Trigonometric functions: crash course
about 35 min to listen10 lessons17 questions to tryUnit 2 of 11
Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.
Starts here no skill from another unit needed first
1 Right triangles and the names of their sides
The rule
For an acute angle of a right triangle: hyp faces the corner; opp is the leg facing ; adj is the leg touching .
The hypotenuse is excluded when naming adj.
The two acute angles add to .
How
- Find the square corner. The side across from it is the hypotenuse; label it hyp.
- Put your finger on the angle the problem asks about.
- Of the two legs, the one touching that angle is adj.
- The leg that does not touch that angle is opp.
- If the problem switches to the other acute angle, swap opp and adj. The hyp stays the same.
Worked example
Worked example
Name the sides from both acute angles
A right triangle has legs 3 and 4 and hypotenuse 5. Angle A is the corner where the leg 4 meets the hypotenuse. Angle B is the corner where the leg 3 meets the hypotenuse. Name opp, adj and hyp for A, then for B. In words, label the same sides from two different corners.
Show the steps and the answer
- The legs 3 and 4 meet at the square corner, and the side across from it is 5. So hyp for both angles.The hypotenuse faces the right angle, whichever acute angle you stand at.
- Stand at A. The leg touching A is 4, so adj .Adjacent means next to: it is one of the two sides that form the corner at A, and it is not the hypotenuse.
- The leg across from A is 3, so opp .It is the one side that does not touch A.
- Stand at B. Now the leg 3 touches you and the leg 4 is across: adj , opp , hyp .Moving to the other acute angle swaps opposite and adjacent.
- At A:
- opp = 3
- adj = 4
- hyp = 5
- At B:
- opp = 4
- adj = 3
- hyp = 5
The trap
Calling the hypotenuse the adjacent side. The hypotenuse also touches θ, but it is never called adjacent. Name the hypotenuse first, set it aside, and only then decide which of the two legs touches θ.
2 The six trig functions of an acute angle
The rule
For an acute angle in a right triangle: .
.
How
- Name opp, adj and hyp from the angle asked about.
- If a side is missing, find it with the Pythagorean theorem.
- Write sin, cos and tan with SOH-CAH-TOA.
- Flip each one: csc is sin upside down, sec is cos upside down, cot is tan upside down.
- Reduce every fraction and rationalize any square root left on the bottom.
Worked example
Worked example
Six trig functions of an acute angle when a leg is missing
In right triangle KLM the right angle is at L. The leg KL is 3 units long and the hypotenuse KM is 7 units long. Find the exact values of all six trigonometric functions of angle K. Write each answer as a reduced fraction with no square root in the denominator.
Show the steps and the answer
- Name the sides from angle K. The hypotenuse is KM , the side across from the right angle at L. The adjacent side is KL , the leg that touches K. The opposite side is LM, the leg across from K. Its length is not given.Opp and adj depend on which acute angle is asked about, but hyp is always across from the right angle. Naming the sides from angle K first keeps its ratios from being swapped with those of angle M.
- Find the missing leg with the Pythagorean theorem: , so . Then , so and LM .In a right triangle the squares of the legs add up to the square of the hypotenuse. A length is positive, so only the positive root counts. Taking the perfect square 4 out of 40 puts the root in simplest form.
- Write the three basic ratios with SOH-CAH-TOA, using opp , adj and hyp : .SOH: sine is opposite over hypotenuse. CAH: cosine is adjacent over hypotenuse. TOA: tangent is opposite over adjacent.
- Flip each ratio to get the other three: .Cosecant, secant and cotangent are the reciprocals of sine, cosine and tangent: csc K = , sec K = , cot K = .
- Two answers have a root on the bottom, so multiply top and bottom of each by : , and . Then confirm that all six fractions are reduced. None of the pairs 2 and 7, 3 and 7, 2 and 3, 7 and 20, or 3 and 20 shares a common factor. equals 1, so multiplying by it does not change the value. Since 2 · = 2 · 10 = 20, the root leaves the bottom. A fraction is in simplest form when the whole numbers on top and bottom share no factor greater than 1.
Work to write
- opp = LM, adj = KL = 3, hyp = KM = 7
- L = − = 49 − 9 = 40
- LM = = 2
- csc K = =
- sec K =
- cot K = =
The trap
Naming sides by where they sit on the page. Figures put the angle in different corners, so the leg on the left is not always adjacent. Always name the sides from the angle's point of view.
Quick check
Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 6
Reduce enlarged ratios
opp = 9, adj = 12, hyp = 15. Find all six functions. In words, divide named lengths and reduce.
Show the steps and the answer
- .Divide each top and bottom by their common factor 3.
- .Flipping reduced ratios gives reduced reciprocals.
- csc θ =
- sec θ =
- cot θ =
3 The fundamental identities
The rule
for every angle.
and require ; and require .
Where both reciprocal expressions exist, . requires ; requires .
How
- Read squared notation first: θ = (sin θ. Square the trig value, not the angle.
- If the given value is csc or sec, flip it to obtain sin or cos. If it is cot, its reciprocal gives tan only when cot is nonzero and tan exists.
- If sin or cos is known, substitute into θ + θ = 1. Subtract its square from both sides to isolate the missing square.
- Take the nonnegative square root to find the size. For an acute angle the missing sine or cosine is positive, so choose that sign. is 0, not positive.
- If tan is known, use θ + 1 = θ, choose positive sec for an acute angle, then flip for cos. Multiply tan by cos for sin.
- Use tan = sin ÷ cos and cot = cos ÷ sin when their denominators are nonzero. Flip cosine for secant and sine for cosecant.
- Reduce and rationalize. Check that the squares add to 1 and each reciprocal pair multiplies to 1.
Worked example
Worked example
Recover five functions from an acute cosecant
In a right triangle, csc θ = 7. Find the other five functions. In words, you know the hypotenuse divided by the opposite leg; recover the remaining ratios.
Show the steps and the answer
- .Cosecant and sine are reciprocals.
- becomes . Subtract from both sides: .This isolates the unknown cosine square. Subtracting the same fraction from both sides keeps the equation balanced.
- . = = 4. Cosine is positive for an acute angle.
- .The 7s cancel; multiplying top and bottom by gives bottom 4 × 3 = 12.
- ; .Both known values are nonzero, so their reciprocals exist. For secant multiply top and bottom by ; the bottom becomes 4 × 3 = 12.
- cot θ = 4
- sec θ =
The trap
Reading θ as sin(). θ means (sin θ: find sine first, then square its value. Also, θ + θ = 1 relates squares; sin θ + cos θ is usually not 1. With sine and cosine , the ordinary sum is .
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
The given value is a reciprocal
θ is acute and sec θ = . Find the other five functions. In words, obtain cosine first.
Show the steps and the answer
- .Secant is the nonzero reciprocal of cosine.
- , so .Subtract the cosine square, then take the positive acute sine.
- .Divide the outputs in the required orders.
- .Flip sine; secant was already given.
- cot θ =
- csc θ =
4 The special angles: 30°, 45° and 60°
The rule
: sides 1, 1, .
: the side across from is 1, across from is , across from is 2. ; the cosines are the same list in reverse order. For an angle that makes full turns and then ends on an acute ray, we define its trig values to be those of that acute direction; this extends the triangle definition using the terminal side.
How
- Sketch the triangle that contains your angle and write its three sides.
- Stand at your angle and name opp, adj and hyp.
- Read sin, cos and tan with SOH-CAH-TOA.
- Flip for csc, sec and cot, and rationalize.
- Use the sine reference diagram for the three acute special angles: each input and its exact output share one column. The axis lesson will add the two endpoint columns at 0° and 90°.
Worked example
Worked example
Read six ratios from a scaled special triangle
A right triangle has opposite leg 4, adjacent leg 4 and hypotenuse 8, with respect to β. Find all six functions. In words, turn these three lengths into six ratios.
Show the steps and the answer
- opp , adj , hyp .The question identifies the legs relative to β.
- ; .Sine uses opposite over hypotenuse; cosine uses adjacent over hypotenuse. Divide top and bottom by 4.
- ; .Tangent and cotangent compare the legs in opposite orders.
- ; .Use hypotenuse over adjacent and hypotenuse over opposite; rationalize the last denominator.
- cot β =
- sec β = 2
- csc β =
The trap
Swapping the 30° and 60° values. The shortest side, 1, faces the smallest angle, 30°, so sin 30° = is the small sine and sin 60° = (about 0.866) is the large one. From 0° to 90°, sine grows as the angle grows.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
Rationalize an equal-leg reciprocal
Find sec 405° exactly. In words, find hypotenuse over adjacent after removing a full turn.
Show the steps and the answer
- .A full turn ends on the same ray, so use the equal-leg triangle.
- .Adjacent over hypotenuse is 1 over ; multiply top and bottom by .
- .Secant flips the nonzero cosine; rationalize with and reduce.
5 Using the identities: rewrite and prove
The rule
For an acute angle, and .
An identity holds on its common domain. Use when dividing by and when dividing by .
How
- State the allowed inputs before rewriting: tan and sec need cos θ ≠ 0; cot and csc need sin θ ≠ 0. A displayed fraction also needs its denominator nonzero.
- Pick the messier side, usually the one with more terms or fractions.
- Rewrite every tan, cot, sec and csc using sin θ and cos θ.
- Combine fractions over a common denominator, or multiply out brackets.
- Replace 1 − θ with θ, 1 − θ with θ, and θ + θ with 1.
- Cancel common factors only when those factors are nonzero. Stop at the other side; preserve the original allowed inputs.
Worked example
Worked example
Prove sec θ − cos θ = sin θ tan θ
Prove sec θ − cos θ = sin θ tan θ for cos θ ≠ 0. In words, rewrite the left expression until it becomes the right expression.
Show the steps and the answer
cos θ ≠ 0
- Work where .Both sec θ and tan θ divide by cosine; this records the original domain before any cancellation.
- LHS .The left side has more pieces, so start there. Reciprocal identity: sec θ = .
- .cos θ ≠ 0 lets you multiply cosine by , which equals 1. Match the bottoms, then subtract the tops.
- .Pythagorean identity: 1 − θ = θ.
- RHS.Split θ into sin θ × sin θ, and = tan θ.
The trap
Testing one angle and calling the identity proved. One angle can agree by coincidence; a proof needs algebra that works for every θ. Use a test angle only to check your algebra afterward.
Quick check
Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 3
One reciprocal and a cancellation
Prove sec θ cos θ = 1 for cos θ ≠ 0. In words, replace secant with its definition.
Show the steps and the answer
cos θ ≠ 0
- LHS .Secant is reciprocal cosine on this domain.
- RHS.The denominator and cancelled factor are nonzero.
6 Definition 2: a point on the terminal side
The rule
.
(), (), (), ().
How
- Write down x and y with their signs.
- Find r = and simplify the root. r is always positive.
- sin θ = and cos θ = : reduce, then rationalize.
- tan θ = and cot θ = : r is not involved.
- sec θ = and csc θ = : the flips of cos and sin.
- Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.
Worked example
Worked example
All six values from the point P(-6, -9)
The terminal side of an angle θ in standard position passes through the point P(-6, -9). Find the exact values of sin θ, cos θ, tan θ, cot θ, sec θ and csc θ. Simplify every square root and leave no square root in a denominator.
Show the steps and the answer
- Write the coordinates of P with their signs: .Definition 2 works with any point (x, y) on the terminal side other than the origin. The minus signs stay attached to the numbers because they decide the signs of the answers.
- .r is the distance from the origin to P, so it is the positive root, and squaring removes both minus signs. 9 is the largest perfect square that divides 117, so = · = 3.
- . .Cancel the common factor 3 first so the numbers stay small. Then multiply by , which equals 1, to clear the root from the denominator, since · = 13.
- and .These two use only the coordinates, so r is not involved and no root appears. Both are defined because x = -6 ≠ 0 and y = -9 ≠ 0. A negative divided by a negative is positive, and the common factor 3 cancels.
- and .sec θ and csc θ are the flips of cos θ = and sin θ = . With r on top, the root is already in the numerator, so after cancelling the 3 there is nothing to rationalize.
- Check each sign: . and each pair r with one negative coordinate, so all four are negative. and divide one negative coordinate by the other, so both are positive. The values found agree.A ratio is negative exactly when its numerator and denominator have opposite signs. r is always positive, so a ratio that uses r takes the sign of the coordinate in it.
Work to write
- x = -6, y = -9
- cot θ = =
- sec θ = = -
- csc θ = = -
- x < 0 and y < 0 with r > 0: sin, cos, sec, csc negative; tan, cot positive
The trap
Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
A large point and a small equivalent point
P(9, −12) is on a terminal side. Find all six functions. In words, find the distance and reduce ratios without dropping the negative y.
Show the steps and the answer
- .Squares erase the coordinate signs; distance uses the positive root.
- .Use , and and divide common factors.
- .Use , and with the original signs.
- cot = −
- sec =
- csc = −
7 Quadrantal angles and undefined values
The rule
and at the axis points with .
and are undefined at ; and are undefined at , where n is any integer (positive, negative or zero). In radians these are and .
How
- If this is a quadrantal angle, add or subtract full turns until 0° ≤ θ < 360°; in radians use turns of 2π.
- Match its terminal side to (1, 0), (0, 1), (−1, 0) or (0, −1).
- Read sin θ = y and cos θ = x.
- Write tan = , cot = , sec = and csc = .
- Inspect every denominator first. A zero denominator gives undefined; otherwise do the division.
Worked example
Worked example
Axis values after clockwise turns
Find all six functions at −540° and −450°. In words, remove complete turns, find the axis point, then read the six ratios.
Show the steps and the answer
- , so use , with .Adding full turns preserves the terminal side.
- ; ; .Substitute y, x and r in the coordinate definitions.
- is undefined; ; is undefined.Cotangent and cosecant divide by y = 0. Secant is .
- , so use , with .The terminal side points down after the full turns are removed.
- ; ; ; .Read the coordinates and substitute in the ratios.
- and are undefined.Their denominator x is 0.
- At −540°:
- sin = 0
- tan = 0
- cot = undefined
- sec = −1
- csc = undefined
- At −450°:
- cos = 0
- tan = undefined
- cot = 0
- sec = undefined
- csc = −1
The trap
Writing 0 when the answer is undefined, or the reverse. = 0 is a real value; has no value. Look at which coordinate sits on the bottom before you answer.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
A negative axis angle
Find tan(−270°) and cot(−270°). In words, identify which fraction has a zero bottom.
Show the steps and the answer
- , so .A clockwise three-quarter turn ends where a counterclockwise quarter turn ends.
- is undefined; .Tangent divides by x; cotangent divides by y.
- tan(−270°) = undefined
- cot(−270°) = 0
8 Signs by quadrant: find the quadrant first
The rule
Inside Quadrants I, II, III, IV, the positive functions are respectively: all six; sin and csc; tan and cot; cos and sec.
Every remaining function is negative. gives the missing magnitude. The quadrant chooses the sign of or in front of its nonnegative square root.
How
- For each clue, list every quadrant where it is true. A zero value points to an axis instead.
- Keep only the quadrants shared by every clue. If more than one remains, report that the information does not determine one quadrant.
- Use θ + θ = 1 to isolate the square of the missing partner.
- Take the nonnegative square root for its magnitude, then attach the sign required by the quadrant.
- Compute tan = , cot = , sec = and csc = , checking denominators.
- Check the squared identity and every sign against the clues.
Worked example
Worked example
Use two sign clues before taking a root
sin θ = and tan θ < 0. Find the other five functions. In words, decide where the terminal side is, then recover the missing ratios.
Show the steps and the answer
- allows I or II; allows II or IV. Their common quadrant is II.Only Quadrant II satisfies both sign clues, so cosine must be negative.
- .This isolates the square of the unknown cosine.
- . = 3; choose the negative root for Quadrant II.
- .The 7s cancel; multiply top and bottom by .
- ; ; .Take reciprocals of nonzero tangent, cosine and sine.
- Quadrant II
- cot θ = −
- sec θ = −
- csc θ =
The trap
Taking the positive square root out of habit. The principal square root, written , is nonnegative, including = 0. A missing sine or cosine can still be negative: choose its sign from the quadrant. When a sign clue leaves two possible quadrants, keep both instead of guessing.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
A missing partner with whole-number roots
sin β = − and tan β > 0. Find cos β and tan β. In words, choose the quadrant and recover cosine.
Show the steps and the answer
- Negative sine allows III or IV; positive tangent allows I or III. Choose III.III is their only overlap, so cosine is negative.
- , so .The squared identity gives magnitude , and III gives the sign.
- .Equal bottoms cancel; two negative signs give a positive quotient.
- Quadrant III
9 Definition 3: the unit circle
The rule
and .
and require ; and require .; ; , where n is any integer.
How
- For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
- Read x and y from the Terminal point P(t), and check + = 1 if a point is supplied.
- Write cos t = x and sin t = y.
- Use tan = , cot = , sec = and csc = , checking each denominator.
- For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
- For several moves, apply them one at a time and check the resulting quadrant.
Worked example
Worked example
Clockwise travel to t = −: terminal point by symmetry and the six functions
A point starts at (1, 0) on the unit circle + = 1 and travels clockwise a distance of , so it marks the real number t = −. You may use P() = (, ). Describe where the travel ends. Then find the terminal point P(t) by applying the symmetry rules one move at a time, name its quadrant and confirm that it lies on the unit circle. Finally, find the exact values of sin t, cos t, tan t, cot t, sec t and csc t, rationalizing every denominator.
Show the steps and the answer
- Locate the end of the travel. Split the distance: . Going clockwise from (1, 0), the is one full turn back to (1, 0). The is a half turn to . The last carries the point on from toward (0, 1), so P(t) is in Quadrant II.t is negative, so the point travels clockwise a distance |t| = . Clockwise motion passes (1, 0), (0, −1), (−1, 0) and (0, 1) in that order, so a point just past (−1, 0) is in Quadrant II.
- Write t as moves applied to : .− − − = −. Each move (change the sign, subtract π, subtract 2π) has a known effect on the coordinates of P().
- Move 1: , in Quadrant IV.P(−t) = (x, −y): changing the sign of t flips only the y-coordinate of P() = (, ).
- Move 2: , in Quadrant II.P(t − π) = (−x, −y): subtracting π is a half turn, which flips both signs of (, −).
- Move 3: , still in Quadrant II. So .P(t + 2nπ) = (x, y) with n = −1: a full turn keeps both coordinates. Quadrant II agrees with the travel in the first step.
- Check the point: .Every terminal point lies on + = 1. Sign flips do not change or , so this also confirms the supplied point P().
- Read and . Write and .The unit-circle definition is P(t) = (cos t, sin t). Cosine is the x-coordinate and sine is the y-coordinate.
- Check the denominators: and .tan t and sec t divide by x, and cot t and csc t divide by y. Both are nonzero, so all four functions are defined here.
- , and .Dividing by a fraction is the same as multiplying by its reciprocal. Multiplying the top and bottom of − by removes the root from the denominator.
- , and .The reciprocal of − is −, which is rationalized by multiplying top and bottom by . The reciprocal of is 2.
Work to write
- = 2π + π + clockwise from (1, 0), ending in Quadrant II
- P(−) = (−, ), Quadrant II
- tan t = −, cot t = −
- sec t = −, csc t = 2
The trap
Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Six values from a new point
P(u) = (, ). Find all six functions. In words, check the unit point, read its coordinates and form four ratios.
Show the steps and the answer
- .The squared coordinates confirm radius 1.
- and .Read y and x respectively.
- .The shared 17s cancel in quotients; dividing 1 by a nonzero fraction flips it.
- cot u =
- sec u =
- csc u =
10 Calculator values: DEG or RAD mode
The rule
Use DEG for degrees and RAD for radians.
Here an angle with no unit means radians. requires ; and require . Round only the final value, retaining requested trailing zeros.
How
- Read the angle unit from the degree sign or words. If none is written, this course means radians.
- Set DEG or RAD before entering the angle, and use parentheses around an entire fraction, negative angle or multiple of π.
- Use the function key if available. Otherwise compute sec = 1 ÷ cos, csc = 1 ÷ sin, cot = cos ÷ sin, all with the same angle and mode.
- Check whether an exact axis input makes the needed denominator zero. If it does, write undefined rather than trusting a very large calculator display.
- Keep the unrounded value in calculator memory while doing reciprocals or other arithmetic.
- For p decimal places, inspect digit p + 1: 0 through 4 leaves digit p unchanged; 5 through 9 rounds the magnitude up. Restore the sign and keep exactly p places.
Worked example
Worked example
Five original calculator approximations
Round to four decimal places: (a) sin 52°, (b) sin 52, (c) cos(−), (d) tan 1.3, (e) sec 67°. In words, identify the angle unit before computing each decimal.
Show the steps and the answer
52°: DEG
52: RAD
sec 67° = 1 ÷ cos 67°
Round the final value.
52°: DEG
52: RAD
sec 67° = 1 ÷ cos 67°
Round the final value.
- (a) DEG mode: , so 0.7880.The degree sign selects DEG; the fifth decimal is 1.
- (b) RAD mode: , so 0.9866.No unit means radians; the fifth decimal is 2.
- (c) RAD mode: , so .Enter the entire angle in parentheses; the fifth decimal is 2.
- (d) RAD mode: , so 3.6021.The fifth decimal is 0; preserve four digits after the decimal point.
- (e) DEG mode: , so 2.5593.If there is no secant key, use 1 ÷ cos 67°. Keep cosine's stored precision until the final rounding.
- (a) 0.7880
- (b) 0.9866
- (d) 3.6021
- (e) 2.5593
The trap
Leaving the calculator in the wrong mode. Before any calculator question, look for a degree sign and set the mode. Quick test: sin 30 should show 0.5 in DEG mode.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
A negative radian angle with π
Find cos(−) to four decimals. In words, enter the whole negative radian angle and round its cosine.
Show the steps and the answer
- Set RAD and enter , with the entire angle inside parentheses.The input is radians and the minus sign belongs to the whole angle.
- The result is approximately , which rounds to .The fifth decimal is 2; retain four places and the minus sign.
11 Quick checks for the whole unit
Quick check 1 of 8
sin θ > 0 and cos θ < 0. Which quadrant is θ in?
Show the steps and the answer
Quick check 2 of 8
Find sec 420° and csc 405° exactly.
Show the steps and the answer
- sec 420° = 2, because removing 360° gives cosine .
- csc 405° = , because removing 360° gives sine , whose reciprocal is .
Quick check 3 of 8
Find tan and cot .
Show the steps and the answer
- tan is undefined, because removing 2π gives the point (0, 1) and divides by zero.
- cot = 0, because = .
Quick check 4 of 8
Can sin θ equal 1.2?
Show the steps and the answer
Quick check 5 of 8
Rationalize .
Show the steps and the answer
Quick check 6 of 8
θ is acute and cos θ = . Find sin θ and tan θ.
Show the steps and the answer
- sin θ = , because 1 − = and the acute-angle root is positive.
- tan θ = , because ÷ = .
Quick check 7 of 8
Is the point (, ) on the unit circle?
Show the steps and the answer
Quick check 8 of 8
Why does sin 30 show −0.98803 in RAD mode?