = sin() = . One pair is a complete proof.
- Rebuild, do not memorize: draw the unit circle, trace the right half from the bottom to the top, and you have the piece [−, ] and the heights [−1, 1].
- Cosine and tangent repeat too, so each needs its own cut, chosen by the same two checks: no repeats, nothing missing.
7 The trap
Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin() = sin() = still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−, ]. Say it to yourself: sine climbs the right side.
Flash cards
Say the answer out loud, then flip.
Why must a trig function have its domain cut before it can have an inverse function?
What does the horizontal line test tell you about a function?
- Whether it has an inverse function.
- Pass: no horizontal line crosses the graph more than once, so it is a one-to-one function and has an inverse.
- Fail: some line crosses two or more times, so two inputs share an output and, on that domain, there is no inverse.
What restricted domain does sine get, and why does that stretch work?
- Like a Ferris wheel seat climbing from the bottom to the top, sine rises there without turning back, from sin(−) = −1 to sin() = 1, so each height from −1 to 1 happens exactly once.
Why is [0, π] the wrong piece of sine to keep?
- On [0, π] sine climbs and then falls, so heights repeat: and both give .
- It also never goes below 0, so negative outputs such as −1 are never reached.
Lesson 2 of 8
The inverse sine
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Sine takes an angle and gives back a height. Picture a Ferris wheel with radius 1. Your seat starts level with the hub, on the right. Turn the wheel through an angle, and sine tells you your height: above the hub is positive, below is negative. The inverse sine asks the reverse question: your seat is at height , so how far did the wheel turn? The catch: every lap passes that height twice, once rising and once falling. So everyone agrees to use only the right side, from straight down to straight up, counting a downward turn as negative. There, each height from −1 to 1 shows up exactly once. That one angle is the answer, called the principal value.
2 Picture it
Reminder
Reminder: Sine is a height, The five special sines, Negative angles turn clockwise, Coterminal angles, Radians to degrees, Square brackets include the end, Sizing up a root, Rationalizing, Adding fractions of π
- Sine is a height. On the unit circle, sin θ is the y-coordinate, the height, of the point at angle θ. Example: the point at is (0, 1), so sin = 1.
- The five special sines. sin 0 = 0, sin = , sin = , sin = , sin = 1. Memory device: the tops count , , , , , always over 2.
- Negative angles turn clockwise. − is a 30° turn clockwise from the positive x-axis. It lands at the mirror image of the point across the x-axis: same distance across, opposite height, so sin(−) = −.
- Coterminal angles. Angles that differ by a full turn, 360° or 2π, end at the same point and have the same sine. Example: −60° + 360° = 300°, so − and name one point.
- Radians to degrees. π = 180°, so divide 180° by the bottom: = 30°, = 45°, = 60°, = 90°.
- Square brackets include the end. [−1, 1] means every number from −1 to 1, both ends included. Example: 1 is in it, 1.5 is not.
- Sizing up a root. ≈ 1.414 and ≈ 1.732, so ≈ 0.707 and ≈ 0.866: both between 0 and 1.
- Rationalizing. = · = . Multiplying by , which is 1, changes the look, not the value.
- Adding fractions of π. Give both the same bottom first: − + = − + = −.
3 Why
An inverse must give one answer, and sine repeats, so we use sine only on its restricted domain [−, ]. There sine climbs from −1 to 1 and passes the horizontal line test: each height comes from exactly one angle, so the reverse is a function. This piece is a convention, chosen because it holds the first-quadrant angles and is centered at 0, so the answer for − is the answer for with a minus sign. If everyone picked a different piece, answers would disagree. The domain is [−1, 1] because no point on the unit circle sits above 1 or below −1.
4 The rule
arcsin x, also written x, means and .
Domain: . Range: , which is to .
The same idea, five ways
Say “y is the inverse sine of x” or “y is the arcsine of x” (ARK-sine). Read x aloud as “inverse sine of x”, not “sine to the minus one”.
y is the angle from − to , ends included, whose sine is x.
- y = arcsin x
- y = x, the same thing; the −1 is a label, not a power
- sin y = x and − ≤ y ≤
- domain: −1 ≤ x ≤ 1, that is [−1, 1], that is {x | −1 ≤ x ≤ 1}
- range: − ≤ y ≤ , that is [−, ], or −90° ≤ y ≤ 90° in degrees
- graph: the piece of y = sin x from (−, −1) to (, 1), mirrored across the line y = x; it rises from (−1, −) through (0, 0) to (1, )
A Ferris wheel of radius 1: from your seat's height, say how far the wheel turned, counting only the right side, from straight down to straight up.
The same idea, other ways
Draw the unit circle and cover its left half. What remains runs from the bottom, at −, through the right end, at 0, up to the top, at . Climbing this half, the height rises from −1 to 1 and passes each value once. To find arcsin x, slide along the half to the point at height x and read its angle: positive above the x-axis, negative below.
The hour hand of a clock points at 3 at three in the morning, at three in the afternoon, and again every day after. Told only that the hand points at 3, you cannot know which time it was, so people agree on a rule: give this morning's time. The inverse sine works the same way. Many angles have sine : , , and more. The rule “give the angle from − to ” picks . That chosen answer is the principal value.
Read sine facts backward, keeping only angles from − to . In the table, the top row holds heights and the bottom row holds angles. The highlighted column under says arcsin() = , because sin = . The column under − holds −: same size, opposite sign. The two end columns are the bottom and the top of the circle.
Input between 0 and 1: the angle is in the first quadrant. Input between −1 and 0: the angle is in the fourth quadrant, written as a negative angle such as −, never as . Zero in, zero out; 1 in, out, straight up; −1 in, − out, straight down. The answer is never in the second or third quadrant, because those make up the left half of the circle. An input above 1 or below −1 has no answer at all.
A machine can be run backward only if each output came from exactly one input; otherwise, handed an output, you could not say which input made it. Sine on all angles fails this: and both give . On the restricted domain from − to , sine is a one-to-one function: its heights only go up, so no height repeats. Turn every arrow around and you get a function, the inverse sine. Its inputs are the old outputs, heights from −1 to 1, and its outputs are the old inputs, angles from − to .
| x, a height | arcsin x | in degrees | the turn from the right end |
|---|---|---|---|
| a quarter turn clockwise | |||
| 60° clockwise | |||
| 45° clockwise | |||
| 30° clockwise | |||
| 0 | 0 | 0° | no turn |
| 30° | 30° counterclockwise | ||
| 45° | 45° counterclockwise | ||
| 60° | 60° counterclockwise | ||
| 1 | 90° | a quarter turn counterclockwise |
5 How
- Turn the question into a sine question: y = arcsin x asks for the angle y from − to with sin y = x. The input x is a height; the answer y is an angle.
- Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
- Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
- Check the answer: it lies between − and , and its sine gives back x.
Exact values of arcsin x
- Check that −1 ≤ x ≤ 1. If not, write undefined and stop.
- Drop the sign of x for now. If the positive version looks unfamiliar, rewrite it: 0.5 = , = .
- Name the angle from 0 to with that sine: sin 0 = 0, sin = , sin = , sin = , sin = 1.
- Put the sign back. If x is positive or 0, the angle from the last step is the answer. If x is negative, the answer is that angle with a minus sign: the same turn made clockwise, which lands below the x-axis where heights are negative.
- Check: the answer lies between − and , and its sine equals x.
6 Worked example
Worked example
An exact value with a negative input
Evaluate arcsin(−) exactly.
Show the steps and the answer
- Say what it asks: the input is a height. Find the one angle from to whose sine is .That is the definition of arcsin: the angle on the right half of the unit circle at the given height.
- Check the input: , so , which is between and 1.Heights on the unit circle run from −1 to 1, so this check tells you an answer exists.
- Drop the minus sign for a moment. The angle from 0 to with sine is , which is .The point at is (, ), so its height is .
- Put the sign back. The height is negative, so the point is below the x-axis on the right half: make the same turn clockwise, .The point at − is the mirror image of the point at across the x-axis: same distance across, opposite height.
- Confirm the range: , so is between and .arcsin answers only with angles in that stretch, and on a number line −90 sits to the left of −60.
- Set aside () and (). Both have sine , but both are bigger than . is on the left half; is the same point as −, reached the long way around, so it is outside the range.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: the top of the circle
Evaluate arcsin(1).
Show the steps and the answer
- Say what it asks: the input 1 is a height. Find the angle from to whose sine is 1.arcsin x always means the angle in that stretch whose sine is x.
- Check the input: 1 is in .The square bracket at 1 means the end itself is allowed.
- Find the point at height 1: the top of the circle, (0, 1), a quarter turn counterclockwise, at the angle .A circle of radius 1 reaches 1 unit above its center only at the very top.
- Confirm the angle is in the range: is the top end of , and that end is included.The range is written with square brackets too.
Rung 2 of 7
Rung 2: a special height above the axis
Evaluate arcsin().
Show the steps and the answer
- Say what it asks: find the angle from to whose sine is .The input is a height, and arcsin returns the angle on the right half at that height.
- Check the input: , which is between and 1.Heights on the unit circle never go above 1 or below −1, so an answer exists.
- The input is positive, so look in the upper right quarter. The point at () is , so its height is .In the 30-60-90 triangle with hypotenuse 1, the side across from the 30° angle is .
- Set aside (). Its sine is also , but it is bigger than . is on the left half of the circle, outside the range, and arcsin gives only the one answer in its range.
Rung 3 of 7
Rung 3: the answer in degrees
Evaluate arcsin() and give the answer in degrees.
Show the steps and the answer
- Say what it asks: find the angle from to whose sine is , written in degrees.The range from − to is the same stretch as −90° to 90°, since π = 180°.
- Check the input: , so , which is between and 1.An answer exists only for heights from −1 to 1.
- The input is positive, so look in the upper right quarter. The point at is , so its height is .In the 45-45-90 triangle with hypotenuse 1, each leg is .
- Write the angle in degrees: .The question asks for degrees; in radians the same angle is , since 180° ÷ 4 = 45°.
Rung 4 of 7
Rung 4: the first negative input
Evaluate arcsin(−).
Show the steps and the answer
- Say what it asks: find the angle from to whose sine is .That is what arcsin means.
- Check the input: , which is between and 1.So an answer exists.
- Drop the sign for a moment: the angle from 0 to with sine is .The point at is (, ).
- Put the sign back: the height is negative, so the point is below the x-axis on the right half. Make the same turn clockwise: .The point at − is the mirror image of the point at across the x-axis, so its height is −.
- Set aside and . Both have sine , but both are bigger than . is on the left half; is the same point as −, reached the long way around, and the range allows only the short clockwise name.
Rung 5 of 7
Rung 5: the inverse notation and a root in the bottom
Evaluate (−).
Show the steps and the answer
- Read the notation: is the inverse sine, arcsin. The question is: which angle from to has sine ?The −1 on sin is the inverse label, not a power, so this is not one over sine.
- Rewrite the input: , so the input is .Multiplying by , which equals 1, changes the look, not the value, and · = 2. Now the input matches a special height.
- Check the input: , which is between and 1.So an answer exists.
- Drop the sign: the angle from 0 to with sine is .The point at is (, ).
- Put the sign back: .A negative height puts the point below the x-axis on the right half: the same turn, made clockwise.
Rung 6 of 7
Rung 6: a look-alike input that is not allowed
Evaluate arcsin().
Show the steps and the answer
- Say what it asks: find the angle from to whose sine is .That is what arcsin means.
- Check the input: , and 1.5 > 1.The domain is [−1, 1], so 1.5 is outside it.
- Stop and write undefined.No point on the unit circle has height 1.5; the highest point is at height 1, so no angle has sine .
- Do not confuse it with , whose arcsin is .The root sign makes the top about 1.732 instead of 3, which keeps the number below 1.
Rung 7 of 7
Rung 7: two values in one expression
Evaluate arcsin(−) + arcsin() exactly.
Show the steps and the answer
- Say what it asks: find each inverse sine on its own, then add the two angles.Each arcsin is a number, an angle. Add the angles, not the inputs: − + ≈ −0.366 is a height between − and 0, so its angle lies between −30° and 0°, a different number.
- First value: arcsin.sin = , and a negative input gives the same turn made clockwise.
- Second value: arcsin.sin = , and is in the range.
- Add: .Fractions add once they share a bottom: = , and −2 sixths of π plus 1 sixth of π is −1 sixth of π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: sine climbs the right side. Every arcsin answer sits on the right half of the unit circle, from −90° at the bottom to 90° at the top.
- Check every answer twice: the sine of your angle must give back the input, and the angle must lie between − and . If either check fails, the answer is wrong.
- Sign shortcut: a positive input gives a positive angle; a negative input gives the negative of the same angle. arcsin(−) = −arcsin() = −.
- Do not memorize the table of nine values. Rebuild it in ten seconds from the five special sines and the sign shortcut.
- Write exact answers such as −, not decimals such as −1.047, and use radians unless the problem uses degrees.
- Say x out loud as “inverse sine of x” or “arcsine of x”, never “sine to the minus one”. Saying it right keeps you from reading it as one over sine.
7 The trap
Answering with an angle outside the range. For arcsin(−) it is tempting to write or : both have sine −, but neither lies between − and . The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −. Before you write any arcsin answer, check that it lies in that stretch.
Flash cards
Say the answer out loud, then flip.
In y = arcsin x, which letter is the height and which is the angle?
- x, the input, is the height: how far your Ferris wheel seat sits above or below the hub.
- y, the answer, is the angle: how far the wheel turned to put your seat there, always from − to .
- In symbols: sin y = x.
Why is arcsin 2 undefined?
Why does the inverse sine answer only with angles from − to ?
What is arcsin(−)?
- −, which is −60°. A negative height puts your seat below the hub, so the wheel turned down: a negative angle.
- Check: sin(−) = −, and − lies between − and .
- Not or : they have the same sine but lie outside that stretch.
Lesson 3 of 8
The inverse cosine
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom. Number that edge −1 at the left end, 0 in the middle and 1 at the right end. Pick a spot on the edge, look straight up to the curved rim and read the angle there. Each spot lines up with exactly one angle, from 0° at the right end to 180° at the left. That is the inverse cosine. Cosine takes an angle and tells you how far left or right its point on the unit circle sits. The inverse cosine runs backward: give it the left-right position, and it hands back the one angle on the top half of the circle with that position.
2 Picture it
Reminder
Reminder: Cosine is the x-coordinate, Signs by quadrant, Mirror across the vertical axis, Degrees to radians, Square brackets include the end, The horizontal line test, The inverse sine's range, Rough sizes of , and π, Subtracting a negative, Fractions over a common bottom
- Cosine is the x-coordinate. The point at angle θ on the unit circle is (cos θ, sin θ): the 60° point is (, ), so cos 60° = and sin 60° = .
- Signs by quadrant. Left of the vertical axis every x-coordinate is negative, so cosine is negative in quadrant II: cos 150° = −.
- Mirror across the vertical axis. Reflecting a point across the vertical axis keeps its height, flips the sign of its x-coordinate, and turns the angle θ into 180° − θ: the 60° point (, ) becomes the 120° point (−, ).
- Degrees to radians. Multiply by and reduce: 120° × = = .
- Square brackets include the end. [0, π] contains 0 and π themselves, so arccos 1 = 0 and arccos(−1) = π are allowed answers.
- The horizontal line test. A function can be run backward only if no horizontal line crosses its graph twice: y = fails, since the line y = 4 crosses it at x = −2 and at x = 2.
- The inverse sine's range. arcsin x answers from − to , the right half of the circle, so a negative input gives a negative angle: arcsin(−) = −.
- Rough sizes of , and π. ≈ 1.41, ≈ 1.73 and π ≈ 3.14, all rounded, so ≈ 0.71, ≈ 0.87 and ≈ 1.57.
- Subtracting a negative. Subtracting a negative is adding the positive: 5 − (−2) = 5 + 2 = 7, and − (−) = + .
- Fractions over a common bottom. With matching bottoms, add the tops: + = = π. If the bottoms differ, multiply top and bottom to match first: = .
3 Why
Why not reuse the inverse sine's right half, from − to ? There the left-right position is never negative, so arccos(−) would have no answer, and positions repeat: − and both sit at . Over the top half, from 0 to π, the position slides from 1 down to −1 without turning back, so each number from −1 to 1 appears exactly once, passing the horizontal line test. The bottom half would work too. The top is the convention because it starts at 0 and puts inputs between 0 and 1 in the first quadrant, as right triangles do; calculators follow it, so another half would disagree with them.
4 The rule
The inverse cosine (arccos) is the inverse function of cosine on the restricted domain .
So arccos x, also written x, means and .
Domain of arccos: . Range of arccos: .
The same idea, five ways
Say arc cosine of x, inverse cosine of x, or cosine inverse of x. All three mean the angle whose cosine is x.
y is the inverse cosine of x when y is the angle from 0 to π, both ends included, whose cosine is x.
- y = arccos x
- cos y = x and 0 ≤ y ≤ π
- Domain: −1 ≤ x ≤ 1, written [−1, 1] or {x | −1 ≤ x ≤ 1}
- Range: 0 ≤ y ≤ π, written [0, π] or {y | 0 ≤ y ≤ π}
A protractor: pick a spot on its straight edge, look straight up, and read the one angle on the curved rim above that spot.
The same idea, other ways
Draw the unit circle and keep only its top half. Find the input on the horizontal axis, go straight up until you meet the circle, and the angle to that point is the answer. For the input you meet the point at 60°, so arccos = . For any input strictly between −1 and 1, going up you meet the circle once and going down you would meet a second point, which is why the bottom half is left out. At 1 and −1 the two halves touch, so there is only the one point.
Think of a fuel gauge whose needle swings over the top of its dial, from pointing straight right to pointing straight left, and never dips below its pivot. If someone tells you only how far left or right the tip of the needle is, you can still name the exact reading, because the needle passes over each left-right spot once. A clock hand does not work this way: it goes all the way around, and the hand pointing at 2 sits exactly as far right as the hand pointing at 4.
Walk along the top half and watch the cosine. In the table picture, the output row falls steadily from 1 down to −1 and never repeats a number, so cosine on the top half is a one-to-one function. That means you can read the table backward, from an output up to its input, and always get one answer: the highlighted − points up to .
Try the inverse sine's half, the right side from − up to . Every point there sits on or to the right of the vertical axis, so every cosine there is 0 or more: no angle on that half has cosine −. Also, the points at − and sit at the same left-right position, , so cosine on that half reaches twice and cannot be run backward. The top half fixes both problems at once.
Between 0 and 1 in, first quadrant out; 1 in, 0 out. Zero in, out. Between −1 and 0 in, second quadrant out; −1 in, π out. The answer is never negative and never more than π, which is about 3.14, and an input above 1 or below −1 has no answer.
| input x | arccos x | the same angle in degrees | arcsin x, for contrast |
|---|---|---|---|
| 1 | 0 | 0° | |
| 30° | |||
| 45° | |||
| 60° | |||
| 0 | 90° | 0 | |
| 120° | |||
| 135° | |||
| 150° | |||
| π | 180° |
5 How
- Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
- Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
- Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to . An input of 0 puts it straight up, at . A negative input puts it on the top-left quarter, so the answer is past , up to π.
- In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
- Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
Finding arccos x exactly
- Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.
- Sign check: a positive input lands on the top-right quarter, 0 lands straight up at , a negative input lands on the top-left quarter.
- Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.
- Test the answer: its cosine equals the input, and it lies from 0 to π.
6 Worked example
Worked example
A negative input: arccos(−)
Find the exact value of arccos(−). In words: the input is −; find the one angle from 0 to π whose cosine is −.
Show the steps and the answer
- Check the input: is between and 1.Only numbers from −1 to 1 are left-right positions on the unit circle, so only they have an inverse cosine.
- Turn the question into a picture: find the point on the top half of the unit circle whose x-coordinate is .The cosine of an angle is the x-coordinate of its point, and the inverse cosine answers only with angles from 0 to π, which sweep the top half.
- The input is negative, so look on the top-left quarter, past .Left of the vertical axis every x-coordinate is negative, and the top-left quarter is the part of the top half that lies there.
- Start from the positive twin: the point is , so .60° is the special angle whose point sits to the right of center.
- Mirror that point across the vertical axis: it becomes , at .The mirror keeps the height, flips the sign of the x-coordinate, and turns 60° into 180° − 60°, which lands in the top-left quarter as required.
- Convert to radians: .π radians is 180°, and 120 over 180 reduces to 2 over 3 when you divide top and bottom by 60.
- Write the answer: arccos. lies from 0 to π and its cosine is −, which is exactly what the definition asks for.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 8
Rung 1: almost trivial, arccos 1
Evaluate arccos 1. In words: the input is 1; find the angle from 0 to π whose cosine is 1.
Show the steps and the answer
- Check the input: 1 is in .The square bracket at 1 means 1 itself is included.
- Find the point on the top half whose x-coordinate is 1.Cosine is the x-coordinate of the point on the unit circle.
- The only such point is (1, 0), at the far right, where you have not turned at all: the angle is 0.The circle has radius 1, so it reaches x = 1 at one point only, the starting point of every angle.
Rung 2 of 8
Rung 2: a positive input, arccos
Evaluate arccos . In words: the input is ; find the angle from 0 to π whose cosine is .
Show the steps and the answer
- Check the input: (rounded), which is between and 1. ≈ 1.73, and half of that is about 0.87.
- The input is positive, so look on the top-right quarter, from 0 up to .Right of the vertical axis every x-coordinate is positive.
- The special point there with x-coordinate is the point, .Small angle, big x: a small turn leaves the point far to the right, so 30° has the bigger x-coordinate , while 60° has .
- Convert to radians: .30 over 180 reduces to 1 over 6 when you divide top and bottom by 30.
Rung 3 of 8
Rung 3: the middle, arccos 0
Evaluate arccos 0. In words: the input is 0; find the angle from 0 to π whose cosine is 0.
Show the steps and the answer
- Check the input: 0 is between and 1.0 is the middle of the domain [−1, 1].
- Find the point on the top half whose x-coordinate is 0: it is (0, 1), straight up.An x-coordinate of 0 means neither left nor right of center, and on the top half that is the very top.
- Straight up is a quarter turn: , which is .A full turn is 2π, and a quarter of 2π is = .
Rung 4 of 8
Rung 4: the left end, arccos(−1)
Evaluate arccos(−1). In words: the input is −1; find the angle from 0 to π whose cosine is −1.
Show the steps and the answer
- Check the input: is in .The square bracket at −1 means −1 itself is included.
- Find the point on the top half whose x-coordinate is : it is , at the far left.The circle has radius 1, so it reaches x = −1 at one point only, the far left.
- Reaching the far left takes a half turn: , which is .A half turn is half of 2π.
Rung 5 of 8
Rung 5: a negative input, arccos(−)
Evaluate arccos(−). In words: the input is −; find the angle from 0 to π whose cosine is −.
Show the steps and the answer
- Check the input: (rounded), which is between and 1. ≈ 1.41, and half of that is about 0.71.
- The input is negative, so look on the top-left quarter, past .Left of the vertical axis every x-coordinate is negative.
- Start from the positive twin: the point is .45° is the special angle whose x-coordinate is .
- Mirror it across the vertical axis: , at .The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
- Convert to radians: .135 over 180 reduces to 3 over 4 when you divide top and bottom by 45.
Rung 6 of 8
Rung 6: the look-alike, arccos(−)
Evaluate arccos(−). In words: the input is −; find the angle from 0 to π whose cosine is −.
Show the steps and the answer
- Check the input: (rounded), which is between and 1. ≈ 1.73, and half of that is about 0.87.
- The input is negative, so look on the top-left quarter, past .Left of the vertical axis every x-coordinate is negative.
- Start from the positive twin: the point is .Small angle, big x: of 30° and 60°, the smaller angle has the bigger x-coordinate, .
- Mirror it across the vertical axis: , at .The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
- Convert to radians: .150 over 180 reduces to 5 over 6 when you divide top and bottom by 30.
Rung 7 of 8
Rung 7: an input that looks like an angle, arccos()
Evaluate arccos(). In words: the input is the number ; find the angle from 0 to π whose cosine is .
Show the steps and the answer
- Remember what the input is: a cosine value, a left-right position, even though looks like an angle.The inverse cosine takes a position in and gives an angle out.
- Check the input: (rounded), which is more than 1.π ≈ 3.14, and half of that is about 1.57.
- Stop: arccos() is undefined.Every point on the unit circle has its x-coordinate from −1 to 1, so no angle has cosine 1.57.
Rung 8 of 8
Rung 8: both inverses at once, arccos(−) − arcsin(−)
Evaluate arccos(−) − arcsin(−). In words: find each angle, then subtract the second from the first.
Show the steps and the answer
arccos(−) = , on the top half
arcsin(−) = −, on the right half
- Find arccos(): the input is negative, so the point is on the top-left quarter, at , which is .The inverse cosine answers on the top half, and the 135° point is (−, ).
- Find arcsin(): the input is negative, so the point is on the lower part of the right half, at , which is .The inverse sine answers on the right half, from − to , and the −45° point is (, −), whose height, the sine, is −.
- Notice that one input gave two different angles, and .The two functions answer on different halves: the inverse sine on the right side, the inverse cosine on the cap.
- Rewrite the subtraction: .Subtracting a negative is adding the positive.
- Add: .The bottoms match, so add the tops: 3π + π = 4π, and 4π over 4 is π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: Sine takes the Side, Cosine takes the Cap. Inverse sine answers sit on the right side of the circle, from − to ; inverse cosine answers sit on the cap, the top half, from 0 to π.
- Check every answer before you write it: the cosine of your answer must give back the input, and the answer must lie from 0 to π. Both checks must pass.
- Small angle, big x: a small turn leaves the point far to the right. So , the bigger x-value, goes with the smaller angle , and goes with the bigger angle .
- Pattern for checking table work: in every row of this lesson's table, arccos x and arcsin x add to . For x = −: + (−) = − = = . If your two answers do not add to , one or both are wrong: check each value and the half it sits on.
- Do not memorize the table. Rebuild any row in seconds: picture the top half of the unit circle, find the point whose x-coordinate is the input, and name its angle.
- Write the final answer as an exact value in radians, such as , not 120° or 2.09, unless the question asks for degrees or a decimal.
7 The trap
Answering a negative input with a negative angle, the way the inverse sine does: arccos(−) = − is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past , up to π: here . Catch the slip by taking the cosine of what you wrote: cos(−) = +, the wrong sign.
Flash cards
Say the answer out loud, then flip.
In plain words, what does arccos x ask for?
- The one angle from 0 to π whose cosine is x.
- Picture a protractor whose straight edge reads −1 at the left end and 1 at the right end: find x on the edge, look straight up to the rim and read the angle there.
What are the domain and range of arccos?
- Domain: [−1, 1], the inputs it accepts.
- Range: [0, π], the angles it gives back.
What is arccos(−)?
- The twin without the minus sign is arccos() = . A negative input lands on the top-left quarter, so mirror it across the vertical axis: π − = − = .
- Not −: arccos never answers below 0.
Why does arccos answer from 0 to π instead of from − to ?
- From 0 to π, the left-right position on the unit circle slides from 1 down to −1 without turning back, so each input from −1 to 1 gets exactly one angle.
- From − to , the position is never negative, and it repeats: and − both sit at .
Lesson 4 of 8
The inverse tangent
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of a ramp. Its steepness is one number: how far it rises for each foot it runs forward. Tangent turns an angle into that steepness, since tan θ is rise divided by run. The inverse tangent, written arctan, works backward: you hand it a steepness and it hands back the angle. Every steepness can happen: 0 for flat ground, 1 for a 45° ramp, 1000 for an almost vertical cliff, a negative number for a downhill ramp. So arctan takes any number. But no ramp is perfectly vertical: straight up has no run, and rise ÷ 0 has no value. So the angle you get back is always strictly between straight down and straight up, − and , and never either one.
2 Picture it
Reminder
Reminder: Tangent on the unit circle, Dividing fractions, Dividing by zero, Rationalizing, Negative angles, Radians to degrees, Tangent repeats every half turn, Round and square brackets, Reflecting over y = x, The range of arcsin, Subtracting a negative, Adding fractions with π
- Tangent on the unit circle. tan θ = , the point's height divided by its across. At the point is (, ), so tan = 1.
- Dividing fractions. Flip the second fraction and multiply: ÷ = × = .
- Dividing by zero. A number divided by 0 has no value: is undefined, so tan does not exist.
- Rationalizing. Multiply top and bottom by the root in the bottom: = = . This multiplies by , which is 1, so the value does not change.
- Negative angles. A negative angle turns clockwise from the positive x-axis: − is a 60° turn clockwise, ending below the x-axis on the right.
- Radians to degrees. Replace π with 180°: − = − = −60°.
- Tangent repeats every half turn. Half a turn away the point is (−across, −height), and (−height) ÷ (−across) = height ÷ across, so tan = tan = 1.
- Round and square brackets. A round bracket leaves an end out and a square bracket keeps it: (−, ) leaves out both ends, [−, ] keeps both.
- Reflecting over y = x. Swap the coordinates of every point: (, 1) on y = tan x becomes (1, ) on y = arctan x.
- The range of arcsin. arcsin answers from − to with both ends included: arcsin 1 = .
- Subtracting a negative. Subtracting a negative is adding: 5 − (−2) = 5 + 2 = 7.
- Adding fractions with π. Rewrite with a common bottom, then add the tops: + = + = .
3 Why
Tangent repeats every half turn, so one number is the tangent of many angles: tan = tan = 1. To get one answer we keep one piece of the tangent graph that rises through every number exactly once. Choosing the piece from − to is a convention: it is unbroken, holds 0, and is the right half of the circle that arcsin uses. Without one agreed piece, arctan(−1) could be − to one person and to another. The ends are left out because cos θ = 0 there, and tangent, sine ÷ cosine, would divide by zero.
4 The rule
arctan x, also written x, means and .
Domain: all real numbers, . Range: , with both ends left out. Horizontal asymptotes: and .
The same idea, five ways
Say “arc tangent of x” (ark TAN-jent) or “tan inverse of x”. Both mean the angle whose tangent is x. Never read it as “one over tan x”.
The inverse tangent of a number is the one angle strictly between − and whose tangent is that number; that angle is called the principal value.
- y = arctan x
- y = tan⁻¹ x
- tan y = x and − < y <
- domain: (−∞, ∞), all real numbers
- range: (−, ), that is {y | − < y < }
- graph: horizontal asymptotes y = − and y =
A ramp tilt finder: tell it how many feet a ramp rises per foot forward and it tells you the tilt. It works for any steepness, but it never says straight up or straight down.
The same idea, other ways
Take the piece of y = tan x between − and , its restricted domain. It climbs from far below to far above and hugs two vertical walls, the asymptotes x = − and x = . It passes the horizontal line test, so it is a one-to-one function and has an inverse function. Flip it over the dashed line y = x by swapping the coordinates of every point: (, 1) becomes (1, ). The flipped curve is y = arctan x. Its walls turn into a floor y = − and a ceiling y = , the two horizontal asymptotes, and it runs left and right forever, because every input works.
Keep only the right half of the unit circle and cut out its very top point (0, 1) and its very bottom point (0, −1). Every answer of arctan is an angle whose side ends on what is left. The tangent of that angle is the point's height divided by its across, which is the steepness of the side. Points above the x-axis give positive tangents, points below it give negative ones, and the point (1, 0) gives 0. At the two cut-out points the across is 0, so there is no tangent, and their angles, and −, are never answers.
A skateboard ramp that rises 1 foot for every 1 foot it runs has steepness 1, and arctan 1 = , a 45° tilt. A ramp that rises feet, about 1.73, per foot is tilted , which is 60°. Build steeper and steeper ramps, rising 10, then 100, then 1000 feet per foot forward, and the tilt creeps toward 90° but never gets there, because a wall that goes straight up does not run forward at all. A downhill ramp has a negative steepness and a negative tilt: steepness −1 means a tilt of −.
The table shows angles creeping up toward 90° and their tangents, rounded. Read the bottom row from left to right: the tangent climbs from 1 to about 572.96, and it shoots up fastest as the angle gets close to 90°. Now read the table upward, which is what arctan does: an input of about 572.96 gives back only about 89.9°. No input, however large, gives 90° itself. That ceiling is the horizontal asymptote y = , since is 90°. Large negative inputs work the same way toward the floor y = −.
Suppose some number x had arctan x = . Then, by the definition, tan = x. But the point at is (0, 1), so tan = , and dividing by zero has no answer: 12 cookies cannot be shared among 0 friends. So no x works, and is not in the range. The same holds at −, where the point is (0, −1). Every angle strictly between them has an across bigger than 0, so its tangent exists, and those angles are exactly the outputs of arctan.
| angle θ | point (cos θ, sin θ) | tan θ = sin θ ÷ cos θ | read backward by arctan |
|---|---|---|---|
| no value: −1 ÷ 0 | never an answer | ||
| arctan(−) = − | |||
| arctan(−1) = − | |||
| arctan(−) = − | |||
| 0 (0°) | (1, 0) | 0 | arctan 0 = 0 |
| arctan = | |||
| 1 | arctan 1 = | ||
| arctan = | |||
| (0, 1) | no value: 1 ÷ 0 | never an answer |
5 How
- Read arctan(a) as a question: which angle, strictly between − and , has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
- If a has a square root in its bottom, rewrite it to match the table: = .
- Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
- Find a in the tan θ column of the table and read the angle at the start of its row.
- Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between − and .
Finding an exact inverse tangent
- Turn arctan(a) into a question: which angle θ, with − < θ < , has tan θ = a?
- Tidy the number so it can be matched: if it has a root in its bottom, multiply top and bottom by that root, so becomes .
- Pick where to search on the right half of the circle: above the x-axis (0 < θ < ) when a is positive, below it (− < θ < 0) when a is negative, and θ = 0 when a = 0. On the right half the across is positive, so the tangent has the same sign as the height.
- Find a in the tangent column of the special-angle table and read the angle in its row.
- Check: work out tan θ = from the point on the circle and confirm it equals a, then confirm that θ is strictly between − and .
6 Worked example
Worked example
An exact value with a negative input: arctan(−)
Find the exact value of arctan(−).
Show the steps and the answer
- Say what the question asks: find the one angle , with , whose tangent is .That is the definition of arctan. The input − is a tangent value, and the output must be an angle on the right half of the circle, not at its very top or bottom.
- Decide where to search: below the x-axis, between and 0.Tangent is height ÷ across. On the right half the across is positive, so a negative tangent needs a negative height, which means a point below the x-axis.
- Find in the row of the table and follow the arrow up: it sits under .The point at − is (, −), and its height divided by its across is −. Reading the table from the bottom row up is exactly what arctan does.
- Make sure the angle is allowed: is , and .Other angles also have tangent −, such as (120°) and (300°), but they are outside the range, so they cannot be the answer.
- Write the answer: arctan.− is the principal value: the only angle in the range whose tangent is −.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1, almost trivial: arctan(0)
Find arctan(0).
Show the steps and the answer
- Say what it asks: which angle , with , has ?arctan takes a tangent value and returns the one allowed angle with that tangent.
- A tangent is 0 when the point's height is 0, so look for points on the x-axis: (1, 0) at angle 0 and at angle .tan θ = height ÷ across, and a fraction is 0 exactly when its top is 0 and its bottom is not. This step finds every point where the tangent could be 0.
- Keep (1, 0) and drop .(−1, 0) is on the left half, so its angle π is outside the range.
- Answer: arctan.0 is the only allowed angle with tangent 0.
Rung 2 of 7
Rung 2, a first special angle: arctan(1)
Find arctan(1).
Show the steps and the answer
- Say what it asks: which angle , with , has ?That is the definition of arctan: the input is a tangent, the output is an allowed angle.
- A tangent of 1 means height across , so the height and the across are equal.A fraction equals 1 when its top equals its bottom.
- On the right half, the height equals the across at , where the point is .A 45° angle sits halfway between the two axes, so its point is as high as it is far across.
- Answer: arctan.The only other point with equal height and across is at , on the left half, outside the range.
Rung 3 of 7
Rung 3, a bigger tangent: arctan()
Find arctan().
Show the steps and the answer
- Say what it asks: which angle , with , has ?That is the definition of arctan.
- is positive, so search above the x-axis: is between 0 and .On the right half the across is positive, so a positive tangent needs a positive height.
- Find in the column of the table: it sits in the row of .The point at is (, ), and ÷ = .
- Answer: arctan. is in the range and has tangent .
- Watch the gotcha: is not . is a height or an across on the circle, a sine or a cosine. , about 1.73, is too big to be a sine or a cosine, but it is a perfectly good tangent.
Rung 4 of 7
Rung 4, a negative input: arctan(−1)
Find arctan(−1).
Show the steps and the answer
- Say what it asks: which angle , with , has ?That is the definition of arctan.
- is negative, so search below the x-axis: is between and 0.On the right half the across is positive, so a negative tangent needs a negative height.
- A tangent of means the height is the across with its sign flipped. Below the x-axis that happens down, at the point ; in the row of the table, sits under .Height and across have the same size and opposite signs, so their quotient is −1.
- Name the angle by turning clockwise: .The range runs from − to , so a point below the x-axis gets a negative name. The same point is also called , but is outside the range.
- Answer: arctan.It is the only allowed angle with tangent −1.
- Watch the gotcha: do not answer .tan = ÷ (−) = −1 as well, but is 135°, on the left half, outside the range.
Rung 5 of 7
Rung 5, a number in disguise: arctan(−)
Find arctan(−).
Show the steps and the answer
- Say what it asks: which angle , with , has ?That is the definition of arctan.
- Rewrite the number to match the table: .Multiplying top and bottom by multiplies by 1, so the value does not change, and · = 3.
- The number is negative, so search below the x-axis: is between and 0.On the right half the across is positive, so a negative tangent needs a negative height.
- Find in the row: it sits under .The point at − is (, −), and (−) ÷ = − = −.
- Answer: arctan.− is in the range and has the right tangent.
- Watch the gotcha: and are the same number written two ways.If you search the table for − without rewriting it, you may think it is missing and give up.
Rung 6 of 7
Rung 6, what can go in and what can come out
Answer each, with a reason.
(a) Does arctan(1000) have an answer, and roughly where is it?
(b) Can arctan x equal for some number x?
(c) Can arctan x equal for some number x?
Show the steps and the answer
- (a) Ask whether 1000 is an allowed input: yes, the domain of arctan is all real numbers.A tangent is a steepness, and any steepness can happen: a ramp rising 1000 feet per foot of run is very steep, but it is not straight up.
- (a) Place the answer: , about 1.73, is far below 1000, and the tangent keeps rising as the angle climbs toward . So arctan(1000) is between and , very close to .On the right half a bigger tangent means a bigger angle, and no input reaches .
- (b) Compare with the range: is , more than .Every output of arctan is strictly between −90° and 90°, so 120° can never come out. tan = − is a real number, but arctan(−) is −, not .
- (c) Suppose arctan . Then would equal x.This is the definition read the other way: if y = arctan x, then tan y = x. The step tests whether any x could work.
- (c) The point at is (0, 1), so , which has no value. No x works.Dividing by zero has no answer, so is left out of the range. The graph of arctan approaches the line y = but never touches it.
- (a) Yes. arctan(1000) exists, between and and very close to .
- (b) No. is outside the range (−, ).
- (c) No. tan does not exist, so is not in the range.
Rung 7 of 7
Rung 7, the hardest: arctan() − arctan(−1)
Find the exact value of arctan() − arctan(−1).
Show the steps and the answer
arctan() =
arctan(−1) = −
- Say what it asks: find each inverse tangent, then subtract the second angle from the first.Each arctan is one number, an angle in radians, so the whole expression is a subtraction of two numbers.
- arctan.tan = and is in the range, as in rung 3.
- arctan.tan(−) = −1 and − is in the range, as in rung 4.
- Subtract: .Subtracting a negative is adding.
- Add with the common bottom 12: and , so the sum is .Fractions add only when their bottoms match. 12 is the smallest number that both 3 and 4 go into evenly, so multiply the top and bottom of by 4 and of by 3.
- Watch the gotcha: the answer is bigger than , and that is fine.The range rule applies to each arctan, not to a number built from two of them. The rule mattered in step 3: answering there would give − = − = −, which is wrong.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: arctan lives on the right half of the circle, the same half as arcsin, with the top and bottom points punched out because the across is 0 there. Punched-out ends get round brackets: (−, ).
- Memory device for the table: the tangents of , and are , 1 and , and each is times the one before: × = = 1, then 1 × = . The negative angles have the same tangents with a minus sign.
- Check every answer two ways: is it strictly between − and , that is between −90° and 90°? Does its tangent, worked out as sine ÷ cosine, give back the number you started with?
- When you write up a solution, put the definition line first: y = arctan x means tan y = x and − < y < . Seeing the range on the page keeps you from answering or .
- In y = arctan x, x is a slope (a tangent value) and y is an angle. Do not read them as the horizontal and vertical positions of a unit-circle point.
7 The trap
Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of , of and of −, and it is tempting to write the first one that comes to mind. Only the principal value, −, lies strictly between − and , so arctan(−1) = −. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.
Flash cards
Say the answer out loud, then flip.
What goes into the inverse tangent, and what comes out?
- In: a steepness, which can be any real number. The domain is (−∞, ∞).
- Out: an angle strictly between − and (between −90° and 90°). The range is (−, ).
Why are − and left out of the range of arctan?
- At those angles cos θ = 0, so tangent, sine ÷ cosine, would divide by zero, like a vertical ramp with no run.
- The graph only creeps toward those heights, so y = − and y = are horizontal asymptotes.
tan = 1. Is arctan(1) = ?
- No, arctan(1) = , the principal value.
- also has tangent 1, but it is outside the range (−, ), so arctan never gives it.
If a < 0, where on the unit circle is the angle arctan(a)?
- On the right half, below the x-axis.
- The angle is negative, strictly between − and 0, like a downhill ramp.
Lesson 5 of 8
Exact values by the sign and the quadrant
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Finding an exact inverse value is like giving a taxi driver an address in two parts. The first part says how far: the reference angle, the size of the turn, which you read off the special angles while ignoring any minus sign. The second part says which side of town: the quadrant. The sign of the input picks the side, but each inverse function drives only in its own neighborhood. The inverse sine and the inverse tangent stay on the right half of the circle, so a negative input sends them below the x-axis: a negative angle. The inverse cosine stays on the top half, so a negative input sends it to the left side: an angle past .
2 Picture it
Reminder
Reminder: Sine, cosine and the unit circle, Tangent from the point, Negative angles, Signs by quadrant, The three ranges, Allowed inputs, Inverse notation, Subtracting from π, Adding fractions, Subtracting a negative, Dividing fractions, Rationalizing, Radians and degrees
- Sine, cosine and the unit circle. The point at angle θ on the unit circle is (cos θ, sin θ): cosine is the x-coordinate and sine is the height. At the point is (, ), so cos = and sin = .
- Tangent from the point. Tangent is the height divided by the x-coordinate, y ÷ x. At the point is (, ), so tan = 1.
- Negative angles. A negative angle turns clockwise from the positive x-axis: − is a 30° clockwise turn and ends in Quadrant IV.
- Signs by quadrant. In Quadrant II, x < 0 and y > 0, so cosine is negative and sine is positive. In Quadrant IV, x > 0 and y < 0, so sine and tangent are negative and cosine is positive.
- The three ranges. arcsin: [−, ]. arccos: [0, π]. arctan: (−, ). A square bracket includes its end, and a round one leaves it out.
- Allowed inputs. arcsin and arccos accept only inputs from −1 to 1, because a sine or cosine is a coordinate on a circle of radius 1. So arcsin(2) has no answer, while arctan accepts every number.
- Inverse notation. sin⁻¹ x, cos⁻¹ x and tan⁻¹ x mean arcsin x, arccos x and arctan x. For example cos⁻¹(1) = 0, the angle whose cosine is 1. The −1 is not a power.
- Subtracting from π. Write π with the bottom you need, then subtract the tops: π − = − = .
- Adding fractions. Fractions add when their bottoms match: + = + = = .
- Subtracting a negative. Subtracting a negative adds its positive: 5 − (−2) = 5 + 2 = 7.
- Dividing fractions. Dividing by a fraction means multiplying by its flip: ÷ = · = .
- Rationalizing. To clear a root from the bottom, multiply the top and the bottom by that root: = , because · = 2.
- Radians and degrees. π radians is 180°, so = 30°, = 45° and = 135°.
3 Why
Each range is half of the circle, chosen earlier so each input has exactly one answer. The right half (arcsin, arctan) is Quadrant I above the x-axis and Quadrant IV below. Sine is the height, and tangent is the height divided by a positive left-right distance, so a negative input means below: Quadrant IV, or straight down when the inverse sine's input is −1. The top half (arccos) is Quadrant I on the right and Quadrant II on the left. Cosine is the left-right position, so a negative input means left: Quadrant II, or the left end, π, when the input is −1. Mirror images give the two answers: −r is r reflected across the x-axis, and π − r is r reflected across the y-axis.
4 The rule
Let r be the reference angle: the angle from 0 to whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.
A zero or positive input gives r. A negative input gives for arcsin and arctan, and for arccos. In symbols: arcsinarcsin x, arctanarctan x, arccos arccos x. The result is the principal value: the one angle inside the range.
The same idea, five ways
The reference angle is how far the answer's side sits from the x-axis, ignoring which way.
The reference angle for an input is the angle from 0 to whose sine, cosine or tangent equals the input without its minus sign. It is also the angle between the answer's terminal side (the side where the turn ends) and the nearest part of the x-axis.
- r in [0, ]
- input − for sine: r = , because sin =
- answer = r, −r or π − r
Like the slant of a ladder: 45° off the ground is the same slant whether the ladder leans left or right. The slant is the reference angle, and the side it leans to is the quadrant.
The same idea, other ways
Picture the unit circle with the half each inverse may use shaded. arcsin answers on the right half, from straight down at − to straight up at , both ends included; arctan uses the same half with both ends left out. arccos answers on the top half, from 0 on the right to π on the left. A negative sine is a point below the x-axis, and on the right half those points are in Quadrant IV, plus the bottom end, −, for an input of −1. A negative cosine is a point left of the y-axis, and on the top half those points are in Quadrant II, plus the left end, π, for an input of −1.
Picture a round town cut into four quarters by a north-south road and an east-west road. The inverse sine driver delivers only in the east half, and so does the inverse tangent driver. The inverse cosine driver delivers only in the north half. Tell the inverse sine driver the address is south of the east-west road, and only one quarter of that driver's territory fits: the southeast, Quadrant IV. Tell the inverse cosine driver the address is west of the north-south road, and only the northwest fits: Quadrant II. Two addresses sit right on a road, at the edge of a quarter: due south, for the inverse sine of −1, and due west, for the inverse cosine of −1. The reference angle is the size of the turn between the east-west road and the line from the town centre to the house. The sign says which side of a road the house is on.
Cover the minus sign and solve the positive version first. Then put the minus sign back the way the function wants it: arcsin and arctan put it on the angle, and arccos takes the angle away from π. With numbers: arcsin() = , so arcsin(−) = −. arccos() = , so arccos(−) = π − = .
arcsin(−x) = −arcsin x
arctan(−x) = −arctan x
arccos(−x) = π − arccos x
Here r is the reference angle, strictly between 0 and . Turning by −r instead of r mirrors the point across the x-axis: x stays the same and the height changes sign. So sin(−r) = −sin r and tan(−r) = −tan r, which is why −r answers a negative sine or tangent, and −r stays on the right half. That move fails for cosine, because it keeps x. Mirror across the y-axis instead: the point at r goes to the point at π − r, the height stays and x changes sign. So cos(π − r) = −cos r, and π − r stays on the top half.
Degrees can make the pattern feel familiar, with π radians = 180°. The reference angle for is 30° for sine and 60° for cosine. So arcsin(−) = −30°, a 30° turn clockwise, and arccos(−) = 180° − 60° = 120°, which stops 60° short of a half turn. And arctan(−1) = −45°. Every arcsin and arctan answer lies between −90° and 90°, and every arccos answer between 0° and 180°. Back in radians: −30° = −, 120° = and −45° = −.
| Function | Range (half of the circle) | Input 0 or positive (r is the reference angle) | Input negative | Example |
|---|---|---|---|---|
| arcsin x | [−, ]: right half | Quadrant I or its edge: r | Quadrant IV, or straight down when x = −1: −r | arcsin(−) = − |
| arccos x | [0, π]: top half | Quadrant I or its edge: r | Quadrant II, or π itself when x = −1: π − r | arccos(−) = |
| arctan x | (−, ): right half, ends left out | Quadrant I or its edge: r | Quadrant IV: −r | arctan(−1) = − |
Part 1: The inverse sine of a negative input
The inverse sine answers only on the right half of the circle, from straight down (−) to straight up (). Sine is the height of the point. A negative input asks for a point below the x-axis, and the part of the right half below the x-axis is Quadrant IV together with its lowest point, straight down, which answers −1. To get there without leaving the range, you turn clockwise, so the answer is a negative angle: minus the reference angle.
- Range: [−, ], the right half: Quadrants IV and I, with straight down and straight up as its ends
- Input 0 or positive: the answer is r, in Quadrant I or on its edge
- Input negative: the answer is −r, in Quadrant IV, or straight down at − when the input is −1
- In symbols: arcsin(−x) = −arcsin x
Worked example
Arcsin(−)
Find arcsin(−). In plain words: find the angle in [−, ] whose sine is −.
Show the steps and the answer
- Reference angle: which angle from 0 to has sine ? It is .The point at is (, ), and the sine is its height, . So r = .
- Sign: is negative.A negative sine means a point below the x-axis.
- Quadrant: IV.The range covers Quadrants IV and I, and only Quadrant IV is below the x-axis.
- Angle: .Turning r = clockwise reaches Quadrant IV, and a clockwise turn is written with a minus sign.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- For a negative input, an arcsin answer always starts with a minus sign and is never below −.
Part 2: The inverse cosine of a negative input
The inverse cosine answers only on the top half of the circle, from the right end (0) over to the left end (π). Cosine is how far right or left the point is. A negative input asks for a point left of the y-axis, and the part of the top half on the left is Quadrant II together with the left end, which answers −1. So the answer goes past : turn all the way to π, then come back by the reference angle. It is never a negative angle.
- Range: [0, π], the top half: Quadrants I and II, with 0 and π as its ends
- Input 0 or positive: the answer is r, in Quadrant I or on its edge (r = when the input is 0)
- Input negative: the answer is π − r, in Quadrant II, or π itself when the input is −1
- In symbols: arccos(−x) = π − arccos x
Worked example
Arccos(−)
Find arccos(−). In plain words: find the angle in [0, π] whose cosine is −.
Show the steps and the answer
- Reference angle: which angle from 0 to has cosine ? It is .The point at is (, ), and the cosine is its x-coordinate, . It is not : sin is , but cos is .
- Sign: is negative.A negative cosine means a point left of the y-axis.
- Quadrant: II.The range covers Quadrants I and II, and only Quadrant II is left of the y-axis.
- Angle: .The Quadrant II angle with reference angle r stops r short of a half turn. Writing π as gives a common bottom, so the tops subtract: 6π − π = 5π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- An arccos answer is never negative. For a negative input it always lies between and π.
Part 3: The inverse tangent of a negative input
The inverse tangent answers on the right half of the circle, like the inverse sine, but the very top and bottom are left out, because tangent does not exist straight up or straight down. Tangent is the height divided by the left-right distance, and on the right half that distance is positive. So a negative tangent needs a negative height, which means Quadrant IV. The answer is a negative angle: minus the reference angle.
- Range: (−, ), the right half without its two ends, Quadrants IV and I
- Every number is allowed as an input
- Input 0 or positive: the answer is r, in Quadrant I or on its edge
- Input negative: the answer is −r, in Quadrant IV
- In symbols: arctan(−x) = −arctan x
Worked example
Arctan(−1)
Find arctan(−1). In plain words: find the angle strictly between − and whose tangent is −1.
Show the steps and the answer
- Reference angle: which angle from 0 to has tangent 1? It is .At the point is (, ). Tangent is y ÷ x, and a number divided by itself is 1. So r = .
- Sign: is negative.On the right half, a negative tangent means a negative height.
- Quadrant: IV.The range covers Quadrants I and IV. Tangent is positive in Quadrant I and negative in Quadrant IV.
- Angle: .Turning r = clockwise reaches Quadrant IV inside the range, and a clockwise turn is a negative angle.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- arctan follows the same sign rule as arcsin. The difference: arctan never equals − or , because tangent does not exist there.
5 How
- Name the reference angle: cover any minus sign and find the special angle from 0 to whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
- Read the sign of the input: zero, positive or negative.
- Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−) for arcsin, the left end (π) for arccos.
- Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
- Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
The four-step method for an exact inverse value
- Name the reference angle. First say what is asked: arcsin x is the angle in [−, ] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−, ) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to , in that function's row.
- Read the sign of the input.
- Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).
- Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
- Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.
6 Worked example
Worked example
Same input, two functions: arcsin(−) and arccos(−)
Find the exact values of arcsin(−) and arccos(−). In plain words: the input is − both times. First find the angle in [−, ] whose sine is −. Then find the angle in [0, π] whose cosine is −.
Show the steps and the answer
- Reference angle, for both: cover the minus sign and find the angle from 0 to whose sine is , and the one whose cosine is .At the point on the unit circle is (, ). Its height (the sine) and its x-coordinate (the cosine) are both , so the reference angle is r = for both questions.
- Sign, for both: the input is negative.The minus sign is what moves each answer out of Quadrant I.
- arcsin, quadrant: pick Quadrant IV.The range [−, ] is the right half of the circle, Quadrants IV and I. Sine is the height, and the height is negative only in Quadrant IV of those two.
- arcsin, angle: write .Inside the range, Quadrant IV is reached by turning r clockwise, and a clockwise turn is a negative angle.
- arccos, quadrant: pick Quadrant II.The range [0, π] is the top half of the circle, Quadrants I and II. Cosine is the x-coordinate, and x is negative only in Quadrant II of those two.
- arccos, angle: write .The Quadrant II angle with reference angle r stops r short of a half turn, so it is π − r. Writing π as gives both fractions the bottom 4, and then the tops subtract: 4π − π = 3π.
- arcsin(−) = −
- arccos(−) =
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: a positive input
Find arccos(). In plain words: find the angle in [0, π] whose cosine is .
Show the steps and the answer
- Reference angle: in the cosine row, , so .The point at is (, ), and cosine is the x-coordinate. Use the cosine row, not the sine row: sin is also , but that is a sine.
- Sign: positive.There is no minus sign in front of .
- Quadrant: I.Quadrant I is inside all three ranges, and both coordinates are positive there.
- Angle: .In Quadrant I the answer is the reference angle itself.
Rung 2 of 7
Rung 2: an input of zero
Find arcsin(0) and arccos(0). In plain words: find the angle in [−, ] whose sine is 0, then the angle in [0, π] whose cosine is 0.
Show the steps and the answer
- arcsin(0), reference angle: the angle from 0 to with sine 0 is 0.At angle 0 the point is (1, 0), and its height is 0.
- arcsin(0), sign and angle: zero is not negative, so the answer is .Only a negative input moves the answer out of Quadrant I and its edges.
- arccos(0), reference angle: the angle from 0 to with cosine 0 is .At the point is (0, 1), straight up, and its x-coordinate is 0.
- arccos(0), sign and angle: zero is not negative, so the answer is .The same rule: no minus sign, so no move away from the reference angle.
- arcsin(0) = 0
- arccos(0) =
Rung 3 of 7
Rung 3: a negative input for the inverse tangent
Find arctan(−). In plain words: find the angle strictly between − and whose tangent is −.
Show the steps and the answer
- Reference angle: the angle from 0 to with tangent is .At the point is (, ). Tangent is y ÷ x = ÷ = · = , and multiplying top and bottom by gives .
- Sign: negative.The input has a minus sign in front.
- Quadrant: IV.arctan answers on the right half, Quadrants I and IV, and tangent is negative only in Quadrant IV of those two.
- Angle: .A clockwise turn of r reaches Quadrant IV inside the range, and clockwise is negative.
Rung 4 of 7
Rung 4: answers at the ends of the range
Find arcsin(−1) and arccos(−1). In plain words: find the angle in [−, ] whose sine is −1, then the angle in [0, π] whose cosine is −1.
Show the steps and the answer
- arcsin(), reference angle: the angle from 0 to with sine 1 is .At the point is (0, 1), straight up, with height 1.
- arcsin(), sign and angle: negative, so the answer is .For arcsin a negative input means a clockwise turn. Turning clockwise points straight down, the bottom end of the range.
- arccos(), reference angle: the angle from 0 to with cosine 1 is 0.At 0 the point is (1, 0), with x-coordinate 1.
- arccos(), sign and angle: negative, so the answer is .For arccos a negative input means mirroring across the y-axis: (1, 0) mirrors to (−1, 0), which sits at a half turn, π.
- arcsin(−1) = −
- arccos(−1) = π
Rung 5 of 7
Rung 5: an input that is not allowed
Find arccos(−), if it exists. In plain words: is there an angle in [0, π] whose cosine is −?
Show the steps and the answer
- Size of the input: is about 1.73, so is about .1.7 × 1.7 = 2.89 and 1.8 × 1.8 = 3.24, so the number that squares to 3 sits between 1.7 and 1.8.
- Allowed inputs: arccos accepts only numbers from to 1.Cosine is the x-coordinate of a point on a circle of radius 1, so it is never below −1. About −1.73 is below −1.
- Stop: arccos() does not exist.No angle has cosine −, so the reference angle step has nothing to find: no special angle has cosine .
- Name the trap: belongs to the tangent row, since . So arctan does exist.arctan accepts every number and arccos does not. Borrowing a value from the wrong row is how arccos(−) gets a fake answer.
Rung 6 of 7
Rung 6: inverse notation and an input in disguise
Find cos⁻¹(−). In plain words: the input is −. Find the angle in [0, π] whose cosine is that number.
Show the steps and the answer
- Notation: means arccos.The −1 written up high means the inverse function, as with sin⁻¹. It does not mean 1 divided by cosine.
- Clear the root from the bottom: .Multiplying the top and the bottom by the same number leaves a fraction's value unchanged, and · = 2. The input is −, a special value in disguise.
- Reference angle: , so .The point at is (, ).
- Sign and quadrant: negative, so Quadrant II.arccos answers on the top half, and a negative cosine puts the point on its left part, Quadrant II.
- Angle: .The Quadrant II angle with reference angle r is π − r, and π = gives a common bottom.
Rung 7 of 7
Rung 7: the hardest kind, two inverses in one expression
Find the exact value of arccos(−) − arcsin(−). In plain words: find each angle on its own with the four steps, then subtract the second angle from the first.
Show the steps and the answer
- arccos(), reference angle: , so .The point at is (, ), and cosine is the x-coordinate.
- arccos(), sign, quadrant and angle: negative, so Quadrant II, and .arccos answers on the top half, and a negative cosine means its left part.
- arcsin(), reference angle: , so .The point at is (, ), and sine is the height. The two reference angles differ because they come from different rows.
- arcsin(), sign, quadrant and angle: negative, so Quadrant IV, and the answer is .arcsin answers on the right half, and a negative height means its lower part, reached by a clockwise turn.
- Subtract: .Subtracting a negative number adds its positive, the way 5 − (−2) = 7.
- Add with a common bottom: , so .Fractions add only when their bottoms match. Multiplying the top and bottom of by 2 turns thirds into sixths.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: cosine on top, sine and tangent on the right. Every arccos answer is on the top half of the circle, from 0 to π. Every arcsin and arctan answer is on the right half, from − to .
- Memory device for a negative input: sine and tangent turn clockwise, cosine turns past straight up. arcsin and arctan give −r. arccos gives π − r, which is more than .
- No inverse ever answers in Quadrant III, because none of the three ranges reaches it. An answer such as or is always wrong.
- Check every answer twice: take the sine, cosine or tangent of your angle and see the input come back with its sign, then confirm the angle is inside the range. An answer that passes only the first check is the most common slip.
- On paper, write the four steps as one line, for example: r = , negative, arccos, Quadrant II, π − = . Each decision is visible, so a slip is quick to spot.
- If the input has a root in the bottom, such as −, rationalize it first so it matches a value in the special-angle table: = .
7 The trap
The most common slip here is the right point with the wrong name. For arcsin(−) many people write , because the unit circle they learned runs from 0 to 2π. The point is right, but is not between − and , so it is not the principal value. Name the same point by turning clockwise: −. And , in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.
Flash cards
Say the answer out loud, then flip.
Like a taxi address, an exact inverse value has two parts. What are they?
- How far: the reference angle r, the angle from 0 to whose sine, cosine or tangent equals the input with its minus sign covered.
- Which side: the quadrant, picked by the sign of the input, but only inside that function's range; the inputs 0, 1 and −1 (for arctan, only 0) land on an axis instead.
For arcsin or arctan, where does a negative input land, and what angle do you write?
- Below the x-axis, in Quadrant IV or on its edge, because their range is the right half of the circle.
- Write −r. For example, arctan(−) = −, since tan = .
For arccos, where does a negative input land, and what angle do you write?
- Left of the y-axis, in Quadrant II or on its edge, because its range is the top half of the circle.
- Write π − r. For example, arccos(−) = π − = , since cos = .
Why is the wrong answer for arcsin(−)?
- It names the right point, but it is outside the arcsin range, − to , so it is not the principal value.
- Name the same point by turning clockwise: −.
Lesson 6 of 8
A function and its inverse undo each other, with conditions
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a Ferris wheel of radius 1 turning counterclockwise. Your seat's height above the center is the sine of your angle. A helper hears only your height and must name your seat. Most heights belong to two seats, one on the rising right half and one on the falling left half, so the helper has a fixed rule: always name the seat on the right half. Turn by an angle from − to , which puts you on the right half, and the helper names your seat by that very angle, so you get your angle back. Ride an extra lap first, as with , and the helper still names your seat, but by its first-lap angle, . Sit on the left half and the helper names a different seat at the same height. Starting from a height always works, as long as the wheel reaches it: the seat the helper names sits at that very height.
2 Picture it
Reminder
Reminder: Sine and cosine on the unit circle, Tangent on the unit circle, Comparing fractions of π, Subtracting from π, Full turns, Reference angles, Signs by quadrant, The three ranges, The four-step method, Square and round brackets
- Sine and cosine on the unit circle. The point for an angle has x = cosine and y = sine. The point for is (−, ), so cos() = − and sin() = .
- Tangent on the unit circle. Tangent is y ÷ x for the point: for , ÷ = 1.
- Comparing fractions of π. Give them the same bottom, then compare the tops: = , and 5 > 3, so > .
- Subtracting from π. Write π with the same bottom first: π − = − = .
- Full turns. Adding or subtracting 2π, one full turn, lands on the same point, so sine and cosine do not change: − 2π = − = .
- Reference angles. The angle back to the nearest side of the x-axis. First swap θ for β, the angle from 0 up to 2π that ends at the same point. The reference angle is then β in Quadrant I, π − β in Quadrant II, β − π in Quadrant III and 2π − β in Quadrant IV, and 0 or when β lies on an axis. For : 2π − = . For −: β = , so the reference angle is 2π − = .
- Signs by quadrant. All Silver Tea Cups: all three are positive in Quadrant I, only sine in II, only tangent in III, only cosine in IV. So sin(), in Quadrant III, is negative.
- The three ranges. arcsin answers in [−, ], arccos in [0, π], arctan in (−, ). For example arccos(−1) = π is allowed, because the bracket at π is square.
- The four-step method. Reference angle, sign of the input, the quadrant the range allows, write the angle. arcsin(−): reference angle , negative input, the part of the range below 0, so −.
- Square and round brackets. A square bracket includes the end and a round one leaves it out: 1 is in [−1, 1], but is not in (−, ).
3 Why
arcsin x is, by definition, an angle whose sine is x. Take the sine of that angle and you must get x back: that is what the angle was chosen for. The only condition is that arcsin x exists, which needs x in [−1, 1], since every height on the unit circle is between −1 and 1. The other order loses information. Sine gives the same number for many angles, such as and , and arcsin answers with only one of them, the principal value in [−, ]. So arcsin(sin x) equals x only when x already lies in that interval.
4 The rule
sin(arcsin x) for x in (undefined for other x); arcsin for x in , and for any other x it is the angle in with the same sine.
cos(arccos x) for x in (undefined for other x); arccos for x in , and for any other x it is the angle in with the same cosine.
The same idea, five ways
The sine of the arcsine of x is x, for x from negative 1 to 1. The arcsine of the sine of x is x only when x is from negative pi over 2 to pi over 2.
Sine undoes its inverse function, arcsin, for every number arcsin accepts, but arcsin undoes sine only for angles in its own range; for any other angle it returns the angle in that range with the same sine.
- sin(arcsin x) = x when −1 ≤ x ≤ 1
- arcsin(sin x) = x when − ≤ x ≤
- Interval: arcsin(sin x) = x for x in [−, ]
- Set-builder: arcsin(sin x) = x on {x | − ≤ x ≤ }
- Other notation: sin(sin⁻¹ x) = x on [−1, 1] and sin⁻¹(sin x) = x on [−, ]
- Cosine: cos(arccos x) = x on [−1, 1]; arccos(cos x) = x on [0, π]
A round trip through a translator: Spanish to English and back always returns your word, but English to Spanish and back can turn 'large' into 'big'.
The same idea, other ways
Draw the unit circle. arcsin answers only on its right half: from the bottom point, −, up through the rightmost point, 0, to the top point, . Every height from −1 to 1 appears exactly once on that half. An angle from − to survives the round trip arcsin(sin x). An angle on the left half, such as , comes back as the angle of its mirror point across the y-axis, : the point on the right half at the same height. For arccos the allowed half is the top half, from 0 to π, and the mirror is across the x-axis.
Translate the English word 'large' into Spanish and you get 'grande'. Translate 'grande' back and the dictionary gives its first entry, 'big'. Several English words share that one Spanish word, so the trip back cannot know which one you meant and hands back the standard one. Sine works the same way: , and all have sine , and arcsin hands back the standard angle, the principal value . Start on the Spanish side and the trip always works: 'grande' becomes 'big' and comes back as 'grande', the way sin(arcsin()) = .
The table sends four angles whose sine is through sine and then arcsin. Every column ends at , so only the column that started at came back to where it began: is the only one of the four inside [−, ]. Now start from numbers instead: sin(arcsin 0.3) = 0.3 and sin(arcsin(−1)) = sin(−) = −1. Every number from −1 to 1 comes back unchanged.
arcsin was built as the inverse function of sine on the restricted domain [−, ]. There sine is a one-to-one function: it passes the horizontal line test, so each height comes from exactly one angle. An inverse function undoes its function on exactly those inputs, so arcsin(sin x) = x for every x in [−, ]. For any other x, the output still has to lie in the range [−, ], so it cannot be x. In the other order, every number in [−1, 1] is a legal input to arcsin, and arcsin x is by definition an angle with sine x, so sin(arcsin x) = x for all of them.
Outside trig, trust; outside inverse, test. When sin, cos or tan is on the outside, trust the cancel, as long as the number inside is one the inverse accepts. When arcsin, arccos or arctan is on the outside, first test the angle against that inverse's range. Pass, and the answer is the angle. Fail, and the answer is the angle in the range with the same sine, cosine or tangent, provided the inside has a value at all: tan x has none when x is an odd multiple of .
Outside trig, trust: sin(arcsin x) = x for x in [−1, 1]
Outside inverse, test: arcsin(sin x) = x for x in [−π/2, π/2]
Test failed: if the inside value exists, the angle in the range with that value
| Pair | Trig on the outside | True for | Inverse on the outside | True for |
|---|---|---|---|---|
| sine and inverse sine | sin(arcsin x) = x | x in [−1, 1] | arcsin(sin x) = x | x in [−, ] |
| cosine and inverse cosine | cos(arccos x) = x | x in [−1, 1] | arccos(cos x) = x | x in [0, π] |
| tangent and inverse tangent | tan(arctan x) = x | every real x | arctan(tan x) = x | x in (−, ) |
Part 1: Sine and the inverse sine (arcsin)
Sine on the outside: arcsin x is an angle whose sine is x, so the sine of that angle is x again. That works for every x from −1 to 1; past them no such angle exists, and sin(arcsin x) is undefined. Inverse sine on the outside: arcsin answers only on the right half of the unit circle, with angles from − at the bottom to at the top. If your angle ends at a point on the right half, arcsin gives the angle in that range that ends at the same point, which is your angle itself when it was already in the range. If your angle ends on the left half, arcsin gives the angle of the mirror point across the y-axis, at the same height.
- sin(arcsin x) = x for every x in [−1, 1]
- sin(arcsin x) is undefined when x < −1 or x > 1
- arcsin(sin x) = x for every x in [−, ]
- Any other x: arcsin(sin x) is the angle in [−, ] with the same sine as x
- Mirror: the points for θ and π − θ are mirror images across the y-axis, so sin(π − θ) = sin θ
Worked example
Sine on the outside: sin(arcsin(−))
Find sin(arcsin(−)).
Show the steps and the answer
- Say what it asks: find the angle whose sine is , then take the sine of that angle.arcsin is inside, so it acts first, and sine acts on its answer.
- Test the number: , so is less than 1, and lies between and 0, inside .Sine on the outside gives back the number whenever arcsin of it exists, and arcsin accepts exactly the numbers from −1 to 1.
- Cancel: sin(arcsin()) .arcsin(−) is an angle whose sine is −, so its sine is −.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The number inside sin(arcsin x) does not have to be a special value: sin(arcsin 0.37) = 0.37, and you never need the angle.
Part 2: Cosine and the inverse cosine (arccos)
Cosine is the left-right position of the point on the unit circle, its x. Cosine on the outside: arccos x is an angle whose cosine is x, so cos(arccos x) = x for every x from −1 to 1, and it is undefined past them. Inverse cosine on the outside: arccos answers only on the top half of the circle, from 0 at the right end, over the top, to π at the left end. Every x from −1 to 1 appears exactly once on that half. If your angle ends on the top half, arccos gives the angle in [0, π] that ends at that same point, your angle itself when it was already in [0, π]. If it ends on the bottom half, such as , arccos gives the angle of the mirror point across the x-axis, which has the same x.
- cos(arccos x) = x for every x in [−1, 1]; undefined for other x
- arccos(cos x) = x for every x in [0, π]
- Any other x: arccos(cos x) is the angle in [0, π] with the same cosine as x
- Mirror: the points for θ and −θ are mirror images across the x-axis, so cos(−θ) = cos θ
- A negative angle never comes out of arccos, because arccos never answers below 0
Worked example
An angle on the bottom half: arccos(cos())
Find the exact value of arccos(cos()).
Show the steps and the answer
- Say what it asks: take the cosine of , then find the angle in whose cosine is that number.The outside function is arccos, and arccos answers only with angles from 0 to π.
- Test the angle: , and , so is outside .With the same bottom, compare the tops: 7 > 4. The test fails, so arccos and cosine may not be canceled.
- Find the inside value. is in Quadrant IV, its reference angle is , and cosine is positive there, so . lies between = and 2π = , which is Quadrant IV. There the point is right of the y-axis, so its x, the cosine, is positive.
- Replace the inside by its value: arccos arccos().What remains is an inverse cosine of a special value.
- Find arccos(): the reference angle is , because ; the input is positive, so the answer is in Quadrant I; the angle is .arccos answers a positive input with an angle between 0 and .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Think 'arccos lives on the top half': an answer from arccos that is negative or larger than π is always a mistake.
Part 3: Tangent and the inverse tangent (arctan)
Tangent is the height divided by the left-right position, y ÷ x, for the point on the unit circle. Tangent on the outside: arctan accepts every real number, so tan(arctan x) = x for every x, with no condition at all. Inverse tangent on the outside: arctan answers only with angles strictly between − and , the right half without its top and bottom points. If your angle ends on the right half, arctan gives the angle in the range that ends at that same point. If it ends on the left half, arctan gives the angle of the opposite point, half a turn away: a half turn flips the sign of both x and y, so y ÷ x stays the same.
- tan(arctan x) = x for every real number x
- arctan(tan x) = x for every x in (−, )
- Any other x where tan x exists: arctan(tan x) is the angle in (−, ) with the same tangent as x
- Half turn: the points for θ and θ − π are opposite each other, so tan(θ − π) = tan θ
- tan() does not exist, because x = 0 at the top of the circle, so arctan(tan()) is undefined
Worked example
An angle on the left half: arctan(tan())
Find the exact value of arctan(tan()).
Show the steps and the answer
- Say what it asks: take the tangent of , then find the angle in whose tangent is that number.The outside function is arctan, and arctan answers only with angles strictly between − and .
- Test the angle: , and , so is outside the range.With the same bottom, compare the tops: 3 > 2. The test fails, so arctan and tangent may not be canceled.
- Find the inside value: the point for is , so .Tangent is y ÷ x, and a number divided by its own negative is −1.
- Replace the inside by its value: arctan arctan().What remains is an inverse tangent of a special value.
- Find arctan(): the reference angle is , because ; the input is negative, so the answer is in the part of the range below 0; the angle is .arctan answers a negative input with a negative angle, between − and 0.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- tan(arctan x) never fails, whatever the number: tan(arctan 50) = 50.
5 How
- Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−, ] with that sine'.
- Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−, ] for arcsin, [0, π] for arccos, (−, ) for arctan.
- If the test passes, the two undo each other, and the answer is the number or angle you started with.
- If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
- If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan() does not, so arctan(tan()) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
- Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.
Evaluating a trig function and its inverse stacked together
- Say what it asks, reading from the inside out: the inner function acts first.
- Name the outside function and run its test.
- If the test passes, the answer is the value you started with.
- If the test fails, a trig function outside means undefined; an inverse outside means you first check that the inside value exists (tan has none at ), then find it exactly, then the angle in the range with that value.
- Check: with an inverse outside, the answer lies in its range and has the inside value as its sine, cosine or tangent; with sin, cos or tan outside, the answer equals the number you started with.
6 Worked example
Worked example
An angle outside the range: arcsin(sin())
Find the exact value of arcsin(sin()).
Show the steps and the answer
- Say what it asks: take the sine of , then find the angle in whose sine is that number.The inner function acts first. The outside function is arcsin, and arcsin answers only with angles from − to .
- Test the angle against the range. Give a bottom of 6: . Since , the angle is outside .With the same bottom, comparing fractions means comparing tops, and 5 > 3. Had the angle passed, the answer would be itself; it failed, so arcsin and sine may not be canceled.
- Find the inside value. is in Quadrant II, its reference angle is , and sine is positive there, so . lies between = and π = , which is Quadrant II. There the point on the unit circle is above the x-axis, so its height, the sine, is positive.
- Replace the inside by its value: arcsin arcsin().What remains is a plain inverse sine of a special value, the kind of problem the last lesson solved.
- Find arcsin() with the four-step method: the reference angle is , because ; the input is positive; so the answer is in Quadrant I, the part of the range from 0 to ; the angle is .arcsin answers a positive input with an angle between 0 and , and is that angle.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Trig outside, an allowed number inside
Find sin(arcsin()).
Show the steps and the answer
- Say what it asks: find the angle whose sine is , then take the sine of that angle.arcsin is inside, so it acts first, and sine acts on its answer.
- Test the number: , so is in .With sine on the outside, the test is whether arcsin accepts the number, and arcsin accepts exactly the numbers from −1 to 1.
- Cancel: sin(arcsin()) .arcsin() is an angle whose sine is , so its sine is . You never need to know which angle it is.
Rung 2 of 7
Trig outside, a number that is not allowed
Find cos(arccos 3).
Show the steps and the answer
- Say what it asks: find the angle whose cosine is 3, then take the cosine of that angle.arccos is inside, so it acts first.
- Test the number: 3 > 1, so 3 is not in .arccos accepts only numbers from −1 to 1.
- Stop and write undefined: arccos 3 does not exist, so cosine has nothing to act on.Cosine is the x of a point on the unit circle, and no point of a circle of radius 1 lies 3 units right of the center.
Rung 3 of 7
Inverse outside, an angle already in the range
Find arcsin(sin(−)).
Show the steps and the answer
- Say what it asks: take the sine of , then find the angle in with that sine.arcsin is on the outside, and arcsin answers only from − to .
- Test the angle: with a bottom of 6, the range runs from to , and lies between them.With equal bottoms, compare the tops: −3 ≤ −1 ≤ 3.
- Cancel: arcsin.On the restricted domain each sine value belongs to exactly one angle, so arcsin returns the angle you started with.
Rung 4 of 7
Inverse outside, an angle in Quadrant II
Find arcsin(sin()).
Show the steps and the answer
- Say what it asks: take the sine of , then find the angle in with that sine.arcsin is on the outside, and arcsin answers only from − to .
- Test the angle: with a bottom of 6, and . Since , the angle is outside the range.The test fails, so arcsin and sine may not be canceled.
- Find the inside value: is in Quadrant II, its reference angle is , and sine is positive there, so . = lies between = and π = . In Quadrant II the point is above the x-axis, so its height, the sine, is positive.
- Finish: arcsin() has reference angle and a positive input, so it is the Quadrant I angle .This is the four-step method: a positive input puts the answer between 0 and .
Rung 5 of 7
A negative angle inside arccos
Find arccos(cos(−)).
Show the steps and the answer
- Say what it asks: take the cosine of , then find the angle in with that cosine.arccos is on the outside, and arccos answers only from 0 to π.
- Test the angle: is negative, and the range starts at 0, so it fails.arccos never answers with a negative angle.
- Find the inside value: add a full turn, . That angle is in Quadrant III, its reference angle is , and cosine is negative there, so .Adding 2π, one full turn, lands on the same point, so the cosine is unchanged. = lies between π = and = , which is Quadrant III, where the point is left of the y-axis, so its x, the cosine, is negative.
- Finish: arccos() has reference angle and a negative input, so it is in Quadrant II: .arccos answers a negative input with an angle past , in Quadrant II, where cosine is negative.
Rung 6 of 7
Arcsin outside, an angle in Quadrant III
Find arcsin(sin()).
Show the steps and the answer
- Say what it asks: take the sine of , then find the angle in with that sine.arcsin is on the outside, and arcsin answers only from − to .
- Test the angle: with a bottom of 6, and . Since , the angle is outside the range.The test fails, so arcsin and sine may not be canceled.
- Find the inside value: is in Quadrant III, its reference angle is , and sine is negative there, so . lies between π = and = , which is Quadrant III. There the point is below the x-axis, so its height, the sine, is negative.
- Finish: arcsin() has reference angle and a negative input, so it is the angle below 0 in the range: .arcsin answers a negative input with a negative angle, between − and 0.
Rung 7 of 7
Arccos outside, an angle in Quadrant III
Find arccos(cos()).
Show the steps and the answer
- Say what it asks: take the cosine of , then find the angle in with that cosine.arccos is on the outside, and arccos answers only from 0 to π.
- Test the angle: , and , so the angle is outside .The test fails, so arccos and cosine may not be canceled.
- Find the inside value: is in Quadrant III, its reference angle is , and cosine is negative there, so . lies between π = and = , which is Quadrant III. There the point is left of the y-axis, so its x, the cosine, is negative.
- Finish: arccos() has reference angle and a negative input, so it is in Quadrant II: .arccos answers a negative input with an angle past , in Quadrant II, where cosine is negative.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: outside trig, trust; outside inverse, test. sin(arcsin x) gives back x whenever x is in [−1, 1]; arcsin(sin x) gives back x only after x passes the range test.
- The outside function owns the test. In arccos(cos x), compare x with [0, π], the range of arccos, even if x would pass for arcsin.
- Write the middle step every time: arcsin(sin()) = arcsin() = . It shows a reader why you did not cancel, and it lets you catch a slip in the last step.
- With an inverse on the outside, check the answer twice: it must lie in that inverse's range, and its sine, cosine or tangent must equal the inside value. With sin, cos or tan on the outside, the answer is the number you started with, once the inverse has accepted it.
- Picture the halves: the right half of the unit circle for arcsin and arctan, the top half for arccos. An answer on the wrong half is wrong.
- Same angle, different answers: arcsin(sin()) = −, but arccos(cos()) = . Always look at which inverse is outside.
7 The trap
Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin()) = . Before you cancel, test the angle against the range of the outside inverse. is past = , so it fails; work from the inside instead: sin() = , then arcsin() = .
Flash cards
Say the answer out loud, then flip.
Why can arcsin(sin x) give an angle different from x?
What is cos(arccos 2)?
- Undefined.
- arccos accepts only numbers from −1 to 1, so arccos 2 does not exist.
What is arcsin(sin(−))?
- The angle − lies in [−, ], the range of arcsin, so the two undo each other. You do not need to find sin(−).
What is arccos(cos())?
- The angle is past π, outside [0, π], so do not cancel. cos() = −, and the angle in [0, π] with cosine − is .
Lesson 7 of 8
Mixing the functions with a right triangle
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a ladder 5 feet long leaning on a wall, its top 3 feet up. How far is its foot from the wall? You never need to measure the angle at the floor. Ladder, wall and floor make a right triangle, and the Pythagorean theorem gives the floor side: 4 feet. The expression cos(arcsin()) is the same question written in symbols. The inside, arcsin(), is an angle with no special name, but it describes its triangle: the side opposite it is 3 (the wall) and the slanted side is 5 (the ladder). The outside, cos, asks for a different ratio of that same triangle: floor over ladder, . One more thing: a negative input moves the triangle into another quadrant, where one of its legs counts as negative.
2 Picture it
Reminder
Reminder: The Pythagorean theorem, Getting a squared letter alone, Squaring a square root, SOH-CAH-TOA, Special angles on the unit circle, Signed legs in any quadrant, Signs by quadrant: All Silver Tea Cups, Where each inverse answers, Interval brackets, Squaring a negative, Square root of a fraction, Dividing fractions, Tangent from sine and cosine, Sine squared plus cosine squared, Partners undo each other
- The Pythagorean theorem. In a right triangle, le + le = hypotenus. Missing leg: legs ? and 3, hypotenuse 5, so ?² = 25 − 9 = 16 and ? = 4. Missing hypotenuse: legs 3 and 4, so 9 + 16 = 25 and the hypotenuse is 5.
- Getting a squared letter alone. In + 9 = 25, subtract 9 from both sides: = 16. Then a = 4, the positive root, because a length is positive.
- Squaring a square root. Squaring a square root gives back what is inside: ( = 5, because is the positive number whose square is 5.
- SOH-CAH-TOA. Sine = , cosine = , tangent = . With opposite 3, adjacent 4, hypotenuse 5: sin = , cos = , tan = .
- Special angles on the unit circle. The point at is (, ), at it is (, ), and at − it is (, −). The across coordinate is the cosine and the height is the sine: cos = .
- Signed legs in any quadrant. For an angle drawn from the positive x-axis, drop a line from the end of its slanted side to the x-axis. The across leg is negative if it points left, the up-down leg is negative if it points down, and the slanted side is always positive. Example: the point (−3, 4) gives legs −3 and 4 and slanted side 5, so cos θ = − and sin θ = .
- Signs by quadrant: All Silver Tea Cups. Quadrant I: All three positive. II: only Sine. III: only Tangent. IV: only Cosine. Example: an angle in Quadrant II has a negative cosine and a negative tangent.
- Where each inverse answers. The inverse sine and the inverse tangent answer in the right half of the circle, from − to (the inverse tangent never reaches the ends). The inverse cosine answers in the top half, from 0 to π. Example: arccos(−) = , in Quadrant II.
- Interval brackets. A square bracket includes the end, a round one leaves it out: [0, π] contains 0 and π; (−, ) contains neither end.
- Squaring a negative. A negative times a negative is positive: (−5 = (−5) × (−5) = 25. So a squared leg is never negative.
- Square root of a fraction. Take the root of the top and of the bottom: = = . A number that is not a perfect square keeps its root: = .
- Dividing fractions. Flip the second fraction and multiply: ÷ = × = , because the 13s cancel.
- Tangent from sine and cosine. tan θ = : dividing by cancels the hypotenuse and leaves . Example: ÷ = .
- Sine squared plus cosine squared. The point (cos θ, sin θ) sits on the unit circle + = 1, so θ + θ = 1. Example, θ = : ( + ( = + = 1.
- Partners undo each other. sin(arcsin x) = x and cos(arccos x) = x when −1 ≤ x ≤ 1; tan(arctan x) = x for every x. Example: cos(arccos(−0.4)) = −0.4.
3 Why
An angle fixes the shape of its right triangle: right triangles with the same angle are copies at different sizes, so their side ratios agree. Saying sin θ = fixes the shape (3, 4, 5, or 6, 8, 10, with the same ratios), and the range of the inverse sine, together with the sign of , fixes the quadrant. Every other trig value of θ is a ratio of sides of that shape, so it is already decided. The triangle lets you read it without finding θ, which matters: arcsin() is not a special angle, and in degrees it is about 36.87°, with no neat exact form.
4 The rule
For an expression such as cos(arcsin a): let arcsin a, the principal value; draw in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from op hy; then read or .
When lands on an axis ( or or for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) . For a letter: cos(arcsin x) , for .
The same idea, five ways
Say 'cosine of arc sine of three fifths', and think 'the cosine of the angle whose sine is three fifths'.
Find the angle whose sine is , then take the cosine of that angle.
- cos(arcsin())
- cos θ, where θ = arcsin()
- cos θ, where sin θ = and − ≤ θ ≤
A 5-foot ladder reaches 3 feet up a wall: how far out is its foot? The Pythagorean theorem answers 4 feet, and nobody measures the angle.
The same idea, other ways
Put θ = arcsin() on the unit circle. It is the point in the right half at height = 0.6, because sine is the height. The radius to that point is 1, so the Pythagorean theorem gives the across distance: + ?² = 1, so ?² = 1 − 0.36 = 0.64 and ? = 0.8 = . On the unit circle the across distance is the cosine, so cos(arcsin()) = .
Two machines stand in a row. The first, arcsin, takes the number and gives back an angle θ. The second, cos, takes that angle and gives back a number. You never have to read θ in degrees: the cos machine only needs the shape of θ's triangle, and the label on θ, 'my sine is ', already fixes that shape.
Try cos(arcsin()). From the special angles, arcsin() = and cos = . Now the triangle way: opposite , hypotenuse 2, so the adjacent leg is = = 1, and the cosine is . The triangle reproduces an answer you can verify on the unit circle, which is why you can trust it when the angle has no special name.
Every angle obeys θ + θ = 1, because the point (cos θ, sin θ) sits on the unit circle. If sin θ = , then θ = 1 − = , so cos θ is or −. Only the sign is still open, and the quadrant settles it: arcsin() lies in Quadrant I, where cosine is positive. The triangle is a drawing of this same calculation.
| Inside function | Its range | The input gives | Input > 0 | Input < 0 |
|---|---|---|---|---|
| arcsin x | opposite and hypotenuse, | Quadrant I (x = 1 gives , on the axis) | Quadrant IV: opposite leg negative (x = −1 gives −, on the axis) | |
| arccos x | [0, π] | adjacent and hypotenuse, | Quadrant I (x = 1 gives 0, on the axis) | Quadrant II: adjacent leg negative (x = −1 gives π, on the axis) |
| arctan x | opposite and adjacent, | Quadrant I | Quadrant IV: opposite leg negative |
5 How
- Say it in words and name the inside angle: cos(arcsin()) is the cosine of θ, where θ = arcsin(), so sin θ = .
- Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
- Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
- Label the two sides the input gives: a sine gives , a cosine gives , a tangent gives . A leg that points left or down is negative; the hypotenuse is always positive.
- Find the third side with ad + op = hy: take the positive square root, then give a leg the sign of the direction it points.
- Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.
Evaluating a trig function of an inverse trig function
- Write 'Let θ = (the inside)' and say what θ is: θ = arccos(−) is the angle in [0, π] whose cosine is −.
- Choose the quadrant from the range of the inside function and the sign of the input.
- Draw the triangle in that quadrant and label the two sides the input gives, with the minus sign on a leg that points left or down, never on the hypotenuse.
- Find the third side with the Pythagorean theorem and give it the sign of its direction.
- Read the outside function as a ratio of the signed sides.
- Check: the sign agrees with All Silver Tea Cups, and the inside function of your triangle gives back the input.
6 Worked example
Worked example
The cosine of the angle whose sine is three fifths
Find the exact value of cos(arcsin()).
Show the steps and the answer
- Say what it asks: the cosine of the angle whose sine is . Name that angle arcsin(), so and .This is the definition of the inverse sine: arcsin() is the one angle in [−, ] whose sine is , its principal value. Naming it splits one tangled question into two small ones: what does θ look like, and what is cos θ.
- Pick the quadrant: the input is positive, so is between 0 and , in Quadrant I.The inverse sine answers only in the right half of the circle, and there the sine is positive only above the x-axis. Quadrant II also has positive sines, but arcsin never answers past .
- Label two sides: , so the opposite leg is 3 and the hypotenuse is 5.SOH: sine is opposite over hypotenuse, so the input hands you those two sides directly.
- Find the adjacent leg: , so , and adj . Plug back: .This finds the one missing side. The Pythagorean theorem says the legs squared add to the hypotenuse squared; subtracting 9 from both sides leaves ad alone; 4 × 4 = 16. Take the positive root because in Quadrant I the adjacent leg points right.
- Read the outside function: .CAH: cosine is adjacent over hypotenuse.
- Check the sign: is in Quadrant I, where all three functions are positive, so keeps its plus sign.All Silver Tea Cups: in Quadrant I, All are positive.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: a warm-up with a special angle, done two ways
Find the exact value of cos(arcsin()).
Show the steps and the answer
- Say what it asks: the cosine of the angle whose sine is . The answer will be a number.The inside, arcsin(), is an angle; the outside, cos, turns that angle into a number.
- Find the inside angle exactly: arcsin. lies in [−, ] and sin = : the point at on the unit circle is (, ), and sine is its height.
- Evaluate the outside: .Cosine is the across coordinate of that same point.
- Now the triangle way: , so the opposite leg is 1 and the hypotenuse is 2, in Quadrant I.SOH, and a positive input to the inverse sine lands in Quadrant I.
- Find the adjacent leg: , so and adj . Plug back: .The Pythagorean theorem finds the missing leg; 3 is not a perfect square, so the root stays as ; it is positive because the leg points right.
- Read the outside: .CAH. It matches the unit-circle answer, which is why the triangle can be trusted when the angle has no special name.
Rung 2 of 7
Rung 2: a new triangle, still in Quadrant I
Find the exact value of sin(arccos()).
Show the steps and the answer
- Say what it asks: the sine of the angle whose cosine is . Name it arccos(), so and .Definition of the inverse cosine: the one angle in [0, π] with that cosine.
- Pick the quadrant: , so is between 0 and , in Quadrant I.In the top half of the circle, the cosine is positive only to the right of the y-axis.
- Label: , so the adjacent leg is 8 and the hypotenuse is 17.CAH: cosine is adjacent over hypotenuse.
- Find the opposite leg: op, so op, op, and opp . Plug back: .This finds the missing side. Subtract 64 from both sides; 15 × 15 = 225; positive because in Quadrant I the opposite leg points up.
- Read the outside: .SOH: sine is opposite over hypotenuse.
Rung 3 of 7
Rung 3: a negative input to the inverse sine
Find the exact value of tan(arcsin(−)).
Show the steps and the answer
- Say what it asks: the tangent of the angle whose sine is . Name it arcsin(), so and .Definition of the inverse sine.
- Pick the quadrant: the input is negative, so is between and 0, in Quadrant IV.The inverse sine answers in the right half of the circle; a negative sine there means below the x-axis. Quadrant III also has negative sines, but arcsin never answers there.
- Label with signs: , so the opposite leg is and the hypotenuse is 25.In Quadrant IV the opposite leg points down, so the minus sign belongs to it. The hypotenuse is a length and stays positive.
- Find the adjacent leg: , so , and adj . Plug back: .(−7 = 49 because a negative times a negative is positive; 625 − 49 = 576 and 24 × 24 = 576. Positive because in Quadrant IV the adjacent leg points right.
- Read the outside: .TOA, with the signed legs.
Rung 4 of 7
Rung 4: a negative input to the inverse cosine
Find the exact value of tan(arccos(−)).
Show the steps and the answer
- Say what it asks: the tangent of the angle whose cosine is . Name it arccos(), so and .Definition of the inverse cosine.
- Pick the quadrant: the input is negative, so is between and , in Quadrant II.The inverse cosine answers in the top half of the circle; a negative cosine there means left of the y-axis. It can never be Quadrant III or IV, because arccos never answers past π or below 0.
- Label with signs: , so the adjacent leg is and the hypotenuse is 13.In Quadrant II the adjacent leg points left, so it carries the minus sign; the hypotenuse stays positive.
- Find the opposite leg: op, so op, op, and opp . Plug back: .Subtract 25 from both sides; 12 × 12 = 144. Positive because in Quadrant II the opposite leg points up.
- Read the outside: .TOA; a positive divided by a negative is negative. Dropping the minus sign would give , which answers a different question, tan(arccos()).
Rung 5 of 7
Rung 5: the inverse tangent, where you find the hypotenuse
Find the exact value of cos(arctan(−)).
Show the steps and the answer
- Say what it asks: the cosine of the angle whose tangent is . Name it arctan(), so and .Definition of the inverse tangent; its range leaves out both ends.
- Pick the quadrant: the input is negative, so is between and 0, in Quadrant IV.Tangent is negative in Quadrants II and IV, but the inverse tangent answers only in the right half of the circle, so Quadrant II is not allowed.
- Label with signs: , so the opposite leg is and the adjacent leg is 3.TOA. In Quadrant IV the opposite leg points down, so the minus sign goes on it, not on the adjacent leg.
- Find the hypotenuse: hy, so hyp . Plug back: .This time both legs are known, so add their squares. The hypotenuse is a length, so take the positive root.
- Read the outside: .CAH: cosine is adjacent over hypotenuse.
Rung 6 of 7
Rung 6: A negative inverse tangent with a root for the hypotenuse
Find the exact value of cos(arctan(−)), and write it with no root in the denominator. The figure shows the line y = −x through the origin, with the point (2, −5) on it.
Show the steps and the answer
- Say it in words and name the inside angle: cos(arctan()) is the cosine of , where arctan(), so .The inverse tangent gives back an angle. Naming it θ turns the question into one about a single angle whose tangent is known and whose cosine is wanted.
- Pick 's quadrant: the input is negative, and a negative input to the inverse tangent gives Quadrant IV, so .The inverse tangent only returns angles strictly between − and , which means Quadrant I or IV. Of those two, only Quadrant IV has a negative tangent. Quadrant II has negative tangents too, but its angles are outside that range. The input is not 0, so θ is not on an axis.
- Draw from the positive x-axis, turning clockwise into Quadrant IV, with its slanted side running from the origin through . Then draw a line from straight up to the x-axis, meeting it at (2, 0).The point (2, −5) is 2 right of the origin and 5 down, and = − = tan θ, so this half of the line y = −x is θ's terminal side. The other half, through (−2, 5) in Quadrant II, has the same tangent, but θ does not end there. The vertical line makes a right triangle with the reference angle at the origin.
- Label the two sides the input gives. A tangent gives , so write as : opp and adj .The vertical leg, from (2, 0) to (2, −5), points down, so it carries the minus sign. The horizontal leg, from the origin to (2, 0), points right, so it is positive. Putting the minus sign on the bottom instead, , would describe the point (−2, 5) in Quadrant II, which is the wrong quadrant.
- Find the third side, the hypotenuse, with op hy: , so hyp .Squaring removes the minus sign. The hypotenuse is a length, so take the positive square root. 29 is not a perfect square and has no square factor, so is already in simplest form.
- Read the outside function with SOH-CAH-TOA: . Check the sign with All Silver Tea Cups: is in Quadrant IV, where the cosine is positive, and is positive.CAH: the cosine is adjacent over hypotenuse, and both of those sides are positive. The minus sign from the input sits on the opposite side, which the cosine does not use. So a negative input to the inverse tangent still gives a positive cosine.
- Clear the root from the denominator: . equals 1, so multiplying by it does not change the value. Since · = 29, the bottom becomes a whole number, which is the form the question asks for.
Work to write
- θ = arctan(−), so tan θ = −
- Quadrant IV: − < θ < 0
- opp = −5, adj = 2
- hyp = =
- cos θ = = , positive in Quadrant IV
- cos(arctan(−)) =
Rung 7 of 7
Rung 7: a letter instead of a number
Write cos(arcsin x) with no trig functions in it, for −1 ≤ x ≤ 1.
Show the steps and the answer
- Say what it asks: a formula in x for the cosine of the angle whose sine is x. Name it arcsin x, so and .Definition of the inverse sine. x must be between −1 and 1, because no angle has a sine outside that range.
- Label, for an x with 0 < |x| < 1: , so the opposite leg is x and the hypotenuse is 1.SOH. Any number equals itself over 1, so a hypotenuse of 1 works for every x. Careful: here the letter x is the input, and it becomes the height of the triangle. At x = 0, 1 or −1 the triangle flattens, and the unit circle covers those inputs in the sign step.
- Find the adjacent leg: , so , and the leg's length is . Plug back: .The Pythagorean theorem; subtract from both sides, then take the square root. The square root of a difference does not split, so it stays .
- Choose the sign: take the root that is not negative, ; it is 0 when x is 1 or .The inverse sine always answers in the right half of the circle (Quadrant I, Quadrant IV, or on an axis at 0, or −), where the adjacent leg points right or has length 0. For a negative x the triangle flips below the x-axis, but its adjacent leg still points right. Every input from −1 to 1, the flat cases too, matches the point (, x) on the unit circle, whose left-right coordinate is the cosine.
- Read the outside: cos(arcsin x) .CAH; dividing by 1 changes nothing.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say it in words before you touch it: cos(arcsin()) is 'the cosine of the angle whose sine is '. In written work, make your first line 'Let θ = arcsin(), so sin θ = and θ is in Quadrant I.'
- Memory chain: inside gives two sides, Pythagoras gives the third, outside reads a ratio, the quadrant gives the sign.
- The answer is a number, never an angle: the outside function has the last word. With an inverse on the outside, as in arcsin(sin ), the answer is an angle instead.
- A positive input lands in Quadrant I (an input of exactly 1 to arcsin or arccos lands on an axis), where every answer is positive. Only a negative input needs sign work.
- Sign shortcuts: cos(arcsin of anything) and cos(arctan of anything) are never negative, because those angles live in the right half; sin(arccos of anything) is never negative, because the inverse cosine lives in the top half.
- Check by going back: your finished triangle must give the original input. For cos(arcsin()), the triangle 3, 4, 5 gives sin θ = , as it should.
- You do not need to memorize Pythagorean triples: the theorem rebuilds the third side in seconds. Recognizing 3, 4, 5 and 5, 12, 13 only saves time.
7 The trap
Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: instead of − for tan(arccos(−)). Decide the quadrant before you draw anything.
Flash cards
Say the answer out loud, then flip.
A ladder 13 feet long leans on a wall, its top 12 feet up. Find cos(arcsin()) without finding any angle.
- θ = arcsin() is the angle at the floor: the side opposite it is the wall, 12, and the hypotenuse is the ladder, 13. The Pythagorean theorem gives the floor side, = = = 5, so cos θ = = .
- No angle is needed: two known sides already fix the triangle's shape, so they fix every ratio of its sides too.
The input to an inverse trig function is negative. In which quadrant do you draw the angle?
- Inverse sine: Quadrant IV.
- Inverse tangent: Quadrant IV.
- Inverse cosine: Quadrant II.
- Why: the inverse sine and inverse tangent give only angles in the right half of the unit circle (Quadrants I and IV), the inverse cosine only angles in the top half (Quadrants I and II), and a negative input rules out Quadrant I, where every trig value is positive.
- An input of −1 to the inverse sine or inverse cosine lands on an axis instead.
Find sin(arccos(−)) and tan(arccos(−)).
- sin(arccos(−)) =
- tan(arccos(−)) = −
- Why: a negative input puts θ = arccos(−) in Quadrant II, with adjacent side −8 (it points left) and hypotenuse 17. The Pythagorean theorem gives the opposite side, = = = 15 (it points up), so sin θ = = and tan θ = = .
- Check: All Silver Tea Cups says only sine is positive in Quadrant II, which matches a positive sine and a negative tangent.
Lesson 8 of 8
Inverse values on a calculator, and why one answer is not all the answers
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a Ferris wheel. In every turn your seat passes each height between the bottom and the top twice: once on the way up and once on the way down. The top and the bottom themselves come once. Ask a careful friend when your seat was 0.6 of the way from the center up to the top, and you hear both moments. Ask your calculator and you hear one, the moment on the way up, because its sin⁻¹ key was built to give a single answer, the principal value. So the calculator is a quick helper with two habits you must manage. It speaks degrees or radians, and you choose which before you ask. It always gives one answer, so when a question wants every angle in a full turn, you find the twin yourself.
2 Picture it
Reminder
Reminder: Signs by quadrant, sin⁻¹ means the inverse, not 1 over, Rounding to a decimal place, Reading [0, 2π), Reference angle, Principal values, A full turn lands on the same point
- Signs by quadrant. All Silver Tea Cups: all three positive in Quadrant I, Sine in II, Tangent in III, Cosine in IV. Example: a point in Quadrant III has negative sine and negative cosine, so its tangent is positive.
- sin⁻¹ means the inverse, not 1 over. sin⁻¹(0.6) is the angle whose sine is 0.6, about 0.6435. The number is a different thing, about 1.7710.
- Rounding to a decimal place. Look at the first digit you drop: 5 or more, raise the last kept digit by one; 4 or less, leave it. To four decimal places 2.4980915 becomes 2.4981; to the nearest tenth 14.4775 becomes 14.5.
- Reading [0, 2π). The square bracket keeps 0; the round bracket leaves out 2π, which lands on the same point as 0. So each point of the circle is counted once: 0 ≤ t < 2π.
- Reference angle. The angle from 0 to between the terminal side and the x-axis: acute off the axes, and 0 or for an angle on an axis. Example: has reference angle π − = .
- Principal values. sin⁻¹ answers in [−, ], cos⁻¹ in [0, π], tan⁻¹ in (−, ). Example: cos⁻¹(−) = , an angle past , while sin⁻¹(−) = −, a negative angle.
- A full turn lands on the same point. Adding 2π (or 360°) brings an angle back to the same point of the circle. Example: −0.4115 + 2π ≈ 5.8717.
3 Why
A key must print one number, so sin⁻¹ is the inverse function of sine on its restricted domain [−, ]: the inverse sine, giving one principal value. The equation sin t = 0.6 asks for more: every angle in a full turn with sine 0.6. Sine is the height of a point on the unit circle, and a level line at height 0.6 cuts the circle twice, at mirror images across the vertical axis. The mirror of α stops α short of a half turn: π − α. The mode matters because one angle has two names, 36.87° and 0.6435 radians, and the calculator prints the name its mode asks for.
4 The rule
The and keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: k in k in k in , named in the units the mode is set to.
On and have two solutions when , one when or , and none when or k > 1; has two for every k. With the reference angle the key pressed on |k|, the solutions are the angles among and (in degrees ) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in that solves the equation ( at 0 and at and at 0 and ).
The same idea, five ways
Sine of t equals 0.6 on one full turn has two answers: the one the calculator shows, about 0.64, and its twin, pi minus that, about 2.50.
The calculator gives only the principal value, sin⁻¹(0.6) ≈ 0.6435; the equation sin t = 0.6 on [0, 2π) has two solutions, that value and π − sin⁻¹(0.6) ≈ 2.4981.
- sin t = 0.6 and 0 ≤ t < 2π
- t = sin⁻¹(0.6) or t = π − sin⁻¹(0.6)
- t ≈ 0.6435 or t ≈ 2.4981
- {t | sin t = 0.6 and 0 ≤ t < 2π} = {sin⁻¹(0.6), π − sin⁻¹(0.6)}
A Ferris wheel seat passes each height strictly between its lowest and highest points twice per turn, going up and coming down; the calculator reports only the trip up.
The same idea, other ways
On the unit circle, sine is the height of the point. Draw a level line at height 0.6. It cuts the circle at two points: one in Quadrant I, at t ≈ 0.6435, and its mirror image across the vertical axis in Quadrant II, at t ≈ 2.4981. The calculator shows only the Quadrant I point.
On a day when the sun rises and sets, it climbs to one midday peak and sinks again, so it passes each height between the horizon and that peak twice, once in the morning and once in the afternoon, about equally far from the moment it is highest; the peak itself comes only once. A friend who only ever thinks about mornings tells you the morning time and stops. The calculator is that friend. You supply the afternoon time yourself, by mirroring across the middle of the day.
Press sin(0.6435) and sin(2.4981): both show about 0.6. Two different angles, one sine. The sin⁻¹ key can print only one number, and it prints 0.6435 because only that one lies in its range, [−, ], which runs from about −1.5708 to 1.5708.
One key press, one answer. One full turn, two answers: for sine and cosine when the number is strictly between −1 and 1, and for tangent always. When a question says [0, 2π), check the number first: strictly between −1 and 1, or any number for tangent, means two answers, so go find the second; 1 or −1 means one; past them, none.
A thermometer can show one temperature as 68 in Fahrenheit or 20 in Celsius. An angle works the same way: sin⁻¹(0.6) prints about 36.87 in degree mode and about 0.6435 in radian mode, two names for one angle. The mode switch decides which name the calculator prints, and the calculator cannot guess which name your question wants.
| Equation on [0, 2π) | The key on k shows | Quadrants of the answers | The two answers, with α = the key on |k| |
|---|---|---|---|
| sin t = k, 0 < k < 1 | α, in Quadrant I | I and II | α and π − α |
| −α, a negative angle | III and IV | π + α and 2π − α | |
| cos t = k, 0 < k < 1 | α, in Quadrant I | I and IV | α and 2π − α |
| π − α, in Quadrant II | II and III | π − α and π + α | |
| tan t = k, k > 0 | α, in Quadrant I | I and III | α and π + α |
| tan t = k, k < 0 | −α, a negative angle | II and IV | π − α and 2π − α |
5 How
- Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
- Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is ; degree mode shows 90.
- Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
- Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
- Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
- Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Every solution of sin t = k, cos t = k or tan t = k on [0, 2π)
- Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).
- For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.
- Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.
- Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.
- Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
- If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.
6 Worked example
Worked example
Solving tan θ = 1.8 on [0°, 360°): the key gives one angle, and the second is 180° later
Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.
Show the steps and the answer
- Read the units. The interval has a degree sign, so set the calculator to degree mode in its mode or setup menu.The inverse keys answer in whatever units the mode is set to. In radian mode tan⁻¹(1.8) would show 1.063697822, which is a radian measure, but the question asks for degrees.
- Test the mode with one press: . The screen shows 90.90 is the degree measure of the angle whose sine is 1, so the mode is right. If the screen showed 1.570796327, which is , the calculator would still be in radian mode.
- Count the solutions before computing. On has two solutions for every k, so has two, even though 1.8 > 1.Sine and cosine stay between −1 and 1, so sin θ = 1.8 would have no solution. Tangent takes every real value. The key shows only one angle, so the work is not finished when the screen gives its answer.
- Press SHIFT (or 2nd) and then tan to get . Type (1.8) and press enter. The screen shows 60.9453959. Call this angle .tan⁻¹ is printed above tan as a second function. The x⁻¹ key is a different key: it would give ≈ 0.5555555556, which is a reciprocal, not an angle. Because 1.8 is positive, the principal value is also the reference angle, α = tan⁻¹(|k|).
- Pick the quadrants. in Quadrants I and III, so the solutions are and .For the point (x, y) on the unit circle, tan θ = . This is positive when x and y have the same sign, which happens in Quadrants I and III. Of α, 180° − α, 180° + α and 360° − α, only α and 180° + α lie in those quadrants. The angle 180° − α is in Quadrant II, where tan θ = −1.8.
- Right after the line, type Ans. The screen shows 240.9453959.Ans holds every digit of α, so no rounding enters from retyping. The key alone can never show this angle, because tan⁻¹ answers only between −90° and 90°. The point at 180° + α is directly opposite the point at α. Its coordinates are (−x, −y), and = = 1.8.
- Round only now, to the nearest tenth of a degree: and .The question asks for tenths. In both unrounded values the hundredths digit is 4, so both round down. Rounding once, at the end, keeps the answers accurate, and ≈ shows that they are rounded.
Work to write
- Degree mode: sin⁻¹(1) shows 90
- tan θ = k has two solutions on [0°, 360°) for every k
- α = tan⁻¹(1.8) ≈ 60.9453959°
- tan θ > 0 in Quadrants I and III, so θ = α or θ = 180° + α
- 180° + α ≈ 240.9453959°
- θ ≈ 60.9° or θ ≈ 240.9°
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: almost trivial, reading the mode from one key press
You press sin⁻¹(1) and the screen shows 90. Which mode is the calculator in, and what would the screen show in the other mode?
Show the steps and the answer
- Say what it asks: is the angle in whose sine is 1. The number on the screen names that angle in the calculator's current units.The angle itself never changes; only its name changes with the mode, so the number reveals the mode.
- Find the angle: sine is 1 only at the top of the unit circle, a quarter turn from the start.Sine is the height of the point, and the highest point of a circle of radius 1 has height 1.
- Name a quarter turn both ways: in degrees, in radians.A full turn is 360° or 2π, and a quarter of each is 90° or .
- The screen shows 90, so the calculator is in degree mode.In radians a quarter turn is about 1.57, nowhere near 90.
- Degree mode.
- In radian mode the screen would show 1.570796327, which is .
Rung 2 of 7
Rung 2: one key press, rounded two ways
Find tan⁻¹(2.5) in degrees, rounded to the nearest tenth of a degree, and in radians, rounded to four decimal places.
Show the steps and the answer
- Say what it asks: the one angle between and whose tangent is 2.5, named first in degrees and then in radians.tan⁻¹(2.5) is one value of the inverse tangent. No interval such as [0, 2π) is given, so no second answer is wanted.
- Set degree mode and test: shows 90. Press : the screen shows 68.19859051.The first answer is wanted in degrees, and the key returns the principal value, a Quadrant I angle because 2.5 is positive.
- Round to the nearest tenth: .In 68.19859051 the digit after the tenths place is 9, which is 5 or more, so the 1 in the tenths place goes up to 2.
- Set radian mode and test: shows 1.570796327. Press : the screen shows 1.19028995.It is the same angle, now named in radians.
- Round to four decimal places: 1.1903.In 1.19028995 the fifth decimal digit is 8, so the fourth decimal digit, 2, goes up to 3.
- tan⁻¹(2.5) ≈ 68.2°
- tan⁻¹(2.5) ≈ 1.1903 radians
Rung 3 of 7
Rung 3: two answers for a positive sine, in degrees
Solve sin θ = 0.25 on [0°, 360°). Round each answer to the nearest tenth of a degree.
Show the steps and the answer
- Say what it asks: every angle from up to but not including whose sine is 0.25.A full turn is wanted, so expect two answers.
- Set degree mode and test: shows 90. Check that 0.25 is between and 1.The interval is written in degrees, and a sine between −1 and 1 has angles to find.
- Press : the screen shows 14.47751219. Call it .0.25 is positive, so the principal value is a Quadrant I angle: the reference angle.
- Sine is positive in Quadrants I and II.The point is above the x-axis there (All Silver Tea Cups: All in I, Sine in II).
- Quadrant I: . Quadrant II: .In degrees a half turn is 180°, and the mirror image across the vertical axis stops α short of it.
- Round to the nearest tenth: and .In 14.47751219 the digit after the tenths place is 7, so the 4 goes up to 5. In 165.52248781 that digit is 2, so the 5 stays.
- θ ≈ 14.5°
- θ ≈ 165.5°
Rung 4 of 7
Rung 4: two answers for a positive cosine, a different mirror
Solve cos t = 0.3 on [0, 2π). Round each answer to four decimal places.
Show the steps and the answer
- Say what it asks: every angle t in one full turn, from 0 up to but not including , whose cosine is 0.3.Cosine is the left-right position of the point on the unit circle, and a full turn passes the position 0.3 twice.
- Set radian mode and test: shows 1.570796327. Check that 0.3 is between and 1.The interval uses π, and a cosine between −1 and 1 has angles to find.
- Press : the screen shows 1.266103673. Call it .0.3 is positive, so the principal value, which lies in [0, π], is in Quadrant I: it is the reference angle.
- Cosine is positive in Quadrants I and IV.The point is right of the vertical axis there (All Silver Tea Cups: Cosine in IV).
- Quadrant I: . Quadrant IV: type , which shows 5.017081634.Mirroring the point across the x-axis keeps its left-right position 0.3, and the mirror stops α short of a full turn: 2π − α. The sine pattern π − α would mirror across the vertical axis and give cosine −0.3.
- Round to four decimal places: 1.2661 and 5.0171.In 1.266103673 the fifth decimal digit is 0, so 1.2661 stays. In 5.017081634 the fifth decimal digit is 8, so the 0 before it goes up to 1.
- t ≈ 1.2661
- t ≈ 5.0171
Rung 5 of 7
Rung 5: a negative sine, where the calculator's answer is outside the interval
Solve sin t = −0.4 on [0, 2π). Round each answer to four decimal places.
Show the steps and the answer
- Say what it asks: every angle t in one full turn, from 0 up to but not including , whose sine is , a height below the center.A full turn is wanted, so expect two answers, both below the x-axis.
- Set radian mode and test: shows 1.570796327. Check that is between and 1.The interval uses π, and a sine between −1 and 1 has angles to find.
- Notice what shows: . It is negative, so it is not in at all.The principal value of sin⁻¹ for a negative number is a clockwise angle between − and 0.
- Find from the positive number: shows 0.4115168461.The reference angle is acute and positive, and the key on |k| = 0.4 gives it directly.
- Sine is negative in Quadrants III and IV.The point is below the x-axis there; sine is positive only in Quadrants I and II.
- Quadrant III: type , which shows 3.553109500. Quadrant IV: type , which shows 5.871668461.π + α goes α past a half turn, landing below the x-axis on the left; 2π − α stops α short of a full turn, landing below the x-axis on the right.
- Round to four decimal places: 3.5531 and 5.8717.In 3.553109500 the fifth decimal digit is 0, so 3.5531 stays. In 5.871668461 the fifth decimal digit is 6, so the 6 before it goes up to 7.
- t ≈ 3.5531
- t ≈ 5.8717
Rung 6 of 7
Rung 6: a negative cosine, where the calculator's answer is not the reference angle
Solve cos θ = −0.7 on [0°, 360°). Round each answer to the nearest tenth of a degree.
Show the steps and the answer
- Say what it asks: every angle from up to but not including whose cosine, the left-right position on the unit circle, is .A full turn is wanted, so expect two answers, both left of the vertical axis.
- Set degree mode and test: shows 90. Check that is between and 1.The interval is in degrees, and a cosine between −1 and 1 has angles to find.
- Notice what shows: 134.427004. It is one answer, but it is not the reference angle, because it is bigger than .The principal value of cos⁻¹ lies in [0°, 180°], and a negative input lands past 90°, in Quadrant II.
- Find from the positive number: shows 45.572996.The reference angle is acute, and the key on |k| = 0.7 gives it directly.
- Cosine is negative in Quadrants II and III.The point is left of the vertical axis there (All Silver Tea Cups: cosine is positive only in I and IV).
- Quadrant II: . Quadrant III: .180° − α stops α short of a half turn; 180° + α goes α past it. The Quadrant II answer matches the calculator's 134.427004, as it should.
- Round to the nearest tenth: and .In 134.427004 the digit after the tenths place is 2, so 134.4 stays. In 225.572996 that digit is 7, so the 5 goes up to 6.
- θ ≈ 134.4°
- θ ≈ 225.6°
Rung 7 of 7
Rung 7: the hardest, a negative tangent
Solve tan t = −2 on [0, 2π). Round each answer to four decimal places.
Show the steps and the answer
- Say what it asks: every angle t in one full turn, from 0 up to but not including , whose tangent is .A full turn is wanted, and tan t = k has two answers in a full turn for every k.
- Set radian mode and test: shows 1.570796327. Skip the to 1 check.Tangent is , a slope, and a slope can be any real number, so tan t = k always has answers.
- Notice what shows: . It is negative, so it is outside .The principal value of tan⁻¹ lies in (−, ), and a negative input gives a clockwise angle.
- Find from the positive number: shows 1.107148718.The key on the positive number gives the acute reference angle.
- Tangent is negative in Quadrants II and IV.Tangent is . In Quadrant II, y is positive and x negative; in Quadrant IV, y is negative and x positive. A positive divided by a negative, or a negative divided by a positive, is negative.
- Quadrant II: type , which shows 2.034443936. Quadrant IV: type , which shows 5.176036589.π − α stops α short of a half turn; 2π − α stops α short of a full turn.
- Round to four decimal places: 2.0344 and 5.1760.In 2.034443936 the fifth decimal digit is 4, so 2.0344 stays. In 5.176036589 the fifth decimal digit is 3, so 5.1760 stays; write the final 0 to show four places.
- t ≈ 2.0344
- t ≈ 5.1760
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- One-press mode test: sin⁻¹(1) shows 90 in degree mode and 1.570796327 in radian mode. Do it every time you pick up the calculator.
- Size check: answers on [0, 2π) lie between 0 and 6.2832, and answers on [0°, 360°) between 0 and 360. A radian answer like 36.87 means the calculator is in degree mode.
- Twin check: two cosine answers always add to 2π (360°); two tangent answers always differ by π (180°); two sine answers add to π (180°) when k is positive and to 3π (540°) when k is negative.
- Memory cue for the four positions, going around from Quadrant I: α, then half minus (π − α), half plus (π + α), full minus (2π − α).
- Press the inverse key on the positive number |k| every time. The result is always the reference angle, an angle from 0 to , which keeps the quadrant rule the same for sine, cosine and tangent.
- What to write down: the reference angle, the quadrants with the reason, and every answer: with = when it is exact, such as t = , and with ≈ and the rounding place when it is rounded, such as t ≈ 2.4981 (four decimal places).
7 The trap
The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.
Flash cards
Say the answer out loud, then flip.
Why does the sin⁻¹ key show only one angle?
What one press tells you whether the calculator is in degrees or radians?
- Press sin⁻¹(1).
- Radian mode shows 1.570796327, which is .
- Degree mode shows 90.
On [0, 2π), how many solutions does sin t = k have?
- Two when −1 < k < 1: a level line at height k cuts the unit circle twice.
- One when k = 1 or k = −1: the line touches the circle only at the top or the bottom.
- None when k < −1 or k > 1: the line misses the circle.