Quarry School

Inverse trigonometric functions: crash course

about 32 min to listen8 lessons15 questions to tryUnit 7 of 11

Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.

Starts here no skill from another unit needed first

1 Why a trig function needs its domain cut before it can have an inverse

about 6 minOpen the full lessonOnly this lesson

The rule

Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once.

A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−π2, π2], where sin θ takes every value in [−1, 1] exactly once.

How

  1. Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
  2. Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at π2, falls to −1 at 3π2 and repeats every 2π.
  3. Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
  4. If it ever does, write the proof as a pair: two inputs with one shared output, such as sin(π6) = sin(5π6) = 12. The function is not a one-to-one function, so on that domain it has no inverse function.
  5. To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−π2, π2].
  6. Check the stretch: evaluate sine at its ends and its middle, sin(−π2) = −1, sin 0 = 0 and sin(π2) = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.

Worked example

Worked example

Sine fails the test, and the kept piece passes

(a) Find two angles with the same sine, and use them to show that sine fails the horizontal line test.
(b) Show that on the angles −π2 ≤ θ ≤ π2, sine takes every value in [−1, 1] exactly once.

Show the steps and the answer
x = cos θy = sin θπ/6
The point at π6 is (32, 12): its height is 12.
x = cos θy = sin θ5π/6
Its mirror image across the vertical axis, at 5π6, is (−32, 12): the same height, 12.
(−π/2, −1)(π/2, 1)domainrange−π/2π/2−11
The kept piece climbs from height −1 to height 1 and never turns back.
  1. Say what part (a) asks: find one height that two different angles share. Say what part (b) asks: on the kept angles, show that no height repeats and that no height from −1 to 1 is missing.A horizontal line at height h touches the sine graph at every angle whose sine is h, so a shared height is a horizontal line that touches twice.
  2. Start with the special angle π6. Its point on the unit circle is (32,12), so sin(π6)=12.Sine is the height, the y-coordinate, of the point on the unit circle, and π6 is the 30° special angle.
  3. Mirror that point across the vertical axis: (32,12) becomes (−32,12). This new point stops π6 short of the half turn π, so its angle is π−π6=6π6−π6=5π6.A mirror across the vertical axis keeps the height and swaps right for left. To subtract, write π as 6π6 so both fractions have the bottom 6.
  4. So sin(5π6)=12 as well: the horizontal line y=12 touches the sine graph at θ=π6 and at θ=5π6.Both points have the same height, 12.
  5. Answer (a): two different angles share the output 12, so sine fails the horizontal line test and is not a one-to-one function.The test fails as soon as one horizontal line touches twice, so one pair is a complete proof.
  6. It is worse than two: π6+2π=π6+12π6=13π6 lands on the same point, so sin(13π6)=12 too, and every further full turn adds another angle.2π is one full turn, and a full turn ends where it started.
  7. For (b), place the kept angles on the circle: θ=−π2 is the bottom, (0,−1); θ=0 is the right end, (1, 0); θ=π2 is the top, (0, 1).−π2 is a quarter turn clockwise from (1, 0), and π2 is a quarter turn counterclockwise.
  8. As θ grows from −π2 to π2, the point travels up the right half of the circle, from the bottom to the top. Its height climbs the whole way.On the right half each counterclockwise step lifts the point; the height starts to fall only after the top, and the top is where the piece ends.
  9. No repeats: a height that only climbs never returns to a value it already had, so every horizontal line touches the kept piece at most once.That is what passing the horizontal line test means.
  10. Nothing missing: the height moves smoothly from −1 up to 1, so it passes through every value in between, and the square brackets keep both ends, where the heights are −1 and 1.Like an elevator riding from the lowest floor to the highest: it passes every level on the way, and both end floors are part of the ride.
  11. Look back at the pair from (a): π6 is in the kept piece, but 5π6 is not, because π2=3π6 and 5π6 is bigger than 3π6. The cut threw the duplicate away.To compare fractions of π, give them the same bottom and compare the tops: 5 > 3.
Answer
  • (a) sin(π6) = sin(5π6) = 12, so the line y = 12 crosses the sine graph twice: sine fails the horizontal line test.
  • (b) On [−π2, π2] the height climbs from −1 to 1 without turning back, so each value in [−1, 1] is taken exactly once.
Double-check Second way, from the graph. (a) The sine wave rises to its top at θ = π2 and comes down the same way it went up, so two angles the same distance before and after π2 have the same height. π6 sits π3 before the top, since π2 − π6 = 3π6 − π6 = 2π6 = π3, and 5π6 sits π3 after it, since 5π6 − π2 = 5π6 − 3π6 = 2π6 = π3, so their heights match. (b) Evaluate the ends and the middle: sin(−π2) = −1, sin 0 = 0, sin(π2) = 1. That is bottom, middle, top in order, with no top or bottom strictly between, so the piece never turns around.

The trap

Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin(π6) = sin(5π6) = 12 still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−π2, π2]. Say it to yourself: sine climbs the right side.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A quarter lap, nothing repeated, something missing

On the angles in [0, π2], does any height repeat? Is every height from −1 to 1 reached?

Show the steps and the answer
domainrangeπ/2−11
The quarter lap only climbs, but the dashed line at −12 never meets it: negative heights are missing.
  1. Say what it asks: run the same two checks, repeats and missing heights, on the quarter lap from 0 to π2.A usable piece must pass both.
  2. From 0 to π2 the point moves from (1, 0) up to the top, (0, 1), through the first quadrant, rising the whole way.In the first quadrant each counterclockwise step lifts the point.
  3. The height climbs from sin0=0 to sin(π2)=1 and never comes back down, so no height repeats.A height that only climbs cannot return to an earlier value.
  4. But every height on this piece is between 0 and 1. The height −12, for example, is never reached.Points in the first quadrant have a y-coordinate of 0 or more.
  5. So a backward machine built on this piece would have no angle to hand back for −12: the piece has no repeats but is too short.An inverse sine that answers every height from −1 to 1 needs an angle for each of them.
Answer
  • No height repeats.
  • Only the heights in [0, 1] are reached, so every negative height is missing.
  • Sine on [0, π2] can be run backward, but only for heights from 0 to 1, so it cannot be the piece for an inverse sine that answers every height from −1 to 1.
Double-check On the graph, the quarter lap from (0, 0) to (π2, 1) stays on or above the horizontal axis, so the dashed line at height −12 never meets it.

2 The inverse sine

about 3 minOpen the full lessonOnly this lesson

The rule

y= arcsin x, also written y=sin−1 x, means siny=x and −π2≤y≤π2.

Domain: [−1,1]. Range: [−π2,π2], which is −90° to 90°.

How

  1. Turn the question into a sine question: y = arcsin x asks for the angle y from −π2 to π2 with sin y = x. The input x is a height; the answer y is an angle.
  2. Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
  3. Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
  4. Check the answer: it lies between −π2 and π2, and its sine gives back x.

Worked example

Worked example

An exact value with a negative input

Evaluate arcsin(−32) exactly.

Show the steps and the answer
x = cos θy = sin θ−π/3
At −π3, a 60° turn clockwise, the point is (12, −32): its height is the input.
-60°300°same terminal side
−60° and 300° end at the same point, but only −60°, which is −π3, lies in the range of arcsin.
  1. Say what it asks: the input −32 is a height. Find the one angle from −π2 to π2 whose sine is −32.That is the definition of arcsin: the angle on the right half of the unit circle at the given height.
  2. Check the input: 3≈1.732, so −32≈−0.866, which is between −1 and 1.Heights on the unit circle run from −1 to 1, so this check tells you an answer exists.
  3. Drop the minus sign for a moment. The angle from 0 to π2 with sine 32 is π3, which is 60°.The point at π3 is (12, 32), so its height is 32.
  4. Put the sign back. The height is negative, so the point is below the x-axis on the right half: make the same turn clockwise, −π3.The point at −π3 is the mirror image of the point at π3 across the x-axis: same distance across, opposite height.
  5. Confirm the range: −90°<−60°<90°, so −π3 is between −π2 and π2.arcsin answers only with angles in that stretch, and on a number line −90 sits to the left of −60.
  6. Set aside 4π3 (240°) and 5π3 (300°). Both have sine −32, but both are bigger than π2.4π3 is on the left half; 5π3 is the same point as −π3, reached the long way around, so it is outside the range.
Answer
arcsin(−32) = −π3, which is −60°
Double-check Take the sine of the answer: the point at −π3 is (12, −32), so sin(−π3) = −32, the input. Second way, with the 30-60-90 triangle of hypotenuse 1: the side across from the 60° angle is 32, and at −60° the triangle hangs below the x-axis, so the height is −32.

The trap

Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

The first negative input

Evaluate arcsin(−12).

Show the steps and the answer
−π/6terminal sideinitial side
A negative angle is a clockwise turn: −π6 dips 30° below the positive x-axis.
  1. Say what it asks: find the angle from −π2 to π2 whose sine is −12.That is what arcsin means.
  2. Check the input: −12=−0.5, which is between −1 and 1.So an answer exists.
  3. Drop the sign for a moment: the angle from 0 to π2 with sine 12 is π6.The point at π6 is (32, 12).
  4. Put the sign back: the height is negative, so the point is below the x-axis on the right half. Make the same turn clockwise: −π6.The point at −π6 is the mirror image of the point at π6 across the x-axis, so its height is −12.
  5. Set aside 7π6 and 11π6. Both have sine −12, but both are bigger than π2.7π6 is on the left half; 11π6 is the same point as −π6, reached the long way around, and the range allows only the short clockwise name.
Answer
arcsin(−12) = −π6, which is −30°
Double-check The point at −π6 is (32, −12), so sin(−π6) = −12, the input; and −30° is between −90° and 90°.

3 The inverse cosine

about 4 minOpen the full lessonOnly this lesson

The rule

The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0,π].

So y= arccos x, also written y=cos−1 x, means cosy=x and 0≤y≤π.
Domain of arccos: [−1,1]. Range of arccos: [0,π].

How

  1. Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
  2. Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
  3. Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to π2. An input of 0 puts it straight up, at π2. A negative input puts it on the top-left quarter, so the answer is past π2, up to π.
  4. In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
  5. Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.

Worked example

Worked example

A negative input: arccos(−12)

Find the exact value of arccos(−12). In words: the input is −12; find the one angle from 0 to π whose cosine is −12.

Show the steps and the answer
x = cos θy = sin θ2π/3
The point at 120° on the top half has x-coordinate −12, so arccos(−12) = 2π3.
  1. Check the input: −12 is between −1 and 1.Only numbers from −1 to 1 are left-right positions on the unit circle, so only they have an inverse cosine.
  2. Turn the question into a picture: find the point on the top half of the unit circle whose x-coordinate is −12.The cosine of an angle is the x-coordinate of its point, and the inverse cosine answers only with angles from 0 to π, which sweep the top half.
  3. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative, and the top-left quarter is the part of the top half that lies there.
  4. Start from the positive twin: the 60° point is (12,32), so cos60°=12.60° is the special angle whose point sits 12 to the right of center.
  5. Mirror that point across the vertical axis: it becomes (−12,32), at 180°−60°=120°.The mirror keeps the height, flips the sign of the x-coordinate, and turns 60° into 180° − 60°, which lands in the top-left quarter as required.
  6. Convert to radians: 120°×π180°=120π180=2π3.π radians is 180°, and 120 over 180 reduces to 2 over 3 when you divide top and bottom by 60.
  7. Write the answer: arccos(−12)=2π3.2π3 lies from 0 to π and its cosine is −12, which is exactly what the definition asks for.
Answer
arccos(−12) = 2π3, which is 120°
Double-check Take the cosine of the answer: cos 2π3 = −12, the x-coordinate of the 120° point, and 2π3 ≈ 2.09 (rounded) lies from 0 to π ≈ 3.14. The tempting −π3 fails both checks: it is below 0, and cos(−π3) = +12.

The trap

Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

The left end, arccos(−1)

Evaluate arccos(−1). In words: the input is −1; find the angle from 0 to π whose cosine is −1.

Show the steps and the answer
x = cos θy = sin θπ
A half turn reaches the far left point (−1, 0), so arccos(−1) = π.
  1. Check the input: −1 is in [−1,1].The square bracket at −1 means −1 itself is included.
  2. Find the point on the top half whose x-coordinate is −1: it is (−1,0), at the far left.The circle has radius 1, so it reaches x = −1 at one point only, the far left.
  3. Reaching the far left takes a half turn: 180°, which is π.A half turn is half of 2π.
Answer
arccos(−1) = π
Double-check cos π = −1, and π is the right end of [0, π], included by the square bracket. Two tempting answers fail: −π also has cosine −1 but is negative, outside the range; −π2 is the inverse sine's answer for −1, and cos(−π2) = 0.

4 The inverse tangent

about 3 minOpen the full lessonOnly this lesson

The rule

y= arctan x, also written y=tan−1 x, means tany=x and −π2<y<π2.

Domain: all real numbers, (−∞,∞). Range: (−π2,π2), with both ends left out. Horizontal asymptotes: y=−π2 and y=π2.

How

  1. Read arctan(a) as a question: which angle, strictly between −π2 and π2, has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
  2. If a has a square root in its bottom, rewrite it to match the table: 13 = 33.
  3. Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
  4. Find a in the tan θ column of the table and read the angle at the start of its row.
  5. Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between −π2 and π2.

Worked example

Worked example

An exact value with a negative input: arctan(−3)

Find the exact value of arctan(−3).

Show the steps and the answer
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
Arctan reads this table upward: the cell holding −3 in the tan θ row points up to −π3.
−π/3terminal sideinitial side
A 60° clockwise turn ends below the x-axis on the right half, where tangents are negative.
  1. Say what the question asks: find the one angle θ, with −π2<θ<π2, whose tangent is −3.That is the definition of arctan. The input −3 is a tangent value, and the output must be an angle on the right half of the circle, not at its very top or bottom.
  2. Decide where to search: below the x-axis, between −π2 and 0.Tangent is height ÷ across. On the right half the across is positive, so a negative tangent needs a negative height, which means a point below the x-axis.
  3. Find −3 in the tanθ row of the table and follow the arrow up: it sits under −π3.The point at −π3 is (12, −32), and its height divided by its across is −3. Reading the table from the bottom row up is exactly what arctan does.
  4. Make sure the angle is allowed: −π3 is −60°, and −90°<−60°<90°.Other angles also have tangent −3, such as 2π3 (120°) and 5π3 (300°), but they are outside the range, so they cannot be the answer.
  5. Write the answer: arctan(−3)=−π3.−π3 is the principal value: the only angle in the range whose tangent is −3.
Answer
arctan(−3) = −π3, which is −60°
Double-check Work out tan(−π3) from its point (12, −32): (−32) ÷ 12 = (−32) × 21 = −3, the number we started with. And −π3 is strictly between −π2 and π2.

The trap

Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Rung 4, a negative input: arctan(−1)

Find arctan(−1).

Show the steps and the answer
−π/4terminal sideinitial side
A 45° clockwise turn ends below the x-axis, halfway down to the bottom of the circle.
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
The cell holding −1 in the tan θ row points up to −π4.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=−1?That is the definition of arctan.
  2. −1 is negative, so search below the x-axis: θ is between −π2 and 0.On the right half the across is positive, so a negative tangent needs a negative height.
  3. A tangent of −1 means the height is the across with its sign flipped. Below the x-axis that happens 45° down, at the point (22,−22); in the tanθ row of the table, −1 sits under −π4.Height and across have the same size and opposite signs, so their quotient is −1.
  4. Name the angle by turning clockwise: −π4.The range runs from −π2 to π2, so a point below the x-axis gets a negative name. The same point is also called 7π4, but 7π4 is outside the range.
  5. Answer: arctan(−1)=−π4.It is the only allowed angle with tangent −1.
  6. Watch the gotcha: do not answer 3π4.tan 3π4 = 22 ÷ (−22) = −1 as well, but 3π4 is 135°, on the left half, outside the range.
Answer
arctan(−1) = −π4, which is −45°
Double-check tan(−π4) = (−22) ÷ 22 = −1, the number we started with, and −90° < −45° < 90°.

5 Exact values by the sign and the quadrant

about 4 minOpen the full lessonOnly this lesson

The rule

Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.

A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π−r for arccos. In symbols: arcsin(−x)=−arcsin x, arctan(−x)=−arctan x, arccos(−x)=π− arccos x. The result is the principal value: the one angle inside the range.

How

  1. Name the reference angle: cover any minus sign and find the special angle from 0 to π2 whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
  2. Read the sign of the input: zero, positive or negative.
  3. Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−π2) for arcsin, the left end (π) for arccos.
  4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
  5. Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.

Worked example

Worked example

Same input, two functions: arcsin(−22) and arccos(−22)

Find the exact values of arcsin(−22) and arccos(−22). In plain words: the input is −22 both times. First find the angle in [−π2, π2] whose sine is −22. Then find the angle in [0, π] whose cosine is −22.

Show the steps and the answer
x = cos θy = sin θ−π/4
The arcsin answer: the point below the x-axis on the right half.
x = cos θy = sin θ3π/4
The arccos answer: the point left of the y-axis on the top half.
  1. Reference angle, for both: cover the minus sign and find the angle from 0 to π2 whose sine is 22, and the one whose cosine is 22.At π4 the point on the unit circle is (22, 22). Its height (the sine) and its x-coordinate (the cosine) are both 22, so the reference angle is r = π4 for both questions.
  2. Sign, for both: the input −22 is negative.The minus sign is what moves each answer out of Quadrant I.
  3. arcsin, quadrant: pick Quadrant IV.The range [−π2, π2] is the right half of the circle, Quadrants IV and I. Sine is the height, and the height is negative only in Quadrant IV of those two.
  4. arcsin, angle: write −π4.Inside the range, Quadrant IV is reached by turning r clockwise, and a clockwise turn is a negative angle.
  5. arccos, quadrant: pick Quadrant II.The range [0, π] is the top half of the circle, Quadrants I and II. Cosine is the x-coordinate, and x is negative only in Quadrant II of those two.
  6. arccos, angle: write π−π4=4π4−π4=3π4.The Quadrant II angle with reference angle r stops r short of a half turn, so it is π − r. Writing π as 4π4 gives both fractions the bottom 4, and then the tops subtract: 4π − π = 3π.
Answer
  • arcsin(−22) = −π4
  • arccos(−22) = 3π4
Double-check Evaluate each answer. The point at −π4 is (22, −22), so sin(−π4) = −22, the input, and −π4 lies in [−π2, π2]. The point at 3π4 is (−22, 22), so cos 3π4 = −22, the input, and 3π4 lies in [0, π]. In degrees the answers are −45° and 180° − 45° = 135°. Same input, two different angles, each inside its own range.

The trap

The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Answers at the ends of the range

Find arcsin(−1) and arccos(−1). In plain words: find the angle in [−π2, π2] whose sine is −1, then the angle in [0, π] whose cosine is −1.

Show the steps and the answer
x = cos θy = sin θ−π/2
Straight down: height −1.
x = cos θy = sin θπ
The left end: x-coordinate −1.
  1. arcsin(−1), reference angle: the angle from 0 to π2 with sine 1 is π2.At π2 the point is (0, 1), straight up, with height 1.
  2. arcsin(−1), sign and angle: negative, so the answer is −r=−π2.For arcsin a negative input means a clockwise turn. Turning π2 clockwise points straight down, the bottom end of the range.
  3. arccos(−1), reference angle: the angle from 0 to π2 with cosine 1 is 0.At 0 the point is (1, 0), with x-coordinate 1.
  4. arccos(−1), sign and angle: negative, so the answer is π−r=π−0=π.For arccos a negative input means mirroring across the y-axis: (1, 0) mirrors to (−1, 0), which sits at a half turn, π.
Answer
  • arcsin(−1) = −π2
  • arccos(−1) = π
Double-check At −π2 the point is (0, −1), so sin(−π2) = −1, and −π2 is the bottom end of [−π2, π2], included because of the square bracket. At π the point is (−1, 0), so cos π = −1, and π is the top end of [0, π], also included. The gotcha: these answers sit on an axis, not inside a quadrant, and the four steps still work.

6 A function and its inverse undo each other, with conditions

Open the full lessonOnly this lesson

The rule

sin(arcsin x) =x for x in [−1,1] (undefined for other x); arcsin(sinx)=x for x in [−π2,π2], and for any other x it is the angle in [−π2,π2] with the same sine.

cos(arccos x) =x for x in [−1,1] (undefined for other x); arccos(cosx)=x for x in [0,π], and for any other x it is the angle in [0,π] with the same cosine.

How

  1. Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−π2, π2] with that sine'.
  2. Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−π2, π2] for arcsin, [0, π] for arccos, (−π2, π2) for arctan.
  3. If the test passes, the two undo each other, and the answer is the number or angle you started with.
  4. If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
  5. If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan(π2) does not, so arctan(tan(π2)) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
  6. Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.

Worked example

Worked example

An angle outside the range: arcsin(sin(5π6))

Find the exact value of arcsin(sin(5π6)).

Show the steps and the answer
x = cos θy = sin θ5π/6
The point for 5π6 is (−32, 12): height 12, on the left half, where arcsin never answers.
x = cos θy = sin θπ/6
The point for π6 is (32, 12): the same height 12, on the right half, so this is the angle arcsin names.
  1. Say what it asks: take the sine of 5π6, then find the angle in [−π2,π2] whose sine is that number.The inner function acts first. The outside function is arcsin, and arcsin answers only with angles from −π2 to π2.
  2. Test the angle against the range. Give π2 a bottom of 6: π2=3π6. Since 5π6>3π6, the angle 5π6 is outside [−π2,π2].With the same bottom, comparing fractions means comparing tops, and 5 > 3. Had the angle passed, the answer would be 5π6 itself; it failed, so arcsin and sine may not be canceled.
  3. Find the inside value. 5π6 is in Quadrant II, its reference angle is π−5π6=6π6−5π6=π6, and sine is positive there, so sin(5π6)=sin(π6)=12.5π6 lies between π2 = 3π6 and π = 6π6, which is Quadrant II. There the point on the unit circle is above the x-axis, so its height, the sine, is positive.
  4. Replace the inside by its value: arcsin(sin(5π6))= arcsin(12).What remains is a plain inverse sine of a special value, the kind of problem the last lesson solved.
  5. Find arcsin(12) with the four-step method: the reference angle is π6, because sin(π6)=12; the input is positive; so the answer is in Quadrant I, the part of the range from 0 to π2; the angle is π6.arcsin answers a positive input with an angle between 0 and π2, and π6 is that angle.
Answer
π6
Double-check Second way, by the mirror: the points for 5π6 and π6 are mirror images across the y-axis, so they have the same height, 12, and π6 is the one on the right half, where arcsin answers. Evaluating the answer confirms it: sin(π6) = 12 = sin(5π6), and −π2 ≤ π6 ≤ π2.

The trap

Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin(5π6)) = 5π6. Before you cancel, test the angle against the range of the outside inverse. 5π6 is past π2 = 3π6, so it fails; work from the inside instead: sin(5π6) = 12, then arcsin(12) = π6.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Inverse outside, an angle in Quadrant II

Find arcsin(sin(2π3)).

Show the steps and the answer
x = cos θy = sin θ2π/3
The point for 2π3 is at height 32 on the left half; its mirror on the right half is the point for π3.
  1. Say what it asks: take the sine of 2π3, then find the angle in [−π2,π2] with that sine.arcsin is on the outside, and arcsin answers only from −π2 to π2.
  2. Test the angle: with a bottom of 6, 2π3=4π6 and π2=3π6. Since 4π6>3π6, the angle is outside the range.The test fails, so arcsin and sine may not be canceled.
  3. Find the inside value: 2π3 is in Quadrant II, its reference angle is π−2π3=3π3−2π3=π3, and sine is positive there, so sin(2π3)=32.2π3 = 4π6 lies between π2 = 3π6 and π = 6π6. In Quadrant II the point is above the x-axis, so its height, the sine, is positive.
  4. Finish: arcsin(32) has reference angle π3 and a positive input, so it is the Quadrant I angle π3.This is the four-step method: a positive input puts the answer between 0 and π2.
Answer
π3
Double-check Second way, by the mirror: the point for 2π3 reflected across the y-axis is the point for π − 2π3 = π3, at the same height, on the right half. And sin(π3) = 32, with π3 inside [−π2, π2].

7 Mixing the functions with a right triangle

about 4 minOpen the full lessonOnly this lesson

The rule

For an expression such as cos(arcsin a): let θ= arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from adj2+ opp2= hyp2; then read sinθ=opphyp,cosθ=adjhyp or tanθ=oppadj.

When θ lands on an axis (a=0, or a=1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) =cosπ2=0. For a letter: cos(arcsin x) =1−x2, for −1≤x≤1.

How

  1. Say it in words and name the inside angle: cos(arcsin(35)) is the cosine of θ, where θ = arcsin(35), so sin θ = 35.
  2. Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
  3. Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
  4. Label the two sides the input gives: a sine gives opphyp, a cosine gives adjhyp, a tangent gives oppadj. A leg that points left or down is negative; the hypotenuse is always positive.
  5. Find the third side with adj2 + opp2 = hyp2: take the positive square root, then give a leg the sign of the direction it points.
  6. Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.

Worked example

Worked example

The cosine of the angle whose sine is three fifths

Find the exact value of cos(arcsin(35)).

Show the steps and the answer
xyθx = 4y = 3rP(4, 3)Ox = 4 (4 right) y = 3 (3 up) r = 5the ray from O through P (and beyond) = the terminal side
θ = arcsin(35) drawn in Quadrant I: up 3, slanted side 5, so the across leg is 4 and cos θ = 45.
  1. Say what it asks: the cosine of the angle whose sine is 35. Name that angle θ= arcsin(35), so sinθ=35 and −π2≤θ≤π2.This is the definition of the inverse sine: arcsin(35) is the one angle in [−π2, π2] whose sine is 35, its principal value. Naming it splits one tangled question into two small ones: what does θ look like, and what is cos θ.
  2. Pick the quadrant: the input 35 is positive, so θ is between 0 and π2, in Quadrant I.The inverse sine answers only in the right half of the circle, and there the sine is positive only above the x-axis. Quadrant II also has positive sines, but arcsin never answers past π2.
  3. Label two sides: sinθ=opphyp=35, so the opposite leg is 3 and the hypotenuse is 5.SOH: sine is opposite over hypotenuse, so the input hands you those two sides directly.
  4. Find the adjacent leg: adj2+32=52, so adj2+9=25,adj2=16, and adj =4. Plug back: 42+32=16+9=25=52.This finds the one missing side. The Pythagorean theorem says the legs squared add to the hypotenuse squared; subtracting 9 from both sides leaves adj2 alone; 4 × 4 = 16. Take the positive root because in Quadrant I the adjacent leg points right.
  5. Read the outside function: cosθ=adjhyp=45.CAH: cosine is adjacent over hypotenuse.
  6. Check the sign: θ is in Quadrant I, where all three functions are positive, so 45 keeps its plus sign.All Silver Tea Cups: in Quadrant I, All are positive.
Answer
cos(arcsin(35)) = 45
Double-check A second way, with no triangle: every angle has sin2θ + cos2θ = 1, because the point (cos θ, sin θ) sits on the unit circle x2 + y2 = 1. So cos2θ = 1 − (35)2 = 1 − 925 = 1625, and cos θ is 45 or −45. θ is in Quadrant I, where cosine is positive, so cos θ = 45, the same answer. Going back, the triangle 3, 4, 5 gives sin θ = 35, the input.

The trap

Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: 125 instead of −125 for tan(arccos(−513)). Decide the quadrant before you draw anything.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A negative input to the inverse cosine

Find the exact value of tan(arccos(−513)).

Show the steps and the answer
x = cos θy = sin θθ = arccos(−5/13)
The inverse cosine of a negative number lands in Quadrant II, across negative and up positive.
  1. Say what it asks: the tangent of the angle whose cosine is −513. Name it θ= arccos(−513), so cosθ=−513 and 0≤θ≤π.Definition of the inverse cosine.
  2. Pick the quadrant: the input is negative, so θ is between π2 and π, in Quadrant II.The inverse cosine answers in the top half of the circle; a negative cosine there means left of the y-axis. It can never be Quadrant III or IV, because arccos never answers past π or below 0.
  3. Label with signs: cosθ=adjhyp=−513, so the adjacent leg is −5 and the hypotenuse is 13.In Quadrant II the adjacent leg points left, so it carries the minus sign; the hypotenuse stays positive.
  4. Find the opposite leg: (−5)2+ opp2=132, so 25+ opp2=169, opp2=144, and opp =12. Plug back: 25+144=169=132.Subtract 25 from both sides; 12 × 12 = 144. Positive because in Quadrant II the opposite leg points up.
  5. Read the outside: tanθ=oppadj=12−5=−125.TOA; a positive divided by a negative is negative. Dropping the minus sign would give 125, which answers a different question, tan(arccos(513)).
Answer
−125
Double-check Find the sine first, then divide: sin θ = opphyp = 1213, so tan θ = sinθcosθ = 1213 ÷ (−513) = 1213 × (−135) = −125. Sign: in Quadrant II only sine is positive, so the tangent is negative.

8 Inverse values on a calculator, and why one answer is not all the answers

about 7 minOpen the full lessonOnly this lesson

The rule

The sin−1,cos−1 and tan−1 keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin−1 k in [−π2,π2],cos−1 k in [0,π],tan−1 k in (−π2,π2), named in the units the mode is set to.

On [0,2π),sint=k and cost=k have two solutions when −1<k<1, one when k=1 or k=−1, and none when k<−1 or k > 1; tant=k has two for every k. With the reference angle α= the key pressed on |k|, the solutions are the angles among α,π−α,π+α and 2π−α (in degrees α,180°−α,180°+α,360°−α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0,2π) that solves the equation (sint=0 at 0 and π,cost=0 at π2 and 3π2,tant=0 at 0 and π).

How

  1. Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
  2. Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is π2; degree mode shows 90.
  3. Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
  4. Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
  5. Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
  6. Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.

Worked example

Worked example

Solving tan θ = 1.8 on [0°, 360°): the key gives one angle, and the second is 180° later

Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.

Show the steps and the answer
P
Unit circle with P at about 240.9°.
  1. Read the units. The interval [0°,360°) has a degree sign, so set the calculator to degree mode in its mode or setup menu.The inverse keys answer in whatever units the mode is set to. In radian mode tan⁻¹(1.8) would show 1.063697822, which is a radian measure, but the question asks for degrees.
  2. Test the mode with one press: sin−1(1). The screen shows 90.90 is the degree measure of the angle whose sine is 1, so the mode is right. If the screen showed 1.570796327, which is π2, the calculator would still be in radian mode.
  3. Count the solutions before computing. On [0°,360°),tanθ=k has two solutions for every k, so tanθ=1.8 has two, even though 1.8 > 1.Sine and cosine stay between −1 and 1, so sin θ = 1.8 would have no solution. Tangent takes every real value. The key shows only one angle, so the work is not finished when the screen gives its answer.
  4. Press SHIFT (or 2nd) and then tan to get tan−1. Type (1.8) and press enter. The screen shows 60.9453959. Call this angle α.tan⁻¹ is printed above tan as a second function. The x⁻¹ key is a different key: it would give 11.8 ≈ 0.5555555556, which is a reciprocal, not an angle. Because 1.8 is positive, the principal value is also the reference angle, α = tan⁻¹(|k|).
  5. Pick the quadrants. tanθ>0 in Quadrants I and III, so the solutions are θ=α and θ=180°+α.For the point (x, y) on the unit circle, tan θ = yx. This is positive when x and y have the same sign, which happens in Quadrants I and III. Of α, 180° − α, 180° + α and 360° − α, only α and 180° + α lie in those quadrants. The angle 180° − α is in Quadrant II, where tan θ = −1.8.
  6. Right after the α line, type 180+ Ans. The screen shows 240.9453959.Ans holds every digit of α, so no rounding enters from retyping. The key alone can never show this angle, because tan⁻¹ answers only between −90° and 90°. The point at 180° + α is directly opposite the point at α. Its coordinates are (−x, −y), and −y−x = yx = 1.8.
  7. Round only now, to the nearest tenth of a degree: θ≈60.9° and θ≈240.9°.The question asks for tenths. In both unrounded values the hundredths digit is 4, so both round down. Rounding once, at the end, keeps the answers accurate, and ≈ shows that they are rounded.
Answer
θ ≈ 60.9° or θ ≈ 240.9°
Double-check Both answers lie in [0°, 360°): 60.9° is in Quadrant I and 240.9° is in Quadrant III. They differ by exactly 180°, the period of tangent. In degree mode, tan(60.9453959) and tan(240.9453959) each show 1.8. For contrast, the Quadrant II candidate 180° − α gives tan(119.0546041) = −1.8, so it is not a solution. Testing the rounded angles is only approximate: tan 60.9° ≈ 1.7966, a little under 1.8, because tangent climbs steeply near 61°. That is why the check uses the unrounded values.

Work to write

  1. Degree mode: sin⁻¹(1) shows 90
  2. tan θ = k has two solutions on [0°, 360°) for every k
  3. α = tan⁻¹(1.8) ≈ 60.9453959°
  4. tan θ > 0 in Quadrants I and III, so θ = α or θ = 180° + α
  5. 180° + α ≈ 240.9453959°
  6. θ ≈ 60.9° or θ ≈ 240.9°

The trap

The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Two answers for a positive cosine, a different mirror

Solve cos t = 0.3 on [0, 2π). Round each answer to four decimal places.

Show the steps and the answer
x = cos θy = sin θt ≈ 1.2661
Quadrant I: left-right position 0.3.
x = cos θy = sin θt ≈ 5.0171
The mirror image across the x-axis, in Quadrant IV, has the same left-right position 0.3.
  1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose cosine is 0.3.Cosine is the left-right position of the point on the unit circle, and a full turn passes the position 0.3 twice.
  2. Set radian mode and test: sin−1(1) shows 1.570796327. Check that 0.3 is between −1 and 1.The interval uses π, and a cosine between −1 and 1 has angles to find.
  3. Press cos−1(0.3): the screen shows 1.266103673. Call it α.0.3 is positive, so the principal value, which lies in [0, π], is in Quadrant I: it is the reference angle.
  4. Cosine is positive in Quadrants I and IV.The point is right of the vertical axis there (All Silver Tea Cups: Cosine in IV).
  5. Quadrant I: t=α≈1.266103673. Quadrant IV: type 2π−cos−1(0.3), which shows 5.017081634.Mirroring the point across the x-axis keeps its left-right position 0.3, and the mirror stops α short of a full turn: 2π − α. The sine pattern π − α would mirror across the vertical axis and give cosine −0.3.
  6. Round to four decimal places: 1.2661 and 5.0171.In 1.266103673 the fifth decimal digit is 0, so 1.2661 stays. In 5.017081634 the fifth decimal digit is 8, so the 0 before it goes up to 1.
Answer
  • t ≈ 1.2661
  • t ≈ 5.0171
Double-check Press cos(1.2661) and cos(5.0171): both show 0.3000 when rounded to four decimal places. Second way: 1.2661 + 5.0171 = 6.2832 ≈ 2π, as two cosine answers, mirror images across the x-axis, must add to a full turn.

9 Quick checks for the whole unit

7 questions

Quick check 1 of 7

Evaluate arcsin(22) exactly.

Show the steps and the answer
Answer
  • π4
  • Why: sin(π4) = 22, and π4 lies in [−π2, π2].

Quick check 2 of 7

Evaluate arccos(−22) exactly.

Show the steps and the answer
Answer
  • 3π4
  • Why: the reference angle is π4, a negative input sends the inverse cosine into quadrant II, and π − π4 = 3π4; cos(3π4) = −22.

Quick check 3 of 7

Evaluate arctan(−33) exactly.

Show the steps and the answer
Answer
  • −π6
  • Why: tan(π6) = 33, and a negative input gives a negative angle in (−π2, π2); tan(−π6) = −33.

Quick check 4 of 7

Give the value of each, if it has one: sin(arcsin(0.8)) and sin(arcsin(1.8)).

Show the steps and the answer
Answer
  • sin(arcsin(0.8)) = 0.8
  • sin(arcsin(1.8)) has no value
  • Why: 0.8 is in [−1, 1], so the inverse sine finds an angle and the sine undoes it; no angle has a sine of 1.8.

Quick check 5 of 7

Evaluate sin(arctan(512)) exactly.

Show the steps and the answer
Answer
  • 513
  • Why: the angle is in quadrant I with opposite 5 and adjacent 12, so the hypotenuse is 25+144 = 169 = 13, and sine is opposite over hypotenuse.

Quick check 6 of 7

Evaluate cos(arcsin(−1213)) exactly.

Show the steps and the answer
Answer
  • 513
  • Why: the angle is in quadrant IV with opposite −12 and hypotenuse 13, so the adjacent side is 169−144 = 25 = 5, positive because it points right.

Quick check 7 of 7

In radian mode a calculator shows sin−1(0.25) ≈ 0.2527. Find the other solution of sin t = 0.25 in [0, 2π), to four decimal places.

Show the steps and the answer
Answer
  • t ≈ 2.8889
  • Why: sine is positive in quadrants I and II, and the quadrant II angle with the same reference angle is π − 0.2527 ≈ 3.1416 − 0.2527 = 2.8889.