Rates of change and behavior of graphs: crash course
about 27 min to listen10 lessons18 questions to tryUnit 3 of 17
Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.
You need first
1 Rate of change and average rate of change
The rule
Average rate of change , with and both outputs defined.
Use the same endpoint order on top and bottom. Units are output units per input unit.
How
- Name the input and output, including their units.
- For a left-to-right calculation, call the smaller input and the larger input ; keep each output with its input.
- Find Δy = − and Δx = − , using the same order.
- Check Δx ≠ 0, then divide Δy by Δx.
- Attach output units per input unit. With inputs in increasing order, positive means a net rise and negative a net fall.
Worked example
Worked example
Average rate of change of a regional gas price, 2014 to 2021
A regional energy office records the average price of one gallon of regular gasoline each year. Let P(t) be the price in dollars per gallon in year t. The table gives these values.
Year t: 2014, 2016, 2019, 2021
Price P(t) ($/gal): 3.36, 2.14, 2.60, 3.01
(a) Find the average rate of change of the gas price from 2014 to 2021. Give units and say what the sign means.
(b) Find the average rate of change from 2016 to 2021. Explain why the signs in (a) and (b) differ, even though both intervals end in 2021.
Show the steps and the answer
- Input: t, the year, in years. Output: P(t), the price, in dollars per gallon ($gal).The units of the answer are output units per input unit, so both units are needed first.
- (a) Let with , and with .For a left-to-right calculation the smaller input is . Each price stays paired with its own year.
- and .Both differences use the same order, the later value minus the earlier value.
- , so the average rate of change is .Average rate of change = . Division is allowed because Δx is not zero.
- (a) The rate is dollars per gallon per year. The price fell by a net 5 cents per gallon per year from 2014 to 2021.The inputs are in increasing order, so a negative rate means a net fall. The price did not fall every year: it rose from 2016 to 2021. The rate describes only the overall change between the endpoints.
- (b) Let with , and with . Then and .This is the same left-to-right method on the new interval, keeping each price with its year.
- , so the rate is dollars per gallon per year, a net rise of about 17.4 cents per gallon per year.The rate is positive with the inputs in increasing order, so the price rose overall on [2016, 2021].
- The signs differ because the starting prices differ. The 2014 price of $3.36 is above the 2021 price of $3.01. The 2016 price of $2.14 is below it.An average rate of change depends only on the two endpoint values, not on the values in between.
Work to write
- Input t in years; output P(t) in dollars per gallon
- = −0.05 dollars per gallon per year
- Negative: net fall of 5 cents per gallon per year from 2014 to 2021
- (b) = = 0.174 dollars per gallon per year, a net rise
- The signs differ because P(2014) > P(2021) but P(2016) < P(2021)
The trap
Subtracting in different orders on top and bottom flips the sign. Point 2 minus point 1 must be used for both output and input changes.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
Average rate of change of a fuel price from 2015 to 2019
A small delivery company keeps a fuel log of the average price it paid for one gallon of regular gasoline each year. Let P(t) be the price in dollars per gallon in year t. The table gives these values.
Year t: 2015, 2017, 2018, 2019
Price P(t) ($/gal): 2.62, 2.48, 2.71, 3.02
Find the average rate of change of P over the four years from 2015 to 2019. Give units and say what the sign means.
Show the steps and the answer
- Input: t, the year (years). Output: P(t), the price of gasoline (dollars per gallon).The units of the rate of change are output units per input unit, so both must be named first.
- Let with . Let with .For a left-to-right calculation the smaller input is . Each output stays with its own input. The 2017 and 2018 values are not endpoints of the interval, so they are not used.
- dollars per gallon. years.The same endpoint order (2019 first, then 2015) is used on top and bottom, so the signs are consistent.
- , so the average rate of change .The rule is defined only when the inputs differ. Here they do.
- Average rate of change dollars per gallon per year. It is positive.The inputs are in increasing order, so a positive rate means a net rise in price from 2015 to 2019. The dip in 2017 does not change the net result, because only the endpoints enter the calculation.
Work to write
- Input t in years; output P(t) in dollars per gallon
- 0.10 dollars per gallon per year
- Positive: the price rose overall from 2015 to 2019
2 On a graph, the average rate of change is a slope
The rule
For [left end, right end], with a < b and both outputs defined, average rate .
This is the slope of the straight ruler through (a, f(a)) and (b, f(b)).
How
- Locate both interval endpoints on the horizontal axis.
- At each input, move vertically to the solid graph and read its height. Count grid steps; estimate if it lies between lines.
- Subtract right height minus left height, then right input minus left input.
- Divide rise by run and interpret the sign.
Worked example
Worked example
Average rate of change of a parabola from its graph on [−1, 3]
The graph of f(x) = − 1 is drawn on a grid where each square is 1 unit. Read the graph to find the average rate of change of f over [−1, 3]. Say what the sign means.
Show the steps and the answer
- Locate the endpoints on the horizontal axis: on the left and on the right.The interval [a, b] runs from the left end to the right end, so a = −1 and b = 3 with a < b.
- From , move vertically to the graph. It meets the curve on the x-axis, so . The point is .The output is the height of the graph above the input. Here the height lands exactly on a grid line, so no estimate is needed.
- From , move vertically to the graph. Count up 8 grid steps, so . The point is (3, 8).Counting whole grid squares gives the exact height. Check with the formula: − 1 = 8.
- Rise . Run .Use right minus left in both the numerator and the denominator. Subtracting −1 is the same as adding 1.
- Average rate . The sign is positive.The rate is rise divided by run. A positive slope means the ruler through the two points goes up from left to right.
Work to write
- rise = 8 − 0 = 8, run = 3 − (−1) = 4
- average rate = = 2
- Positive: f rises 2 units per unit of x on average over [−1, 3]
The trap
Putting right-minus-left on top and left-minus-right on the bottom reverses the sign. Keep each input paired with its output and use one order twice.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
A straight line has the same average rate on any interval
The graph of the straight line f(x) = −x + 2 is drawn on a grid where each square is 1 unit in both directions. The line passes exactly through the grid points (−4, 4), (0, 2) and (2, 1). Read the graph to find the average rate of change of f over [−4, 2]. Then find it over [0, 2] and compare the two results. Say what the sign means.
Show the steps and the answer
- For , locate (left end) and (right end) on the horizontal axis.The rule uses a = −4 as the left input and b = 2 as the right input, with a < b.
- From , move vertically to the line. It meets the line 4 squares above the axis, so . From , the line is 1 square above the axis, so .The height of the graph at each input is the output we need. Both points sit exactly on gridlines, so no estimate is needed.
- Rise . Run .Subtract right minus left in both the outputs and the inputs, so the signs stay consistent.
- Average rate .The average rate is rise divided by run. This is the slope of the ruler through (−4, 4) and (2, 1).
- For [0, 2], read and . Then rise , run , and the average rate .Use the same steps on a different interval. This tests whether the rate depends on where we measure.
- Compare: both intervals give . The rate is negative, so f decreases. On average, it falls unit for every 1 unit increase in x.A straight line has a single, constant slope. Every ruler through two of its points lies along the line itself, so every interval gives the same average rate.
Work to write
- f(0) = 2, so = = −
- Same rate on both intervals because the graph is a straight line; negative means f is decreasing
3 Average rate of change from a formula
The rule
On [left end, right end], with a < b and both outputs defined, average rate .
Evaluate the two endpoint outputs first, then subtract and divide. Preserve all nonzero-bottom and square-root restrictions.
How
- Check that both inputs are allowed: no bottom may be zero, and a real square root needs a nonnegative inside.
- Evaluate f(a), placing the whole input in parentheses at every variable position.
- Evaluate f(b) the same way.
- Subtract f(b) − f(a). If fractions occur, make their bottoms match first.
- Divide by b − a. Simplify exact fractions and attach units.
Worked example
Worked example
Average rate of change of the electric force as two charges move apart
Two small charged spheres repel each other. The size of the force between them is F(r) = newtons, where r is the distance between the spheres in meters. Find the average rate of change of F on the interval [2, 4]. Give an exact answer with units.
Show the steps and the answer
- Check the inputs. For . For . There is no square root, and 2 < 4.Both endpoint outputs must be defined, and the bottom of a fraction may not be zero.
- Evaluate .Putting the input in parentheses gives the left-end output.
- Evaluate .The right-end output is found the same way and simplified.
- Subtract: .Fractions can be subtracted only after their bottoms match. Here 9 is rewritten as .
- Divide by : N per m.The average rate is the change in output divided by the change in input. Its units are newtons per meter.
Work to write
- r = 2 and r = 4 both give a nonzero bottom
- Average rate = = − N per m
The trap
Stopping after subtracting gives only the output change. Divide by the input change to get the average rate.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
Parentheses for a negative endpoint
This asks for the average output change per input unit, using one negative input. Find the average rate of f(x) = 2 − on [−3, 1].
Show the steps and the answer
- .The whole input is −3. Squaring (−3) gives (−3)(−3) = 9; the outside subtraction stays outside.
- .Evaluate the other endpoint in the same formula.
- Output change: .Subtract the whole starting output; taking away a negative adds its opposite.
- Input change: .The endpoint order must match the output subtraction.
- .Dividing the net change 8 by the span 4 gives the change per input unit.
4 When an endpoint is a letter, the answer is an expression
The rule
For a fixed input 5 and an endpoint a, rate , with and both outputs defined.
On [5, a], a > 5; if a < 5, use the sorted interval [a, 5]. Factor a polynomial numerator before canceling a matching whole factor.
How
- Evaluate the fixed numerical endpoint.
- Substitute the endpoint letter to write the other output.
- Subtract the outputs and write the matching input difference.
- For a polynomial, factor the numerator and verify by multiplying back.
- Cancel only a matching factor multiplying the whole numerator, preserving the original restrictions.
- If the rate is given, set the simplified rate expression equal to that number, solve, and check the endpoint in the original quotient.
Worked example
Worked example
Average rate of change from 5 to a letter endpoint, then solving for the endpoint
Let f(x) = − 2x − 2. (a) Write the average rate of change of f between the inputs 5 and a, where a ≠ 5, as a simplified expression in a. (b) The average rate of change of f between 5 and a equals 7. Find a and state the interval.
Show the steps and the answer
- .The fixed numerical endpoint gives a number, so evaluate it first.
- .Replace every x with the endpoint letter a to get the other output.
- rate , with .The average rate is the change in output over the matching change in input, in the same order. a = 5 would make the denominator zero.
- − 2a − 15 = (a − 5)(a + 3). Check: .Factor the polynomial numerator so that any factor matching the denominator becomes visible. Multiplying back confirms the factoring.
- rate , for .(a − 5) multiplies the whole numerator and equals the denominator, so it cancels. The restriction a ≠ 5 from the original quotient still holds.
- Set , so .The given rate equals the simplified expression, so solve that equation for the endpoint.
- Check in the original quotient: , and . Since 4 < 5, the sorted interval is [4, 5].The endpoint must satisfy a ≠ 5 and give the stated rate in the unsimplified quotient. An interval is written with its smaller endpoint first.
Work to write
- f(5) = 13
- rate = a + 3, a ≠ 5
- a + 3 = 7 ⇒ a = 4
- Check: = 7; interval [4, 5]
The trap
Canceling pieces of sums instead of whole multiplied factors, or forgetting the excluded endpoint after cancellation.
Quick check
Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.
Try it · level 4 of 7
A coefficient and a difference of squares
This asks for a rate expression rather than one rate number. Find the average rate of f(x) = 3 − 5 on [2, b], with b > 2.
Show the steps and the answer
rate = 3b + 6
- ; .Evaluate the fixed input 2 and then substitute the endpoint b.
- .Subtract the whole starting output; −5 − 7 = −12.
- .Both terms contain a factor of 3.
- .Multiplying back gives + 2b − 2b − 4 = − 4.
- , with .The input difference b − 2 is a nonzero factor of the entire top.
- 3b + 6, for b ≠ 2. The stated interval [2, b] uses b > 2
- for b < 2 use [b, 2].
5 The difference quotient: average rate of change from x to x + h
The rule
Difference quotient , with and both outputs defined.
It is the average rate on if h > 0, and on the sorted interval if h < 0.
How
- Plug in: replace every x in the formula by the whole input (x + h); multiply out the needed products.
- Subtract: write −(f(x)) with parentheses, then let that minus reach every term.
- Simplify: combine like terms; for a fully expanded polynomial, the terms independent of h cancel.
- Cancel h: when h multiplies the entire numerator, divide that nonzero factor out; keep every original restriction.
Worked example
Worked example
Difference quotient of a line
This asks for the average rate over any nonzero input step h starting at any input x. Find for g(x) = 6 − 2x. The plan is plug in, subtract, simplify, then cancel h.
Show the steps and the answer
- Require . Write .x + h is one whole input. The −2 must multiply all of it; writing 6 − 2x + h would multiply only x.
- .The distributive property means the multiplier reaches each term: (−2) · x = −2x and (−2) · h = −2h.
- Write the output change as .Subtract the entire starting output, not one selected term.
- , so the output change is .The hidden sign on 6 is +. Multiplying the whole starting expression by −1 changes +6 to −6 and −2x to +2x.
- .The +6 and −6 cancel, and −2x and +2x cancel. The expanded polynomial contains a copy of g(x), removed by subtraction.
- .The nonzero factor h divides by itself to give 1.
- −2, with h ≠ 0.
- For each 1 unit right, g drops 2 output units. This rate holds for both positive and negative signed steps.
The trap
Adding h to the old output, treating f as a multiplier, or allowing a zero input step. Substitute x + h into the whole function formula and keep h ≠ 0.
Quick check
Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 6
Multiplication changes the whole input
This asks for a rate formula for every start and every nonzero step. Find the difference quotient of f(x) = 4x.
Show the steps and the answer
- .The whole new input replaces x, and 4 multiplies each piece.
- Output change: .Subtract the entire original output; +4x and −4x cancel.
- , with .A common nonzero multiplier h divides out.
6 Difference quotient of a quadratic
The rule
xh .
For , the difference quotient is , with . Multiply any outside coefficient into every expanded term, subtract all of f(x), then factor the whole numerator before canceling h.
How
- Plug in: replace every x by (x + h), multiply out the square, and apply each outside multiplier.
- Subtract: keep all of f(x) in parentheses after a minus, then flip every term's sign.
- Simplify: combine matching polynomial terms; the terms independent of h cancel.
- Cancel h: write every remaining term as h times something, factor h from the whole numerator, and cancel only for h ≠ 0.
Worked example
Worked example
Difference quotient for a garden plot with a compost corner
A rectangular garden plot is x meters wide and 2x meters long. A 2 square-meter corner is set aside for a compost bin, so the planted area is A(x) = 2 − 2 square meters. The graph of y = 2 − 2 passes through (2, 6) and (3, 16), and its lowest point is (0, −2). (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result with x = 2 and h = 1 to find the average rate of change of the planted area as the width grows from 2 m to 3 m.
Show the steps and the answer
- (xh ) xh Replace every x by (x + h), expand with (x + h = + 2xh + , and multiply the outside coefficient 2 into every expanded term.
- (xh ) xh Keep all of A(x) in parentheses after the minus, then flip the sign of each of its terms. The −2 becomes +2.
- and , so the numerator is 4xh .Combine matching terms. The terms that do not contain h cancel.
- , for Every remaining term contains h. Factor h from the whole numerator, then cancel it, which is allowed only because h ≠ 0.
- With x = 2 and h = 1: Substitute into the simplified difference quotient. The result is the average rate of change of A on [2, 3].
Work to write
- A(x + h) = 2 + 4xh + 2 − 2
- A(x + h) − A(x) = (2 + 4xh + 2 − 2) − (2 − 2) = 4xh + 2
- x = 2, h = 1: 4(2) + 2(1) = 10 per m
- Check: = 10
The trap
Losing the middle term, squaring an outside coefficient, or forgetting that ÷ h = h. Show the full square expansion before subtracting.
Quick check
Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.
Try it · level 4 of 7
A coefficient, a linear term, and a constant
This asks for the average-rate formula for a quadratic with three terms. Find for f(x) = 3 − 4x + 1.
Show the steps and the answer
- .The new input replaces every x position, including the linear term.
- (xh ) .Multiply out the square first, then let −4 multiply both terms of x + h.
- xh .The coefficient 3 multiplies , 2xh, and separately.
- Output change: (xh ) .The whole original output stays in parentheses until its minus sign is distributed.
- xh .The outside −1 changes +3 to −3, −4x to +4x, and +1 to −1.
- xh .The explicit matching pairs are +3 with −3, −4x with +4x, and +1 with −1.
- 6xh , and . Therefore the output change is .Each remaining term contains the same multiplier h.
- , with .A nonzero h multiplying the whole top cancels with h on the bottom.
7 Difference quotient of a fraction
The rule
For , combine the output difference over , then divide by h to obtain .
Require , and . Other fraction bottoms need their own product as the common bottom.
How
- Plug in: replace every input occurrence, including those below a fraction bar, by the whole new input.
- Subtract: use the product of the original bottoms as a common bottom, multiply each top by its missing factor, and keep the second top grouped.
- Simplify: distribute the outside minus and combine the numerator terms.
- Cancel a valid h factor: multiply by , cancel only a whole nonzero factor, and keep all original restrictions.
Worked example
Worked example
Difference quotient with x in the denominator
This asks for a reusable average-rate formula when the input is in a fraction bottom. Find for f(x) = .
Show the steps and the answer
- Require , and . Write and .The outer division by h and both original function outputs need nonzero denominators.
- The output change is . Use common bottom .The two bottoms are different, so both fractions must be renamed using the same-sized pieces before subtracting.
- .Multiply the first top and bottom by x; since x ≠ 0, this multiplies the value by = 1.
- .Multiply the second top and bottom by x + h; its nonzero condition makes this multiplication by 1.
- Subtract the tops: .The common bottom stays fixed. Keep the whole second top grouped so the minus reaches both pieces.
- .Distribute 2 inside the second top, then distribute the outside minus to +2x and +2h. The +2x and −2x cancel.
- Divide by the input change h: .Dividing by nonzero h is multiplying by its reciprocal, so this multiplication compares the output change with the input step.
- .Multiply tops and bottoms. The whole numerator −2h and denominator both contain the nonzero factor h, which cancels.
The trap
Subtracting bottoms, splitting a denominator sum, or losing the minus on the second numerator. Use a common bottom, subtract the whole second top, then divide by h.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
Difference quotient when the bottom is x + 2
Let f(x) = . Find and simplify the difference quotient . State every restriction on x and h.
Show the steps and the answer
- Plug in: , so the difference quotient is .Every x, including the one inside the bottom x + 2, is replaced by the whole new input x + h.
- Subtract using the common bottom (x + h + 2)(x + 2): .The common bottom is the product of the two original bottoms. Each top is multiplied by the factor its bottom is missing. The second top, 3(x + h + 2), stays grouped so the minus applies to all of it.
- Simplify the top: . The difference is .Distributing the outside minus changes the sign of every term in the second group. The 3x terms cancel and the 6 terms cancel, leaving only −3h.
- Divide by h: .Dividing by h is multiplying by . h is a whole factor of the top, and h ≠ 0, so it cancels. The original restrictions still hold after the cancellation.
- Record the restrictions: , and .h ≠ 0 because we divided by h. The bottom x + 2 cannot be 0, so x ≠ −2. The bottom x + h + 2 cannot be 0, so x + h ≠ −2.
Work to write
8 Increasing, decreasing, and constant
The rule
On an interval, whenever a < b: increasing means f(a) < f(b); decreasing means f(a) > f(b); constant means .
This course reports intervals of behavior with open endpoints. These are comparisons between inputs, not a direction assigned to one point.
How
- Begin at the left of the whole given graph. Read the horizontal-axis label: the input might be x or t.
- Mark turning inputs, flat boundaries, and breaks.
- Mark actual domain ends. A finite end dot gives a finite boundary; arrows or stated continuation can justify infinity.
- Move right within each separate stretch. Name it increasing, decreasing, or constant.
- Write open intervals of inputs. Keep pieces on opposite sides of a break separate.
- Give each requested behavior on its own line. Say 'and' between stretches; ∪ joins the listed stretches piece by piece.
Worked example
Worked example
Reading increasing and decreasing intervals from a downward parabola
The graph shows y = f(x), where f(x) = -(x - 2 + 3. The horizontal axis is labeled x. The graph is a parabola that opens downward. Its highest point (turning point) is at (2, 3). It also passes through (0, -1), (1, 2), (3, 2) and (4, -1). Arrows on both ends show that the graph continues forever to the left and to the right, so the domain is all real numbers. State the open interval(s) on which f is increasing, the open interval(s) on which it is decreasing, and any interval on which it is constant.
Show the steps and the answer
- Start at the far left of the graph and read the horizontal-axis label. It is x, so every interval is written in terms of x-values.Intervals of behavior describe inputs, so we must know which variable is the input.
- Mark the turning input , where the graph changes from rising to falling at (2, 3). There are no flat stretches and no breaks.Behavior can only change at turning inputs, flat boundaries or breaks, so these split the domain into stretches.
- Mark the domain ends. Both ends carry arrows, so the graph continues without end in both directions. The left boundary is and the right boundary is .Arrows show the graph continues, which justifies using infinity instead of a finite endpoint.
- Move right through the stretch from to 2. Here the graph rises. For example, at 0 < 1 we have . This stretch is increasing.Increasing means that whenever a < b on the interval, f(a) < f(b).
- Move right through the stretch from 2 to . Here the graph falls. For example, at 3 < 4 we have . This stretch is decreasing.Decreasing means that whenever a < b on the interval, f(a) > f(b).
- Look for a stretch where the output stays the same. There is none, because the curve never runs level over an interval.Constant requires f(a) = f(b) for all a < b in an interval. A single highest point is not an interval.
- Write each behavior on its own line, using open intervals of x: increasing on , decreasing on , constant on no interval.This course reports intervals with open endpoints. The turning input x = 2 belongs to neither stretch.
Work to write
- Turning input: x = 2 (highest point at (2, 3)); arrows on both ends, so the domain is (-∞, ∞)
- Increasing on (-∞, 2)
- Decreasing on (2, ∞)
- Constant: on no interval
The trap
Writing the intervals in y-values, for example 'increasing from −2 to 5' because the heights run from −2 to 5. Intervals of increase and decrease are always inputs (x-values or t-values), read along the horizontal axis.
Quick check
Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 6
A parabola that stops at two solid end dots
The graph shows y = p(t), where p(t) = (t - 1 - 4, drawn only for -2 ≤ t ≤ 3. The horizontal axis is labeled t. The graph is a parabola that opens upward. It starts at a solid (filled) dot at (-2, 5) and ends at a solid (filled) dot at (3, 0). There are no arrows. Its lowest point (turning point) is at (1, -4). It also passes through (-1, 0), (0, -3) and (2, -3). State the open intervals on which p is increasing, decreasing, and constant.
Show the steps and the answer
- Start at the left end of the graph and read the horizontal axis. It is labeled t, so every interval is an interval of t-values.Intervals of behavior describe inputs, and the input variable here is t, not x.
- Mark the turning input , where the lowest point is. There are no flat pieces and no breaks.Behavior can change only at turning inputs, at the ends of flat pieces, or at breaks.
- Mark the domain ends and . Both are solid end dots and there are no arrows.A finite end dot gives a finite boundary. Without arrows the graph does not continue, so -∞ and ∞ are not used.
- Move right from to . The heights go 5, 0, , so this stretch is decreasing.For a < b in this stretch, p(a) > p(b). For example, p(-1) = 0 > p(0) = -3.
- Move right from to . The heights go , 0, so this stretch is increasing.For a < b in this stretch, p(a) < p(b). For example, p(2) = -3 < p(3) = 0.
- Write each stretch as an open interval of t: decreasing on and increasing on (1, 3). No stretch is constant.This course reports intervals of behavior with open endpoints, even when the end dots are solid. No two inputs in any stretch give equal outputs, so p is never constant.
- Increasing: (1, 3)
- Decreasing: (-2, 1)
- Constant: none
Work to write
- Input variable: t
- Turning input: t = 1; domain ends: t = -2 and t = 3 (solid dots, no arrows)
- Increasing on (1, 3)
- Decreasing on (-2, 1)
- Constant: none
9 Local maxima and minima
The rule
A local maximum at input b has for every x in some open interval around b contained in the domain.
A local minimum has there. Its value is f(b); its location is b; its point is (b, f(b)). Equal nearby heights are allowed by these nonstrict inequalities. A strict local extremum uses > or < for every nearby .
How
- Scan the given graph for changes from rising to falling or falling to rising.
- Rising then falling identifies an isolated local maximum; falling then rising identifies an isolated local minimum.
- Also inspect flat stretches and shoulders when applying the formal nonstrict rule. Compare both sides, including any equal heights.
- Require a domain neighborhood on both sides. An end of the graph is considered separately for absolute extrema.
- Read the horizontal input as the location and the vertical output as the value.
- Give value and location in a full sentence; give the ordered pair if the question asks for the point.
Worked example
Worked example
Reading a local maximum from a downward-opening parabola
The graph shows f(x) = -(x - 2 + 5, defined for all real numbers. Points read from the graph are (0, 1), (1, 4), (2, 5), (3, 4) and (4, 1). The curve keeps falling to the left of (0, 1) and to the right of (4, 1). Find every local maximum and local minimum of f. Give each value and location in a sentence, and give the point.
Show the steps and the answer
- Scan the graph from left to right. Through (0, 1) and (1, 4) up to (2, 5) the heights increase: 1, 4, 5. After they decrease: 5, 4, 1.A local extremum shows up where the graph changes from rising to falling or from falling to rising.
- The graph rises and then falls at , so is an isolated local maximum. Nowhere does the graph fall and then rise, so there is no isolated local minimum.Rising then falling marks a local maximum. Falling then rising would mark a local minimum.
- Check for flat stretches or shoulders. There are none. The curve is never level over an interval, and the points on each side of are lower: and . In general for every .The nonstrict rule asks us to compare both sides, including equal heights. Here every nearby height is strictly smaller, so the maximum is strict.
- Confirm the domain. f is defined for all real numbers, so an open interval such as (1, 3) lies around inside the domain. The graph has no endpoints.A local extremum needs domain values on both sides. Ends of a graph are considered separately, for absolute extrema.
- Read the coordinates of the turning point. The horizontal input is 2, which is the location. The vertical output is , which is the value.The location of an extremum is its input b, its value is f(b), and its point is (b, f(b)).
- State the result: f has a local maximum value of 5 at , at the point (2, 5). f has no local minimum.The answer must give the value and the location in a full sentence, plus the ordered pair the question asks for.
Work to write
- The graph rises up to x = 2 and falls after it.
- f(x) ≤ f(2) = 5 for every x in the open interval (1, 3).
- Local maximum value 5 at x = 2, point (2, 5).
- There is no local minimum.
The trap
Saying 'the maximum is x = 1'. The maximum is the output, 2; x = 1 is where it happens. On the exam write both: 'local maximum of 2 at x = 1'.
Quick check
Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 5
Reading a local maximum from a downward parabola with its vertex left of the y-axis
The graph shows h(x) = −(x + 1 + 3, defined for all real numbers. Points read from the graph are (−3, −1), (−2, 2), (−1, 3), (0, 2) and (1, −1). The curve keeps falling to the left of (−3, −1) and to the right of (1, −1). Find every local maximum and every local minimum of h. For each local maximum, state its value and its location, and give the point.
Show the steps and the answer
- Scan the listed points from left to right: , 2, 3, 2, . The heights rise from to and fall from to .A local extremum shows up where the graph changes direction, so the first job is to find where rising turns into falling or falling turns into rising.
- The only change of direction is at , where the graph goes from rising to falling. This marks a local maximum at .Rising then falling identifies an isolated local maximum.
- Look for flat stretches or shoulders. There are none: the heights on the left of (for example ) and on the right (for example ) are both below 3, and the curve keeps falling beyond the listed points.The nonstrict rule h(b) ≥ h(x) must be checked on both sides of b, and any equal nearby heights would also need attention.
- Confirm with the formula: for every x, because . Equality holds only at , so the open interval works, and the maximum is strict.The formal definition needs h(b) ≥ h(x) for all x in some open interval around b. It is strict when the inequality is > for every nearby x ≠ b.
- Check for a local minimum. The graph never changes from falling to rising, and the domain is all real numbers, so there are no endpoints to consider. h has no local minimum.A local minimum needs falling then rising, with domain on both sides of the point. There is no such place.
- Read the location from the horizontal axis, , and the value from the vertical axis, . The point is .The location is the input b, the value is the output h(b), and the point is (b, h(b)).
Work to write
- The graph rises up to x = −1 and falls after x = −1.
- h(x) = −(x + 1 + 3 ≤ 3 = h(−1) for all x, so h(−1) ≥ h(x) on an open interval around −1.
- h has a local maximum value of 3 at x = −1.
- The point is (−1, 3).
- h has no local minimum.
10 Toolkit behavior, then absolute maximum and minimum
The rule
The absolute maximum is f(c) when c is in the domain and for every domain input x.
The absolute minimum is f(d) when d is in the domain and for every domain input x. The value must be attained, meaning reached at an accepted input.
How
- Review the nine toolkit shapes and their domain restrictions before using the summary table.
- Look at the whole stated domain, including included endpoint dots and any arrows or stated continuation.
- If outputs rise without bound, there is no absolute maximum; if they fall without bound, there is no absolute minimum.
- A height approached but never reached is not an absolute extremum. Check excluded hollow dots and unattained levels.
- Compare the remaining reached heights with every domain piece. Find the greatest and least reached outputs and every input producing each.
- Answer with the value and location on separate lines. A viewing-window edge does not establish a domain endpoint.
Worked example
Worked example
Showing that a highest point exists
Find the absolute maximum and absolute minimum of f(x) = 4 − on its whole real-number domain, if they exist.
Show the steps and the answer
- for every real input x.Positive and negative numbers have positive squares, and = 0.
- Thus for every input.Subtracting a nonnegative number leaves 4 or less.
- .Input 0 is accepted and is the only input making the square zero.
- The absolute maximum is 4 at .No output is greater and this value is attained.
- and ,996; larger input sizes make the output fall without bound. grows without bound and is subtracted from 4.
- There is no absolute minimum.Every candidate low height is eventually beaten by subtracting a still larger square.
- Absolute maximum: 4 at x = 0.
- Absolute minimum: none.
The trap
Calling the highest point visible in a picture the absolute maximum when an arrow shows the graph keeps rising beyond the window. Check how the graph behaves at its ends before you name an absolute maximum or minimum.
Quick check
Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.
Try it · level 3 of 6
Absolute extrema of a parabola on a closed interval with a tied maximum
The function f(x) = (x - 2 - 1 is defined only on the domain -1 ≤ x ≤ 5. Its graph is an upward-opening parabola with vertex (2, -1). Both ends are included. There is a closed (filled) dot at (-1, 8) and a closed (filled) dot at (5, 8). Find the absolute maximum and the absolute minimum of f, if they exist. Give each value and every input where it occurs.
Show the steps and the answer
- Identify the toolkit shape. is the squaring function shifted right 2 and down 1. It opens upward and its vertex is .The squaring toolkit function has a lowest point at its vertex and rises on both sides. A shift moves the vertex but does not change that behavior.
- Read the whole stated domain: . Both endpoints use , so and are accepted inputs. The graph has no arrows.The domain is fixed by the problem statement. It is not set by any viewing window. Included ends shown with filled dots are candidates for extrema.
- Check for unbounded behavior. The domain is a closed, bounded interval, so the outputs cannot rise or fall without bound.Unbounded outputs would rule out an extremum. Here the graph stops at two filled dots.
- Check for heights that are approached but never reached. There are no hollow dots, and every height on the curve from to is reached.Only attained values can be absolute extrema. With both ends closed, no endpoint height is excluded.
- List the candidates. The interior vertex is at , with . The left end is at , with . The right end is at , with .On a closed interval, an absolute extremum of this parabola can occur only at the vertex or at an included endpoint.
- Compare the reached heights: , 8 and 8. The greatest is 8, reached at both and . The least is , reached only at .The absolute maximum must be at least as large as every output, and the absolute minimum must be at most as small as every output. Every input that produces the extreme value must be reported.
- Absolute maximum: 8, at x = -1 and x = 5.
- Absolute minimum: -1, at x = 2.
Work to write
- f(2) = -1 (vertex, interior)
- f(-1) = 8 (included left end)
- f(5) = 8 (included right end)
- Absolute maximum: 8
- occurs at x = -1 and x = 5
- Absolute minimum: -1
- occurs at x = 2
11 Quick checks for the whole unit
Quick check 1 of 8
Find the average rates: (a) f(x) = 2x + 5 from 1 to 5; (b) g(x) = from 1 to 3.
Show the steps and the answer
- (a) = = 2. The line rises 2 per step: f(0) = 5 and f(1) = 7.
- (b) = = 4, because the endpoint output change is 8 and the input change is 2.
Quick check 2 of 8
From this graph of f(x) = − + 3x, read the local maximum value and the input where it occurs.
Show the steps and the answer
Quick check 3 of 8
Find the difference quotient of f(x) = 5x − 2 for h ≠ 0.
Show the steps and the answer
Quick check 4 of 8
Let f(x) = 3 − 5x + 2. Find and simplify the difference quotient , where h ≠ 0.
Show the steps and the answer
Quick check 5 of 8
A car is at mile marker 30 at 1:00 p.m. and mile marker 150 at 3:00 p.m. the same day. What is the average rate of change of its marker number?
Show the steps and the answer
Quick check 6 of 8
A college account drops from $20,000 to $8,000 over 3 quarters. A quarter here is a three-month time period. Find its average rate of change.
Show the steps and the answer
Quick check 7 of 8
On which interval is f(x) = |x| decreasing?
Show the steps and the answer
Quick check 8 of 8
Let f(x) = |x − 1| + 2 with domain −3 ≤ x < 4 (x = −3 included, x = 4 excluded). Find the absolute maximum and absolute minimum of f, if they exist, and every input where each occurs.
Show the steps and the answer
- Absolute maximum: 6 at x = −3, since f(−3) = 6 and the height 5 near x = 4 is never reached.
- Absolute minimum: 2 at x = 1, the vertex.