Trigonometry / Trigonometric functions
Trigonometric functions
All 10 lessons, in order.
The unit at a glance
- Right triangles and the names of their sides
Picture a ladder leaning against a wall.
- The six trig functions of an acute angle
Imagine measuring a ladder's shape without caring about its size.
- The fundamental identities
Think of changing a $5 bill into five $1 bills.
- The special angles: 30°, 45° and 60°
Picture cutting a square sandwich along its diagonal.
- Using the identities: rewrite and prove
You can pay the same amount with a $5 bill or five $1 bills.
- Definition 2: a point on the terminal side
Think of a map with your home at (0, 0), the origin.
- Quadrantal angles and undefined values
Picture a clock hand stopping exactly at the top, bottom, left or right.
- Signs by quadrant: find the quadrant first
Picture a city map split into four neighborhoods by an east to west street and a north to south street.
- Definition 3: the unit circle
Picture a round running track with radius 1 and the starting mark at (1, 0).
- Calculator values: DEG or RAD mode
A kitchen scale must know whether you mean grams or ounces.
Rules (10)
- Right triangles and the names of their sides
For an acute angle θ of a right triangle: hyp faces the 90° corner; opp is the leg facing θ; adj is the leg touching θ. The hypotenuse is excluded when naming adj.
The two acute angles add to 90°. - The six trig functions of an acute angle
For an acute angle in a right triangle: sin θ = , cos θ = , tan θ = .
csc θ = , sec θ = , cot θ = . - The fundamental identities
θ + θ = 1 for every angle. tan θ = and sec θ = require cos θ ≠ 0; cot θ = and csc θ = require sin θ ≠ 0.
Where both reciprocal expressions exist, cot θ = . θ + 1 = θ requires cos θ ≠ 0; θ + 1 = θ requires sin θ ≠ 0. - The special angles: 30°, 45° and 60°
45°, 45°, 90°: sides 1, 1, . 30°, 60°, 90°: the side across from 30° is 1, across from 60° is , across from 90° is 2. sin 30° = , sin 45° = , sin 60° = ; the cosines are the same list in reverse order. For an angle that makes full turns and then ends on an acute ray, we define its trig values to be those of that acute direction; this extends the triangle definition using the terminal side.
- Using the identities: rewrite and prove
For an acute angle, cos θ = and tan θ = . An identity holds on its common domain. Use sin θ ≠ 0 when dividing by sin θ and cos θ ≠ 0 when dividing by cos θ.
- Definition 2: a point on the terminal side
r = > 0. sin θ = , cos θ = , tan θ = (x ≠ 0), cot θ = (y ≠ 0), sec θ = (x ≠ 0), csc θ = (y ≠ 0).
- Quadrantal angles and undefined values
sin θ = y and cos θ = x at the axis points with r = 1.
tan θ and sec θ are undefined at θ = 90° + n·180°; cot θ and csc θ are undefined at θ = n·180°, where n is any integer (positive, negative or zero). In radians these are + nπ and nπ. - Signs by quadrant: find the quadrant first
Inside Quadrants I, II, III, IV, the positive functions are respectively: all six; sin and csc; tan and cot; cos and sec. Every remaining function is negative.
θ + θ = 1 gives the missing magnitude. The quadrant chooses the sign of sin θ or cos θ in front of its nonnegative square root. - Definition 3: the unit circle
+ = 1 and P(t) = (cos t, sin t). tan t = and sec t = require x ≠ 0; cot t = and csc t = require y ≠ 0.
P(t ± π) = (−x, −y); P(−t) = (x, −y); P(t + 2nπ) = (x, y), where n is any integer. - Calculator values: DEG or RAD mode
Use DEG for degrees and RAD for radians. Here an angle with no unit means radians.
sec θ = requires cos θ ≠ 0; csc θ = and cot θ = require sin θ ≠ 0. Round only the final value, retaining requested trailing zeros.
Recipes (10)
- Right triangles and the names of their sides
- Find the square corner. The side across from it is the hypotenuse; label it hyp.
- Put your finger on the angle the problem asks about.
- Of the two legs, the one touching that angle is adj.
- The leg that does not touch that angle is opp.
- If the problem switches to the other acute angle, swap opp and adj. The hyp stays the same.
- The six trig functions of an acute angle
- Name opp, adj and hyp from the angle asked about.
- If a side is missing, find it with the Pythagorean theorem.
- Write sin, cos and tan with SOH-CAH-TOA.
- Flip each one: csc is sin upside down, sec is cos upside down, cot is tan upside down.
- Reduce every fraction and rationalize any square root left on the bottom.
- The fundamental identities
- Read squared notation first: θ = (sin θ. Square the trig value, not the angle.
- If the given value is csc or sec, flip it to obtain sin or cos. If it is cot, its reciprocal gives tan only when cot is nonzero and tan exists.
- If sin or cos is known, substitute into θ + θ = 1. Subtract its square from both sides to isolate the missing square.
- Take the nonnegative square root to find the size. For an acute angle the missing sine or cosine is positive, so choose that sign. is 0, not positive.
- If tan is known, use θ + 1 = θ, choose positive sec for an acute angle, then flip for cos. Multiply tan by cos for sin.
- Use tan = sin ÷ cos and cot = cos ÷ sin when their denominators are nonzero. Flip cosine for secant and sine for cosecant.
- Reduce and rationalize. Check that the squares add to 1 and each reciprocal pair multiplies to 1.
- The special angles: 30°, 45° and 60°
- Sketch the triangle that contains your angle and write its three sides.
- Stand at your angle and name opp, adj and hyp.
- Read sin, cos and tan with SOH-CAH-TOA.
- Flip for csc, sec and cot, and rationalize.
- Use the sine reference diagram for the three acute special angles: each input and its exact output share one column. The axis lesson will add the two endpoint columns at 0° and 90°.
- Using the identities: rewrite and prove
- State the allowed inputs before rewriting: tan and sec need cos θ ≠ 0; cot and csc need sin θ ≠ 0. A displayed fraction also needs its denominator nonzero.
- Pick the messier side, usually the one with more terms or fractions.
- Rewrite every tan, cot, sec and csc using sin θ and cos θ.
- Combine fractions over a common denominator, or multiply out brackets.
- Replace 1 − θ with θ, 1 − θ with θ, and θ + θ with 1.
- Cancel common factors only when those factors are nonzero. Stop at the other side; preserve the original allowed inputs.
- Definition 2: a point on the terminal side
- Write down x and y with their signs.
- Find r = and simplify the root. r is always positive.
- sin θ = and cos θ = : reduce, then rationalize.
- tan θ = and cot θ = : r is not involved.
- sec θ = and csc θ = : the flips of cos and sin.
- Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.
- Quadrantal angles and undefined values
- If this is a quadrantal angle, add or subtract full turns until 0° ≤ θ < 360°; in radians use turns of 2π.
- Match its terminal side to (1, 0), (0, 1), (−1, 0) or (0, −1).
- Read sin θ = y and cos θ = x.
- Write tan = , cot = , sec = and csc = .
- Inspect every denominator first. A zero denominator gives undefined; otherwise do the division.
- Signs by quadrant: find the quadrant first
- For each clue, list every quadrant where it is true. A zero value points to an axis instead.
- Keep only the quadrants shared by every clue. If more than one remains, report that the information does not determine one quadrant.
- Use θ + θ = 1 to isolate the square of the missing partner.
- Take the nonnegative square root for its magnitude, then attach the sign required by the quadrant.
- Compute tan = , cot = , sec = and csc = , checking denominators.
- Check the squared identity and every sign against the clues.
- Definition 3: the unit circle
- For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
- Read x and y from the Terminal point P(t), and check + = 1 if a point is supplied.
- Write cos t = x and sin t = y.
- Use tan = , cot = , sec = and csc = , checking each denominator.
- For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
- For several moves, apply them one at a time and check the resulting quadrant.
- Calculator values: DEG or RAD mode
- Read the angle unit from the degree sign or words. If none is written, this course means radians.
- Set DEG or RAD before entering the angle, and use parentheses around an entire fraction, negative angle or multiple of π.
- Use the function key if available. Otherwise compute sec = 1 ÷ cos, csc = 1 ÷ sin, cot = cos ÷ sin, all with the same angle and mode.
- Check whether an exact axis input makes the needed denominator zero. If it does, write undefined rather than trusting a very large calculator display.
- Keep the unrounded value in calculator memory while doing reciprocals or other arithmetic.
- For p decimal places, inspect digit p + 1: 0 through 4 leaves digit p unchanged; 5 through 9 rounds the magnitude up. Restore the sign and keep exactly p places.
Traps (10)
- Right triangles and the names of their sides
Calling the hypotenuse the adjacent side. The hypotenuse also touches θ, but it is never called adjacent. Name the hypotenuse first, set it aside, and only then decide which of the two legs touches θ.
- The six trig functions of an acute angle
Naming sides by where they sit on the page. Figures put the angle in different corners, so the leg on the left is not always adjacent. Always name the sides from the angle's point of view.
- The fundamental identities
Reading θ as sin(). θ means (sin θ: find sine first, then square its value. Also, θ + θ = 1 relates squares; sin θ + cos θ is usually not 1. With sine and cosine , the ordinary sum is .
- The special angles: 30°, 45° and 60°
Swapping the 30° and 60° values. The shortest side, 1, faces the smallest angle, 30°, so sin 30° = is the small sine and sin 60° = (about 0.866) is the large one. From 0° to 90°, sine grows as the angle grows.
- Using the identities: rewrite and prove
Testing one angle and calling the identity proved. One angle can agree by coincidence; a proof needs algebra that works for every θ. Use a test angle only to check your algebra afterward.
- Definition 2: a point on the terminal side
Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.
- Quadrantal angles and undefined values
Writing 0 when the answer is undefined, or the reverse. = 0 is a real value; has no value. Look at which coordinate sits on the bottom before you answer.
- Signs by quadrant: find the quadrant first
Taking the positive square root out of habit. The principal square root, written , is nonnegative, including = 0. A missing sine or cosine can still be negative: choose its sign from the quadrant. When a sign clue leaves two possible quadrants, keep both instead of guessing.
- Definition 3: the unit circle
Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.
- Calculator values: DEG or RAD mode
Leaving the calculator in the wrong mode. Before any calculator question, look for a degree sign and set the mode. Quick test: sin 30 should show 0.5 in DEG mode.
Lesson 1 of 10
Right triangles and the names of their sides
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Picture a ladder leaning against a wall. The floor and wall make a square corner, exactly 90°. A triangle containing that corner is a Right triangle. The ladder faces the square corner and is the Hypotenuse (hyp), the longest side. The other two sides are legs. Pick one pointed corner and call its angle θ, read theta. The leg facing your corner is the Opposite side (opp). The leg touching your corner is the Adjacent side (adj). Move to the other pointed corner and those two names trade places. The hypotenuse stays the same. Your chosen angle is an Acute angle, smaller than a square corner.
Explain it like I am five
Lean a 17-foot ladder on a wall: bottom 8 feet from the wall, top 15 feet up. Floor and wall meet in a square 90° corner, so the three form a right triangle, a triangle with one 90° corner. The ladder faces that corner: it is the hypotenuse (hy-POT-uh-noos), the longest side. The floor and wall pieces are the legs.
Stand where the ladder meets the floor and call the angle there θ (theta, a Greek letter used as an angle's name). The floor leg, 8, touches your corner: it is adjacent, which means next to. The wall leg, 15, sits across from you: it is opposite. At the top corner the two names swap: 15 is adjacent, 8 is opposite. The ladder stays the hypotenuse.
Why: the Pythagorean theorem says le + le = hypotenus ( means 8 × 8): 64 + 225 = 289 = , so 17 beats each leg. The three angles add to 180° and the square corner takes 90°, so the two pointed corners share the other 90°: each is acute, smaller than 90°.
2 Picture it
Reminder
Reminder: Angle letters, Squaring, Acute angle
- Angle letters. θ means theta and names an angle. A and B can name angles too; the names do not tell you their sizes.
- Squaring. means 3 × 3 = 9. In a 3, 4, 5 right triangle, + = .
- Acute angle. 0° < θ < 90° means θ lies strictly between 0° and 90°; 40° is acute and 90° is not.
3 Why
The three angles of every triangle add up to 180°. The square corner uses 90° of that, so the other two angles share the remaining 90°. Each one is therefore smaller than 90°, which is what acute means. That is why this first definition only covers acute angles: a right triangle has no room for a second angle of 90° or more. The hypotenuse is the longest side because the Pythagorean theorem gives = + , which is bigger than alone and bigger than alone.
4 The rule
For an acute angle of a right triangle: hyp faces the corner; opp is the leg facing ; adj is the leg touching .
The hypotenuse is excluded when naming adj.
The two acute angles add to .
The same idea, five ways
Hypotenuse faces the square corner. Opposite faces your chosen angle. Adjacent is the leg beside it.
Opposite and adjacent depend on the chosen angle; the hypotenuse does not.
- hyp: across from 90°
- opp: across from θ
- adj: touches θ and is not hyp
- A + B = 90°
Your left and right change when you turn around; the building beside you stays the same.
The same idea, other ways
Stand at the ladder's foot. The ladder is hyp, the wall you face is opp, and the floor beside you is adj. Imagine standing at the top instead: the wall is now beside you and the floor faces you.
Find the square corner first and trace the side that never touches it: hyp. Put a finger on θ. Of the two remaining sides, one touches your finger, adj, and one does not, opp.
For a triangle with sides 3, 4 and 5, one pointed corner sees opp = 3 and adj = 4. The other sees opp = 4 and adj = 3. The side 5 faces the square corner in both views.
Part 1: Hypotenuse (hyp)
The hypotenuse is the ladder in the wall and floor picture. It is the only side that does not touch the square corner. Its name stays fixed when you choose another acute angle.
- hyp faces 90°.
- hyp is the longest side.
The same idea, five ways
Hypotenuse is the side across from the right angle.
The hypotenuse is the side that faces the 90° corner.
- hyp faces 90°.
- hyp is the longest side.
The ladder stays the ladder whether you stand at its foot or top.
Worked example
Find the side whose name stays fixed
A right triangle has legs 9 and 12 and side 15 facing the square corner. Find hyp. In words, find the side opposite 90°.
Show the steps and the answer
- Find the marked corner.The right angle determines the hypotenuse.
- The side facing it is 15, so hyp .It is the only side that does not meet that corner.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The little square corner is your anchor.
Part 2: Opposite side (opp)
Opposite means across from where you stand. Put your finger on the requested acute angle. The opposite leg is the one your finger cannot touch without crossing the triangle.
- opp faces θ.
- opp is a leg, not hyp.
The same idea, five ways
Opposite is the leg across from theta.
The opposite side is the leg that does not touch the chosen acute angle.
- opp faces θ.
- opp is a leg, not hyp.
It is like the wall across from you when you stand at the ladder's foot.
Worked example
Find the leg across from your corner
θ is between side 12 and hypotenuse 15. Find opp. In words, find the leg that does not meet θ.
Show the steps and the answer
- The sides meeting are 12 and 15.They form the chosen corner.
- The remaining side is 9, so opp .It faces θ and does not touch it.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Point to θ before naming opp.
Part 3: Adjacent side (adj)
Adjacent means next to where you stand. Two sides touch θ, but one already has the name hypotenuse. Adjacent is the other touching side, the leg beside θ.
- adj touches θ.
- adj is the touching leg, not hyp.
The same idea, five ways
Adjacent is the leg next to theta.
The adjacent side is the leg touching the chosen angle, excluding the hypotenuse.
- adj touches θ.
- adj is the touching leg, not hyp.
It is like the floor beside you at the ladder's foot.
Worked example
Choose between the two touching sides
θ is between side 12 and hypotenuse 15. Find adj. In words, choose the touching side that is a leg.
Show the steps and the answer
- Set side 15 aside as hyp.It faces the square corner and cannot be renamed adjacent.
- The other touching side is 12, so adj .Adjacent is the touching leg.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Adjacent must touch θ and be a leg.
5 How
- Find the square corner. The side across from it is the hypotenuse; label it hyp.
- Put your finger on the angle the problem asks about.
- Of the two legs, the one touching that angle is adj.
- The leg that does not touch that angle is opp.
- If the problem switches to the other acute angle, swap opp and adj. The hyp stays the same.
Name the sides from the chosen angle
- Find the square corner. The side across from it is the hypotenuse; label it hyp.
- Put your finger on the angle the problem asks about.
- Of the two legs, the one touching that angle is adj.
- The leg that does not touch that angle is opp.
- If the problem switches to the other acute angle, swap opp and adj. The hyp stays the same.
6 Worked example
Worked example
Name the sides from both acute angles
A right triangle has legs 3 and 4 and hypotenuse 5. Angle A is the corner where the leg 4 meets the hypotenuse. Angle B is the corner where the leg 3 meets the hypotenuse. Name opp, adj and hyp for A, then for B. In words, label the same sides from two different corners.
Show the steps and the answer
- The legs 3 and 4 meet at the square corner, and the side across from it is 5. So hyp for both angles.The hypotenuse faces the right angle, whichever acute angle you stand at.
- Stand at A. The leg touching A is 4, so adj .Adjacent means next to: it is one of the two sides that form the corner at A, and it is not the hypotenuse.
- The leg across from A is 3, so opp .It is the one side that does not touch A.
- Stand at B. Now the leg 3 touches you and the leg 4 is across: adj , opp , hyp .Moving to the other acute angle swaps opposite and adjacent.
- At A:
- opp = 3
- adj = 4
- hyp = 5
- At B:
- opp = 4
- adj = 3
- hyp = 5
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Hypotenuse first, angle second, two legs last.
- Say across for opposite and next to for adjacent while pointing.
- Memory cue: H faces the right angle; O faces your angle; A is the remaining touching leg.
7 The trap
Calling the hypotenuse the adjacent side. The hypotenuse also touches θ, but it is never called adjacent. Name the hypotenuse first, set it aside, and only then decide which of the two legs touches θ.
Keep in mind
- Name the hypotenuse first and set it aside: it faces the 90° corner, so in a triangle with sides 8, 15 and 17 it is 17 from either pointed corner.
- Opposite and adjacent depend on your corner, not on the page: the 15-foot wall leg is opposite the angle at the ladder's bottom but adjacent to the angle at its top.
- The hypotenuse touches your angle too, yet it is never called adjacent: adjacent always means the leg that touches your corner, as the 8-foot floor leg does for the angle at the ladder's bottom.
Memory hook
Adjacent adjoins you, opposite is over there, and the hypotenuse is huge: the longest side, facing the square corner.
Flash cards
Say the answer out loud, then flip.
What is a right triangle?
What is the hypotenuse?
What does adjacent mean?
A right triangle has sides 9, 40 and 41. Which one is the hypotenuse?
One acute angle of a right triangle is 28°. What is the other one?
From angle A, opp = 8, adj = 15 and hyp = 17. From the other acute angle B, is opp still 8?
Lesson 2 of 10
The six trig functions of an acute angle
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Imagine measuring a ladder's shape without caring about its size. Compare two side lengths by dividing: that comparison is a ratio. An angle goes into a trig function and a ratio comes out, like a vending machine taking a coin and returning one item. Sine compares opposite with hypotenuse, cosine compares adjacent with hypotenuse, and tangent compares opposite with adjacent. Flip those fractions for cosecant, secant, and cotangent. Their abbreviations are sin, cos, tan, csc, sec and cot; sin θ is read sine of theta. SOH-CAH-TOA names sine's opposite and hypotenuse, cosine's adjacent and hypotenuse, and tangent's opposite and adjacent. Three sides give six choices of top and bottom. Each side can be divided by either of the other two. These side ratios use an acute angle.
Explain it like I am five
Keep the ladder: 17 feet long, bottom 8 feet from the wall, top 15 feet up, and θ the angle where it meets the floor. A trig function is a machine: an angle goes in and a ratio comes out. A ratio compares two lengths by dividing one by the other.
Sine of θ, written sin θ, is opposite over hypotenuse: ≈ 0.88 (≈ means about), so 88% of the ladder's length becomes height. Cosine, cos θ, is adjacent over hypotenuse: ≈ 0.47, the share that becomes floor distance. Tangent, tan θ, is opposite over adjacent: = 1.875, the steepness, 1.875 feet up for every foot across.
Turn each fraction upside down for the other three: cosecant, csc θ = ; secant, sec θ = ; cotangent, cot θ = . Why only the angle matters: a 34-foot ladder at the same tilt reaches 30 feet up, and = . Doubling every side doubles the top and the bottom, and the 2s cancel.
2 Picture it
Reminder
Reminder: Read the names, A reciprocal, Reduce, Rationalize, Missing side
- Read the names. sin θ means sine of theta, not sin times θ. α is read alpha and can name the angle too.
- A reciprocal. The reciprocal of is , because their product is 1.
- Reduce. = : divide top and bottom by the same nonzero factor 3.
- Rationalize. × = ; the multiplier is 1.
- Missing side. With legs 8 and 15, hyp = = 17. Add before taking the root.
3 Why
Enlarge a 3, 4, 5 triangle on a copier until its sides are 6, 8 and 10. Its angles stay the same, and sine stays the same too: = . Every side ratio keeps its value because the same scale factor appears on top and bottom and cancels. Triangles with the same angles are similar triangles, meaning scaled copies, so any right triangle with this angle gives the same ratios. That is why the angle alone determines the output of each trig function.
4 The rule
For an acute angle in a right triangle: .
.
The same idea, five ways
Sine of theta is opposite divided by hypotenuse.
A trigonometric function takes an angle as input and returns the indicated ratio as output.
- sin θ =
- cos θ =
- tan θ =
- csc θ =
- sec θ =
- cot θ =
A ladder's height per foot of ladder describes its tilt even after you buy a longer ladder.
The same idea, other ways
Height divided by ladder length is sine. Floor distance divided by ladder length is cosine. Height divided by floor distance is tangent. Turning each comparison around gives cosecant, secant and cotangent.
For opp = 3, adj = 4 and hyp = 5, sine is 3 ÷ 5, cosine is 4 ÷ 5 and tangent is 3 ÷ 4. Their flips are 5 ÷ 3, 5 ÷ 4 and 4 ÷ 3.
Read SOH as sine, opposite, hypotenuse; CAH as cosine, adjacent, hypotenuse; TOA as tangent, opposite, adjacent. The last two letters name top then bottom. Flip the matching fraction for the other three functions.
SOH: sin θ =
CAH: cos θ =
TOA: tan θ =
A copy machine doubles 3, 4, 5 to 6, 8, 10. reduces to , and reduces to . You changed the size, but division cancels the enlargement.
3, 4, 5 become 6, 8, 10
| Function | Ratio | Its flip | Ratio |
|---|---|---|---|
| sin θ | csc θ | ||
| cos θ | sec θ | ||
| tan θ | cot θ |
Part 1: Sine (sin θ)
Sine compares wall height with ladder length. It asks what share of the hypotenuse is the side facing your chosen angle.
- sin θ =
- This side ratio applies to an acute angle; both lengths are positive.
The same idea, five ways
Read sin θ as sine of theta.
The sine of an acute angle is its opposite leg divided by its hypotenuse.
- sin θ =
Sine compares wall height with ladder length. It asks what share of the hypotenuse is the side facing your chosen angle.
Worked example
Read sin from a small triangle
opp = 3, adj = 4 and hyp = 5. Find sin θ. In words, divide opp by hyp.
Show the steps and the answer
- Write .The definition identifies the numerator and denominator.
- Substitute .Use the side labels from the chosen angle.
- Keep in reduced exact form.The two numbers have no common factor greater than 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the numerator side first, then the denominator side.
Part 2: Cosine (cos θ)
Cosine compares floor distance with ladder length. It asks what share of the hypotenuse is the leg beside your chosen angle.
- cos θ =
- This side ratio applies to an acute angle; both lengths are positive.
The same idea, five ways
Read cos θ as cosine of theta.
The cosine of an acute angle is its adjacent leg divided by its hypotenuse.
- cos θ =
Cosine compares floor distance with ladder length. It asks what share of the hypotenuse is the leg beside your chosen angle.
Worked example
Read cos from a small triangle
opp = 3, adj = 4 and hyp = 5. Find cos θ. In words, divide adj by hyp.
Show the steps and the answer
- Write .The definition identifies the numerator and denominator.
- Substitute .Use the side labels from the chosen angle.
- Keep in reduced exact form.The two numbers have no common factor greater than 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the numerator side first, then the denominator side.
Part 3: Tangent (tan θ)
Tangent compares wall height with floor distance, like a ramp's steepness. The hypotenuse is not involved.
- tan θ =
- This side ratio applies to an acute angle; both lengths are positive.
The same idea, five ways
Read tan θ as tangent of theta.
The tangent of an acute angle is its opposite leg divided by its adjacent leg.
- tan θ =
Tangent compares wall height with floor distance, like a ramp's steepness. The hypotenuse is not involved.
Worked example
Read tan from a small triangle
opp = 3, adj = 4 and hyp = 5. Find tan θ. In words, divide opp by adj.
Show the steps and the answer
- Write .The definition identifies the numerator and denominator.
- Substitute .Use the side labels from the chosen angle.
- Keep in reduced exact form.The two numbers have no common factor greater than 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the numerator side first, then the denominator side.
Part 4: Cosecant (csc θ)
Cosecant reverses sine's comparison: ladder length per unit of wall height. Divide hypotenuse by opposite.
- csc θ =
- This side ratio applies to an acute angle; both lengths are positive.
The same idea, five ways
Read csc θ as cosecant of theta.
The cosecant of an acute angle is its hypotenuse divided by its opposite leg.
- csc θ =
Cosecant reverses sine's comparison: ladder length per unit of wall height. Divide hypotenuse by opposite.
Worked example
Read csc from a small triangle
opp = 3, adj = 4 and hyp = 5. Find csc θ. In words, divide hyp by opp.
Show the steps and the answer
- Write .The definition identifies the numerator and denominator.
- Substitute .Use the side labels from the chosen angle.
- Keep in reduced exact form.The two numbers have no common factor greater than 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the numerator side first, then the denominator side.
Part 5: Secant (sec θ)
Secant reverses cosine's comparison: ladder length per unit of floor distance. Divide hypotenuse by adjacent.
- sec θ =
- This side ratio applies to an acute angle; both lengths are positive.
The same idea, five ways
Read sec θ as secant of theta.
The secant of an acute angle is its hypotenuse divided by its adjacent leg.
- sec θ =
Secant reverses cosine's comparison: ladder length per unit of floor distance. Divide hypotenuse by adjacent.
Worked example
Read sec from a small triangle
opp = 3, adj = 4 and hyp = 5. Find sec θ. In words, divide hyp by adj.
Show the steps and the answer
- Write .The definition identifies the numerator and denominator.
- Substitute .Use the side labels from the chosen angle.
- Keep in reduced exact form.The two numbers have no common factor greater than 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the numerator side first, then the denominator side.
Part 6: Cotangent (cot θ)
Cotangent reverses tangent's comparison: floor distance per unit of wall height. Divide adjacent by opposite.
- cot θ =
- This side ratio applies to an acute angle; both lengths are positive.
The same idea, five ways
Read cot θ as cotangent of theta.
The cotangent of an acute angle is its adjacent leg divided by its opposite leg.
- cot θ =
Cotangent reverses tangent's comparison: floor distance per unit of wall height. Divide adjacent by opposite.
Worked example
Read cot from a small triangle
opp = 3, adj = 4 and hyp = 5. Find cot θ. In words, divide adj by opp.
Show the steps and the answer
- Write .The definition identifies the numerator and denominator.
- Substitute .Use the side labels from the chosen angle.
- Keep in reduced exact form.The two numbers have no common factor greater than 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the numerator side first, then the denominator side.
5 How
- Name opp, adj and hyp from the angle asked about.
- If a side is missing, find it with the Pythagorean theorem.
- Write sin, cos and tan with SOH-CAH-TOA.
- Flip each one: csc is sin upside down, sec is cos upside down, cot is tan upside down.
- Reduce every fraction and rationalize any square root left on the bottom.
Find all six values from a triangle
- Name opp, adj and hyp from the angle asked about.
- If a side is missing, find it with the Pythagorean theorem.
- Write sin, cos and tan with SOH-CAH-TOA.
- Flip each one: csc is sin upside down, sec is cos upside down, cot is tan upside down.
- Reduce every fraction and rationalize any square root left on the bottom.
6 Worked example
Worked example
Six trig functions of an acute angle when a leg is missing
In right triangle KLM the right angle is at L. The leg KL is 3 units long and the hypotenuse KM is 7 units long. Find the exact values of all six trigonometric functions of angle K. Write each answer as a reduced fraction with no square root in the denominator.
Show the steps and the answer
- Name the sides from angle K. The hypotenuse is KM , the side across from the right angle at L. The adjacent side is KL , the leg that touches K. The opposite side is LM, the leg across from K. Its length is not given.Opp and adj depend on which acute angle is asked about, but hyp is always across from the right angle. Naming the sides from angle K first keeps its ratios from being swapped with those of angle M.
- Find the missing leg with the Pythagorean theorem: , so . Then , so and LM .In a right triangle the squares of the legs add up to the square of the hypotenuse. A length is positive, so only the positive root counts. Taking the perfect square 4 out of 40 puts the root in simplest form.
- Write the three basic ratios with SOH-CAH-TOA, using opp , adj and hyp : .SOH: sine is opposite over hypotenuse. CAH: cosine is adjacent over hypotenuse. TOA: tangent is opposite over adjacent.
- Flip each ratio to get the other three: .Cosecant, secant and cotangent are the reciprocals of sine, cosine and tangent: csc K = , sec K = , cot K = .
- Two answers have a root on the bottom, so multiply top and bottom of each by : , and . Then confirm that all six fractions are reduced. None of the pairs 2 and 7, 3 and 7, 2 and 3, 7 and 20, or 3 and 20 shares a common factor. equals 1, so multiplying by it does not change the value. Since 2 · = 2 · 10 = 20, the root leaves the bottom. A fraction is in simplest form when the whole numbers on top and bottom share no factor greater than 1.
Work to write
- opp = LM, adj = KL = 3, hyp = KM = 7
- L = − = 49 − 9 = 40
- LM = = 2
- csc K = =
- sec K =
- cot K = =
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
All lengths given
opp = 3, adj = 4, hyp = 5. Find all six functions. In words, form the six ordered side ratios.
Show the steps and the answer
- .SOH-CAH-TOA gives the first three ratios.
- .Flip the first three in their matching pairs.
- csc θ =
- sec θ =
- cot θ =
Rung 2 of 6
Change the chosen angle
Choose the other acute corner of the same 3, 4, 5 triangle. Now opp = 4 and adj = 3. Find all six functions.
Show the steps and the answer
- hyp stays 5; opp and adj .Changing the chosen acute corner swaps the leg roles.
- .Substitute the new labels into SOH-CAH-TOA.
- .Flip each matching ratio.
- csc θ =
- sec θ =
- cot θ =
Rung 3 of 6
Reduce enlarged ratios
opp = 9, adj = 12, hyp = 15. Find all six functions. In words, divide named lengths and reduce.
Show the steps and the answer
- .Divide each top and bottom by their common factor 3.
- .Flipping reduced ratios gives reduced reciprocals.
- csc θ =
- sec θ =
- cot θ =
Rung 4 of 6
A missing hypotenuse
opp = 8 and adj = 15. Find hyp, then all six functions. In words, recover the missing side before making ratios.
Show the steps and the answer
- hyp .Add the squared legs according to the Pythagorean theorem.
- .Use the newly known three sides in SOH-CAH-TOA.
- .Flip each matching fraction.
- hyp = 17
- csc θ =
- sec θ =
- cot θ =
Rung 5 of 6
Rationalize a missing hypotenuse
opp = 1 and adj = 2. Find hyp and all six functions. In words, expect roots on the bottoms of sine and cosine.
Show the steps and the answer
- hyp .Add squared legs and take the nonnegative root.
- .Multiply by root five over itself, a fraction equal to 1.
- .The same multiplier removes the bottom root.
- .Use the leg ratios and the reversed hypotenuse ratios.
- hyp =
- cot θ = 2
- sec θ =
- csc θ =
Rung 6 of 6
The missing side is a leg
hyp = 6 and adj = 4. Find opp, then all six functions. In words, subtract squares to recover the missing leg.
Show the steps and the answer
- op, so opp .Subtract ad from both sides of the Pythagorean theorem; = .
- .Use SOH and CAH, then reduce by 2.
- .Use opposite over adjacent, then reduce by 2.
- .Flip the reduced ratios, then rationalize the two remaining root denominators.
- opp = 2
- csc θ =
- sec θ =
- cot θ =
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- SOH-CAH-TOA gives the first three ratios. Remember the flip pairs: sin with csc, cos with sec, tan with cot.
- All six acute-angle values are positive; a negative answer signals an error.
- Sine and cosine are below 1 because each leg is shorter than hyp. Tangent may exceed 1 when opposite is longer than adjacent.
- Rebuild three flip ratios instead of memorizing six independent fractions.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Naming sides by where they sit on the page. Figures put the angle in different corners, so the leg on the left is not always adjacent. Always name the sides from the angle's point of view.
Keep in mind
- Name the sides from the angle's point of view, not from where they sit on the page: at the top of the ladder the 8-foot floor leg is opposite, so sin = there.
- Each flip pair multiplies to 1, a quick check on csc, sec and cot: × = 1.
- The size of the triangle never matters, only the angle: a 3, 4, 5 triangle and a 6, 8, 10 triangle give the same sine, = .
- SOH-CAH-TOA works only inside a right triangle, since only a right triangle has a hypotenuse: in a triangle with angles 30°, 30° and 120°, the side across from 30° divided by the longest side is about 0.577, not sin 30° = 0.5.
Memory hook
SOH-CAH-TOA: Sine is Opposite over Hypotenuse, Cosine is Adjacent over Hypotenuse, Tangent is Opposite over Adjacent. Flip each for csc, sec, cot: every flip pair holds exactly one "co".
Flash cards
Say the answer out loud, then flip.
What does SOH-CAH-TOA stand for?
- sin =
- cos =
- tan =
What is cosecant?
Legs 8 and 15, hypotenuse 17. Angle A faces the leg 8. Find sin A, cos A and tan A.
Legs 9 and 40, hypotenuse 41. Angle B faces the leg 9. Find csc B and cot B.
- csc B =
- cot B =
One ladder has sin θ = 0.7. A ladder twice as long leans at the same angle. What is its sine?
Is tan θ = ?
Lesson 3 of 10
The fundamental identities
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Think of changing a $5 bill into five $1 bills. The amount stays the same even though it looks different. An identity is an equation that stays true for every allowed input, meaning every input for which its expressions exist. The six side ratios come from the same triangle, so they cannot vary independently. Reciprocal identities flip matching fractions. Quotient identities build tangent or cotangent by dividing sine and cosine. The Pythagorean identity ties their squares together. The notation θ means find sine first, then square that answer. For an acute angle, one known ratio lets you rebuild the other five. Absolute value bars give size without a sign: |−3| = 3.
Explain it like I am five
Picture a ladder 1 unit long. Its height up the wall is sin θ and its distance along the floor is cos θ, since opposite ÷ 1 and adjacent ÷ 1 are those lengths. The Pythagorean theorem, le + le = hypotenus, says θ + θ = 1. Read θ as "sine of theta, squared": find sin θ, then square it.
That is an identity: an equation true for every allowed input, as one $5 bill always equals five $1 bills. Say θ is acute (under 90°) and sin θ = . Then θ = 1 − ( = − = . Since = 576 and = 625, cos θ = , positive because θ is acute.
Next, tan θ = = ÷ = , since the 25s cancel. Flip for the rest: csc θ = , sec θ = , cot θ = . Dividing θ + θ = 1 by θ gives θ + 1 = θ, and dividing by θ gives θ + 1 = θ.
2 Picture it
θ means (sin θ
cos θ ≠ 0: θ + 1 = θ
sin θ ≠ 0: θ + 1 = θ
Reminder
Reminder: Balance an equation, Square a fraction, Subtract from 1, Principal root and two solutions, Divide fractions, Absolute value
- Balance an equation. Subtract from both sides: + = 1 gives = 1 − = .
- Square a fraction. ( = . A minus sign inside parentheses also disappears when squared.
- Subtract from 1. 1 − = − = . Match the bottoms first.
- Principal root and two solutions. = 3 and = 0. Solving = 9 gives u = ±3 because both signs square to 9.
- Divide fractions.
- Absolute value. |−3| = 3 and |3| = 3: the bars report size, or distance from zero, without a sign.
3 Why
Let the adjacent leg be a, the opposite leg b, and the hypotenuse c. Divide + = by nonzero : + = 1. The two fractions are θ and θ, giving θ + θ = 1. Flipping and dividing side ratios gives the other families. The parts show every divided term and its reason. The triangle proves these connections for acute angles; the later point definition preserves them for every angle where their expressions are defined. Know the first square-sum identity cold and rebuild the other two by division.
4 The rule
for every angle.
and require ; and require .
Where both reciprocal expressions exist, . requires ; requires .
The same idea, five ways
Sine squared plus cosine squared equals one.
The square of the sine of an angle plus the square of its cosine is always one.
Two square tiles share a fixed total area; one tile's area determines the other.
The same idea, other ways
Divide every side by c. The hypotenuse becomes 1, and the legs become , the sine, and , the cosine. The squared legs still add to the squared hypotenuse, now 1.
For sin θ = and cos θ = , their squares add to + = 1. Their ordinary sum is , so the squares matter.
θ and 1 − θ are the same amount, like five $1 bills and one $5 bill. You can replace one with the other inside an expression without changing its value.
Know sine? Square it, subtract from 1, take the root and choose the sign to get cosine. Divide the two for tangent, reverse the division for cotangent, and flip sine and cosine for cosecant and secant.
sine then square then 1 minus square
root and sign then cosine
divide and flip then other functions
| Identity | Why it is true |
|---|---|
| csc θ = | is upside down |
| sec θ = | is upside down |
| cot θ = | flips where tan exists and is nonzero; cot = cos ÷ sin applies more generally |
| ÷ = × = | |
| cot θ = | ÷ = , provided sin θ ≠ 0 |
| divide + = by | |
| θ + 1 = θ | divide every term by nonzero θ |
| θ + 1 = θ | divide every term by nonzero θ |
| |sin θ| ≤ 1 and |cos θ| ≤ 1 | Absolute value bars give size. Both nonnegative squares add to 1, so each square is at most 1 and each value has size at most 1. In a triangle a leg cannot exceed hyp. |
| |csc θ| ≥ 1 and |sec θ| ≥ 1 | A defined reciprocal flips a size between 0 and 1 to a size at least 1, as 1 ÷ = 2. Zero has no reciprocal. |
Part 1: Read θ and θ
A vending machine gives a number, and then you square that number. θ follows this order: find sine of θ, then multiply its output by itself. It never squares θ first.
- The same convention applies to θ, θ, θ and θ.
sin θ = then θ =
The same idea, five ways
Sine squared means the sine value multiplied by itself.
A superscript square on a trig name squares its output, not its input angle.
Square the number the machine gives you, like squaring a score after receiving it.
sin θ = then θ =
Worked example
Square the output
sin θ = . Find θ. In words, square the given output, not the angle.
Show the steps and the answer
sin θ = then θ =
- .The notation squares the sine output.
- .A fraction squared squares its numerator and denominator.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say square the sine value aloud.
Part 2: Reciprocal identities
A reciprocal reverses a fraction, like changing miles per hour into hours per mile. Sine pairs with cosecant, cosine with secant, and tangent with cotangent. A zero output has no reciprocal.
- csc θ = when sin θ ≠ 0.
- sec θ = when cos θ ≠ 0.
- cot θ = only where tan is defined and nonzero; cot = cos ÷ sin is the general quotient.
csc θ = , sin θ ≠ 0
sec θ = , cos θ ≠ 0
cot θ = where both exist
The same idea, five ways
Cosecant is one divided by sine; secant is one divided by cosine.
The reciprocal identities reverse a nonzero defined ratio into its paired function.
- csc θ = when sin θ ≠ 0.
- sec θ = when cos θ ≠ 0.
- cot θ = only where tan is defined and nonzero; cot = cos ÷ sin is the general quotient.
Miles per hour and hours per mile reverse the same comparison.
csc θ = , sin θ ≠ 0
sec θ = , cos θ ≠ 0
cot θ = where both exist
Worked example
Flip one cosine
cos θ = . Find sec θ. In words, reverse the given nonzero cosine ratio.
Show the steps and the answer
csc θ = , sin θ ≠ 0
sec θ = , cos θ ≠ 0
cot θ = where both exist
- .Cosine is nonzero, so its reciprocal exists. Dividing by a fraction flips it.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check for zero before taking a reciprocal.
Part 3: Quotient identities
Dividing sine by cosine cancels the hypotenuse shared by both fractions and leaves opposite over adjacent. Reverse the division for cotangent, like changing height per floor distance into floor distance per height.
- tan θ = when cos θ ≠ 0.
- cot θ = when sin θ ≠ 0.
- ÷ = × = .
cot θ = , sin θ ≠ 0
The same idea, five ways
Tangent is sine divided by cosine; cotangent reverses that order.
The quotient identities express tangent and cotangent as ratios of sine and cosine.
- tan θ = when cos θ ≠ 0.
- cot θ = when sin θ ≠ 0.
- ÷ = × = .
Height per floor distance and floor distance per height reverse the same ladder measurements.
cot θ = , sin θ ≠ 0
Worked example
Divide two known outputs
sin θ = and cos θ = . Find tan θ and cot θ. In words, divide the outputs in both possible orders.
Show the steps and the answer
cot θ = , sin θ ≠ 0
- .The nonzero cosine may divide sine; flip the second fraction and cancel factor 13.
- .The nonzero sine may divide cosine; reverse the order and cancel 13.
- cot θ =
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Name the division order before calculating.
Part 4: Pythagorean identity
Shrink a right triangle until hyp is 1. Its leg lengths become sine and cosine. The two small square areas still total the large square area, now = 1.
- θ = 1 − θ and θ = 1 − θ.
- The later point definition extends the triangle result to every angle.
The same idea, five ways
Sine squared plus cosine squared equals one.
After scaling the hypotenuse to 1, the two squared leg lengths add to 1.
- θ = 1 − θ and θ = 1 − θ.
- The later point definition extends the triangle result to every angle.
The two leg-square areas share the fixed total area of the hypotenuse square.
Worked example
Check two squared values
sin θ = and cos θ = . Check the identity. In words, square the outputs and add.
Show the steps and the answer
- and .Square both numerator and denominator of each fraction.
- .Equal denominators let you add the numerators.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write both superscript squares before substituting.
Part 5: Rebuild the other two Pythagorean identities
Changing units can make the same total look different, like measuring money in dollars or quarters. Divide every term by the same nonzero square, then use the quotient and reciprocal definitions to rename the fractions.
- For cos θ ≠ 0: + = , giving θ + 1 = θ.
- For sin θ ≠ 0: + = , giving 1 + θ = θ.
θ + 1 = θ
1 + θ = θ
The same idea, five ways
Tangent squared plus one equals secant squared; one plus cotangent squared equals cosecant squared.
Dividing every term of the sine-cosine identity by a nonzero square gives another equivalent identity.
- For cos θ ≠ 0: + = , giving θ + 1 = θ.
- For sin θ ≠ 0: + = , giving 1 + θ = θ.
Changing from dollars to quarters changes every amount by the same factor, preserving the equality.
θ + 1 = θ
1 + θ = θ
Worked example
Derive both divided identities
Start with θ + θ = 1. Derive the tangent-secant and cotangent-cosecant identities. In words, show every term after division.
Show the steps and the answer
θ + 1 = θ
1 + θ = θ
- For , divide every term by : .The divisor is nonzero, and equal operations on both sides preserve equality.
- .A quotient squared squares its top and bottom; sine divided by cosine is tangent.
- and . Hence .A nonzero number divided by itself is 1, and the reciprocal of cosine is secant.
- For , divide every term by : .Again the same nonzero divisor must act on every term.
- and .Cosine divided by sine is cotangent.
- . Hence .The reciprocal of sine is cosecant.
- θ + 1 = θ, when cos θ ≠ 0.
- 1 + θ = θ, when sin θ ≠ 0.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memorize the original square-sum identity and rebuild these two when needed.
Part 6: Bounds: the allowed sizes
Absolute value bars give size without direction, like distance from home: |−3| and |3| both equal 3. Sine and cosine have size at most 1. Their defined reciprocals, cosecant and secant, have size at least 1.
- |sin θ| ≤ 1 and |cos θ| ≤ 1.
- Both squares are nonnegative and total 1, so neither square can exceed 1. A value with size greater than 1 would have a square greater than 1.
- Where defined, |csc θ| ≥ 1 and |sec θ| ≥ 1. Flipping a nonzero size at most 1 gives size at least 1.
- Equivalently, −1 ≤ sin θ ≤ 1 and −1 ≤ cos θ ≤ 1.
The same idea, five ways
Sine and cosine lie between negative one and one, inclusive.
Sine and cosine have absolute value at most one; defined secant and cosecant have absolute value at least one.
- |sin θ| ≤ 1
- |cos θ| ≤ 1
- |csc θ| ≥ 1 where defined
- |sec θ| ≥ 1 where defined
The height reached by a ladder cannot exceed the ladder's length.
Worked example
Reject impossible values
Could sin θ = ? Could sec θ = ? In words, check each proposed output against the identity and reciprocal definitions.
Show the steps and the answer
- would be .A single square already exceeds the total 1, leaving no room for the other nonnegative square.
- would be , which is impossible.No real square is negative.
- would give , whose square also exceeds 1.Taking this nonzero reciprocal is valid, but its cosine violates the bound.
- sin θ = is impossible.
- sec θ = is impossible.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A bound checks size, not sign.
5 How
- Read squared notation first: θ = (sin θ. Square the trig value, not the angle.
- If the given value is csc or sec, flip it to obtain sin or cos. If it is cot, its reciprocal gives tan only when cot is nonzero and tan exists.
- If sin or cos is known, substitute into θ + θ = 1. Subtract its square from both sides to isolate the missing square.
- Take the nonnegative square root to find the size. For an acute angle the missing sine or cosine is positive, so choose that sign. is 0, not positive.
- If tan is known, use θ + 1 = θ, choose positive sec for an acute angle, then flip for cos. Multiply tan by cos for sin.
- Use tan = sin ÷ cos and cot = cos ÷ sin when their denominators are nonzero. Flip cosine for secant and sine for cosecant.
- Reduce and rationalize. Check that the squares add to 1 and each reciprocal pair multiplies to 1.
Recover values from one acute-angle function
- Read squared notation first: θ = (sin θ. Square the trig value, not the angle.
- If the given value is csc or sec, flip it to obtain sin or cos. If it is cot, its reciprocal gives tan only when cot is nonzero and tan exists.
- If sin or cos is known, substitute into θ + θ = 1. Subtract its square from both sides to isolate the missing square.
- Take the nonnegative square root to find the size. For an acute angle the missing sine or cosine is positive, so choose that sign. is 0, not positive.
- If tan is known, use θ + 1 = θ, choose positive sec for an acute angle, then flip for cos. Multiply tan by cos for sin.
- Use tan = sin ÷ cos and cot = cos ÷ sin when their denominators are nonzero. Flip cosine for secant and sine for cosecant.
- Reduce and rationalize. Check that the squares add to 1 and each reciprocal pair multiplies to 1.
6 Worked example
Worked example
Recover five functions from an acute cosecant
In a right triangle, csc θ = 7. Find the other five functions. In words, you know the hypotenuse divided by the opposite leg; recover the remaining ratios.
Show the steps and the answer
- .Cosecant and sine are reciprocals.
- becomes . Subtract from both sides: .This isolates the unknown cosine square. Subtracting the same fraction from both sides keeps the equation balanced.
- . = = 4. Cosine is positive for an acute angle.
- .The 7s cancel; multiplying top and bottom by gives bottom 4 × 3 = 12.
- ; .Both known values are nonzero, so their reciprocals exist. For secant multiply top and bottom by ; the bottom becomes 4 × 3 = 12.
- cot θ = 4
- sec θ =
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Start from cosine
θ is acute and cos θ = . Find the other five functions. In words, recover sine's square first.
Show the steps and the answer
- .Subtract cosine squared from both sides.
- .The top and bottom roots are 15 and 17, and the acute sine is positive.
- ; .Divide in each order.
- ; .Flip each nonzero partner.
- cot θ =
- sec θ =
- csc θ =
Rung 2 of 4
The given value is a reciprocal
θ is acute and sec θ = . Find the other five functions. In words, obtain cosine first.
Show the steps and the answer
- .Secant is the nonzero reciprocal of cosine.
- , so .Subtract the cosine square, then take the positive acute sine.
- .Divide the outputs in the required orders.
- .Flip sine; secant was already given.
- cot θ =
- csc θ =
Rung 3 of 4
A partner with a root
θ is acute and cos θ = . Find the other five functions. In words, recover a sine with a root and simplify its reciprocal.
Show the steps and the answer
- , so .Subtract the cosine square and take the positive root; = .
- .The equal bottoms cancel during division.
- .Flip tangent and rationalize: the bottom becomes 2 × 2 = 4.
- ; .Flip cosine and sine, rationalizing cosecant.
- cot θ =
- sec θ = 3
- csc θ =
Rung 4 of 4
Two rationalizations
θ is acute and sin θ = . Find the other five functions. In words, keep the root manipulations visible after finding cosine.
Show the steps and the answer
- .Subtract the known sine square from both sides.
- .The acute cosine is positive, and = .
- .Cancel 7 during division, then multiply top and bottom by .
- .Reverse the quotient; the root is already on top.
- .Flip cosine and sine, rationalizing the root denominator.
- cot θ =
- sec θ =
- csc θ =
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know θ + θ = 1 cold. Rebuild the two divided identities instead of memorizing three unrelated equations.
- Remember the flip pairs: sin with csc, cos with sec, tan with cot. The reciprocal shortcut needs both expressions to exist.
- Write the missing square before taking a root; the equation step and sign step do different jobs.
- Sine or cosine outside −1 to 1 signals an error. Defined secant or cosecant with size below 1 signals an error too.
- For these acute-angle questions all six values are positive. In later problems a quadrant clue chooses the sign.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Reading θ as sin(). θ means (sin θ: find sine first, then square its value. Also, θ + θ = 1 relates squares; sin θ + cos θ is usually not 1. With sine and cosine , the ordinary sum is .
Keep in mind
- θ means (sin θ, the sine squared, not the sine of : if sin θ = , then θ = .
- The squares add to 1, but the plain values usually do not: + = , while + = 1.
- An identity with a fraction needs a nonzero bottom: tan θ = has no value when cos θ = 0, as for a unit ladder standing straight up, where it would be .
- One line on your cheat sheet, θ + θ = 1, rebuilds the other two in seconds: dividing by θ gives θ + 1 = θ.
Memory hook
Unit ladder: heigh + floo = is θ + θ = 1. Divide by θ for the tan and sec one, by θ for the cot and csc one.
Flash cards
Say the answer out loud, then flip.
What is an identity?
Write the three reciprocal identities.
- csc θ =
- sec θ =
- cot θ =
How do you get θ + 1 = θ from θ + θ = 1?
Is sin θ + cos θ = 1 for every angle?
Lesson 4 of 10
The special angles: 30°, 45° and 60°
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Picture cutting a square sandwich along its diagonal. Each half is a right triangle with two equal legs and two 45° corners. A second useful shape comes from cutting an equilateral triangle, a triangle with three equal sides, down the middle. Each half has a 30° corner and a 60° corner. These are the two special triangles. They give exact values, answers with fractions and square roots, for the special angles 30°, 45° and 60°. In radians those angles are , and . You can rebuild their values by drawing the triangles and reading the side ratios. You do not need six unrelated lists.
Explain it like I am five
Picture a yield sign, a triangle with three equal sides, each 2 feet. Its equal angles share 180°, so each is 60°. Fold it in half through one corner: the far side splits into 1 and 1, that corner's 60° into 30° and 30°. Each half is a right triangle with hypotenuse 2, short leg 1 and long leg = ≈ 1.73 ( is the number that times itself makes 3).
Stand at the 30° corner. The short leg, 1, is across from you, so sin 30° = . The long leg, , touches you, so cos 30° = . At the 60° corner the legs swap: sin 60° = and cos 60° = .
For 45°, fold a square napkin with sides 1 corner to corner. Each half has legs 1 and 1 and a diagonal of = , so sin 45° = cos 45° = . Multiplying top and bottom by gives ≈ 0.707. These are the special angles: their values come out exact.
2 Picture it
Reminder
Reminder: SOH-CAH-TOA, Rationalizing, Coterminal angles
- SOH-CAH-TOA. Sine is opposite over hypotenuse, cosine is adjacent over hypotenuse and tangent is opposite over adjacent. With opposite 4 and hypotenuse 8, sine is = .
- Rationalizing. × = ; multiplying by a fraction equal to 1 preserves the value.
- Coterminal angles. A full turn ends on the same ray: 405° − 360° = 45°. The same ray gives the same triangle ratios.
3 Why
A square with side 1 has a diagonal of = . That diagonal halves two square corners, making 45° angles. An equilateral triangle with sides 2 has three equal angles: 180° ÷ 3 = 60° each. Its middle cut halves the base into lengths 1 and 1, and halves the top corner into two 30° angles. Each half therefore has hypotenuse 2 and long leg = . The short leg faces 30°. Enlarging either triangle multiplies every length by the same number, which cancels from every side ratio.
4 The rule
: sides 1, 1, .
: the side across from is 1, across from is , across from is 2. ; the cosines are the same list in reverse order. For an angle that makes full turns and then ends on an acute ray, we define its trig values to be those of that acute direction; this extends the triangle definition using the terminal side.
The same idea, five ways
Say thirty degrees, forty-five degrees and sixty degrees. Say root two over two for .
The side ratios of the two special triangles give exact values for three special angles.
- 45° triangle: 1, 1,
- 30° triangle: opposite 1, adjacent , hypotenuse 2
Two sandwich cuts give reusable triangle patterns.
The same idea, other ways
A diagonal cuts a square into the equal-leg triangle. A middle cut splits an equilateral triangle into the short-leg and long-leg triangle. Keep those two pictures; their side lengths rebuild the reference table.
For the three acute special angles, place , and over 2 in increasing angle order. Read the three results in the table. This memory device is for these named angles; it is not a formula for other angles.
The 30° and 60° corners share one triangle. When you walk to the other corner, opposite and adjacent exchange places. Therefore sin 30° = cos 60° and sin 60° = cos 30°. In the equal-leg triangle sine and cosine agree.
| θ | radians | sin θ | cos θ | tan θ | cot θ | sec θ | csc θ |
|---|---|---|---|---|---|---|---|
| 30° | 2 | ||||||
| 45° | 1 | 1 | |||||
| 60° | 2 |
Part 1: The equal-leg 45°, 45°, 90° triangle
Cut a square diagonally, from one corner to the opposite corner. The two perpendicular sides become equal legs. From either acute corner, opposite and adjacent have the same length, so sine and cosine match.
- Rule: the side proportions are 1, 1 and .
- Rule: equal opposite and adjacent legs give tan = cot = 1.
- Rule: sin = cos = and sec = csc = .
Worked example
Read cosine from an enlarged equal-leg triangle
An acute angle γ has adjacent leg 6, opposite leg 6 and hypotenuse 6. Find cos γ. In words, compare the touching leg with the longest side.
Show the steps and the answer
- .Cosine is adjacent over hypotenuse; divide top and bottom by 6.
- .Multiply top and bottom by , which squares to 2.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Equal legs mean equal sine and cosine.
Part 2: The short-leg 30°, 60°, 90° triangle
Split an equilateral triangle down the middle. The 30° corner faces the short leg. The 60° corner faces the long leg. Stand at the requested corner before deciding which length goes on top.
- Rule: short leg, long leg and hypotenuse have proportions 1, and 2.
- Rule: the short leg faces 30°; the long leg faces 60°.
- Rule: exchanging these two corners exchanges sine and cosine.
Worked example
Name the corner before using tangent
An acute angle β has opposite leg 3, adjacent leg 3 and hypotenuse 6. Find tan β. In words, compare the facing leg with the touching leg.
Show the steps and the answer
- Divide all lengths by 3: opp , adj , hyp .The common scale factor preserves every ratio.
- .Tangent uses opposite over adjacent; cancel the 3 and rationalize.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write opp and adj beside the two legs before forming tangent.
Part 3: Full turns followed by an acute direction
Think of a compass pointer spinning twice before it points northeast. Its final direction is unchanged. We extend the acute triangle definition by choosing trig values from the final direction, rather than from the number of full turns. When that direction is acute, use the right triangle at that angle. The point lesson will extend this choice to every direction.
- For an acute final direction, removing full turns keeps all six trig values.
- 765° − 360° − 360° = 45°, so 765° uses the 45° triangle.
Reminder
Reminder: Coterminal
- Coterminal. Coterminal angles have the same terminal side because they differ by full turns.
The same idea, five ways
Full turns do not change a trig value when the final direction is the same acute ray.
We extend the acute-angle functions by assigning the same outputs to angles with that terminal side.
- sec 765° = sec 45° =
A compass pointer gives the same direction after two complete spins.
Worked example
Two full turns before reading a ratio
Find sec 765° exactly. In words, remove two complete turns and compare the hypotenuse with the adjacent leg.
Show the steps and the answer
- ; .Each full turn keeps the terminal ray, and our extension assigns its acute-direction values.
- At , adj and hyp , so .Secant is hypotenuse over adjacent in the shared equal-leg triangle.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Reduce the angle first, then check whether the final ray is acute.
5 How
- Sketch the triangle that contains your angle and write its three sides.
- Stand at your angle and name opp, adj and hyp.
- Read sin, cos and tan with SOH-CAH-TOA.
- Flip for csc, sec and cot, and rationalize.
- Use the sine reference diagram for the three acute special angles: each input and its exact output share one column. The axis lesson will add the two endpoint columns at 0° and 90°.
Rebuild an exact special-angle value
- Identify the special angle and choose its special triangle.
- For an extra full turn, remove that turn first: 390° − 360° = 30°. The same ray gives the same acute triangle.
- Label opposite, adjacent and hypotenuse from the selected corner.
- Use the function's side ratio, reduce, then rationalize its denominator.
- Check the result with a reciprocal product or the Pythagorean identity.
6 Worked example
Worked example
Read six ratios from a scaled special triangle
A right triangle has opposite leg 4, adjacent leg 4 and hypotenuse 8, with respect to β. Find all six functions. In words, turn these three lengths into six ratios.
Show the steps and the answer
- opp , adj , hyp .The question identifies the legs relative to β.
- ; .Sine uses opposite over hypotenuse; cosine uses adjacent over hypotenuse. Divide top and bottom by 4.
- ; .Tangent and cotangent compare the legs in opposite orders.
- ; .Use hypotenuse over adjacent and hypotenuse over opposite; rationalize the last denominator.
- cot β =
- sec β = 2
- csc β =
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
One ratio from equal legs
An acute angle has opposite leg 3, adjacent leg 3 and hypotenuse 3. Find its sine. In words, divide the facing length by the longest length.
Show the steps and the answer
- .Sine is opposite over hypotenuse, and the 3 cancels.
- .Multiply top and bottom by .
Rung 2 of 5
A full turn before a reciprocal
Find cot 390° exactly. In words, remove a full turn and compare adjacent with opposite.
Show the steps and the answer
- .A full turn returns to the same ray, so the acute triangle ratios agree.
- For that corner, opp , adj , hyp .The shortest leg faces the 30° corner.
- .Cotangent is adjacent over opposite.
Rung 3 of 5
Rationalize an equal-leg reciprocal
Find sec 405° exactly. In words, find hypotenuse over adjacent after removing a full turn.
Show the steps and the answer
- .A full turn ends on the same ray, so use the equal-leg triangle.
- .Adjacent over hypotenuse is 1 over ; multiply top and bottom by .
- .Secant flips the nonzero cosine; rationalize with and reduce.
Rung 4 of 5
All six after a full turn
Find all six functions of 420° exactly. In words, return to the same acute ray and write the six side ratios.
Show the steps and the answer
- .One full turn changes neither the final ray nor its side ratios.
- opp , adj and hyp .At 60° the long leg is across from the corner.
- .Apply SOH-CAH-TOA.
- .Flip the first three ratios and rationalize root denominators.
- cot 420° =
- sec 420° = 2
- csc 420° =
Rung 5 of 5
Combine two exact products
Find cos 390° sin 420° + sin 390° cos 420° exactly. In words, evaluate the four functions, multiply each pair and add.
Show the steps and the answer
390° shares the 30° ray
420° shares the 60° ray
- shares the ray; shares the ray.Subtract 360° from each angle before reading its triangle.
- .The root factors multiply to 3.
- .Multiply fraction tops and bottoms.
- .The bottoms match, so add the tops.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Sketch the two special triangles first. Rebuild cot, sec and csc by flipping their partners.
- The shortest leg faces the smallest angle. This keeps the 30° and 60° values in order.
- The sine ladder's cosines run backward; use that as a check after identifying the angle.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
- The special values check the earlier warning: sin 45° + cos 45° = ≈ 1.414, not 1.
7 The trap
Swapping the 30° and 60° values. The shortest side, 1, faces the smallest angle, 30°, so sin 30° = is the small sine and sin 60° = (about 0.866) is the large one. From 0° to 90°, sine grows as the angle grows.
Keep in mind
- The shortest side faces the smallest angle: 1 faces 30°, ≈ 1.73 faces 60°, and 2 faces the 90° corner.
- The cosines are the sines read backward: cos 30° = sin 60° = and cos 60° = sin 30° = .
- and are the same number, about 0.577, and multiplying top and bottom by turns the first into the rationalized second.
- On your cheat sheet, draw the two triangles with sides 1, 1, and 1, , 2, and label the angles , , in radians too: every value rebuilds from them.
Memory hook
Count 0 to 4 under the root: the sines of 0°, 30°, 45°, 60°, 90° are , , , , . Cosine reads the list backward.
Flash cards
Say the answer out loud, then flip.
What are the sides of the 45°, 45°, 90° triangle?
What are the sides of the 30°, 60°, 90° triangle, and which side faces 30°?
A 12-foot ladder leans at 30° to the floor. How high up the wall does it reach?
A square has sides 5. How long is its diagonal?
What are 30°, 45° and 60° in radians?
Is sin 60° = ?
Lesson 5 of 10
Using the identities: rewrite and prove
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
You can pay the same amount with a $5 bill or five $1 bills. An identity makes a similar trade: you replace an expression with an equal expression wherever both are defined. A domain is the collection of allowed inputs. A common domain consists of inputs allowed by both expressions. Rewriting asks you to express one function using only another. Proving an identity, also called verifying it, asks you to show why two expressions agree for every allowed angle. You start with a side you understand, rewrite it through equal expressions and arrive at the other side. The left side, or LHS, is before the equals sign. The right side, or RHS, is after it.
Explain it like I am five
Proving an identity, an equation true for every allowed angle, is like showing 4 quarters and 100 pennies are the same dollar: trade for equal pieces until one side matches the other. LHS is the left-hand side of the equals sign, RHS the right-hand side. A one-side chain rewrites only one side, LHS = step = step = RHS, with a reason at each step.
Prove (1 − cos θ)(1 + cos θ) = θ. Start on the LHS, the busier side. Multiply out, each part times each part: 1 + cos θ − cos θ − θ = 1 − θ, since the middle terms cancel (the difference of squares: (a − b)(a + b) = − ). Subtracting θ from both sides of θ + θ = 1 gives 1 − θ = θ. So LHS = θ = RHS.
Check at 30°: (1 − )(1 + ) = 1 − = , and 30° = ( = . The check catches slips; the chain is the proof, since each step holds for every angle.
2 Picture it
Reminder
Reminder: Common denominators, Difference of squares, Nonzero cancellation, Root signs
- Common denominators. + = + = ; multiply top and bottom to make equal bottoms.
- Difference of squares. (1 + u)(1 − u) = 1 − because the +u and −u terms cancel.
- Nonzero cancellation. = b requires a ≠ 0. = 3, while division by 0 has no value.
- Root signs. = gives x = ±; an acute angle makes cosine positive.
3 Why
A one-side chain displays the reason for every equality, so a reader can follow it without assuming the desired conclusion. Working on both sides can also be valid if every step is reversible on the stated domain. But dividing by something that might be zero can discard cases, and reducing a claimed equation to a true statement does not prove it unless you justify reversing every step. Sine and cosine give all six functions a shared language. Then the Pythagorean identity replaces complicated squares with 1, or replaces 1 minus one square with the other.
4 The rule
For an acute angle, and .
An identity holds on its common domain. Use when dividing by and when dividing by .
The same idea, five ways
Say prove the identity: show that the two expressions agree for every allowed input.
A proof rewrites equal expressions on the original common domain.
- LHS = expression = expression = RHS
- cos θ ≠ 0 for tan θ and sec θ
- sin θ ≠ 0 for cot θ and csc θ
Exchange one payment for another of equal value, keeping track of each exchange.
Start with LHS
Rewrite with known equalities
Arrive at RHS
The same idea, other ways
Five dollar bills and one five-dollar bill look different but have the same value. Rewrite an expression without changing its value, and give the reason for each exchange.
LHS = expression = expression = RHS is a path whose links all have reasons. A matching final expression proves equality for every input on the stated domain.
sec θ cos θ
= 1, with cos θ ≠ 0
Replace sec with 1 over cosine, csc with 1 over sine, tangent with sine over cosine and cotangent with cosine over sine. Now all fractions use only two ingredients.
cot θ =
sec θ =
csc θ =
Part 1: Rewrite using only one function
The words in terms of mean use this ingredient and no other trig function. If sine is the ingredient, use the Pythagorean identity to replace cosine. An acute angle selects the positive root.
- Rule: for 0° < θ < 90°, cos θ = .
- Rule: for that same acute angle, tan θ = .
- Rule: for a general angle, solving a square gives both root signs until angle information selects one.
cos θ = , acute θ
Worked example
Use a fresh acute sine value
θ is acute and sin θ = . Find cos θ and tan θ. In words, rebuild the missing cosine from the identity, then divide sine by cosine.
Show the steps and the answer
- .Subtract the squared sine from 1, written as .
- .An acute cosine is positive; the principal root gives this value.
- .Use the quotient identity, cancel the shared bottom and rationalize.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the acute-angle condition next to the positive root.
Part 2: Prove (verify) an identity
Prove means show why the statement holds for every input where its original expressions have values. A chain from one side to the other makes each reason visible. You do not need to guess the angle.
- Rule: rewrite using already established identities.
- Rule: every cancelled denominator factor must be nonzero.
- Strategy: a one-side chain is convenient; reversible two-side reasoning can also be valid when justified.
sec θ cos θ
= 1, cos θ ≠ 0
Worked example
A one-flip proof
Prove sec θ cos θ = 1 where cos θ ≠ 0. In words, show that cosine multiplied by its reciprocal gives 1.
Show the steps and the answer
cos θ ≠ 0
- .The reciprocal identity is valid for cos θ ≠ 0.
- .The same nonzero number divided by itself equals 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write LHS at the start and RHS at the end of the chain.
5 How
- State the allowed inputs before rewriting: tan and sec need cos θ ≠ 0; cot and csc need sin θ ≠ 0. A displayed fraction also needs its denominator nonzero.
- Pick the messier side, usually the one with more terms or fractions.
- Rewrite every tan, cot, sec and csc using sin θ and cos θ.
- Combine fractions over a common denominator, or multiply out brackets.
- Replace 1 − θ with θ, 1 − θ with θ, and θ + θ with 1.
- Cancel common factors only when those factors are nonzero. Stop at the other side; preserve the original allowed inputs.
Rewrite or prove without changing the domain
- Translate the question: rewriting changes the ingredients; proving establishes equality.
- Record all original nonzero denominators.
- Choose one side and rewrite all functions with sine and cosine.
- Combine fractions or expand brackets with a reason.
- Use the Pythagorean identity and cancel only nonzero factors.
- End at the requested expression and retain the domain restrictions.
6 Worked example
Worked example
Prove sec θ − cos θ = sin θ tan θ
Prove sec θ − cos θ = sin θ tan θ for cos θ ≠ 0. In words, rewrite the left expression until it becomes the right expression.
Show the steps and the answer
cos θ ≠ 0
- Work where .Both sec θ and tan θ divide by cosine; this records the original domain before any cancellation.
- LHS .The left side has more pieces, so start there. Reciprocal identity: sec θ = .
- .cos θ ≠ 0 lets you multiply cosine by , which equals 1. Match the bottoms, then subtract the tops.
- .Pythagorean identity: 1 − θ = θ.
- RHS.Split θ into sin θ × sin θ, and = tan θ.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Rearrange the identity
Prove 1 − θ = θ. In words, isolate the sine square in the known identity.
Show the steps and the answer
- .This is the established Pythagorean identity.
- .Subtract θ from both sides of a known true equation.
- .Equality can be read in either order.
Rung 2 of 3
One reciprocal and a cancellation
Prove sec θ cos θ = 1 for cos θ ≠ 0. In words, replace secant with its definition.
Show the steps and the answer
cos θ ≠ 0
- LHS .Secant is reciprocal cosine on this domain.
- RHS.The denominator and cancelled factor are nonzero.
Rung 3 of 3
Proving a difference of two tan fractions equals 2 csc θ
Prove the identity − = 2 csc θ. Begin by stating the values of θ for which the identity is claimed, and give a reason for every cancellation you make.
Show the steps and the answer
- State the allowed inputs. needs . The denominators and must be nonzero, so and . Since exactly when , so this condition is . also needs . The identity is therefore claimed for all with and , that is, is not a multiple of .An identity holds only on its common domain. Every tan, every csc and every displayed denominator adds a condition, and these conditions are what make the later cancellation legal.
- Work on the left side, , and aim for .The left side has two fractions and two tan terms, while the right side is a single term, so the left side is the messier side.
- Rewrite as in both terms: , and in the same way .Once the expression contains only sin θ and cos θ, the Pythagorean identity can act on it. Dividing by 1 − cos θ multiplies the two denominators together.
- Use the common denominator . Multiply the top and bottom of the first fraction by , and the top and bottom of the second by . The numerator becomes .Two fractions can be subtracted only over a shared denominator. Both denominators already contain cos θ and differ only in the factors 1 − cos θ and 1 + cos θ, which are nonzero on the domain.
- Multiply out the denominator: , so the left side is . Replace with to get .(1 − cos θ)(1 + cos θ) is a difference of squares, and θ + θ = 1 rearranges to 1 − θ = θ.
- Write the denominator as and cancel the common factor : .On the stated domain sin θ ≠ 0 and cos θ ≠ 0, so sin θ cos θ ≠ 0, and dividing the top and bottom by it is allowed.
- Rewrite . This is the right side, so stop. Conclude that the identity holds for all with and .csc θ = . Keep the original allowed inputs: 2 csc θ on its own is also defined where cos θ = 0, but the left side is not defined there.
Work to write
- Domain: cos θ ≠ 0 (for tan θ) and sin θ ≠ 0 (for 1 − cos θ ≠ 0, 1 + cos θ ≠ 0 and csc θ), so θ is not a multiple of 90°
- LHS = −
- = , using 1 − θ = θ
- = , cancelling sin θ cos θ ≠ 0
- = 2 csc θ = RHS, for all θ with sin θ ≠ 0 and cos θ ≠ 0
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Begin with the domain and a one-side chain. Put a reason beside every equality.
- A product can lose a common factor; a sum must first be split or factored.
- Try a permitted special angle after proving the identity. It can expose an arithmetic error.
7 The trap
Testing one angle and calling the identity proved. One angle can agree by coincidence; a proof needs algebra that works for every θ. Use a test angle only to check your algebra afterward.
Keep in mind
- LHS is everything left of the equals sign and RHS everything right of it: in tan θ · cos θ = sin θ, the LHS is tan θ · cos θ.
- Cancel only factors (things multiplied), never terms (things added): = sin θ, but must be split into tan θ + 1.
- "Respectively" means in the same order: θ + θ, 1 − θ and 1 − θ become 1, θ and θ, respectively.
- One matching angle proves nothing: sin θ = cos θ holds at 45° but fails at 30°, so it is not an identity.
Memory hook
MSS: start on the Messy side, rewrite everything in Sine and cosine, Swap the squares (1 − θ = θ), and stop when it matches the other side.
Flash cards
Say the answer out loud, then flip.
What do LHS and RHS mean?
What is a one-side proof chain?
What does "express cos θ in terms of sin θ" mean for an acute θ?
Simplify , where cos θ ≠ 0.
Rewrite cot θ × sin θ in sine and cosine, then simplify (sin θ ≠ 0).
Both sides of an equation give the same number at 45°. Is it proved?
Lesson 6 of 10
Definition 2: a point on the terminal side
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Think of a map with your home at (0, 0), the origin. An address P(x, y) tells you how far right or left to walk, then how far up or down. The straight route home has positive length r. To describe an angle such as 120°, put its corner at home and start its rotation pointing right. This is standard position. Its ending ray is the terminal side. Choose any address on that ray except home. Sine compares the up-down coordinate with r, and cosine compares the left-right coordinate with r. Coordinates can carry minus signs even though distance cannot. That extends the triangle ratios to every angle.
Explain it like I am five
Picture a map with home at (0, 0), the origin. The address P(−15, 8) means walk 15 blocks left, then 8 up. Those numbers are coordinates, signed distances, not the axes: x = −15 is negative because it points left, y = 8 positive because it points up.
Put θ in standard position: corner at home, starting side pointing right, and a positive angle turning counterclockwise, against a clock's hands. Its terminal side, the ray (half-line) where the turn stops, runs from home through P. The distance home is r = = = = 17. A distance is never negative, and you never pick home, so r > 0.
Why sine uses y: for an angle under 90°, dropping a line from P to the x-axis makes a right triangle whose up-down leg y is opposite θ and sideways leg x is adjacent. So sin θ = and cos θ = . Larger angles keep them, signs included: sin θ = , cos θ = −, tan θ = = −.
2 Picture it
Reminder
Reminder: Squaring negatives, Signed division, Positive square root, Division by zero
- Squaring negatives. (−5 = (−5) × (−5) = 25. Keep parentheses around a negative coordinate before squaring.
- Signed division. A positive over a negative is negative: = −. Two negatives give a positive ratio.
- Positive square root. = 13. Although = 169 has two solutions, a distance selects the positive one.
- Division by zero. = 0 because 0 × 4 = 0. has no value because no number times 0 gives 4.
3 Why
For an acute angle, drop a perpendicular from P to the x-axis. The resulting right triangle has adjacent leg x, opposite leg y and hypotenuse r. The fractions therefore agree with the triangle definition. A positive enlargement multiplies x, y and r by the same factor, which cancels in every ratio, so choosing another point on the same ray changes nothing. Larger angles keep the signed coordinates. Pythagorean distance gives r = ; because the origin is excluded, r > 0. A zero x or y remains possible, so check each denominator.
4 The rule
.
(), (), (), ().
The same idea, five ways
Say sine is y over r and cosine is x over r. Say r is the positive distance to the origin.
A point other than the origin (0, 0) on an angle's terminal side supplies its six signed coordinate ratios.
- tan θ = , sec θ = , x ≠ 0
- cot θ = , csc θ = , y ≠ 0
A signed map address and the positive straight route home.
The same idea, other ways
Coordinates tell direction: negative x means left, negative y means down. Distance tells length, so r stays positive. Write the coordinate signs before you calculate.
Moving from (−5, 12) to (−10, 24) doubles the signed coordinates and the distance, from 13 to 26. Every numerator and denominator doubles, so the fractions agree.
For an acute angle, x is adjacent, y is opposite and r is hypotenuse. Signed coordinates let the same formulas continue when the angle no longer fits inside a right triangle.
Each function asks for a division. Its denominator decides whether an answer exists. For P(0, −4), r is 4: sine divides by 4, but tangent would divide by 0.
For any non-origin point, r > 0 and = + . The definitions give sin θ = and cos θ = . Squaring and adding gives + = = = 1. Negative coordinate signs disappear when squared, so the same Pythagorean identity holds in every direction.
= + , with r > 0
| Function | Domain (θ in radians) | Undefined when |
|---|---|---|
| sin θ, cos θ | All real θ: −∞ < θ < ∞, or (−∞, ∞) | Never: the point you chose (never the origin) has r > 0. |
| tan θ, sec θ | θ ≠ ± nπ, equivalently θ ≠ + nπ, with n any integer; in degrees θ ≠ 90° + n·180° | Terminal side on the y-axis: x = 0 and cos θ = 0. |
| cot θ, csc θ | θ ≠ ± nπ, equivalently θ ≠ nπ, with n any integer; in degrees θ ≠ n·180° | Terminal side on the x-axis: y = 0 and sin θ = 0. |
Part 1: r (distance to the origin)
Coordinates are directions and lengths combined. A negative coordinate sends you left or down. The straight route back to the origin is a length, so find it from squared coordinates and take the positive root.
- Rule: exclude P(0, 0).
- Rule: r = > 0.
- Rule: only positive scaling keeps a point on the same terminal ray.
Worked example
Find the radius from a signed point
Find the distance from the origin to P(4, −5). In words, turn the signed address into two positive leg lengths.
Show the steps and the answer
- and .A negative times a negative is positive.
- .The Pythagorean theorem gives the straight distance; keep the positive root.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Square the coordinates before adding them.
Part 2: Sine from y and r
Use the map address to compare up-down position with straight distance. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.
- Rule: sin θ = .
- When it works: always, because r (the distance from the origin to your point) is never 0 for every point except the origin.
Worked example
Sine from y and r: one address
For P(4, −5) on a terminal side, find sin θ. In words, compare up-down position with straight distance.
Show the steps and the answer
- .Distance uses the squared coordinates and the positive root.
- .Sine compares the signed y-coordinate with positive r, so this value is negative.
- .Multiply top and bottom by ; its square gives a rational denominator of 41.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The sine follows y because its denominator is positive.
Part 3: Cosine from x and r
Use the map address to compare left-right position with straight distance. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.
- Rule: cos θ = .
- When it works: always, because r (the distance from the origin to your point) is never 0 for every point except the origin.
Worked example
Cosine from x and r: one address
For P(4, −5) on a terminal side, find cos θ. In words, compare left-right position with straight distance.
Show the steps and the answer
- .Distance uses the squared coordinates and the positive root.
- .Cosine compares the signed x-coordinate with positive r; both are positive.
- .Multiply top and bottom by , whose square is 41.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The cosine follows x because its denominator is positive.
Part 4: Tangent from y and x
Use the map address to compare up-down position with left-right position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.
- Rule: tan θ = .
- It only works when x ≠ 0: x is on the bottom, and you cannot divide by 0.
Worked example
Tangent from y and x: one address
For P(4, −5) on a terminal side, find tan θ. In words, compare up-down position with left-right position.
Show the steps and the answer
- and .Tangent's denominator is x, so this address permits the division.
- .Compare signed rise with run; a negative over a positive is negative. Tangent does not need r.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Opposite coordinate signs give a negative tangent.
Part 5: Cotangent from x and y
Use the map address to compare left-right position with up-down position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.
- Rule: cot θ = .
- It only works when y ≠ 0: y is on the bottom, and you cannot divide by 0.
Worked example
Cotangent from x and y: one address
For P(4, −5) on a terminal side, find cot θ. In words, compare left-right position with up-down position.
Show the steps and the answer
- and .Cotangent's denominator is y, so this address permits the division.
- .Compare signed run with rise; a positive over a negative is negative. Cotangent does not need r.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use x over y directly, including when tangent has no value.
Part 6: Secant from r and x
Use the map address to compare straight distance with left-right position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.
- Rule: sec θ = .
- It only works when x ≠ 0: x is on the bottom, and you cannot divide by 0.
Worked example
Secant from r and x: one address
For P(4, −5) on a terminal side, find sec θ. In words, compare straight distance with left-right position.
Show the steps and the answer
- .Distance comes from squared coordinates and is positive.
- .Secant is distance over x. Here x = 4 ≠ 0, and the root is already on top, so no rationalization is needed.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The secant has the same sign as the nonzero cosine.
Part 7: Cosecant from r and y
Use the map address to compare straight distance with up-down position. Write the signed coordinates before taking the ratio. The denominator's condition tells you when that division is possible.
- Rule: csc θ = .
- It only works when y ≠ 0: y is on the bottom, and you cannot divide by 0.
Worked example
Cosecant from r and y: one address
For P(4, −5) on a terminal side, find csc θ. In words, compare straight distance with up-down position.
Show the steps and the answer
- .Distance comes from squared coordinates and is positive.
- .Cosecant is distance over y. Here y = −5 ≠ 0, so the positive distance divided by negative y gives a negative value.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The cosecant has the same sign as the nonzero sine.
Part 8: Domains: all real inputs and the skipped axis families
A domain is the list of inputs a function can accept. Sine and cosine divide by positive r, so every real angle works. Other functions divide by x or y and skip the angles where that coordinate is zero. There are infinitely many skipped angles because another half turn lands on the same axis.
- Rule: sine and cosine have domain (−∞, ∞), also written −∞ < θ < ∞.
- Notation: ∞ means without bound. It is not a real endpoint, so interval notation uses parentheses.
- Rule: tan and sec exclude θ = + nπ, or 90° + n·180°.
- Rule: cot and csc exclude θ = nπ, or n·180°.
- Notation: n is any integer, ..., −2, −1, 0, 1, 2, ... . The notes' ± notation lists the same families.
- Rule: an original zero denominator means undefined, never zero.
tan, sec: θ ≠ + nπ
cot, csc: θ ≠ nπ
n is any integer
Worked example
Check an angle against an excluded family
At θ = , which functions are undefined? In words, determine the final axis and see which denominators become zero.
Show the steps and the answer
- .This matches the tangent/secant excluded family with the integer n = 3.
- The terminal side is on the y-axis, so and .Each extra π is a half turn and stays on the same axis.
- Tangent and secant are undefined.Both have zero x in their denominator; the other four have nonzero r or y bottoms.
- tan : undefined
- sec : undefined
- The other four functions are defined.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Identify the coordinate in the denominator, then identify the axis that makes it zero.
5 How
- Write down x and y with their signs.
- Find r = and simplify the root. r is always positive.
- sin θ = and cos θ = : reduce, then rationalize.
- tan θ = and cot θ = : r is not involved.
- sec θ = and csc θ = : the flips of cos and sin.
- Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.
Find signed trig values from a terminal point
- Check that the point is not the origin and keep both coordinate signs.
- Compute the positive distance r from the squared coordinates.
- Before dividing, identify which of x and y are zero.
- Use each coordinate ratio; write undefined whenever its denominator is zero.
- Reduce and rationalize; check signs from the coordinates and check θ + θ = 1.
6 Worked example
Worked example
All six values from the point P(-6, -9)
The terminal side of an angle θ in standard position passes through the point P(-6, -9). Find the exact values of sin θ, cos θ, tan θ, cot θ, sec θ and csc θ. Simplify every square root and leave no square root in a denominator.
Show the steps and the answer
- Write the coordinates of P with their signs: .Definition 2 works with any point (x, y) on the terminal side other than the origin. The minus signs stay attached to the numbers because they decide the signs of the answers.
- .r is the distance from the origin to P, so it is the positive root, and squaring removes both minus signs. 9 is the largest perfect square that divides 117, so = · = 3.
- . .Cancel the common factor 3 first so the numbers stay small. Then multiply by , which equals 1, to clear the root from the denominator, since · = 13.
- and .These two use only the coordinates, so r is not involved and no root appears. Both are defined because x = -6 ≠ 0 and y = -9 ≠ 0. A negative divided by a negative is positive, and the common factor 3 cancels.
- and .sec θ and csc θ are the flips of cos θ = and sin θ = . With r on top, the root is already in the numerator, so after cancelling the 3 there is nothing to rationalize.
- Check each sign: . and each pair r with one negative coordinate, so all four are negative. and divide one negative coordinate by the other, so both are positive. The values found agree.A ratio is negative exactly when its numerator and denominator have opposite signs. r is always positive, so a ratio that uses r takes the sign of the coordinate in it.
Work to write
- x = -6, y = -9
- cot θ = =
- sec θ = = -
- csc θ = = -
- x < 0 and y < 0 with r > 0: sin, cos, sec, csc negative; tan, cot positive
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
Positive coordinates and a whole-number distance
P(4, 3) is on a terminal side. Find all six functions. In words, turn its positive address into six ratios.
Show the steps and the answer
- .Square the coordinates, add and take the positive root.
- .Use , and .
- .Use , and ; none of these bottoms is zero.
- cot =
- sec =
- csc =
Rung 2 of 5
One negative coordinate and reducible ratios
P(−6, 8) is on a terminal side. Find all six functions. In words, keep the negative x while reducing the six ratios.
Show the steps and the answer
- .The negative coordinate squares to a positive number.
- .Substitute with signs, then reduce.
- .The reciprocal ratios keep their coordinate signs.
- cot = −
- sec = −
- csc =
Rung 3 of 5
A large point and a small equivalent point
P(9, −12) is on a terminal side. Find all six functions. In words, find the distance and reduce ratios without dropping the negative y.
Show the steps and the answer
- .Squares erase the coordinate signs; distance uses the positive root.
- .Use , and and divide common factors.
- .Use , and with the original signs.
- cot = −
- sec =
- csc = −
Rung 4 of 5
Two negatives and an irrational distance
P(−5, −7) is on a terminal side. Find all six functions. In words, preserve both negative coordinates and rationalize the ratios with r on the bottom.
Show the steps and the answer
- .Distance stays positive, and 74 has no perfect-square factor above 1.
- .Multiply top and bottom by to rationalize.
- .Two negatives give a positive ratio.
- .A positive distance over a negative coordinate gives a negative value.
- cot =
- sec = −
- csc = −
Rung 5 of 5
A zero coordinate changes which values exist
P(0, −4) is on a terminal side. Find all six functions. In words, check every bottom before deciding whether to write a value or undefined.
Show the steps and the answer
- .The point is not the origin, so its distance is positive.
- and .Their denominator r is nonzero; a zero numerator gives zero.
- and are undefined.These two divide by x = 0.
- and .Their denominator y is nonzero.
- cos = 0
- tan: undefined
- cot = 0
- sec: undefined
- csc = −1
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write x, y and r separately before forming any fractions.
- Check denominators before rationalizing; no rewriting repairs division by zero.
- Choose a small convenient point on the same ray when the problem lets you.
- Read signs directly from the coordinate fractions here; the next sign lesson collects them into a quadrant table.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.
Keep in mind
- r is a distance, so it is always positive: for P(−9, −12), r = = 15, never −15.
- Every minus sign in an answer comes from x or y: for P(−15, 8), cos θ = − is negative because x is negative.
- Any point on the same ray gives the same six values: P(−30, 16) has r = 34 and sin θ = = , the same as P(−15, 8).
- A zero coordinate can still put a 0 on the bottom: for P(0, 5), tan θ = is undefined.
Memory hook
Alphabetical: c comes before s as x comes before y, so cosine takes x and sine takes y: cos θ = , sin θ = .
Flash cards
Say the answer out loud, then flip.
What is standard position?
What is the terminal side of an angle?
What is r, and can it be negative?
P(−24, −7) is on the terminal side of θ. Find r, sin θ and cos θ.
Why is sin θ = and not ?
P(−7, −24) is on the terminal side. Is r = −25?
Lesson 7 of 10
Quadrantal angles and undefined values
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Picture a clock hand stopping exactly at the top, bottom, left or right. An angle whose ending ray lies on an axis is called a Quadrantal angle. Extra full turns leave that ending ray in the same place. Instead of squeezing an angle on an axis into a triangle, choose the point one unit from the center: (1, 0), (0, 1), (−1, 0) or (0, −1). Its distance r is 1. Sine reads the up or down coordinate y; cosine reads the right or left coordinate x. For the other four functions, inspect the bottom of the fraction. A zero bottom means Undefined, which means no value. A zero top over a nonzero bottom gives the number zero.
Explain it like I am five
Picture a clock hand stopping at 3, 12, 9 or 6. An angle whose terminal side lies on an axis is a quadrantal angle. Use the point one step out, (1, 0), (0, 1), (−1, 0) or (0, −1), where r = 1, so sin θ = y and cos θ = x.
Try 450°. Remove a full turn: 450° − 360° = 90°. 450° and 90° are coterminal: they end on one ray and share every value, straight up at (0, 1). So sin 450° = 1 and cos 450° = 0. But tan 450° = = is undefined: no value exists. Yet cot 450° = = 0 is fine.
Why: = 4 because 4 × 2 = 8, but no number times 0 makes 1. tan and sec (bottom x) fail on the y-axis, where x = 0: 90° + n·180°. cot and csc (bottom y) fail on the x-axis, where y = 0: n·180°. Here n counts half turns: positive, negative or zero. Such angles lie outside the function's domain, its allowed inputs.
2 Picture it
Reminder
Reminder: Coterminal angles, Signed division, Radians
- Coterminal angles. A full turn changes the travel but not the ending ray: −450° + 720° = 270°.
- Signed division. Zero divided by a nonzero negative number is still zero: = 0.
- Radians. π radians = 180°. A full turn is 2π radians, so − + 4π = .
3 Why
Division asks for a number that undoes multiplication. = 4 because 4 × 2 = 8. To give a value, that value times 0 would have to make 1. Every number times 0 is 0, so none works. Tangent and secant divide by x and fail on the y-axis. Cotangent and cosecant divide by y and fail on the x-axis. Sine and cosine divide by r = 1, so they work at every axis point.
4 The rule
and at the axis points with .
and are undefined at ; and are undefined at , where n is any integer (positive, negative or zero). In radians these are and .
The same idea, five ways
An axis angle ends exactly right, up, left or down. A zero denominator means undefined.
A Quadrantal angle has its terminal side on an axis; its sine and cosine still have values.
- θ = n·90°, with n any integer
- x = 0: tan and sec are undefined
- y = 0: cot and csc are undefined
- = 0; is undefined
A clock hand can stop exactly at one of the four main directions.
The same idea, other ways
Start pointing right, as a clock hand points at 3. A quarter turn counterclockwise points up, a half turn left, and three quarters down. Complete turns do not change the stopping place.
At an axis point one coordinate is zero. Write the six fractions before deciding which are undefined. At (0, 1), tangent is and has no value, while cotangent is = 0.
Point (0, 1): x = 0, y = 1
tan = : undefined
cot = = 0
The special triangles supply the middle three columns, and the axis points supply the two endpoints. Read sine under each angle in the picture. The matching cosine table runs in reverse order because exchanging the two legs exchanges horizontal and vertical shares. This memory device covers only these five reference angles.
| θ | 0° (0) | 180° (π) | 360° (2π) | ||
|---|---|---|---|---|---|
| point | (1, 0) | (0, 1) | (1, 0) | ||
| sin θ | 0 | 1 | 0 | 0 | |
| cos θ | 1 | 0 | 0 | 1 | |
| tan θ | 0 | undefined | 0 | undefined | 0 |
| cot θ | undefined | 0 | undefined | 0 | undefined |
| sec θ | 1 | undefined | undefined | 1 | |
| csc θ | undefined | 1 | undefined | undefined |
Part 1: The x-axis: y is zero
A hand pointing right or left has no upward travel. Among the axis points one unit from the origin, the point is (1, 0) or (−1, 0). The y-coordinate is zero, so sine and tangent are zero. Cotangent and cosecant put that zero on the bottom and have no value. Cosine and secant record whether the hand points right or left.
- Right: sin = 0, cos = 1, tan = 0, cot undefined, sec = 1, csc undefined.
- Left: sin = 0, cos = −1, tan = 0, cot undefined, sec = −1, csc undefined.
Worked example
Two turns, then read the point
Find sin 720°, cos 720° and csc 720°. In words, find the stopping point after two full turns.
Show the steps and the answer
- , so .Removing full turns preserves the terminal side.
- and .Sine uses y and cosine uses x.
- is undefined.Cosecant divides by y = 0.
- sin 720° = 0
- cos 720° = 1
- csc 720° = undefined
Part 2: The y-axis: x is zero
A hand pointing up or down has no sideways travel. The point is (0, 1) or (0, −1). The x-coordinate is zero, so cosine and cotangent are zero. Tangent and secant put that zero on the bottom and have no value. Sine and cosecant distinguish up from down.
- Up: sin = 1, cos = 0, tan undefined, cot = 0, sec undefined, csc = 1.
- Down: sin = −1, cos = 0, tan undefined, cot = 0, sec undefined, csc = −1.
Worked example
A turn and a quarter
Find cos 450°, cot 450° and sec 450°. In words, use the point where the ending ray lands.
Show the steps and the answer
- , so .One full turn does not change the ending direction.
- and .Both calculations give zero without a zero denominator.
- is undefined.No number multiplied by zero can equal one.
- cos 450° = 0
- cot 450° = 0
- sec 450° = undefined
Part 3: Undefined is different from zero
Sharing zero cookies among four people gives everyone zero cookies. Trying to share four cookies among zero people does not give a portion size. Fractions behave the same way: zero on top can be a real answer, but zero on the bottom never gives a defined quotient.
- = 0 when a ≠ 0.
- is undefined, including when a = 0.
- For , every number times 0 gives 0, so division cannot choose one unique answer.
Worked example
Check the location of zero
Evaluate , and . In words, decide whether each fraction names one definite number.
Show the steps and the answer
- .0 × 4 = 0, so zero is the quotient.
- is undefined.There is no number q with q × 0 = 4.
- is undefined too.Every q satisfies q × 0 = 0, so there is no unique quotient.
- = undefined
- = undefined
5 How
- If this is a quadrantal angle, add or subtract full turns until 0° ≤ θ < 360°; in radians use turns of 2π.
- Match its terminal side to (1, 0), (0, 1), (−1, 0) or (0, −1).
- Read sin θ = y and cos θ = x.
- Write tan = , cot = , sec = and csc = .
- Inspect every denominator first. A zero denominator gives undefined; otherwise do the division.
Find all six functions on an axis
- If this is a quadrantal angle, add or subtract full turns until 0° ≤ θ < 360°; in radians use turns of 2π.
- Match its terminal side to (1, 0), (0, 1), (−1, 0) or (0, −1).
- Read sin θ = y and cos θ = x.
- Write tan = , cot = , sec = and csc = .
- Inspect every denominator first. A zero denominator gives undefined; otherwise do the division.
6 Worked example
Worked example
Axis values after clockwise turns
Find all six functions at −540° and −450°. In words, remove complete turns, find the axis point, then read the six ratios.
Show the steps and the answer
- , so use , with .Adding full turns preserves the terminal side.
- ; ; .Substitute y, x and r in the coordinate definitions.
- is undefined; ; is undefined.Cotangent and cosecant divide by y = 0. Secant is .
- , so use , with .The terminal side points down after the full turns are removed.
- ; ; ; .Read the coordinates and substitute in the ratios.
- and are undefined.Their denominator x is 0.
- At −540°:
- sin = 0
- tan = 0
- cot = undefined
- sec = −1
- csc = undefined
- At −450°:
- cos = 0
- tan = undefined
- cot = 0
- sec = undefined
- csc = −1
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
A full-turn multiple
Find sine and cosine at 720°. In words, read the two coordinates after two turns.
Show the steps and the answer
- , so the point is (1, 0).Two full turns return to the starting point.
- and .Sine is y and cosine is x.
- sin 720° = 0
- cos 720° = 1
Rung 2 of 4
A negative axis angle
Find tan(−270°) and cot(−270°). In words, identify which fraction has a zero bottom.
Show the steps and the answer
- , so .A clockwise three-quarter turn ends where a counterclockwise quarter turn ends.
- is undefined; .Tangent divides by x; cotangent divides by y.
- tan(−270°) = undefined
- cot(−270°) = 0
Rung 3 of 4
All six after extra turns
Find all six functions at 630°. In words, remove a turn and use the bottom point.
Show the steps and the answer
- , so and .Coterminal angles share the terminal side.
- .Substitute the point into formulas with nonzero denominators.
- and are undefined.Their denominator x is zero.
- cos 630° = 0
- tan 630° = undefined
- cot 630° = 0
- sec 630° = undefined
- csc 630° = −1
Rung 4 of 4
Radians with a negative turn
Find all six functions at −. In words, remove full clockwise laps and locate the axis point.
Show the steps and the answer
- .4π adds two full turns and preserves the ending ray.
- Use : .With r = 1, the coordinate formulas give these four values.
- tan and sec are undefined.Both put x = 0 on the bottom.
- cos = 0
- tan = undefined
- cot = 0
- sec = undefined
- csc = −1
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the point before the functions. It prevents guessing which ratio has a zero denominator.
- Circle the denominator: zero below means no value; zero above a nonzero number means zero.
- Rebuild the axis table by walking right, up, left, down. Keep the general excluded-angle formulas on the cheat sheet.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Writing 0 when the answer is undefined, or the reverse. = 0 is a real value; has no value. Look at which coordinate sits on the bottom before you answer.
Keep in mind
- Zero on top is a real answer, but zero on the bottom is not: = 0, while is undefined.
- sin and cos never fail, because they divide by r, which is never 0: −810° + 3 × 360° = 270° ends at (0, −1), so sin(−810°) = −1 and cos(−810°) = 0.
- Undefined at an angle means that angle is not in the domain: 450° is outside the domain of tan and sec but inside the domain of csc and cot.
- The whole quadrantal table fits on a notebook-paper cheat sheet as one small plus sign with the points (1, 0), (0, 1), (−1, 0) and (0, −1), since every entry rebuilds from them.
Memory hook
Draw a plus sign with dots at (1, 0), (0, 1), (−1, 0), (0, −1): cos is x, sin is y, and a zero bottom means undefined.
Flash cards
Say the answer out loud, then flip.
What is a quadrantal angle?
What does undefined mean for ?
Where are tan and sec undefined? Where are cot and csc undefined?
- tan and sec: where x = 0 (the y-axis), 90° + n·180°
- cot and csc: where y = 0 (the x-axis), n·180°
Find sin, cos and tan of 900°.
- 900° − 720° = 180°, the point (−1, 0)
- sin 900° = 0
Is −630° in the domain of tan?
cot 630° = ?
Lesson 8 of 10
Signs by quadrant: find the quadrant first
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Picture a city map split into four neighborhoods by an east to west street and a north to south street. A point's x-coordinate tells right or left; its y-coordinate tells up or down. Those directions decide the signs of the trig values because r, the distance from the center, is positive. Each neighborhood is a Quadrant. Upper right is I, upper left II, lower left III and lower right IV. Sine follows up or down. Cosine follows right or left. Tangent is positive when both directions have matching signs. Before finding a missing value, locate the neighborhood. The square root tells its size; the neighborhood tells whether to place a minus sign in front.
Explain it like I am five
Picture a city map cut by two streets into four neighborhoods, the quadrants, numbered I to IV counterclockwise from the upper right. A point's x says right (+) or left (−), and its y says up (+) or down (−). Since r is always positive, sin θ = takes the sign of y, cos θ = the sign of x, and tan θ = is positive when x and y match.
Try sin θ = − with cos θ < 0. Clue one, sine negative: down, so III or IV. Clue two, cosine negative: left, so II or III. The overlap is III. Size next: θ = 1 − = , and = . Sign last: III is on the left, so cos θ = −, and tan θ = (−) ÷ (−) = , positive, as III requires.
A root sign, as in = 3, means the nonnegative (zero or positive) principal square root, so it gives the size. The equation θ = allows or −, and the quadrant picks one.
2 Picture it
Reminder
Reminder: Squares of negatives, Subtracting from one, Principal square root, Rationalizing
- Squares of negatives. (− = because a negative times a negative is positive.
- Subtracting from one. 1 − = − = . Match the denominators first.
- Principal square root. = , while solving = gives z = ±.
- Rationalizing. × = ; the multiplying fraction equals 1.
3 Why
sin θ = has the sign of y because r > 0. cos θ = has the sign of x. tan θ = is positive when x and y have matching signs and negative when they differ. A reciprocal of a nonzero number keeps its sign, so csc, sec and cot copy their partners inside a quadrant. Squaring loses signs: both and − square to . An identity gives the magnitude of a missing sine or cosine; the quadrant restores its sign.
4 The rule
Inside Quadrants I, II, III, IV, the positive functions are respectively: all six; sin and csc; tan and cot; cos and sec.
Every remaining function is negative. gives the missing magnitude. The quadrant chooses the sign of or in front of its nonnegative square root.
The same idea, five ways
Find the quadrant first. A sign clue is a direction clue.
The signs of sine and cosine reveal the signs of y and x; tangent compares those signs.
- sin θ > 0 means y > 0
- cos θ < 0 means x < 0
- tan θ > 0 means x and y have the same sign
- cos θ = ±, with the quadrant selecting the sign
Use two directions, left and up, to locate one neighborhood on a map.
The same idea, other ways
Sine says above or below, cosine says right or left. In Quadrant II, left means x < 0 and up means y > 0. So sine and cosecant are positive, while cosine, secant, tangent and cotangent are negative.
For a point in Quadrant III, take x = −2 and y = −5. Sine and cosine are negative because r is positive. Tangent is = , positive because both signs match.
All Students Take Calculus lists the positive families in counterclockwise order: All in I, Sine in II, Tangent in III, Cosine in IV. Include each named function's reciprocal partner. Use this for signs inside quadrants; the axes need their own point calculation.
| Quadrant | x | y | sin θ and csc θ | cos θ and sec θ | tan θ and cot θ |
|---|---|---|---|---|---|
| I | + | + | + | + | + |
| II | + | + | |||
| III | + | ||||
| IV | + | + |
Part 1: Combine sign clues
One clue often leaves two neighborhoods on the map. A second clue narrows the search. List both sets and keep their overlap. A positive cosecant means a positive sine because a nonzero number and its reciprocal share a sign. A negative tangent means the two coordinates have opposite signs.
- sin and csc positive: I or II. Negative: III or IV.
- cos and sec positive: I or IV. Negative: II or III.
- tan and cot positive: I or III. Negative: II or IV.
- All Students Take Calculus names the positive families; their reciprocal partners share those signs.
Worked example
Two directions choose one quadrant
cos β < 0 and csc β > 0. Find the quadrant. In words, find the region where both clues can hold.
Show the steps and the answer
- gives II or III.Cosine has the sign of x, so the point is left of the y-axis.
- means , giving I or II.A nonzero number and its reciprocal share a sign.
- Only II is in both lists.The point must be both left and up.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Draw two short lists and circle the common quadrant.
Part 2: Recover the missing magnitude and sign
Knowing one coordinate of a point whose distance from the origin is 1 is like knowing one leg of a triangle whose longest side is 1. The squares must add to 1, so subtract the known square to find the missing square. Take a root to find the size. Then use the quadrant to decide the sign. These are two separate decisions.
- θ = 1 − θ and θ = 1 − θ.
- is the nonnegative principal root for a ≥ 0.
- A positive root describes size; the quadrant supplies the sign of sine or cosine.
Worked example
Recover sine in Quadrant III
cos β = − and β is in III. Find sin β and tan β. In words, recover the other coordinate and then its ratio to cosine.
Show the steps and the answer
- .The Pythagorean identity isolates the square of the missing sine.
- .The root gives size , and Quadrant III requires a negative sine.
- .The equal denominators cancel, and matching negative signs give a positive ratio.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write size first, then sign, to see where each decision came from.
5 How
- For each clue, list every quadrant where it is true. A zero value points to an axis instead.
- Keep only the quadrants shared by every clue. If more than one remains, report that the information does not determine one quadrant.
- Use θ + θ = 1 to isolate the square of the missing partner.
- Take the nonnegative square root for its magnitude, then attach the sign required by the quadrant.
- Compute tan = , cot = , sec = and csc = , checking denominators.
- Check the squared identity and every sign against the clues.
Find a quadrant and recover the missing functions
- For each clue, list every quadrant where it is true. A zero value points to an axis instead.
- Keep only the quadrants shared by every clue. If more than one remains, report that the information does not determine one quadrant.
- Use θ + θ = 1 to isolate the square of the missing partner.
- Take the nonnegative square root for its magnitude, then attach the sign required by the quadrant.
- Compute tan = , cot = , sec = and csc = , checking denominators.
- Check the squared identity and every sign against the clues.
6 Worked example
Worked example
Use two sign clues before taking a root
sin θ = and tan θ < 0. Find the other five functions. In words, decide where the terminal side is, then recover the missing ratios.
Show the steps and the answer
- allows I or II; allows II or IV. Their common quadrant is II.Only Quadrant II satisfies both sign clues, so cosine must be negative.
- .This isolates the square of the unknown cosine.
- . = 3; choose the negative root for Quadrant II.
- .The 7s cancel; multiply top and bottom by .
- ; ; .Take reciprocals of nonzero tangent, cosine and sine.
- Quadrant II
- cot θ = −
- sec θ = −
- csc θ =
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Signs without arithmetic
sin α < 0 and cos α > 0. Find the quadrant. In words, locate the point below and to the right.
Show the steps and the answer
- permits III or IV; permits I or IV.Sine follows y, and cosine follows x.
- Only IV is in both lists.Both clues must be true together.
Rung 2 of 4
A missing partner with whole-number roots
sin β = − and tan β > 0. Find cos β and tan β. In words, choose the quadrant and recover cosine.
Show the steps and the answer
- Negative sine allows III or IV; positive tangent allows I or III. Choose III.III is their only overlap, so cosine is negative.
- , so .The squared identity gives magnitude , and III gives the sign.
- .Equal bottoms cancel; two negative signs give a positive quotient.
- Quadrant III
Rung 3 of 4
All six with a radical
sin θ = and tan θ < 0. Find the other five functions. In words, use the signs before recovering a radical cosine.
Show the steps and the answer
- Positive sine allows I or II; negative tangent allows II or IV. Choose II.II is their common quadrant.
- , so . = 3, and cosine is negative in II.
- and .Divide sine by cosine, rationalize tangent, and reverse that nonzero ratio.
- and .Take the reciprocals of cosine and sine, rationalizing the root denominator.
- cot θ = −
- sec θ = −
- csc θ =
Rung 4 of 4
Start from tangent
tan γ = 3 and cos γ < 0. Find the other five functions. In words, choose a signed point with the required y-to-x ratio.
Show the steps and the answer
- Positive tangent allows I or III; negative cosine allows II or III. Choose III.Both clues hold in III, where x and y are negative.
- Use , so . Then .A point on that ray can have any positive scale; these coordinates give the required ratio.
- and .Use and , then rationalize.
- .Use , and .
- cot γ =
- sec γ = −
- csc γ = −
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know All Students Take Calculus for the signs, then rebuild it from x and y when needed.
- Write the chosen quadrant before touching a square root. It controls the sign of the missing value.
- In Quadrant III, tangent and cotangent are positive because both coordinate signs match; sine, cosine, cosecant and secant remain negative.
- Do not use the quadrant sign chart for axis points. An axis value can be zero or undefined.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Taking the positive square root out of habit. The principal square root, written , is nonnegative, including = 0. A missing sine or cosine can still be negative: choose its sign from the quadrant. When a sign clue leaves two possible quadrants, keep both instead of guessing.
Keep in mind
- An angle's sign and its sine's sign are different things: 200° is a positive angle, yet sin 200° < 0 because its point sits below the x-axis.
- The root sign gives only the nonnegative root, so = , while = has two answers, x = or x = −.
- Each reciprocal copies its partner's sign: cos θ = − gives sec θ = −.
- With two clues, list each clue's two quadrants and keep the overlap: sec θ > 0 allows I or IV, csc θ < 0 allows III or IV, so θ is in IV.
Memory hook
All Students Take Calculus: counterclockwise from Quadrant I, All six are positive, then Sine (and csc), then Tangent (and cot), then Cosine (and sec).
Flash cards
Say the answer out loud, then flip.
What is a quadrant?
What is the principal square root?
In All Students Take Calculus, which functions are positive in Quadrant III?
cot θ > 0 and sin θ > 0. Which quadrant is θ in?
200° is past 180°. Is 200° a negative angle?
Lesson 9 of 10
Definition 3: the unit circle
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
Picture a round running track with radius 1 and the starting mark at (1, 0). This is the Unit circle. A real number t gives signed travel around it: walk a distance |t|, counterclockwise for t > 0 and clockwise for t < 0. The bars |t| mean the size without its sign; for t = −3 the distance is 3. At t = 0 you stay at the start. Your stopping place is the Terminal point P(t). If it is (x, y), cosine reads x and sine reads y. These trig functions with real-number inputs are also called Circular functions. A half lap changes both coordinates' signs; reversing the travel changes only the up or down coordinate.
Explain it like I am five
Picture a running track of radius 1 around the origin, the unit circle, with its start line at (1, 0). A number t says how far to walk: counterclockwise when t is positive, clockwise when t is negative. Where you stop is the terminal point P(t), read "P of t".
With r = 1, the rules become sin t = = y and cos t = = x. So the stopping point's address is (cos t, sin t), cosine first like x. A question such as "P is on the unit circle, find cos t and sin t" asks you to read that address.
Say P(t) = (−, ). It is on the track, since + = + = 1. Read cos t = − and sin t = , so tan t = = −. Any circle around the origin shrinks to this one: the map point (−15, 8), 17 from home, divided by 17 lands here on the same ray, which is what sin = and cos = do.
2 Picture it
Reminder
Reminder: Absolute value, Circle equation, Dividing fractions, Radians
- Absolute value. |t| is the nonnegative size: |−| = . The original minus sign still sets clockwise travel.
- Circle equation. A radius-1 circle centered at the origin satisfies + = 1: + = 1.
- Dividing fractions. ÷ = , since their equal denominators cancel.
- Radians. π is a half turn and 2π is a full turn. In a diagram, π radians is drawn as 180°.
3 Why
The distance r from the origin is 1, so the point definition becomes sin t = = y and cos t = = x. Radian magnitude is arc length divided by radius; on this track, a distance |t| turns you through |t| radians. Direction supplies its sign. Thus signed travel t matches the angle t radians. A diameter, a straight line through the center from one circle point to another, connects opposite points, so a half turn reverses both coordinates. Reversing travel reflects across the x-axis, keeping x and reversing y. A full turn returns to the same point.
4 The rule
and .
and require ; and require .; ; , where n is any integer.
The same idea, five ways
Cosine is the first coordinate; sine is the second. Signed travel includes both distance and direction.
A real number t names the point reached by walking |t| along the unit circle in the direction given by its sign.
- P(t) = (cos t, sin t)
- P(t + 2nπ) = P(t), n any integer
Walk around a track, then report how far right or left and up or down you stopped.
The same idea, other ways
The circle starts at (1, 0). Positive t sends you counterclockwise; negative t reverses that direction. If t = −π, walk distance π clockwise. You reach (−1, 0), the same point reached by a positive half turn.
A point (12, 5) is 13 from the origin because + = 169 = . Divide both coordinates and the radius by 13. The new point (, ) has radius 1. Sine becomes its y-coordinate because y divided by 1 is y.
Remember the order P(t) = (cos t, sin t). Cosine is horizontal and comes first, as x does. Sine is vertical and comes second, as y does. At P(t) = (−, −), write cos t = − and sin t = − before any division.
A half turn moves across the center: (x, y) becomes (−x, −y). A full turn returns home: (x, y) remains (x, y). Reversing the signed travel reflects across the x-axis: (x, y) becomes (x, −y). These work even when t already includes several laps.
Half turn: (x, y) becomes (−x, −y)
Full turn: (x, y) becomes (x, y)
Reverse travel: (x, y) becomes (x, −y)
| Right triangle | Point P(x, y), distance r | Unit circle point (x, y) | |
|---|---|---|---|
| Works for | acute angles | any angle | any real number t |
| sin | y | ||
| cos | x | ||
| tan | |||
| csc, sec, cot | , , |
Part 1: Read the coordinates of a unit point
On a radius-1 track, the horizontal coordinate already is cosine and the vertical coordinate already is sine. There is no extra division for these two because their usual denominator is 1. Check that a given point really belongs on that track, then build the remaining ratios from its coordinates.
- P(t) = (x, y) gives cos t = x and sin t = y only on the unit circle.
- Check + = 1.
- tan = , cot = , sec = and csc = whenever the denominator is nonzero.
Worked example
Read a new unit point
P(u) = (, ). Find sin u, cos u and tan u. In words, verify the point and read its coordinates.
Show the steps and the answer
- .The sum confirms radius 1.
- and .On the unit circle sine is y and cosine is x.
- .The common denominators cancel.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write cos = x first, then sin = y, to preserve the coordinate order.
Part 2: A half turn: change both coordinate signs
Walk half a lap forward or backward from any stopping point. You reach the point across the center of the track. Left becomes right and up becomes down, so both coordinates change sign. Adding π or subtracting π gives that same opposite point because those two trips differ by one full lap.
- A half turn negates sine, cosine, secant and cosecant wherever defined. A zero value remains zero.
- Tangent and cotangent keep their values when defined because both coordinates reverse signs.
Worked example
Move across the center
P(u) = (, ). Find P(u + π), P(u − π) and tan(u + π). In words, walk half a lap and form the new ratio.
Show the steps and the answer
- .A half turn reverses both coordinates.
- too.Forward and backward half turns reach the same opposite point.
- .Both signs reverse and cancel in the quotient.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Half turn means both signs. Check that the point changed to the opposite quadrant.
Part 3: Full turns: keep both coordinates
A complete lap returns you to your starting spot. Two laps, or a clockwise lap, do the same. The distance and direction of the trip can change while the stopping point remains fixed. Adding any whole-number multiple of 2π therefore keeps both coordinates and every defined trig value.
- P(t + 2nπ) = P(t) for every integer n.
- A full turn is 2π radians = 360°.
- The values and undefined locations repeat after full turns; tangent also repeats after half turns.
Worked example
One extra lap after a special angle
Find P() and sin . In words, remove a full turn and read the remaining 60° point.
Show the steps and the answer
- .Subtracting one full turn preserves the stopping point.
- .The 60° special-angle values give cosine first and sine second.
- is the same point, so .A full lap keeps both coordinates.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Remove complete laps before working with a large input.
Part 4: Reverse the signed travel: reflect across the x-axis
Start again at the rightmost point and reverse your entire trip. A counterclockwise trip becomes clockwise, or a clockwise trip becomes counterclockwise. The two stopping points are mirror images above and below the horizontal axis. Their horizontal coordinate stays the same, and their vertical coordinate changes sign. This describes P(−t), even when t includes several laps.
- cos(−t) = cos t and sin(−t) = −sin t.
- Where defined, sec keeps its value, while tan, cot and csc change signs.
Worked example
Reverse a trip to the upper left
P(v) = (−, ). Find P(−v), cos(−v) and sin(−v). In words, reverse the signed walk and read its mirror point.
Show the steps and the answer
- .Reflection across the x-axis leaves x fixed and reverses y.
- and .Cosine reads the unchanged horizontal coordinate; sine reads the reversed vertical one.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The minus inside P(−t) reverses travel; it is not a command to negate both coordinates.
5 How
- For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
- Read x and y from the Terminal point P(t), and check + = 1 if a point is supplied.
- Write cos t = x and sin t = y.
- Use tan = , cot = , sec = and csc = , checking each denominator.
- For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
- For several moves, apply them one at a time and check the resulting quadrant.
Read a unit-circle point and move it
- For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
- Read x and y from the Terminal point P(t), and check + = 1 if a point is supplied.
- Write cos t = x and sin t = y.
- Use tan = , cot = , sec = and csc = , checking each denominator.
- For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
- For several moves, apply them one at a time and check the resulting quadrant.
6 Worked example
Worked example
Clockwise travel to t = −: terminal point by symmetry and the six functions
A point starts at (1, 0) on the unit circle + = 1 and travels clockwise a distance of , so it marks the real number t = −. You may use P() = (, ). Describe where the travel ends. Then find the terminal point P(t) by applying the symmetry rules one move at a time, name its quadrant and confirm that it lies on the unit circle. Finally, find the exact values of sin t, cos t, tan t, cot t, sec t and csc t, rationalizing every denominator.
Show the steps and the answer
- Locate the end of the travel. Split the distance: . Going clockwise from (1, 0), the is one full turn back to (1, 0). The is a half turn to . The last carries the point on from toward (0, 1), so P(t) is in Quadrant II.t is negative, so the point travels clockwise a distance |t| = . Clockwise motion passes (1, 0), (0, −1), (−1, 0) and (0, 1) in that order, so a point just past (−1, 0) is in Quadrant II.
- Write t as moves applied to : .− − − = −. Each move (change the sign, subtract π, subtract 2π) has a known effect on the coordinates of P().
- Move 1: , in Quadrant IV.P(−t) = (x, −y): changing the sign of t flips only the y-coordinate of P() = (, ).
- Move 2: , in Quadrant II.P(t − π) = (−x, −y): subtracting π is a half turn, which flips both signs of (, −).
- Move 3: , still in Quadrant II. So .P(t + 2nπ) = (x, y) with n = −1: a full turn keeps both coordinates. Quadrant II agrees with the travel in the first step.
- Check the point: .Every terminal point lies on + = 1. Sign flips do not change or , so this also confirms the supplied point P().
- Read and . Write and .The unit-circle definition is P(t) = (cos t, sin t). Cosine is the x-coordinate and sine is the y-coordinate.
- Check the denominators: and .tan t and sec t divide by x, and cot t and csc t divide by y. Both are nonzero, so all four functions are defined here.
- , and .Dividing by a fraction is the same as multiplying by its reciprocal. Multiplying the top and bottom of − by removes the root from the denominator.
- , and .The reciprocal of − is −, which is rationalized by multiplying top and bottom by . The reciprocal of is 2.
Work to write
- = 2π + π + clockwise from (1, 0), ending in Quadrant II
- P(−) = (−, ), Quadrant II
- tan t = −, cot t = −
- sec t = −, csc t = 2
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
The starting point after laps
Find sin 4π and cos 4π. In words, read the point after two full counterclockwise laps.
Show the steps and the answer
- , so .Two full laps return to the rightmost starting point.
- and .Sine is y and cosine is x.
- sin 4π = 0
- cos 4π = 1
Rung 2 of 4
Six values from a new point
P(u) = (, ). Find all six functions. In words, check the unit point, read its coordinates and form four ratios.
Show the steps and the answer
- .The squared coordinates confirm radius 1.
- and .Read y and x respectively.
- .The shared 17s cancel in quotients; dividing 1 by a nonzero fraction flips it.
- cot u =
- sec u =
- csc u =
Rung 3 of 4
Half turn and reverse travel
P(u) = (, ). Find P(u − π), P(−u) and their tangents. In words, distinguish the opposite point from the mirror point.
Show the steps and the answer
Original: (, )
Half turn: (, )
Reverse: (, )
- .A backward half turn reverses both coordinates.
- .Reversing the original signed walk reflects only y.
- ; .The half-turn ratio reverses both signs; the reflection ratio reverses only its numerator.
Rung 4 of 4
Combine reflection, half turn and full turn
P(v) = (−, ). Find P(−v + 3π) and all six functions there. In words, reverse the walk, then add one half turn and one full turn.
Show the steps and the answer
- First .Reflection across the x-axis keeps x and reverses y.
- Write .This separates a half turn, which changes signs, from a full turn, which keeps them.
- , and adding keeps that point.The half turn reverses both coordinates; the final full lap changes neither.
- .Read y and x from the final point.
- .Form the quotients and reciprocals using the nonzero final coordinates.
- cot =
- sec =
- csc =
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know P(t) = (cos t, sin t) cold: c before s, x before y is the memory cue.
- Sketch the starting point on the right before a signed walk. A negative input reverses travel.
- Rebuild half-turn and reflection rules from the picture. Put the coordinate formulas on the cheat sheet.
- A point may have infinitely many real-number inputs t because full laps return to it. You need its coordinates, not one unique t.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.
Keep in mind
- The first number is always cos t: P(t) = (0.28, 0.96) means cos t = 0.28 and sin t = 0.96.
- A point is on the unit circle only if + = 1: (0.5, 0.5) is not, since 0.25 + 0.25 = 0.5.
- Half a lap flips both signs and walking backward flips only y: if P(t) = (0.28, 0.96), then P(t + π) = (−0.28, −0.96) and P(−t) = (0.28, −0.96).
- tan and sec need x ≠ 0, and cot and csc need y ≠ 0: at P(t) = (0, 1), tan t = is undefined.
Memory hook
The point is (cos t, sin t): alphabetical, c before s as x before y. Positive t walks counterclockwise, negative t walks clockwise.
Flash cards
Say the answer out loud, then flip.
What is the unit circle?
What is the terminal point P(t)?
What equation does every point (x, y) on the unit circle satisfy?
P(t) = (−, −) is on the unit circle. Find cos t, sin t and tan t.
P(t) = (−, ). Find P(t + π) and P(−t).
- P(t + π) = (, −), since half a lap flips both signs
- P(−t) = (−, −), since walking backward flips only y
P(t) = (0.96, 0.28). Is sin t = 0.96?
Lesson 10 of 10
Calculator values: DEG or RAD mode
Open this lessonLeans on 0Comes back in 1
Leans on
No lesson links recorded.
1 In plain words
A kitchen scale must know whether you mean grams or ounces. A calculator likewise needs the angle unit before it can give a trig value. DEG and RAD mode choose degrees or radians. A degree sign, or the word degrees, tells you to use DEG. In this course an angle with no unit written means radians, so use RAD. The same typed number can give different answers in the two modes. Many scientific calculators have sine, cosine and tangent keys. If yours lacks a secant, cosecant or cotangent key, build that function from sine and cosine. Keep all stored digits while calculating. Round the final result to the requested number of decimal places.
Explain it like I am five
A kitchen scale must know grams or ounces before its number means anything, and a calculator must know the angle unit. DEG mode reads 62 as 62 degrees. RAD mode reads it as 62 radians, where one radian, the angle whose arc is one radius long, is about 57.3°. So 62 radians is a huge turn, about 3552°.
Find sin 62° to four decimal places. The degree sign means DEG mode; with no sign, this course means radians and RAD mode. Press SIN, 62, close the parenthesis, ENTER: 0.8829475929. The fifth decimal is 4, below 5, so it rounds to 0.8829. The same keys in RAD mode show −0.7391806966, the sine of a different turn.
Many calculators have no csc, sec or cot key, so build them as flips: csc 62° = 1 ÷ sin 62° ≈ 1.1325700507, which rounds to 1.1326. The SIN⁻¹ key above SIN is not cosecant. It runs sine backward: you give it a number and it returns an angle. Round only once, at the end.
2 Picture it
DEG keys: sin 30 gives 0.5
RAD keys: sin 30 gives about −0.98803
sec θ =
cot θ =
Reminder
Reminder: Radians to degrees, Reciprocal, Decimal places, Undefined fractions
- Radians to degrees. 10 × ≈ 572.957795…°, so 10 radians rounds to 572.96°, not 572.97°.
- Reciprocal. 1 ÷ = ; a reciprocal requires a nonzero input.
- Decimal places. In 0.7880107536, the fourth decimal is 0 and the fifth is 1, so four-place rounding gives 0.7880.
- Undefined fractions. is undefined. A large approximate calculator number does not create a defined exact quotient.
3 Why
An angle of 10 radians is 10 × ≈ 572.96°, a different turn from 10°. The calculator uses its mode to interpret the number, so the setting changes the angle it evaluates. Secant is 1 divided by cosine and cosecant is 1 divided by sine. Cotangent is cosine divided by sine, which also works where tangent is undefined but sine is nonzero. Rounding an intermediate value changes the number before later arithmetic, so its error can grow. Retain the stored value and round once, at the end.
4 The rule
Use DEG for degrees and RAD for radians.
Here an angle with no unit means radians. requires ; and require . Round only the final value, retaining requested trailing zeros.
The same idea, five ways
Set the angle unit, build a missing function key, then round at the end.
A calculator approximation is useful only when its angle mode matches the given unit.
- 52°: DEG; 52: RAD
- sec θ =
- csc θ =
- cot θ =
- Four decimal places: 0.7880107536… ≈ 0.7880
Set a kitchen scale's units before reading a weight, then keep precision until the recipe is complete.
DEG keys: sin 30 gives 0.5
RAD keys: sin 30 gives about −0.98803
sec θ =
cot θ =
The same idea, other ways
Typing 24 with the scale set to ounces means something different from 24 grams. Typing 24 into a trig key in DEG mode similarly means a different angle from 24 in RAD mode. The written angle unit determines which setting is right.
sin 24°: DEG, about 0.4067
sin 24: RAD, about −0.9056
30 radians is 30 × ≈ 1718.87°, about 4.8 full turns. It is not the 30° slice. That is why the table's keys sin 30 give 0.5 in DEG but about −0.98803 in RAD. Except for the exact value 0.5, its listed outputs are rounded to five decimal places.
You can build secant from cosine, cosecant from sine, and cotangent from both. Evaluate the needed ingredient without rounding, then do the division. For sec 67°, use 1 ÷ cos 67°; rounding the cosine to 0.39 first changes the final four-place answer.
cos 67° ≈ 0.3907311285
1 ÷ cos 67° ≈ 2.5593046652
1 ÷ 0.39 ≈ 2.5641025641
Keep stored precision.
| Keys typed | DEG mode | RAD mode |
|---|---|---|
| sin 30 | 0.5 | |
| sin 15 | 0.25882 | 0.65029 |
| cos 30 | 0.86603 | 0.15425 |
Part 1: Choose degrees or radians
Before weighing something, set the kitchen scale's unit. Before evaluating a trig function, set the calculator's angle unit. Degrees may appear as ° or as the word degrees. Radians may be written explicitly, but their unit is often omitted. In this course, a bare real number is radians even when it looks like a familiar degree angle.
- A degree sign or stated degree unit means DEG.
- Radian inputs, including a bare number or a fraction containing π with no degree unit, mean RAD.
- The table's decimal outputs are rounded to five places except the exact 0.5.
24° means DEG
24 means RAD
means RAD
Worked example
Same digits, different angles
Find sin 24° and sin 24 to four decimal places. In words, evaluate one degree angle and one radian angle.
Show the steps and the answer
DEG: sin 24° ≈ 0.4067
RAD: sin 24 ≈ −0.9056
- For , set DEG: the stored value is about 0.4067366431.The degree sign identifies the angle unit.
- Round to 0.4067.The fifth decimal is 3, so the fourth stays 7.
- For sin 24, set RAD: the stored value is about .The missing unit means radians here.
- Round the magnitude to 0.9056, then restore the minus sign.The fifth decimal is 7, which rounds the fourth from 5 to 6.
- sin 24° ≈ 0.4067
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Recheck mode whenever the next problem switches units.
Part 2: Build a missing secant, cosecant or cotangent key
If a machine has no button for the exact drink you want, combine the ingredients you can get. Many calculators supply sine and cosine, and those are enough to build the remaining functions. Divide 1 by cosine for secant, 1 by sine for cosecant, or cosine by sine for cotangent. Check the denominator before dividing.
- sec θ = when cos θ ≠ 0.
- csc θ = and cot θ = when sin θ ≠ 0.
- cot θ = may be used only when tangent exists and is nonzero.
sec: 1 ÷ cosine
csc: 1 ÷ sine
cot: cosine ÷ sine
Worked example
Build cosecant and an axis cotangent
Find csc 38° to four decimals and cot 450° exactly. In words, use sine and cosine instead of relying on special keys.
Show the steps and the answer
- Set DEG and evaluate , keeping its stored digits.Both inputs are degree angles.
- , so 1.6243.Sine is nonzero, so the reciprocal exists; the fifth decimal is 6.
- ends at (0, 1), so .Cotangent's coordinate formula works here even though tangent is undefined.
- csc 38° ≈ 1.6243
- cot 450° = 0
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- cos ÷ sin is the safest cotangent formula across all its defined inputs.
Part 3: Round after the final operation
A rounded ingredient can change the recipe's result. Keep the calculator's stored digits while taking a reciprocal or multiplying values. After the last operation, count the requested decimal places and inspect one more digit. For a negative answer, round its positive size by the same rule, then restore the minus sign. Keep trailing zeros when the question requests that many places.
- For p decimal places, inspect decimal digit p + 1.
- Digits 0 through 4 leave the last retained digit unchanged; digits 5 through 9 round the magnitude up, carrying if needed.
- Keep requested trailing zeros: 0.7880 shows four decimal places.
0.7880107536…
Keep four places: 0.7880
Next digit: 1, so keep the 0
Final answer: 0.7880
Worked example
Delay the reciprocal rounding
Find sec 73° to four decimals. In words, take a reciprocal before rounding it.
Show the steps and the answer
sec 73° ≈ 3.4203036198
Four places: 3.4203
Fifth digit: 0, so do not increase
- Set DEG and keep the full stored value of .The degree sign chooses DEG, and premature rounding changes the divisor.
- Compute .Secant is the reciprocal of the nonzero cosine.
- Keep 3.4203; the fifth decimal is 0, so the fourth stays 3.Four-place rounding uses the next digit only after the last calculation.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use the calculator's stored answer rather than retyping a rounded display.
5 How
- Read the angle unit from the degree sign or words. If none is written, this course means radians.
- Set DEG or RAD before entering the angle, and use parentheses around an entire fraction, negative angle or multiple of π.
- Use the function key if available. Otherwise compute sec = 1 ÷ cos, csc = 1 ÷ sin, cot = cos ÷ sin, all with the same angle and mode.
- Check whether an exact axis input makes the needed denominator zero. If it does, write undefined rather than trusting a very large calculator display.
- Keep the unrounded value in calculator memory while doing reciprocals or other arithmetic.
- For p decimal places, inspect digit p + 1: 0 through 4 leaves digit p unchanged; 5 through 9 rounds the magnitude up. Restore the sign and keep exactly p places.
Compute and round a trig value
- Read the angle unit from the degree sign or words. If none is written, this course means radians.
- Set DEG or RAD before entering the angle, and use parentheses around an entire fraction, negative angle or multiple of π.
- Use the function key if available. Otherwise compute sec = 1 ÷ cos, csc = 1 ÷ sin, cot = cos ÷ sin, all with the same angle and mode.
- Check whether an exact axis input makes the needed denominator zero. If it does, write undefined rather than trusting a very large calculator display.
- Keep the unrounded value in calculator memory while doing reciprocals or other arithmetic.
- For p decimal places, inspect digit p + 1: 0 through 4 leaves digit p unchanged; 5 through 9 rounds the magnitude up. Restore the sign and keep exactly p places.
6 Worked example
Worked example
Five original calculator approximations
Round to four decimal places: (a) sin 52°, (b) sin 52, (c) cos(−), (d) tan 1.3, (e) sec 67°. In words, identify the angle unit before computing each decimal.
Show the steps and the answer
52°: DEG
52: RAD
sec 67° = 1 ÷ cos 67°
Round the final value.
52°: DEG
52: RAD
sec 67° = 1 ÷ cos 67°
Round the final value.
- (a) DEG mode: , so 0.7880.The degree sign selects DEG; the fifth decimal is 1.
- (b) RAD mode: , so 0.9866.No unit means radians; the fifth decimal is 2.
- (c) RAD mode: , so .Enter the entire angle in parentheses; the fifth decimal is 2.
- (d) RAD mode: , so 3.6021.The fifth decimal is 0; preserve four digits after the decimal point.
- (e) DEG mode: , so 2.5593.If there is no secant key, use 1 ÷ cos 67°. Keep cosine's stored precision until the final rounding.
- (a) 0.7880
- (b) 0.9866
- (d) 3.6021
- (e) 2.5593
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
One degree input
Find sin 18° to four decimal places. In words, choose the degree mode and round one output.
Show the steps and the answer
- Set DEG and evaluate .The degree sign fixes the unit.
- Keep four places, 0.3090; the fifth decimal is 1.A fifth digit below 5 leaves the fourth unchanged.
Rung 2 of 4
A negative radian angle with π
Find cos(−) to four decimals. In words, enter the whole negative radian angle and round its cosine.
Show the steps and the answer
- Set RAD and enter , with the entire angle inside parentheses.The input is radians and the minus sign belongs to the whole angle.
- The result is approximately , which rounds to .The fifth decimal is 2; retain four places and the minus sign.
Rung 3 of 4
Cotangent without a cotangent key
Find cot 1.1 to four decimals. In words, divide cosine by sine of the same radian input.
Show the steps and the answer
- Set RAD, then evaluate cos 1.1 and sin 1.1 without rounding them.No angle unit means radians; both functions must use the same input and mode.
- Divide cos 1.1 by sin 1.1 to obtain approximately 0.5089681052.Cotangent equals cosine divided by sine, and sine is nonzero here.
- Round to 0.5090.The fifth decimal is 6, increasing 0.5089 to 0.5090 with a carry.
Rung 4 of 4
Two modes and a reciprocal
Find sin 52°, sin 52 and sec 67° to four decimals. In words, switch modes deliberately and form the final reciprocal before rounding.
Show the steps and the answer
52°: DEG becomes 0.7880
52: RAD becomes 0.9866
67°: DEG, reciprocal becomes 2.5593
- Set DEG: , so write 0.7880.The degree sign chooses DEG; the fifth decimal is 1.
- Switch to RAD: , so write 0.9866.The bare input is radians; the fifth decimal is 2.
- Switch to DEG and compute using the stored cosine: approximately 2.5593046652.Secant uses the reciprocal of cosine and the angle is degrees.
- Round to 2.5593.The fifth decimal is 0, so the fourth stays 3.
- sin 52° ≈ 0.7880
- sin 52 ≈ 0.9866
- sec 67° ≈ 2.5593
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- For each question write DEG or RAD before entering a number.
- Parenthesize the entire angle: cos(−7π ÷ 6) keeps the negative and division together.
- Sine and cosine must lie between −1 and 1. A defined secant or cosecant has magnitude at least 1.
- 0.7880 has four decimal places. Its trailing zero records the requested precision.
- Some devices return tiny errors for exact axis values, such as cosine near zero instead of zero. Use the axis point to decide zero and undefined values.
- Read reference tables by columns: keep the input label and its output in the same vertical column.
7 The trap
Leaving the calculator in the wrong mode. Before any calculator question, look for a degree sign and set the mode. Quick test: sin 30 should show 0.5 in DEG mode.
Keep in mind
- Test the mode first: sin 90 shows 1 in DEG mode but about 0.8940 in RAD mode.
- SIN⁻¹ is not csc: SIN⁻¹ takes a number such as 0.5 and returns an angle, 30° in DEG mode, while csc 30° = 1 ÷ 0.5 = 2.
- Round once, at the end: rounding sin 62° to 0.88 first gives 1 ÷ 0.88 ≈ 1.1364 instead of the correct 1.1326.
- At an exact axis angle, trust the axis point, not the screen: tan(−) in RAD mode can show a huge number, but − points straight down, where x = 0, so it is undefined.
Memory hook
Degree sign? DEG. No sign? RAD. No csc, sec or cot key? Flip: csc = 1 ÷ sin, sec = 1 ÷ cos, cot = cos ÷ sin.
Flash cards
Say the answer out loud, then flip.