Quarry School

College Algebra overview

Read the units in order. Open rules, recipes and traps from their lessons.

Functions and function notation

  1. A function gives one answer to each input
  2. Read function notation as an instruction
  3. Evaluate a formula
  4. The difference quotient: average rate of change
  5. Solve when the output is given
  6. Turn an equation into a function when possible
  7. Evaluate and solve from tables and graphs
  8. One-to-one means each output identifies one input
  9. Vertical and horizontal lines answer different questions
  10. Meet the nine toolkit functions

The unit at a glance

Rules
A function gives one answer to each input

A relation is a set of ordered pairs (input, output). It is a function when every input in its domain has exactly one output. The range is the set of outputs it produces.

Read function notation as an instruction

y = f(x): f is the function name, x is the input, and y or f(x) is the output. Evaluate means find an output. Solve means find the input or inputs producing a specified output.

Evaluate a formula

To evaluate a formula, replace every input variable with the whole stated input in parentheses, then calculate or expand. The value or expression you obtain is the output.

The difference quotient: average rate of change

Difference quotient: f(x+h)−f(x)h, with h ≠ 0 and both inputs in the domain. Read it: f of x plus h, minus f of x, all over h. The starting input can also be named a: f(a+h)−f(a)h.

Solve when the output is given

To solve f(x) = k, set the function's formula equal to k and find every allowed input x.
Zero product rule: AB = 0 means A = 0 or B = 0, or both.

Turn an equation into a function when possible

Choose the input and output. An explicit rule gives the output alone in terms of the input.
An implicit rule keeps them mixed in an equation. Function status requires exactly one output for each allowed input.

Evaluate and solve from tables and graphs

Evaluate g(3): input 3 is given; read its output. Solve g(n) = 6: output 6 is given; find every input paired with it. A point (x, y) on a function graph means y = f(x).

One-to-one means each output identifies one input

A one-to-one function gives different outputs to different inputs. Equivalently, each value in its range comes from exactly one input. Check function status first, then check for shared outputs.

Vertical and horizontal lines answer different questions

Vertical line test: a graph represents a function exactly when every vertical line meets it at most once. Horizontal line test: a function is one-to-one exactly when every horizontal line meets its graph at most once.

Meet the nine toolkit functions

Toolkit functions: constant c, identity x, absolute value |x|, quadratic x2, cubic x3, reciprocal 1x, reciprocal squared 1x2, square root x, and cube root x3. For each, connect formula, graph, domain, range, and a sample table.

Recipes
A function gives one answer to each input
  1. Name what you are starting with; that quantity is the input.
  2. Name what you want to find; that quantity is the output.
  3. Inspect every input and its assigned outputs.
  4. Accept shared outputs. Reject an input with two different outputs.
  5. List distinct inputs as the domain and distinct outputs as the range.
Read function notation as an instruction
  1. Identify the function name and what its input and output represent.
  2. Read everything inside the parentheses as the entire input.
  3. For evaluate, apply the rule to that input.
  4. For solve, require the rule's output to equal the given value.
  5. Include units when the quantities have units.
Evaluate a formula
  1. Say what the question asks. Evaluate f(2) means the input is 2; find its output. It does not ask which input produces 2.
  2. Copy the formula, replacing every input letter with the given input in parentheses.
  3. For a number, do powers first, then multiplication, then addition and subtraction. For an expression, multiply out parentheses before collecting like terms.
  4. Check by putting a numerical input into both the starting recipe and the expanded expression. Matching results can catch an expansion error.
The difference quotient: average rate of change
  1. Write f(x + h) by replacing every x with the whole (x + h). Also write f(x) separately.
  2. Multiply out. A square has the middle term: (x + h)2 = x2 + 2xh + h2. A number in front multiplies every piece.
  3. Subtract f(x) in parentheses, then reverse every sign in that subtracted group.
  4. In these polynomial examples, every term without h must cancel. If one remains, recheck the expansion, copied terms, and subtraction signs.
  5. Factor h from the entire numerator, or divide every numerator term by h. Cancel only the shared nonzero factor.
  6. Write the simplified answer and h ≠ 0. Both starting and ending inputs must still be allowed. Check with chosen numbers.
Solve when the output is given
  1. Say the question in words. Solve h(p) = 3 means the output is 3; find every input p that produces it.
  2. Replace the function notation with its formula, keeping the requested output on the other side.
  3. For a linear equation, undo addition or subtraction and then undo multiplication or division, doing each operation to both sides.
  4. For a quadratic that factors, subtract the requested output from both sides so one side is zero.
  5. Rewrite the quadratic as a product of factors. Set each factor equal to zero using the zero product rule.
  6. Solve each smaller equation and keep every permitted input.
  7. Substitute each answer into the original function. Each checked output must equal the requested output.
Turn an equation into a function when possible
  1. Name the input letter and the requested output letter.
  2. Undo addition or subtraction around the output, doing the same operation to both sides.
  3. Divide every remaining term by the output's nonzero coefficient.
  4. For a cubed output, take its unique real cube root. For a squared output, keep both signs and test an input where they differ.
  5. Write the output alone as f(input) when possible, and check a pair in the equation you started with.
  6. If the equation stays mixed, remember that an awkward formula alone does not disprove a function.
Evaluate and solve from tables and graphs
  1. Translate the question into either given input, find output, or given output, find inputs.
  2. In a table, stay in the same column when moving between its input and output rows.
  3. On a graph, locate the given input on the horizontal axis or the given output on the vertical axis.
  4. For evaluation, move vertically to the graph and read the height. For solving, search across the given height and read every horizontal position.
  5. Check each answer against its original column or point. Do not invent values between isolated data points.
One-to-one means each output identifies one input
  1. State the domain and the direction of the rule.
  2. Confirm that each input has one output.
  3. Search for two different inputs with the same output. One such pair proves the function is not one-to-one.
  4. If claiming one-to-one, explain why every output the function actually produces recovers exactly one allowed input. A few sample pairs alone do not prove it for an infinite domain.
Vertical and horizontal lines answer different questions
  1. Identify the input on the horizontal axis and the output on the vertical axis.
  2. Try vertical lines across the graph. One line meeting two distinct graph points proves it is not a function.
  3. If every vertical line meets at most once, the graph is a function. Some lines may miss the graph.
  4. For a function, try horizontal lines. One line meeting two distinct points proves it is not one-to-one.
  5. Passing every horizontal line proves one-to-one. State which test supports each conclusion.
Meet the nine toolkit functions
  1. Identify the operation in the formula and match its familiar graph shape.
  2. Check which real inputs the operation accepts. These make its domain.
  3. Ask which outputs it can actually produce. These make its range.
  4. Evaluate one small input with parentheses, then check the result against the graph or sample table.
  5. When an output is given, reverse the operation and check every candidate against the domain.
Traps
A function gives one answer to each input

Checking for repeated outputs instead of conflicting inputs. Two arrows arriving together are allowed; two arrows leaving one input for different answers are not.

Read function notation as an instruction

Reading f(x) as f times x. A function name identifies a rule rather than a number being multiplied.

Evaluate a formula

Losing the middle term when squaring a sum. Write (a + h)(a + h) and keep all four products before combining the two ah terms.

The difference quotient: average rate of change

Subtracting only the first term of the starting output. Keep −(f(x)) as one group, then change every sign inside.

Solve when the output is given

Treating a requested output as an input. In h(p) = 3, set the formula equal to 3; do not evaluate h(3).

Turn an equation into a function when possible

Discarding the negative square-root solution when the original equation permits it. A root expression chooses one branch; a squared equation may include both.

Evaluate and solve from tables and graphs

Reading only the first matching output when solving. Scan the whole table or the whole horizontal level of the graph before writing the solution set.

One-to-one means each output identifies one input

Calling a function one-to-one after checking only that each input has one output. Also check that no two different inputs share an output, and state the domain.

Vertical and horizontal lines answer different questions

Using the horizontal line test to decide function status. Check vertical first, then horizontal, and label the conclusion from each test.

Meet the nine toolkit functions

Memorizing a graph shape without checking its input and output restrictions. The square and square-root functions both stay at nonnegative heights, but only the square root excludes negative inputs.

Domain and range

  1. Domain and range: what can go in and what can come out
  2. Find the domain by checking the arithmetic
  3. Factor a denominator and keep every original exclusion
  4. Write the same set three ways
  5. Read domain and range as shadows of a graph
  6. The first five toolkit functions
  7. Reciprocals and roots complete the toolkit
  8. Use toolkit behavior to find a changed function's range
  9. Write and evaluate a piecewise function
  10. Graph each piece only where its condition allows it

The unit at a glance

Rules
Domain and range: what can go in and what can come out

Domain = all permitted inputs.
Range = all outputs actually reached by those inputs; a function assigns one output to each input.

Find the domain by checking the arithmetic

Every denominator must be nonzero; every even-root radicand must be ≥ 0.
Keep inputs satisfying all restrictions, plus any supplied domain or contextual conditions.

Factor a denominator and keep every original exclusion

(x + p)(x + q) = x2 + (p + q)x + pq. To factor x2 + Bx + C, find p + q = B and pq = C.
Exclude every input making the original denominator zero, and retain those exclusions after cancellation.

Write the same set three ways

Use [ or ] for an included endpoint, ( or ) for an excluded endpoint or infinity.
Write intervals from smaller to larger; union (∪) means or, including membership in both sets.

Read domain and range as shadows of a graph

Domain = the graph's horizontal shadow on the x-axis.
Range = its vertical shadow on the y-axis; include a coordinate if any included point reaches it.

The first five toolkit functions

For the toolkit formulas c, x, |x|, x2, and x3, the domain is (−∞, ∞).
Their ranges are {c}, (−∞, ∞), [0, ∞), [0, ∞), and (−∞, ∞), respectively.

Reciprocals and roots complete the toolkit

For 1x: x ≠ 0 and y ≠ 0. For 1x2: x ≠ 0 and y > 0.
For x: x ≥ 0 and y ≥ 0. For x3: x and y may be any real numbers.

Use toolkit behavior to find a changed function's range

Find the domain from the inside arithmetic. Find the range from the final output, and show every claimed output is attained.
A function continuous on the whole real line, with arbitrarily negative and positive outputs, has range (−∞, ∞).

Write and evaluate a piecewise function

Choose the condition your input satisfies, then use that piece's formula.
The whole domain is the union of the pieces' domains; each allowed input must receive one output.

Graph each piece only where its condition allows it

Draw each branch only on its assigned interval, using open dots for strict boundaries and closed dots for included ones.
Combine the pieces; domain is the input union and range is the union of reached output heights.

Recipes
Domain and range: what can go in and what can come out
  1. 1. Decide what the input represents and what the output represents.
  2. 2. For listed ordered pairs or a table, collect the inputs for the domain and the outputs for the range.
  3. 3. Remove repeated entries because sets record membership, not frequency.
  4. 4. If a context is given, keep only physically meaningful inputs. Do not fill the spaces between separate listed values.
Find the domain by checking the arithmetic
  1. 1. Start with all real inputs unless a domain or context is supplied.
  2. 2. Find every denominator. Set the whole denominator equal to zero to locate exactly the inputs where division would fail. Solve that equation, substitute each answer into the original denominator to confirm zero, and exclude those inputs.
  3. 3. Find every even-root radicand, require it to be ≥ 0, and solve the inequality.
  4. 4. If a root is part of a denominator, check the whole denominator as well as the radicand.
  5. 5. Keep only inputs that meet every condition. Write intervals from smaller to larger endpoints.
  6. 6. Substitute each boundary or excluded value to see which operation permits or rejects it.
Factor a denominator and keep every original exclusion
  1. 1. Copy the original denominator before changing the fraction. Its zero inputs are the values you must exclude.
  2. 2. For x2 + Bx + C, identify B and C, including their signs. B is the coefficient of x, meaning the number multiplying x; C is the constant term. The constant term is the fixed number added or subtracted without being multiplied by x; here it is C.
  3. 3. Generate the whole-number factor-pair sizes of the size of C. Try positive whole-number candidates in order and divide the size of C by each one. Keep a pair only when the quotient is a whole number. Stop when the candidate is larger than its quotient, because further pairs would repeat earlier pairs in reverse. Choose signs so the product is C, then find the pair whose sum is B. If C = 0, factor out x directly instead of making a nonzero-constant pair list.
  4. 4. Write (x + p)(x + q) and multiply it out to check both middle and constant terms.
  5. 5. Set each denominator factor equal to zero to find forbidden inputs. Solve each smaller equation, then substitute each result into the original denominator to confirm that it produces zero.
  6. 6. If a common factor cancels, write the simplified expression together with every original exclusion. Cancel only at inputs where the common factor is nonzero.
  7. 7. Keep any other root or context restrictions as well, then write the remaining input intervals.
Write the same set three ways
  1. 1. Identify the shaded or allowed portion of the number line.
  2. 2. Use the closed dot / open dot convention: a filled dot is included and a hollow dot is excluded.
  3. 3. State comparisons with <, >, ≤ or ≥ for inequality notation.
  4. 4. Put the condition after the bar in {x | condition} for set-builder notation.
  5. 5. Write the lower limit first and the upper limit second in interval notation.
  6. 6. For separate pieces, join conditions with or and intervals with ∪. Keep every gap that is actually excluded.
Read domain and range as shadows of a graph
  1. 1. Identify the x-axis as the input axis and the y-axis as the output axis; read their units.
  2. 2. Sweep left to right and collect all input positions covered by included graph points.
  3. 3. Sweep bottom to top and collect all reached output heights.
  4. 4. Check boundary dots. A hollow point excludes only that point, so look for other points sharing its coordinate.
  5. 5. Follow arrows beyond the visible window, and preserve genuine gaps with unions.
  6. 6. Write each interval from smaller to larger and label estimates from a data graph as approximate.
The first five toolkit functions
  1. 1. Name the toolkit formula and say what its calculation does.
  2. 2. Check whether that calculation permits every real input.
  3. 3. Identify outputs the calculation cannot produce, including any sign restriction.
  4. 4. Show that every output in the proposed range has an input that produces it.
  5. 5. Write domain and range separately, and use the graph as a memory cue.
Reciprocals and roots complete the toolkit
  1. 1. Identify whether you are dividing, squaring a denominator, taking a square root, or taking a cube root.
  2. 2. Find the domain by checking denominators and the number under an even root.
  3. 3. Determine the sign and possible zero value of the output.
  4. 4. Supply an input for every proposed allowed output by undoing the calculation.
  5. 5. Write domain and range on separate lines and compare the formula with its toolkit shape.
Use toolkit behavior to find a changed function's range
  1. 1. Identify the toolkit calculation inside the formula and teach yourself what number is actually fed into it.
  2. 2. Apply all denominator and even-root restrictions to find the domain.
  3. 3. Track each operation on the output, including a negative multiplier or an added constant.
  4. 4. Prove the full range by constructing an input for any allowed output, or by using a continuous graph with heights on both sides of every target.
  5. 5. Confirm a few values with substitution or a picture, keeping the proof separate from the sample check.
Write and evaluate a piecewise function
  1. 1. Identify what the input measures and where the rule changes.
  2. 2. Write a formula for each region and state its condition with the boundary ownership explicit.
  3. 3. Include any context limits, such as positive whole-number people counts.
  4. 4. To evaluate, compare the input with all conditions before using a formula.
  5. 5. Substitute into the selected formula and follow the order of operations.
  6. 6. At a boundary, check which condition includes equality. Do not add the outputs of different pieces.
Graph each piece only where its condition allows it
  1. 1. Mark every boundary input on one common x-axis.
  2. 2. Identify each formula's known shape and calculate at least two useful points, or include a turning point for a curve.
  3. 3. Keep only the portion satisfying that branch's condition.
  4. 4. Calculate the boundary height and make its dot open or closed according to that branch's inequality.
  5. 5. Combine all allowed portions without inventing connecting segments across jumps or gaps.
  6. 6. Check the vertical line test at every boundary, then collect the domain and range shadows.
Traps
Domain and range: what can go in and what can come out

Replacing a listed domain {−4, 0, 3, 5} with [−4, 5]. That interval would add every number between the endpoints. A finite list includes only its listed entries.

Find the domain by checking the arithmetic

Changing ≥ 0 to > 0 whenever you see a square root. 0 is allowed. Strict positivity is needed for a square root that must itself be a nonzero denominator, such as 1x−3.

Factor a denominator and keep every original exclusion

Canceling a factor and then forgetting its zero input. The shorter expression equals the original only where the original denominator was nonzero. Record every exclusion before canceling.

Write the same set three ways

Writing [1, ∞) for [1, 3] ∪ (5, ∞). That would fill the missing region after 3 through 5. The union symbol joins sets without filling gaps.

Read domain and range as shadows of a graph

Deleting an output height because one point at that height is hollow. Look across the whole graph. A different included point can still put that height in the range.

The first five toolkit functions

Giving every unrestricted formula an all-real range. An unrestricted domain tells you about inputs. It does not make negative outputs possible for a square or a distance.

Reciprocals and roots complete the toolkit

Treating all roots as square roots, or all reciprocals as positive. An odd root accepts negative inputs. A reciprocal can be negative; reciprocal squared is positive because its denominator is squared.

Use toolkit behavior to find a changed function's range

Listing outputs that seem possible without showing that an input produces them. Excluding zero, or observing a sign, may give a restriction but does not by itself prove the whole range.

Write and evaluate a piecewise function

Using a formula because it is familiar before reading its condition. At g = 2 the data plan uses the g ≥ 2 piece. At g = 0 neither piece applies.

Graph each piece only where its condition allows it

Joining the endpoint (1, 1) to the hollow endpoint (1, 3) with a vertical segment. That segment would create many outputs for x = 1. A jump stays a jump; it is not filled in.

Rates of change and behavior of graphs

  1. Rate of change and average rate of change
  2. On a graph, the average rate of change is a slope
  3. Average rate of change from a formula
  4. When an endpoint is a letter, the answer is an expression
  5. The difference quotient: average rate of change from x to x + h
  6. Difference quotient of a quadratic
  7. Difference quotient of a fraction
  8. Increasing, decreasing, and constant
  9. Local maxima and minima
  10. Toolkit behavior, then absolute maximum and minimum

The unit at a glance

Rules
Rate of change and average rate of change

Average rate of change = ΔyΔx = y2−y1x2−x1 = f(x2)−f(x1)x2−x1, with x2 ≠ x1 and both outputs defined. Use the same endpoint order on top and bottom. Units are output units per input unit.

On a graph, the average rate of change is a slope

For [a, b] = [left end, right end], with a < b and both outputs defined, average rate = f(b)−f(a)b−a. This is the slope of the straight ruler through (a, f(a)) and (b, f(b)).

Average rate of change from a formula

On [a, b] = [left end, right end], with a < b and both outputs defined, average rate = f(b)−f(a)b−a. Evaluate the two endpoint outputs first, then subtract and divide. Preserve all nonzero-bottom and square-root restrictions.

When an endpoint is a letter, the answer is an expression

For a fixed input 5 and an endpoint a, rate = f(a)−f(5)a−5, with a ≠ 5 and both outputs defined. On [5, a], a > 5; if a < 5, use the sorted interval [a, 5]. Factor a polynomial numerator before canceling a matching whole factor.

The difference quotient: average rate of change from x to x + h

Difference quotient = f(x+h)−f(x)h, with h ≠ 0 and both outputs defined. It is the average rate on [x, x + h] if h > 0, and on the sorted interval [x + h, x] if h < 0.

Difference quotient of a quadratic

(x + h)2 = x2 + 2xh + h2. For f(x) = x2, the difference quotient is 2x + h, with h ≠ 0. Multiply any outside coefficient into every expanded term, subtract all of f(x), then factor the whole numerator before canceling h.

Difference quotient of a fraction

For f(x) = 2x, combine the output difference over x(x + h), then divide by h to obtain −2x(x+h). Require h ≠ 0, x ≠ 0, and x + h ≠ 0. Other fraction bottoms need their own product as the common bottom.

Increasing, decreasing, and constant

On an interval, whenever a < b: increasing means f(a) < f(b); decreasing means f(a) > f(b); constant means f(a) = f(b). This course reports intervals of behavior with open endpoints. These are comparisons between inputs, not a direction assigned to one point.

Local maxima and minima

A local maximum at input b has f(b) ≥ f(x) for every x in some open interval around b contained in the domain. A local minimum has f(b) ≤ f(x) there. Its value is f(b); its location is b; its point is (b, f(b)). Equal nearby heights are allowed by these nonstrict inequalities. A strict local extremum uses > or < for every nearby x ≠ b.

Toolkit behavior, then absolute maximum and minimum

The absolute maximum is f(c) when c is in the domain and f(c) ≥ f(x) for every domain input x. The absolute minimum is f(d) when d is in the domain and f(d) ≤ f(x) for every domain input x. The value must be attained, meaning reached at an accepted input.

Recipes
Rate of change and average rate of change
  1. Name the input and output, including their units.
  2. For a left-to-right calculation, call the smaller input x1 and the larger input x2; keep each output with its input.
  3. Find Δy = y2 − y1 and Δx = x2 − x1, using the same order.
  4. Check Δx ≠ 0, then divide Δy by Δx.
  5. Attach output units per input unit. With inputs in increasing order, positive means a net rise and negative a net fall.
On a graph, the average rate of change is a slope
  1. Locate both interval endpoints on the horizontal axis.
  2. At each input, move vertically to the solid graph and read its height. Count grid steps; estimate if it lies between lines.
  3. Subtract right height minus left height, then right input minus left input.
  4. Divide rise by run and interpret the sign.
Average rate of change from a formula
  1. Check that both inputs are allowed: no bottom may be zero, and a real square root needs a nonnegative inside.
  2. Evaluate f(a), placing the whole input in parentheses at every variable position.
  3. Evaluate f(b) the same way.
  4. Subtract f(b) − f(a). If fractions occur, make their bottoms match first.
  5. Divide by b − a. Simplify exact fractions and attach units.
When an endpoint is a letter, the answer is an expression
  1. Evaluate the fixed numerical endpoint.
  2. Substitute the endpoint letter to write the other output.
  3. Subtract the outputs and write the matching input difference.
  4. For a polynomial, factor the numerator and verify by multiplying back.
  5. Cancel only a matching factor multiplying the whole numerator, preserving the original restrictions.
  6. If the rate is given, set the simplified rate expression equal to that number, solve, and check the endpoint in the original quotient.
The difference quotient: average rate of change from x to x + h
  1. 1. Plug in: replace every x in the formula by the whole input (x + h); multiply out the needed products.
  2. 2. Subtract: write −(f(x)) with parentheses, then let that minus reach every term.
  3. 3. Simplify: combine like terms; for a fully expanded polynomial, the terms independent of h cancel.
  4. 4. Cancel h: when h multiplies the entire numerator, divide that nonzero factor out; keep every original restriction.
Difference quotient of a quadratic
  1. 1. Plug in: replace every x by (x + h), multiply out the square, and apply each outside multiplier.
  2. 2. Subtract: keep all of f(x) in parentheses after a minus, then flip every term's sign.
  3. 3. Simplify: combine matching polynomial terms; the terms independent of h cancel.
  4. 4. Cancel h: write every remaining term as h times something, factor h from the whole numerator, and cancel only for h ≠ 0.
Difference quotient of a fraction
  1. 1. Plug in: replace every input occurrence, including those below a fraction bar, by the whole new input.
  2. 2. Subtract: use the product of the original bottoms as a common bottom, multiply each top by its missing factor, and keep the second top grouped.
  3. 3. Simplify: distribute the outside minus and combine the numerator terms.
  4. 4. Cancel a valid h factor: multiply by 1h, cancel only a whole nonzero factor, and keep all original restrictions.
Increasing, decreasing, and constant
  1. Begin at the left of the whole given graph. Read the horizontal-axis label: the input might be x or t.
  2. Mark turning inputs, flat boundaries, and breaks.
  3. Mark actual domain ends. A finite end dot gives a finite boundary; arrows or stated continuation can justify infinity.
  4. Move right within each separate stretch. Name it increasing, decreasing, or constant.
  5. Write open intervals of inputs. Keep pieces on opposite sides of a break separate.
  6. Give each requested behavior on its own line. Say 'and' between stretches; ∪ joins the listed stretches piece by piece.
Local maxima and minima
  1. Scan the given graph for changes from rising to falling or falling to rising.
  2. Rising then falling identifies an isolated local maximum; falling then rising identifies an isolated local minimum.
  3. Also inspect flat stretches and shoulders when applying the formal nonstrict rule. Compare both sides, including any equal heights.
  4. Require a domain neighborhood on both sides. An end of the graph is considered separately for absolute extrema.
  5. Read the horizontal input as the location and the vertical output as the value.
  6. Give value and location in a full sentence; give the ordered pair if the question asks for the point.
Toolkit behavior, then absolute maximum and minimum
  1. Review the nine toolkit shapes and their domain restrictions before using the summary table.
  2. Look at the whole stated domain, including included endpoint dots and any arrows or stated continuation.
  3. If outputs rise without bound, there is no absolute maximum; if they fall without bound, there is no absolute minimum.
  4. A height approached but never reached is not an absolute extremum. Check excluded hollow dots and unattained levels.
  5. Compare the remaining reached heights with every domain piece. Find the greatest and least reached outputs and every input producing each.
  6. Answer with the value and location on separate lines. A viewing-window edge does not establish a domain endpoint.
Traps
Rate of change and average rate of change

Subtracting in different orders on top and bottom flips the sign. Point 2 minus point 1 must be used for both output and input changes.

On a graph, the average rate of change is a slope

Putting right-minus-left on top and left-minus-right on the bottom reverses the sign. Keep each input paired with its output and use one order twice.

Average rate of change from a formula

Stopping after subtracting gives only the output change. Divide by the input change to get the average rate.

When an endpoint is a letter, the answer is an expression

Canceling pieces of sums instead of whole multiplied factors, or forgetting the excluded endpoint after cancellation.

The difference quotient: average rate of change from x to x + h

Adding h to the old output, treating f as a multiplier, or allowing a zero input step. Substitute x + h into the whole function formula and keep h ≠ 0.

Difference quotient of a quadratic

Losing the middle term, squaring an outside coefficient, or forgetting that h2 ÷ h = h. Show the full square expansion before subtracting.

Difference quotient of a fraction

Subtracting bottoms, splitting a denominator sum, or losing the minus on the second numerator. Use a common bottom, subtract the whole second top, then divide by h.

Increasing, decreasing, and constant

Writing the intervals in y-values, for example 'increasing from −2 to 5' because the heights run from −2 to 5. Intervals of increase and decrease are always inputs (x-values or t-values), read along the horizontal axis.

Local maxima and minima

Saying 'the maximum is x = 1'. The maximum is the output, 2; x = 1 is where it happens. On the exam write both: 'local maximum of 2 at x = 1'.

Toolkit behavior, then absolute maximum and minimum

Calling the highest point visible in a picture the absolute maximum when an arrow shows the graph keeps rising beyond the window. Check how the graph behaves at its ends before you name an absolute maximum or minimum.

Composition of functions

  1. Combine two functions with arithmetic
  2. Composition passes one answer into the next function
  3. Order changes the result, and units must fit
  4. Follow a composition through tables
  5. Follow a composition across two graphs
  6. Evaluate formulas one number at a time
  7. Substitute the whole inside expression
  8. A composite domain has two gates
  9. Square roots add boundary checks
  10. Decompose by naming the inside and outside jobs

The unit at a glance

Rules
Combine two functions with arithmetic

(f + g)(x) = f(x) + g(x); (f − g)(x) = f(x) − g(x); (fg)(x) = f(x)·g(x); (fg)(x) = f(x)g(x).
Use inputs allowed by both functions; for the quotient also require g(x) ≠ 0.

Composition passes one answer into the next function

(f ∘ g)(x) = f(g(x)). First apply g, then apply f to g's output.
The product (fg)(x) = f(x)·g(x) is a different operation.

Order changes the result, and units must fit

Usually f(g(x)) ≠ g(f(x)) as functions. Check both orders rather than assuming equality.
For a meaningful composition, the inner output must be an acceptable outer input, including its units.

Follow a composition through tables

To evaluate f(g(a)) from tables, read g(a), then use that output as the input for the f lookup.
A composition is defined only when both lookups exist.

Follow a composition across two graphs

For f(g(a)): read the y-value of g at x = a; use that number as the x-value on f; read f's y-value.
A point (a, b) on g means g(a) = b.

Evaluate formulas one number at a time

For f(h(a)), calculate h(a) first; then substitute that entire numerical answer into every input slot of f.
The input-variable letter does not change the instructions.

Substitute the whole inside expression

To form f(g(x)), replace every input-variable occurrence in f with the whole parenthesized expression g(x).
(a + b)2 = a2 + 2ab + b2, because (a + b)(a + b) has two cross products ab.

A composite domain has two gates

The domain of f ∘ g consists of the x values allowed by g for which g(x) is allowed by f.
Keep original restrictions when simplifying the composite formula.

Square roots add boundary checks

A(x) requires A(x) ≥ 0. A denominator A(x) requires A(x) > 0.
For f(g(x)), apply every root requirement at its own stage and keep both gates.

Decompose by naming the inside and outside jobs

To write h(x) = f(g(x)), choose g as the inside job and f as the job applied to its output.
Check by substitution and preserve h's original domain.

Recipes
Combine two functions with arithmetic
  1. 1. Find the requested operation and its order. g − f means the g answer minus the f answer.
  2. 2. Use the same input in both original functions, because their outputs must refer to the same starting value.
  3. 3. Record where both formulas work and, for division, where the bottom output is nonzero.
  4. 4. Put each whole expression in parentheses before combining it. Simplify while keeping every original domain restriction.
  5. 5. Check one permitted input directly in the original functions.
Composition passes one answer into the next function
  1. 1. Rewrite the circle notation as nested parentheses, meaning one pair of parentheses inside another: (f ∘ g)(x) = f(g(x)).
  2. 2. Name the inner function, which touches the original input.
  3. 3. Evaluate that function and write its output as a separate intermediate, or in-between, answer.
  4. 4. Put that whole intermediate answer into the outer function.
  5. 5. Check the path: original input, inner output, final output.
Order changes the result, and units must fit
  1. 1. For each order, identify the function nearest the original input.
  2. 2. Evaluate or substitute that inner function into the other function.
  3. 3. Compare the resulting formulas and their domains. A different answer at one allowed input proves the functions differ.
  4. 4. For an application, label the starting input, intermediate output, and final output with units.
  5. 5. Check that the intermediate unit matches the outer function's expected input unit.
Follow a composition through tables
  1. 1. Read the nested notation and choose the inner table.
  2. 2. Find the column labeled with the original input in that table.
  3. 3. Read its output and write it as the intermediate value.
  4. 4. Find that value among the input labels of the outer table, which may be a different column.
  5. 5. Read the outer output. If either required input is absent from a complete table, the composition is undefined there.
Follow a composition across two graphs
  1. 1. Choose the inner graph from the function nearest the starting input.
  2. 2. Locate that input on the inner graph's x-axis and move vertically to its curve.
  3. 3. Read the curve's y-coordinate as the intermediate output.
  4. 4. Locate that number on the outer graph's x-axis and move vertically to its curve.
  5. 5. Read the outer y-coordinate as the final answer. Check each graph's own scale.
Evaluate formulas one number at a time
  1. 1. Expand circle notation into parentheses if needed.
  2. 2. Copy the inner formula and replace every input letter with the original number, using parentheses for negative numbers.
  3. 3. Complete that arithmetic and write the intermediate output.
  4. 4. Copy the outer formula and replace every input letter with that output.
  5. 5. Complete the arithmetic and check by substituting into a combined formula.
Substitute the whole inside expression
  1. 1. Copy the outer formula and identify every input slot.
  2. 2. Write the complete inner formula in parentheses in every slot.
  3. 3. Keep powers outside those parentheses so they act on the entire input.
  4. 4. Expand with distribution. For a square, multiply the two identical parentheses and keep both cross products.
  5. 5. Combine like terms, preserve any domain restrictions, and check a small allowed input by the two-stage route.
A composite domain has two gates
  1. 1. Find the inner domain. Record inputs making an inner denominator zero or violating any other inner requirement.
  2. 2. Find what the outer function cannot accept. For an outer denominator, determine its forbidden input values.
  3. 3. Set g(x) equal to each forbidden outer input and solve. Exclude the solutions that are in the inner domain.
  4. 4. Keep only starting inputs passing both gates. For roots, use inequalities rather than only equations, as the next lesson explains.
  5. 5. Write the result in interval notation and check a permitted input and each excluded input using the original stages.
Square roots add boundary checks
  1. 1. Write the inner radicand requirement before using the inner function's output.
  2. 2. Substitute the inner output into the outer radicand and require it to be nonnegative.
  3. 3. Use the inner range when possible. A real square root output is always at least zero.
  4. 4. Before squaring an inequality, check that both compared sides are nonnegative. Then square and solve while preserving the earlier requirements.
  5. 5. If a root is a denominator, replace its nonnegative condition with a greater than zero one.
  6. 6. Combine the bounds and test endpoints in the original two-stage formula.
Decompose by naming the inside and outside jobs
  1. 1. Work out h at a permitted small input. The final job you perform suggests the outer function; everything before it suggests the inner function.
  2. 2. Define g(x) as that package, which will be calculated first.
  3. 3. Define f(x) as the operation applied to one input package.
  4. 4. Substitute g(x) into f and show that f(g(x)) recreates h(x).
  5. 5. Check the composite domain against the original domain. A formula match alone can hide a lost input.
  6. 6. If another split is requested, choose a different package and repeat the same checks.
Traps
Combine two functions with arithmetic

Subtracting only the first term of a function. (x2 − 1) − (x − 1) subtracts the entire second expression, so both of its signs change.

Composition passes one answer into the next function

Starting with f because its name appears first. In f ∘ g, g receives the original input. Expand the circle notation before calculating.

Order changes the result, and units must fit

Treating a valid arithmetic calculation as proof that an application makes sense. Label the units as well as the numbers.

Follow a composition through tables

Reading the same input column in both pictures. The outer lookup uses the inner output, which can move you to a new column.

Follow a composition across two graphs

Using the first graph's output as a height on the second graph. Move it to the second x-axis before finding the outer output.

Evaluate formulas one number at a time

Replacing only the squared input in t2 − t. The same input goes into both positions, so f(5) is 52 − 5.

Substitute the whole inside expression

Writing (2x + 1)2 = 4x2 + 1. The square multiplies two whole sums, so the two cross products must appear.

A composite domain has two gates

Checking only the simplified final denominator. That can lose an inner restriction which disappeared during algebra.

Square roots add boundary checks

Demanding a positive radicand for every square root. Ordinary roots allow zero; roots in denominators must avoid zero because of division.

Decompose by naming the inside and outside jobs

Giving the two correct component formulas in the wrong order. Recompose f(g(x)) on paper before accepting your decomposition.

Transformation of functions

  1. Vertical shifts: move every height by the same amount
  2. Horizontal shifts: why the inside acts in the opposite direction
  3. Combine shifts and read the domain and range
  4. Reflections: the minus sign tells you which coordinate changes
  5. Even, odd, or neither: test the whole formula
  6. Vertical stretch and compression: multiply the heights
  7. Horizontal stretch and compression: divide the input coordinates
  8. Put everything together: factor first, then move points

The unit at a glance

Rules
Vertical shifts: move every height by the same amount

g(x) = f(x) + k sends (u, v) to (u, v + k). Positive k moves up; negative k moves down. The domain stays the same; every range value gains k.

Horizontal shifts: why the inside acts in the opposite direction

g(x) = f(x − h) sends (u, v) to (u + h, v). Positive h moves right; negative h moves left. Solve new input − h = old input whenever the sign feels uncertain.

Combine shifts and read the domain and range

g(x) = f(x − h) + k sends (u, v) to (u + h, v + k). These shifts commute, meaning either order gives the same graph, because each changes a different coordinate.

Reflections: the minus sign tells you which coordinate changes

Vertical reflection: g(x) = −f(x), with (u, v) becoming (u, −v).
Horizontal reflection: h(x) = f(−x), with (u, v) becoming (−u, v).

Even, odd, or neither: test the whole formula

On a domain symmetric about zero: even means f(−x) = f(x); odd means f(−x) = −f(x), for every allowed x.
If neither identity holds for all allowed inputs, the function is neither. The zero-valued function on a symmetric domain satisfies both identities.

Vertical stretch and compression: multiply the heights

For g(x) = a·f(x), (u, v) becomes (u, a·v). If |a| > 1, stretch vertically; if 0 < |a| < 1, compress vertically.
If a < 0, also reflect across the x-axis. If a = 0, all defined outputs become zero; this is a collapse, not an ordinary stretch or compression.

Horizontal stretch and compression: divide the input coordinates

g(x) = f(bx), b ≠ 0, sends (u, v) to (ub, v). |b| > 1 compresses horizontally; 0 < |b| < 1 stretches horizontally. If b < 0, also reflect across the y-axis.

Put everything together: factor first, then move points

For g(x) = a·f(b(x − h)) + k with b ≠ 0, the Point rule is (u, v) to (ub + h, a·v + k). Factor first; scale or reflect each coordinate before shifting that coordinate.

Recipes
Vertical shifts: move every height by the same amount
  1. 1. Find the number added outside f. Include its sign, because −4 is a shift of k = −4.
  2. 2. Keep every horizontal coordinate, because the input sent into f has not changed.
  3. 3. Add k to every height, because g outputs the old height plus k.
  4. 4. Move several recognizable points and connect them with the original shape.
  5. 5. Substitute a point into the new formula to check its new height.
Horizontal shifts: why the inside acts in the opposite direction
  1. 1. Find the expression inside f; it is the input the old function receives.
  2. 2. Set that expression equal to a known old input u, because this asks where the same old height appears.
  3. 3. Solve for the new input x. Add when the expression subtracts, and subtract when it adds.
  4. 4. Keep the old height v, because the function receives the same old input u.
  5. 5. Move several points and substitute their new inputs into g to check.
Combine shifts and read the domain and range
  1. 1. Recognize the original toolkit shape before changing it.
  2. 2. Read h from x − h. If you see x + 2, write h = −2.
  3. 3. Read k from the addition outside the function.
  4. 4. Move the landmark and at least two other points by (h, k).
  5. 5. Check allowed inputs using the original function's restrictions, then translate the heights to obtain the range.
  6. 6. Substitute a new point into the formula and compare with its transformed height.
Reflections: the minus sign tells you which coordinate changes
  1. 1. Locate the minus sign. Outside the function means negate the output; inside with x means negate the input coordinate.
  2. 2. Choose points on the original graph. Change only the coordinate named by the reflection.
  3. 3. Check the Domain, the allowed inputs, and the Range, the resulting outputs. A horizontal reflection negates the domain values; a vertical reflection negates the range values.
  4. 4. Substitute a transformed point into the new formula. Confirm that it gives the transformed height.
Even, odd, or neither: test the whole formula
  1. 1. Check that every allowed input x has its opposite −x in the domain. A domain that fails this condition rules out both symmetries.
  2. 2. Replace every x in the formula with (−x), including x inside powers and multiplied terms.
  3. 3. Simplify. For an even power, the minus signs cancel in pairs. For an odd power, one minus sign remains.
  4. 4. Compare the entire result with f(x). If they match for every allowed input, the function is even.
  5. 5. Separately write −f(x), distributing its minus to every term. If f(−x) matches this expression for every allowed input, the function is odd. If only the even comparison succeeded, it is even. If neither comparison succeeded, it is neither. If both succeed, it is both; the zero function on a symmetric domain does this.
Vertical stretch and compression: multiply the heights
  1. 1. Find the multiplier a outside the function. Its magnitude |a| sets the size change, and its sign tells you whether to reflect.
  2. 2. Keep every input coordinate. Multiply each entire signed output by a, including outputs below zero.
  3. 3. If a shift is added outside afterward, multiply the original height first and then add the shift. The shifted graph is scaled relative to the line y = k in a·f(x) + k.
  4. 4. Keep the original domain. Multiply the original range values by a, reversing their order when a is negative.
  5. 5. Check a transformed point by substituting its unchanged input into the new formula.
Horizontal stretch and compression: divide the input coordinates
  1. 1. Find b, the multiplier of the input before f receives it.
  2. 2. Set bx = u for each known old input u, because this recreates its old height.
  3. 3. Divide the old input by b, including the sign. A fractional b calls for division by a fraction.
  4. 4. Keep the old height unless an outside change is also present.
  5. 5. Move endpoints, corners, and several other points before drawing the curve.
  6. 6. Substitute the new input into bx to check that it returns u.
Put everything together: factor first, then move points
  1. 1. Recognize f and its domain, range, and landmarks.
  2. 2. Factor the entire input into b(x − h). Distribute it back out to verify the factoring.
  3. 3. Label a, b, h, and k, keeping every sign.
  4. 4. For each old point (u, v), compute new x = u ÷ b + h.
  5. 5. Compute new y = a·v + k. Multiply before adding because that is the outside formula's order.
  6. 6. Move at least three points and any asymptotes or endpoints; draw the transformed shape.
  7. 7. Find the new domain from b(x − h) belonging to the old domain, and the new range from a·v + k over old range values.
  8. 8. Substitute a moved point into the original unfactored formula as a second check.
Traps
Vertical shifts: move every height by the same amount

Changing x when the added number is outside. For f(x) + 3, finish finding the old height first and then add 3; the left-to-right address stays put.

Horizontal shifts: why the inside acts in the opposite direction

Reading f(x + 3) as right 3. Set x + 3 equal to an old input: x = old input − 3, so the graph moves left. The equation explains the direction when a memorized slogan feels unreliable.

Combine shifts and read the domain and range

Moving the corner correctly but leaving the old domain and range. For x+2 + 3, the allowed inputs start at −2 and the heights start at 3. Check the inside restriction and the lowest height separately.

Reflections: the minus sign tells you which coordinate changes

Choosing the mirror axis from the coordinate that changes. A vertical reflection changes y but reflects across the x-axis. A horizontal reflection changes x but reflects across the y-axis. Name the mirror line and the moving coordinate separately.

Even, odd, or neither: test the whole formula

Calling a function odd because some terms change sign. Odd means the entire output changes sign, including its constant term. Compare with −f(x) written in full. A few matching number pairs can check a proof, but cannot replace an identity that covers every input.

Vertical stretch and compression: multiply the heights

Saying a stretch moves every point upward. A positive scale larger than 1 sends positive outputs up and negative outputs down, increasing distance from the x-axis. Also keep a·f(x) separate from f(ax): the bottom two table rows preview the horizontal-coordinate changes explained in lesson 7.

Horizontal stretch and compression: divide the input coordinates

Calling f(2x) a horizontal stretch because 2 is bigger than 1. The multiplier is bigger, but the coordinate must be smaller: 2x = u gives x = u ÷ 2. Also, f(2x) and 2f(x) generally give different graphs.

Put everything together: factor first, then move points

Using 6 as the final shift in f(2x − 6), or shifting a height before scaling it. Factor the input and write the two coordinate equations. For a·f(b(x − h)) + k, divide then add h horizontally, and multiply then add k vertically.

Absolute value functions

  1. Absolute value measures distance
  2. Distance from a center and tolerance
  3. Build and read the V graph
  4. Write an equation from a graph
  5. Solve an absolute value equation
  6. Find zeros and axis intercepts
  7. Less than B means between
  8. More than B means outside
  9. Use boundaries and graphs to find positive or negative outputs
  10. When B is zero or negative

The unit at a glance

Rules
Absolute value measures distance

|x| = x when x ≥ 0; |x| = −x when x < 0. Nonnegative means zero or positive. Opposite means the same distance from zero on the other side: the opposite of −7 is 7. Always |x| ≥ 0, and |x| = 0 exactly when x = 0. A piecewise function chooses one instruction according to the input: use the first line for zero or positive inputs, the second for negative inputs.

Distance from a center and tolerance

Distance between two real numbers A and B is |A − B| = |B − A|. Here A and B name the two positions. For an allowed distance r ≥ 0 from center c, at most r means |x − c| ≤ r, with ends c − r and c + r included. Strictly less than r means |x − c| < r, with the ends excluded. Exactly r means |x − c| = r. At least r means |x − c| ≥ r. More than r means |x − c| > r. The sign ± is read plus or minus: c ± r names the lower limit c − r and upper limit c + r. If r = 0, the two end positions coincide at c; an exact zero distance has only that one position.

Build and read the V graph

For f(x) = a|x − h| + k with a ≠ 0: a is the number multiplying the distance, h is its horizontal center, and k is the outside added height. Vertex: (h, k). Left slope: −a; right slope: a. It opens up if a > 0 and down if a < 0. Domain: all real numbers. Range: y ≥ k if a > 0; y ≤ k if a < 0.

Write an equation from a graph

Vertex form is f(x) = a|x − h| + k. From vertex (h, k) and another point (p, q) with p ≠ h: a = q−khorizontaldistance, where horizontal distance = |p − h|. For an upward V, width at height D above the corner is 2D ÷ a, with D > 0. An x-intercept, or horizontal intercept, is a point (x, 0); its input is called a zero.

Solve an absolute value equation

Isolate |A| = B first. For B > 0, solve A = B or A = −B. For B = 0, solve A = 0. For B < 0, there is no solution. These give two, one, or no inputs when A = mx + c and m ≠ 0. Check every input in the original equation.

Find zeros and axis intercepts

Zeros: solve f(x) = 0 to find the inputs whose output is zero. Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In a|x − h| + k with a ≠ 0: opposite signs for a and k give two x-intercepts; k = 0 gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.

Less than B means between

For B > 0: |A| < B means −B < A < B; |A| ≤ B means −B ≤ A ≤ B. Both comparisons must hold: 'and'. A is everything inside the bars; B is the number on the other side.

More than B means outside

For B > 0: |A| > B means A < −B or A > B; |A| ≥ B means A ≤ −B or A ≥ B. For an inside line with a nonzero number multiplying x, solve each alternative and join its two outside intervals with ∪.

Use boundaries and graphs to find positive or negative outputs

Find boundaries by solving the corresponding equality. Test one input inside each interval between boundaries, or compare graph heights. For f(x) < 0, choose the portions below the x-axis; for f(x) > 0, choose those above. Negative multiplication or division flips every comparison sign. Allow a boundary only when its original comparison permits equality.

When B is zero or negative

If B < 0: |A| = B, |A| < B, and |A| ≤ B have no solution; |A| > B and |A| ≥ B hold for every allowed input. If B = 0: |A| = 0 and |A| ≤ 0 mean A = 0; |A| < 0 has none; |A| > 0 means A ≠ 0; |A| ≥ 0 holds for every allowed input.

Recipes
Absolute value measures distance
  1. Calculate the entire expression inside the bars without changing its individual signs.
  2. If the result is zero or positive, keep it.
  3. If it is negative, use its opposite, the positive number the same distance from zero.
  4. Finish outside operations afterward. A number beside the bars multiplies: 3|x + 2| means 3 × |x + 2|.
Distance from a center and tolerance
  1. Choose a letter for the actual value, such as x, a resistance R, a score S, or a temperature T. Identify the center c.
  2. Find the permitted distance r. For a percent tolerance, multiply the size of the stated rating by the percent divided by 100.
  3. Read the words carefully. At most, no more than, and ends included use an equality bar under the comparison. Strictly less than and strictly more than leave the end out.
  4. Write |actual value − center|, then the comparison and distance.
  5. Locate the two positions c − r and c + r. Nearby means the stretch between them. Farther away means the left side or the right side beyond them. Exactly that distance means the two end positions.
  6. Keep the units. Use a closed, filled dot or a bracket for an included end; use an open, hollow dot or a parenthesis for an excluded end.
Build and read the V graph
  1. Set the entire inside equal to 0 and solve. This finds the input where its distance is zero, the corner's x-coordinate.
  2. Put that input into the full formula to find the corner's y-coordinate, then plot the corner.
  3. Choose one and two units on each side. Substitute all four inputs into the full formula, especially when a number multiplies x inside the bars.
  4. Draw an input and output table, plot its five points, connect each side with a straight arm, and extend the arms.
  5. Read domain as the graph's reach across the x-axis and range as its reach up the y-axis. For a limited input stretch, check both ends and the corner if it lies inside.
Write an equation from a graph
  1. Read the corner from the grid: its horizontal position is h and its height is k.
  2. Write f(x) = a|x − h| + k, leaving the stretch factor a unknown.
  3. Read another clear point (p, q). Go to the x-axis to read p and to the y-axis to read q.
  4. Subtract the corner height k from q and divide by the horizontal distance |p − h|. This finds the stretch factor a.
  5. Put the resulting a into the formula and check it at a second point.
  6. For a requested x-intercept, find where the drawing reaches height 0. Algebraically, set the output to 0 to find its input. A positive distance from h has one position on each side, h minus that distance and h plus it.
Solve an absolute value equation
  1. Get the bars and their complete contents alone. Undo addition or subtraction outside first, then multiplication or division.
  2. Name A, everything inside the bars, and B, the number on the other side. Inspect B before splitting.
  3. For B > 0, write A = B or A = −B. For B = 0, write only A = 0. For B < 0, stop with no solution.
  4. Solve each possible equation by undoing the inside operations. This finds the inputs that produce the required inside values.
  5. Substitute each possible answer into the original equation. Keep only inputs that make both sides equal.
  6. Write the answer as inputs and as a set. {−7, 3} lists two answers. {4} lists one answer. ∅ means the empty set, no answers, and can also be written { }. Braces collect answers; a comma separates them.
Find zeros and axis intercepts
  1. For zeros or x-intercepts, set the output f(x) equal to 0. This asks which inputs place the graph on the horizontal axis.
  2. Isolate the bars. Inspect B, the number on the other side, to determine whether two, one, or no inside equations are possible.
  3. Solve each possible equation to find the zero inputs. Substitute each input into the original formula to confirm output 0.
  4. List zeros as numbers or an answer set. List x-intercepts as points with y-coordinate 0.
  5. For the y-intercept, substitute x = 0 into the original formula and calculate the output. Write the point (0, f(0)).
Less than B means between
  1. Get the bars alone, then check that B, the number on the other side, is positive. Zero or negative B needs the final lesson's cases.
  2. Write the three part inequality with −B on the left and B on the right. Keep equality if the question allows it.
  3. Undo each inside operation on all three parts. Dividing by a negative reverses both signs.
  4. Read the finished bounds from smaller to larger and write the interval.
  5. A strict sign excludes the endpoint: use a hollow dot and a parenthesis. An inclusive sign allows equality: use a filled dot and a bracket. Check the center and both endpoints in the original question.
More than B means outside
  1. Get the bars alone and inspect B, the number on the other side. Use this method when B is positive.
  2. Write the left outside inequality and the right outside inequality, connected by 'or'. Each alternative is a branch.
  3. Solve each branch separately. Multiplying or dividing by a negative flips that branch's comparison sign.
  4. Put the resulting intervals in order from left to right and join them with ∪.
  5. Infinity is a direction, not an actual endpoint, so it always uses a parenthesis. At each finite boundary, an actual number, use a bracket only when equality passes the original comparison.
Use boundaries and graphs to find positive or negative outputs
  1. Decide which heights to compare, such as f(x) and 0, or |x − 5| and 4.
  2. Set the two heights equal and solve. This finds every input at which the graph reaches the comparison height. Substitute those inputs back to confirm the crossings.
  3. List the open intervals separated by those boundary inputs. Open means the boundary itself is not part of the interval being tested.
  4. Pick one test point inside each interval and substitute it into the original comparison.
  5. Keep every interval whose test point passes. Include a boundary only if substituting it into the original comparison passes too.
  6. State the allowed inputs as an inequality, interval, or set-builder condition. If more than one interval works, use 'or' and ∪.
When B is zero or negative
  1. Get the absolute value alone. In an inequality, negative multiplication or division flips the sign. In an equation, equality remains equality.
  2. Inspect B, the number on the other side, after that isolation.
  3. If B is negative, equality or a smaller distance is impossible. A greater distance accepts every allowed input.
  4. If B is zero, decide whether the sign requires equality, excludes zero distance, or allows every nonnegative distance.
  5. For a required zero distance, solve A = 0 to find the center input. Substitute it back to confirm distance zero. For positive distance, exclude exactly the inputs where A = 0.
  6. If B is positive, use two equations for equality, between for a smaller distance, or outside for a greater distance. Check the answer in the original problem.
Traps
Absolute value measures distance

Making individual numbers positive before finishing the inside changes the problem. In |−3 + 5|, the wrong calculation |3 + 5| gives 8; the correct inside is 2, so the answer is 2. In |2 − 9|, changing subtraction to addition gives 11; the correct inside is −7, so the answer is 7.

Distance from a center and tolerance

The center and permitted distance have different jobs. In |R − 680| ≤ 34, 680 names the rating, while 34 says how far the measurement may depart from it.

Build and read the V graph

Reading x − 3 as a left shift. Find where the inside is zero: x − 3 = 0 gives x = 3, so the corner moved right. The memory device is 'inside lies, outside tells the truth'; the zero calculation explains it.

Write an equation from a graph

Dividing by p − h instead of |p − h|. A point left of the corner has a negative coordinate difference, but its distance is positive. Keep the bars so a correctly records whether the V opens up or down.

Solve an absolute value equation

Splitting before isolating, or keeping only the positive branch. In 3|x + 2| − 4 = 11, the needed distance is 5, not 11. Box the isolated equation, then choose its branches.

Find zeros and axis intercepts

Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.

Less than B means between

Changing only the middle of a three-part inequality, or treating < and ≤ alike. Every algebra move acts on all three parts, and the original sign decides whether the boundary belongs.

More than B means outside

Using 'and' for an outside condition. No x can be both less than −4 and greater than 3. Use 'or', and use ∪ to keep both permitted pieces.

Use boundaries and graphs to find positive or negative outputs

Multiplying by −2 and keeping the less than sign would select the center, where this function is positive. Flip the sign immediately and confirm your answer with an actual output from each chosen interval.

When B is zero or negative

Using the formulas for B positive before checking the isolated limit. |x − 6| > −2 is true for every real x, so it does not need a pair of boundary equations.

Inverse functions

  1. Undoing a function, and what f^-1 means
  2. Checking that two functions are inverses
  3. One-to-one functions and the horizontal line test
  4. Domain and range trade places
  5. Reading an inverse from a table and from a graph
  6. Restricting a domain so an inverse exists
  7. Finding the inverse of a formula by swapping and solving

The unit at a glance

Rules
Undoing a function, and what f^-1 means

When f has an inverse function and f(a) = b, then f−1(b) = a. The inverse function f−1 takes each output of f back to the input it came from. The −1 is part of the name, not a power: f−1(x) does not mean 1f(x).

Checking that two functions are inverses

Two functions f and g are inverses of each other exactly when both of these are true: f(g(x)) = x for every input x that g accepts, and g(f(x)) = x for every input x that f accepts. When both hold, g is f−1 and f is g−1. If either one fails, even for a single input, they are not inverses.

One-to-one functions and the horizontal line test

A function f is a one-to-one function when different inputs always give different outputs: f(a) = f(b) happens only when a = b. A function has an inverse function exactly when it is one-to-one. Horizontal line test: a function is one-to-one exactly when no horizontal line meets its graph at more than one point.

Domain and range trade places

If f is a one-to-one function, then: domain of f−1 = range of f, and range of f−1 = domain of f.

Reading an inverse from a table and from a graph

If f is a one-to-one function, then: (1) the table of f−1 is the table of f with its two rows traded; (2) the point (a, b) is on the graph of f exactly when the point (b, a) is on the graph of f−1; (3) the graph of f−1 is the graph of f reflected (flipped, as in a mirror) across the line y = x.

Restricting a domain so an inverse exists

A restricted domain is a smaller set of inputs than the full domain of a function. If f fails the horizontal line test, choose a restricted domain on which f is one-to-one. On that piece f has an inverse function. The usual choice also keeps every output of f, so the inverse accepts all of them. For f(x) = x2 the usual restricted domain is x ≥ 0, written [0, ∞). The domain of f−1 is then the range of f, and the range of f−1 is the restricted domain.

Finding the inverse of a formula by swapping and solving

For a one-to-one function f: write y = f(x), swap x and y to get x = f(y), solve for y, and name the result f−1(x). If solving produces ±, the domain of f picks the sign, because the outputs of f−1 are the inputs of f. The domain of f−1 is the range of f.

Recipes
Undoing a function, and what f^-1 means
  1. Read f−1(b) as a question in plain words: b came out of f. Which input went in?
  2. Rewrite the question as f(?) = b. The number inside f−1( ) is an output of f.
  3. Find that input. In a table, find b in the output row and read the input above it. With a formula, set the formula equal to b and solve for x.
  4. Write the answer as f−1(b) = the input you found.
  5. Check by going forward: put your answer into f and confirm that b comes out.
Checking that two functions are inverses
  1. Write down both rules, f(x) and g(x), side by side.
  2. First order, f(g(x)): copy the rule for f, but wherever it has x, write an empty pair of parentheses. Then put the whole formula for g(x) inside the parentheses.
  3. Simplify. The result must be exactly x. Not x + 2, not 3x, not −x.
  4. Second order, g(f(x)): copy the rule for g with empty parentheses in place of x, and put the whole formula for f(x) inside.
  5. Simplify. Again the result must be exactly x.
  6. Decide. If both orders gave x, for every input the inner function accepts, f and g are inverses. If either one gave anything else, they are not, and you can stop at the first failure.
  7. Spot check with one number: pick a number f accepts, run it through f and then g, and confirm it comes back. Then pick a number g accepts and run it through g and then f.
One-to-one functions and the horizontal line test
  1. Say the question in plain words: do any two different inputs share an output?
  2. From a table or a list of pairs: read along the outputs. A value that sits under two different inputs means the function is not one-to-one. No repeated output means it is one-to-one.
  3. From a graph: hold a horizontal line at the bottom of the picture and slide it to the top. If at any height it meets the graph at two or more points, the function is not one-to-one. If it meets the graph at most once at every height, the function is one-to-one.
  4. From a formula: look at its graph and use the horizontal line test, or write f(a) = f(b) and see whether that forces a = b.
  5. To say a function is not one-to-one, write down the proof: two different inputs and the output they share, such as f(−2) = 4 and f(2) = 4.
  6. State the conclusion about undoing: a one-to-one function has an inverse function, and a function that is not one-to-one does not.
Domain and range trade places
  1. Make sure f is a one-to-one function, so that f−1 exists: no output repeated in a table, or a graph that passes the horizontal line test.
  2. Find the domain of f: every input f allows.
  3. Find the range of f: every output f actually produces. List only outputs that really come out, not every number you can imagine.
  4. Trade the two lists. Domain of f−1 = range of f. Range of f−1 = domain of f.
  5. Check with one pair. Pick an allowed input a and compute b = f(a). Then f−1(b) = a, so b must sit in your new domain and a must sit in your new range.
Reading an inverse from a table and from a graph
  1. Check that f is a one-to-one function. In a table, no number may appear twice in the output row. On a graph, use the horizontal line test: no horizontal line may meet the graph twice.
  2. To find one value, such as f−1(7), say what it asks: 'f gave the output 7; which input was it?' Find 7 in the output row of f, or at height 7 on the y-axis, and read back to the input.
  3. To get the whole table of f−1, trade the two rows. The old output row becomes the new input row.
  4. If you want the new inputs in order from smallest to largest, slide whole columns. Never separate an input from its own output.
  5. To get the graph of f−1, pick several clear points on the graph of f, write each one as (a, b), and swap it to (b, a).
  6. Plot the swapped points and join them with the same kind of shape the original had. Draw the line y = x lightly: each point and its swap must sit straight across that line from each other, the same distance away.
  7. Check one value both ways: if you wrote f−1(b) = a, the table or graph of f must show f(a) = b.
Restricting a domain so an inverse exists
  1. Run the horizontal line test on the whole graph. If no horizontal line meets it twice, stop: the function already has an inverse and needs no restriction.
  2. If the test fails and the graph turns around once, as a parabola or an absolute value graph does, find that turn. For a squared expression, the turn is where the part being squared equals 0. For x2 that is x = 0. For (x − 2)2 it is x = 2.
  3. For a graph with that one turn, keep the turning point and everything on one side of it. Unless the problem names a side, keep the right side: x ≥ the turning value.
  4. Run the horizontal line test again on the kept piece only. Every horizontal line must now meet it at most once.
  5. Check whether any output was lost. The usual choice keeps the range of the whole function; a piece with a smaller range still has an inverse, but that inverse accepts fewer numbers.
  6. Write the restricted domain next to the formula, for example f(x) = x2, x ≥ 0. It is now part of the function.
  7. Trade places: the domain of f−1 is the range of f, and the range of f−1 is the restricted domain. Every answer the inverse gives must lie in the restricted domain.
Finding the inverse of a formula by swapping and solving
  1. Make sure f is a one-to-one function on its domain. Use the horizontal line test, or use the restricted domain you are given. If two inputs share an output, stop: there is no inverse function yet.
  2. Write y in place of f(x). If the function comes with a domain condition such as x ≥ 0, write it beside the equation.
  3. Swap the letters. Every x becomes y and every y becomes x, in the equation and in the domain condition. So x ≥ 0 becomes y ≥ 0.
  4. Solve the swapped equation for y. One y: undo the steps in reverse order. Two y's in a fraction: clear the fraction, gather the y terms on one side, factor y out, divide. A squared y: take the square root of both sides and write ±.
  5. If ± appeared, keep the one sign that fits the condition on y.
  6. Write f−1(x) = your result, and state its domain, which is the range of f.
  7. Check. Send one number through f, then send the result through f−1. You should land on the number you started with.
Traps
Undoing a function, and what f^-1 means

Reading f−1(x) as 1f(x). On the name of a function, −1 means inverse, not 1 over. To avoid the mistake, say f inverse out loud and turn f−1(b) into the question f(?) = b before you compute anything. When 1 over f(x) is meant, it is written 1f(x)−1 or [f(x)], with the −1 outside brackets.

Checking that two functions are inverses

Stopping after one order. Getting f(g(x)) = x feels like the finish, but it is half of the test. With f(x) = x2 and g(x) = x, the first order gives (x)2 = x and passes, while the second order gives g(f(−3)) = 9 = 3, which is not −3. Always write both lines, f(g(x)) and g(f(x)), before you answer yes.

One-to-one functions and the horizontal line test

Using the wrong line. A vertical line tests whether a graph is a function at all. A horizontal line tests whether that function is one-to-one. The graph of y = x2 passes the first test and fails the second. Say the question out loud before you draw the line: "does one input have two outputs?" calls for a vertical line, and "do two inputs share one output?" calls for a horizontal line.

Domain and range trade places

Writing the domain of f again as the domain of f−1. The two functions trade their lists, and the two lists are often different. For f(x) = x−2 + 1 the tempting answer is 'domain of f−1: [2, ∞)', but [2, ∞) is what f−1 gives back, not what it takes in. To avoid this, write two labeled lines before you answer, 'goes into f−1' and 'comes out of f−1', and fill the first line from the outputs of f.

Reading an inverse from a table and from a graph

Reading in the forward direction. For f−1(5), the 5 is an output of f, so look for it in the output row of the table, or at height 5 on the y-axis of the graph. If you look for 5 in the input row, or at 5 on the x-axis, you find f(5), the answer to the forward question. Before you read anything, say the question aloud: 'f gave 5; what went in?'

Restricting a domain so an inverse exists

The most common mistake is to restrict the domain on paper and then forget it. Once you keep x ≥ 0 for f(x) = x2, the inputs −1, −2, −3 and the rest are gone. So f−1(9) is 3 only. It is not "3 or −3", and it is not −3. To avoid the mistake, write the restricted domain beside the formula every time you write the function, and check that each answer from the inverse lies inside the restricted domain.

Finding the inverse of a formula by swapping and solving

The most common mistake comes with the square root. After x = y2, people write y = x out of habit, or leave y = ±x as the answer. Neither is safe. Write ± first, then look at the condition on y that came from the domain of f, and keep the one sign that fits it. For x ≥ 0 that is x. For x ≤ 0 it is −x. Then test with a number from the domain of f: it must come back to itself.

Linear functions

  1. One steady change, four ways to show it
  2. Read the starting amount and the amount per step
  3. Increasing, decreasing and constant lines
  4. Slope: output change divided by input change
  5. Anchor a line with a slope and a point
  6. Build the equation from two points
  7. Read a graph and choose a method
  8. Turn a real situation into a linear model
  9. Build and check a line from a table

The unit at a glance

Rules
One steady change, four ways to show it

A linear function has form f(x) = mx + b, where fixed real numbers m and b give the constant rate m and input-zero output b. Its graph lies on a straight nonvertical line. If m ≠ 0, it is a polynomial of degree 1; if m = 0, it is a constant function.

Read the starting amount and the amount per step

In f(x) = mx + b, slope m is output change per input unit and initial value b = f(0). The y-intercept or vertical intercept is the point (0, b).

Increasing, decreasing and constant lines

In f(x) = mx + b, m > 0 gives an increasing linear function, m < 0 gives a decreasing linear function, and m = 0 gives a constant function with a horizontal line.

Slope: output change divided by input change

m = riserun = y2−y1x2−x1 = f(x2)−f(x1)x2−x1, where x2 ≠ x1. Units are output units per input unit.

Anchor a line with a slope and a point

point-slope form is y − y1 = m(x − x1). Equivalently, y = mx + b with b = y1 − mx1.

Build the equation from two points

for distinct inputs, find m = y2−y1x2−x1, then b = y1 − mx1. Write y = mx + b or f(x) = mx + b.

Read a graph and choose a method

For a nonvertical line, m = y2−y1x2−x1, then y = mx + b. Read b at x = 0, or find b = y1 − mx1 from a known point.

Turn a real situation into a linear model

A constant-rate model has output = starting amount + rate × input. Write f(x) = mx + b with units for m and b and a domain appropriate to the situation.

Build and check a line from a table

With at least two distinct inputs and one output per input, compare outputchangeinputchange on every adjacent interval of increasing inputs. Equal rates mean the listed points fit f(x) = mx + b. Read b under zero, or use b = y − mx.

Recipes
One steady change, four ways to show it
  1. 1. Name the input and output with their units.
  2. 2. Find the starting amount b and constant rate m.
  3. 3. Write words and formula, calculate table columns, and plot the same pairs.
  4. 4. Keep the inputs permitted by the story.
Read the starting amount and the amount per step
  1. 1. Identify input, output, and their units.
  2. 2. Read the input coefficient as slope, with output-per-input units.
  3. 3. Substitute zero to find the initial value and vertical intercept.
  4. 4. Describe the start and rate in words, then evaluate any requested input.
Increasing, decreasing and constant lines
  1. 1. Write the formula as mx + b and keep the sign attached to m.
  2. 2. Read the input coefficient; if the term is absent, m = 0.
  3. 3. Use positive, negative, or zero slope to classify the function.
  4. 4. Compare outputs at two increasing allowed inputs.
  5. 5. Keep counting inputs whole and remaining counts nonnegative.
Slope: output change divided by input change
  1. 1. Label the two points so each input stays paired with its output. The subscripts 1 and 2 name points, while raised exponents name powers.
  2. 2. Calculate rise as second output minus first output.
  3. 3. Calculate run as second input minus first input, in matching order.
  4. 4. If run is zero, stop. Otherwise divide rise by run and reduce.
  5. 5. Attach units. Multiply slope by run to check that you recover the rise.
Anchor a line with a slope and a point
  1. 1. Write m and the anchor (x1, y1).
  2. 2. Substitute into y − y1 = m(x − x1), keeping parentheses around negative coordinates.
  3. 3. Distribute m to both terms.
  4. 4. Add y1 to both sides to isolate y and reveal b.
  5. 5. Plug the original input into the final equation; its output must match the anchor. Check that the coefficient of x is still m.
Build the equation from two points
  1. 1. Convert function values into coordinate pairs: f(a) = c becomes (a, c).
  2. 2. Check that the inputs differ, then find slope in matching subtraction order.
  3. 3. Use an input-zero point to read b directly, or use an available point in point-slope form.
  4. 4. Rewrite in the requested form.
  5. 5. Substitute both given inputs into the final rule; each output must match.
Read a graph and choose a method
  1. 1. Read the numbers on both axes, because a drawn square need not mean one coordinate unit.
  2. 2. Choose two exact labeled points with different x-coordinates, because a nonzero run is needed for the slope.
  3. 3. Calculate output change divided by input change in the same point order, because reversing only one subtraction changes the sign.
  4. 4. Read the output where x = 0 if that crossing is visible. Otherwise substitute a known point into y = mx + b and solve for b to find the unseen starting output.
  5. 5. Write the equation and substitute both visible points, because a correct equation must give both of their outputs.
Turn a real situation into a linear model
  1. 1. Define the input and output, because a number without its meaning can lead to the wrong units or domain.
  2. 2. Identify the starting amount b and rate m. If two totals are given, divide output change by input change to find m.
  3. 3. If b is missing, substitute a known pair into output = mx + b and solve for b to recover the starting amount. Plug the value back into that pair.
  4. 4. Write the model with its units and allowed inputs, because counting objects differs from measuring continuous time.
  5. 5. For a given input, substitute it to find the output. For a target output, solve for the input, then plug it back in and check that it belongs to the domain.
Build and check a line from a table
  1. 1. Arrange columns in increasing input order. Keep one copy of repeated identical pairs. Different outputs at the same input rule out a function, and one distinct pair alone does not determine a slope.
  2. 2. Read each column as one input-output pair, because values in the same column belong together.
  3. 3. For every neighboring pair, subtract the outputs and divide by the corresponding input difference, because unequal input gaps must be accounted for.
  4. 4. Compare all the rates. If any differ, no single linear function fits the whole table exactly.
  5. 5. If the rates match, read b in the column under zero. If zero is missing, substitute any listed pair and solve for b to recover the missing starting output.
  6. 6. Substitute every listed input into the candidate equation, because fitting the first pair alone does not establish agreement with the whole table.
Traps
One steady change, four ways to show it

Tip: Count the starting 250 once. Writing 333t would repeat the starting distance at every second.

Read the starting amount and the amount per step

Tip: At 33 feet, 14.322 PSI is the added pressure and 29.018 PSI is the total. Include the initial pressure when the question asks for pressure.

Increasing, decreasing and constant lines

Tip: Classify by the input coefficient rather than the starting value. In 3x − 2, the positive three gives increasing behavior.

Slope: output change divided by input change

subtracting outputs in one order and inputs in the other reverses the sign. Use the same starting point for both differences.

Anchor a line with a slope and a point

y − 4 = 2(x − 1) switches the coordinates. The number beside y must be the output; the number beside x must be the input.

Build the equation from two points

taking the first listed output as b. It gives b only when that point's input is zero; otherwise recover b by substitution.

Read a graph and choose a method

Treating the left edge of the displayed window as the y-axis. The y-axis is where x = 0, which may not be shown.

Turn a real situation into a linear model

Using the first observed total as the initial value when its input is not zero. Remove its accumulated change to find the starting amount.

Build and check a line from a table

Looking only at the output differences when the input gaps change. Always divide by the actual input gap for that interval.

Graphs of linear functions

  1. Draw a line by plotting points
  2. Start at the y-intercept and walk the slope
  3. Build a line by changing the identity function
  4. Read a graph and write its equation
  5. Find where the line reaches the x-axis
  6. Horizontal and vertical lines
  7. Compare parallel and perpendicular lines
  8. Write a parallel or perpendicular line through a point
  9. Find the point shared by two lines
  10. Use an intersection to find break-even

The unit at a glance

Rules
Draw a line by plotting points

Graph a linear function by plotting at least two distinct coordinate pairs (x, f(x)) and drawing the entire straight line through them. A third point checks the arithmetic.

Start at the y-intercept and walk the slope

In y = mx + b, the y-intercept is (0, b) and m = riserun = y2−y1x2−x1, with x2 ≠ x1.

Build a line by changing the identity function

To transform y = x into y = mx + b, multiply outputs by m, including a reflection if m < 0, then shift outputs by b. Stretch if |m| > 1; compress if 0 < |m| < 1.

Read a graph and write its equation

Read b at (0, b), calculate m = y2−y1x2−x1, then write f(x) = mx + b. If b is hidden, use b = y1 − mx1.

Find where the line reaches the x-axis

Set f(x) = 0 to find x-intercepts. For f(x) = mx + b with m ≠ 0, x = −bm and the point is (−bm, 0).

Horizontal and vertical lines

A horizontal line has equation y = c and slope 0. A vertical line has equation x = c, undefined slope, and is not a function of x.

Compare parallel and perpendicular lines

Nonvertical lines are parallel when m1 = m2 and b1 ≠ b2; coincident when both match. Lines with finite nonzero slopes are perpendicular when m1m2 = −1. Horizontal and vertical lines are perpendicular.

Write a parallel or perpendicular line through a point

Choose m equal to the given slope for a parallel line, or m = −1mgiven for a perpendicular line with nonzero finite given slope. Through (x1, y1), use y − y1 = m(x − x1).

Find the point shared by two lines

A solution to a system satisfies every equation. For y = f(x) and y = g(x), solve f(x) = g(x), find y, and check both. Two lines have one, no, or infinitely many shared points.

Use an intersection to find break-even

C(x) = F + vx, R(x) = px, and profit P(x) = R(x) − C(x). Break-even satisfies C(x) = R(x). For F > 0 and p > v, x = Fp−v.

Recipes
Draw a line by plotting points
  1. 1. Choose input values. If the slope contains a fraction, try multiples of its denominator. Multiples are results of multiplying by whole numbers: for a denominator of 3, use 0 × 3 = 0, 1 × 3 = 3 and 2 × 3 = 6.
  2. 2. Substitute each input into the function to find its output.
  3. 3. Record the pairs in a values picture, then plot each input across and output up.
  4. 4. Draw a straight line through the points and extend it both ways.
  5. 5. If a third point misses the line, recalculate before drawing.
Start at the y-intercept and walk the slope
  1. 1. Read b, then substitute 0 to verify the point (0, b).
  2. 2. Read m. Write a whole-number slope over 1.
  3. 3. Choose signed rise and run whose quotient is m.
  4. 4. Start at (0, b), move by that run and rise, and repeat.
  5. 5. Draw the line through the points. Check one point by substitution.
Build a line by changing the identity function
  1. 1. Sketch the identity function y = x using (0, 0) and (1, 1).
  2. 2. Read |m|, the size of m without its sign, to decide whether heights stretch or compress.
  3. 3. If m < 0, reflect the heights across the x-axis as part of that multiplication.
  4. 4. Add b to every new height. Positive b moves up; negative b moves down.
  5. 5. Verify a point in the final formula. Multiplication must occur before this stated shift.
Read a graph and write its equation
  1. 1. Read the y-intercept if it is shown. Confirm that the first coordinate is 0.
  2. 2. Choose two clearly marked points. Keep their order the same in both subtractions.
  3. 3. Compute rise divided by run and reduce the fraction.
  4. 4. Write the slope and intercept in f(x) = mx + b.
  5. 5. Substitute both points to verify the recovered equation.
Find where the line reaches the x-axis
  1. 1. Replace the output f(x) or y with 0. This selects points lying on the x-axis.
  2. 2. Solve the resulting equation for the input.
  3. 3. Substitute that found input into the original function. Its output must be 0.
  4. 4. State the input value and the coordinate point (x, 0).
  5. 5. If m = 0, inspect the constant output instead of dividing by zero.
Horizontal and vertical lines
  1. 1. Compare the coordinates of two distinct points.
  2. 2. If their y-values match, keep that output fixed: y = c.
  3. 3. If their x-values match, keep that input fixed: x = c.
  4. 4. Check both given points in the equation.
  5. 5. Do not force a vertical line into y = mx + b.
Compare parallel and perpendicular lines
  1. 1. Rewrite each nonvertical equation with y alone so its slope is visible.
  2. 2. Equal slopes and different intercepts mean parallel lines.
  3. 3. Equal slopes and equal intercepts mean coincident lines.
  4. 4. Otherwise multiply the slopes. A product of −1 means perpendicular lines.
  5. 5. Handle a vertical line separately: it is perpendicular to a horizontal line, and parallel to another distinct vertical line.
Write a parallel or perpendicular line through a point
  1. 1. Find the original slope from its equation or from two points.
  2. 2. Choose the new slope: same for parallel, negative reciprocal for perpendicular.
  3. 3. Insert the new slope and the required point in point-slope form, or use b = y1 − mx1.
  4. 4. Expand and isolate y if slope-intercept form is wanted.
  5. 5. Plug the supplied point into the final equation and check the slope relationship.
Find the point shared by two lines
  1. 1. Graph the two lines to locate or estimate their shared point.
  2. 2. If both outputs are formulas in the same input, set those formulas equal.
  3. 3. Solve for the shared input. Watch for a contradiction or an equality true for every input.
  4. 4. Substitute a found input into one original formula to obtain the output.
  5. 5. Substitute the point into both original equations, then report both coordinates.
Use an intersection to find break-even
  1. 1. Define the input quantity and its units; count sold items as nonnegative whole numbers.
  2. 2. Put fixed expense at the cost intercept and per-item expense at the cost slope.
  3. 3. Put selling price at the revenue slope, with revenue 0 before any sales.
  4. 4. Set cost equal to revenue and solve for the quantity.
  5. 5. Plug the quantity into both functions, then report quantity and dollars together.
  6. 6. Compare revenue with cost to tell profit from loss.
  7. 7. If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.
Traps
Draw a line by plotting points

Plotting (3, 3) as output first can hide the mistake because both numbers match. Practice with (0, 5): across 0, then up 5. The input always comes first.

Start at the y-intercept and walk the slope

Reading −23 as down 3 and right 2. The top is rise, the bottom is run. Write the two movements beside the fraction before plotting.

Build a line by changing the identity function

Doing the stated downward shift first and then halving the heights. That produces 12(x − 3) = 12x − 32, a different line.

Read a graph and write its equation

Subtracting the output coordinates in one direction and the input coordinates in the opposite direction. Write arrows between the two points, then use that same direction for both differences.

Find where the line reaches the x-axis

Setting x = 0 to find the x-intercept. The axis name tells you which coordinate is allowed to vary: on the x-axis, x varies while y stays 0.

Horizontal and vertical lines

Writing y = 7 for the vertical line. Say what stays fixed before choosing the letter. Fixed across position means x; fixed height means y.

Compare parallel and perpendicular lines

Changing only the sign or only flipping the fraction for a perpendicular slope. Both moves are needed, and the product must be −1.

Write a parallel or perpendicular line through a point

Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.

Find the point shared by two lines

Finding the shared input and stopping. A point needs its output too. Also check both original equations; a point that fits only one is not a system solution.

Use an intersection to find break-even

Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.

Complex numbers

  1. The number i and the square root of a negative number
  2. A complex number as a point in a plane
  3. Adding and subtracting complex numbers
  4. Multiplying complex numbers
  5. The conjugate and dividing complex numbers
  6. Powers of i repeat every four

The unit at a glance

Rules
The number i and the square root of a negative number

The imaginary unit i is the number with i2 = −1, so i = −1. For any positive number a: −a = ia. Example: −16 = i16 = 4i. Warning: a · b = ab is safe only when a and b are not both negative. When both are negative, write each root with i first, then multiply.

A complex number as a point in a plane

Standard form: a + bi, where a and b are real numbers and i is the imaginary unit (i2 = −1). Real part: a. Imaginary part: b, the number without the i. In the complex plane, a + bi is the point (a, b): a along the horizontal real axis, b along the vertical imaginary axis. Two complex numbers are equal only when their real parts are equal and their imaginary parts are equal.

Adding and subtracting complex numbers

(a + bi) + (c + di) = (a + c) + (b + d)i
(a + bi) − (c + di) = (a − c) + (b − d)i

Multiplying complex numbers

(a + bi)(c + di) = ac + adi + bci + bdi2 = (ac − bd) + (ad + bc)i, because i2 = −1. In words: multiply every term of the first number by every term of the second, replace i2 with −1, then collect the real numbers and collect the i terms.

The conjugate and dividing complex numbers

The complex conjugate of a + bi is a − bi. A number times its conjugate is real: (a + bi)(a − bi) = a2 + b2. To divide (the bottom must not be 0), multiply top and bottom by the conjugate of the bottom: a+bic+di = (a+bi)(c−di)c2+d2.

Powers of i repeat every four

i1 = i, i2 = −1, i3 = −i, i4 = 1, and then the list repeats. For any whole number n ≥ 0, divide n by 4 and call the remainder r. Then in = ir: remainder 1 gives i, remainder 2 gives −1, remainder 3 gives −i, and remainder 0 gives 1.

Recipes
The number i and the square root of a negative number
  1. For −75, use the negative-root rule −a = ia: −75 = i75. Here a = 75 is positive, so this rule handles the negative sign before you simplify the real root.
  2. Factor 75 = 25 · 3. Use the largest square factor, 25, because its square root is a whole number and 3 has no square factor greater than 1.
  3. Use the product rule for nonnegative roots: 75 = 25 · 3 = 53. Both factors under the roots are positive, so this split is valid.
  4. Put the i back with the simplified root: i · 53 = 5i3. The order of multiplication can change. Write i before the root so it is clearly outside.
  5. Check by squaring with i2 = −1: (5i3)2 = 25 · (−1) · 3 = −75. Also check the sign: the square root symbol chooses the positive imaginary coefficient, 53. Squaring alone would also accept the negative of this answer.
A complex number as a point in a plane
  1. Write 3 − 4i = 3 + (−4)i. The standard-form rule is a + bi, so the minus sign belongs to the coefficient of i.
  2. Match the parts: a = 3 and b = −4. The rule defines the imaginary part as the coefficient b, so it is −4 without the i.
  3. Use a + bi ↔ (a, b) to write the point (3, −4). The first coordinate is horizontal and the second is vertical, which keeps the real and imaginary parts separate.
  4. Start at the origin, where the axes cross, and move 3 units right. A positive real part goes right on the horizontal real axis.
  5. Move 4 units down and draw the dot. The imaginary part is negative, so the vertical move is down. Label the dot 3 − 4i.
  6. Check by reading the point back: its horizontal coordinate is 3 and its vertical coordinate is −4. The standard-form rule rebuilds 3 + (−4)i = 3 − 4i. Both parts match the given number, which is the rule for equality.
Adding and subtracting complex numbers
  1. For (8 − 3i) − (2 − 7i), use the subtraction rule (a − c) + (b − d)i. Match a = 8, b = −3, c = 2 and d = −7, keeping each sign with its part.
  2. Subtract both terms of the second number: (8 − 3i) − (2 − 7i) = 8 − 3i − 2 + 7i. Distributing the minus sign changes both signs, because subtracting a number means adding its opposite.
  3. Group matching terms: 8 − 3i − 2 + 7i = (8 − 2) + (−3 + 7)i. The addition and grouping rules let you bring real terms together and i terms together.
  4. Combine each group: (8 − 2) + (−3 + 7)i = 6 + 4i. The rule keeps the real result 6 and the imaginary coefficient 4 separate in a + bi form.
  5. Check by undoing the subtraction: (6 + 4i) + (2 − 7i) = (6 + 2) + (4 − 7)i = 8 − 3i. Adding back the number you subtracted returns the starting number.
Multiplying complex numbers
  1. For (3 + 2i)(1 + 4i), use the distributive rule: (3 + 2i)(1 + 4i) = 3 · 1 + 3 · 4i + 2i · 1 + 2i · 4i. Each term in the first factor multiplies each term in the second, so all four products are included.
  2. Multiply the coefficients and the i factors: 3 · 1 + 3 · 4i + 2i · 1 + 2i · 4i = 3 + 12i + 2i + 8i2. In the last product, i · i becomes i2 by the definition of a square.
  3. Use i2 = −1: 8i2 = −8. This turns the last product into a real term, so the full expression is 3 + 12i + 2i − 8.
  4. Combine like terms: 3 + 12i + 2i − 8 = (3 − 8) + (12 + 2)i = −5 + 14i. Real terms combine with real terms and i terms with i terms, giving standard form.
  5. Check with the rule’s coefficient formula. Set a = 3, b = 2, c = 1 and d = 4. The real part is ac − bd = 3 · 1 − 2 · 4 = −5. The imaginary part is ad + bc = 3 · 4 + 2 · 1 = 14. These give −5 + 14i again; check all four signed products if they disagree.
The conjugate and dividing complex numbers
  1. For 10+11i3+2i, check that the denominator 3 + 2i is nonzero. Its real and imaginary parts are not both zero, so division is defined. The conjugate rule keeps 3 and reverses the sign of 2i, giving 3 − 2i.
  2. Multiply by 3−2i3−2i: 10+11i3+2i = (10+11i)(3−2i)(3+2i)(3−2i). A nonzero number divided by itself is 1, so this changes the form without changing the value.
  3. Use the conjugate-product rule on the denominator: (3 + 2i)(3 − 2i) = 32 + 22 = 13. The imaginary terms cancel, and replacing i2 with −1 makes the squared terms add.
  4. Distribute in the numerator: (10 + 11i)(3 − 2i) = 30 − 20i + 33i − 22i2 = 52 + 13i. Here i2 = −1 turns −22i2 into +22; then combine matching terms.
  5. Divide each term by the real denominator: 52+13i13 = 5213 + 1313i = 4 + i. Dividing a sum by the same nonzero number divides each term, so this is a + bi form.
  6. Check by multiplying back: (4 + i)(3 + 2i) = 12 + 8i + 3i + 2i2 = 10 + 11i. Distributing and using i2 = −1 recovers the original numerator, which verifies the quotient.
Powers of i repeat every four
  1. For i47, use the four-power rule: 47 = 4 · 11 + 3. Dividing the exponent by 4 leaves remainder 3, so there are 11 complete groups of four and 3 factors left.
  2. Use the exponent rules to separate those groups: i47 = (i4)11 · i3. Multiplying powers adds their exponents, and 4 · 11 + 3 = 47.
  3. Replace each group with 1: (i4)11 · i3 = 111 · i3 = i3. The rule i4 = 1 means complete groups do not change the product.
  4. Use the remainder-3 value: i3 = i2 · i = (−1) · i = −i. This follows from i2 = −1, so i47 = −i.
  5. Check using pairs instead of groups of four: i47 = (i2)23 · i = (−1)23 · i = −i. There are 23 pairs and one factor left because 47 = 2 · 23 + 1. An odd number of negative factors gives a negative product, confirming the answer.
Traps
The number i and the square root of a negative number

Multiplying under the roots before taking out i. −4 · −9 is not 36 = 6. Each root of a negative hides one i, so the product is 2i · 3i = 6i2 = −6. Whenever a negative sits under a square root, take the i out first, and only then multiply.

A complex number as a point in a plane

Calling the imaginary part bi instead of b. The imaginary part of 3 − 4i is −4, a plain real number with its sign. It is not −4i and it is not 4. Leave the i off and keep the minus sign.

Adding and subtracting complex numbers

Changing only the first sign when you subtract. In (8 − 3i) − (2 − 7i), the minus sign outside reaches both terms inside: it makes −2 and it makes +7i. Writing 8 − 3i − 2 − 7i gives 6 − 10i, which is wrong. Before you combine anything, rewrite the line with both signs of the second number changed.

Multiplying complex numbers

The most common mistake is in the Last product. 2i · 4i is 8i2, and 8i2 is −8: a real number with the opposite sign. It is not 8, not 8i and not −8i. Say it each time you reach an i2: the sign flips and the i2 disappears. Then check that your final answer has no i2 left in it.

The conjugate and dividing complex numbers

Writing the bottom as a2 − b2. The product (3 + 2i)(3 − 2i) is 9 + 4 = 13, not 9 − 4 = 5. The last piece is −4i2, and i2 = −1 turns it into +4. To avoid the mistake, write the i2 piece out every time, and remember that the bottom is a sum of two squares, so it can never be negative and can never contain i.

Powers of i repeat every four

Using the wrong number from the division. In 47 ÷ 4 = 11 remainder 3, the 11 only counts full groups of four, and each full group equals 1 and disappears. The answer comes from the remainder, 3, so i47 = i3 = −i. A second form of the same mistake: when the remainder is 0, the answer is 1, not 0. No power of i is ever 0.

Quadratic functions

  1. The parabola and its parts
  2. The vertex form f(x) = a(x - h)^2 + k
  3. From general form to vertex form
  4. Domain and range of a quadratic
  5. Largest and smallest values in a word problem
  6. The intercepts and what the discriminant says

The unit at a glance

Rules
The parabola and its parts

A quadratic function is f(x) = ax2 + bx + c, where a, b and c are numbers and a ≠ 0. Its graph is a parabola.
Vertex: the one turning point. If a > 0 the parabola opens up and the vertex is its lowest point; the y-coordinate of the vertex is the minimum value. If a < 0 it opens down and the vertex is its highest point; the y-coordinate of the vertex is the maximum value.
Axis of symmetry: the vertical line through the vertex. If the vertex is (h, k), the line is x = h.
y-intercept: the one point of the graph with x = 0. x-intercepts: the points of the graph with y = 0. There are two, one or none.

The vertex form f(x) = a(x - h)^2 + k

Vertex form: f(x) = a(x − h)2 + k, where a ≠ 0. The vertex is (h, k) and the axis of symmetry is x = h. If a > 0 the parabola opens up and the vertex is its lowest point. If a < 0 it opens down and the vertex is its highest point. If a is larger than 1 or smaller than −1 the parabola is narrower than y = x2. If a is between −1 and 1 it is wider.

From general form to vertex form

General form: f(x) = ax2 + bx + c, with a ≠ 0. Completing the square turns it into f(x) = a(x + b2a)2 + c − b24a. So the vertex (h, k) has h = −b2a and k = f(h). The number a is the same in both forms.

Domain and range of a quadratic

For a quadratic function with vertex (h, k), written as f(x) = a(x − h)2 + k or as f(x) = ax2 + bx + c, with a ≠ 0:
Domain: (−∞, ∞), every real number.
If a > 0 (the parabola opens up): the range is [k, ∞), and k is the minimum value.
If a < 0 (the parabola opens down): the range is (−∞, k], and k is the maximum value.

Largest and smallest values in a word problem

For f(x) = ax2 + bx + c, the vertex is at x = −b2a. If a < 0, the parabola opens down and f has a maximum value, f(−b2a). If a > 0, the parabola opens up and f has a minimum value, f(−b2a). The two models used most: area of a rectangle = width × length, and revenue = price × number sold.

The intercepts and what the discriminant says

For f(x) = ax2 + bx + c with a ≠ 0:
y-intercept: (0, c), because f(0) = c.
x-intercepts: the real solutions of ax2 + bx + c = 0, which are x = −b±b2−4ac2a, each written as a point (x, 0).
The discriminant D = b2 − 4ac counts them: D > 0 gives two x-intercepts, D = 0 gives one (the vertex, sitting on the x-axis), D < 0 gives none.

Recipes
The parabola and its parts
  1. Use the worked example’s graph of f(x) = −x2 + 2x + 3. By the opening rule, a = −1 makes it open down; the arms fall on both sides.
  2. Use the vertex definition: find the turning point in the picture, (1, 4). Because the graph opens down, its highest output is 4, reached at x = 1.
  3. Use the symmetry rule x = h. The vertex has h = 1, so write x = 1 for the vertical line through it.
  4. Use the y-intercept definition: x = 0. The picture marks (0, 3), so that is the point where the graph meets the y-axis.
  5. Use the x-intercept definition: y = 0. The picture marks (−1, 0) and (3, 0), so both belong in the answer.
  6. Check by substitution into the given formula: f(1) = −1 + 2 + 3 = 4, f(0) = 3, f(−1) = −1 − 2 + 3 = 0, and f(3) = −9 + 6 + 3 = 0. The two x-intercepts also average to (−1 + 3) ÷ 2 = 1, as symmetry requires.
The vertex form f(x) = a(x - h)^2 + k
  1. Match f(x) = −2(x + 3)2 + 5 to the vertex form rule a(x − h)2 + k. Read a = −2 and k = 5 from their positions; keep their signs.
  2. Find h by making the squared bracket zero: x + 3 = 0 gives h = −3. The vertex occurs there because the square contributes zero to the output.
  3. Apply the vertex and symmetry rules: (h, k) gives (−3, 5), and x = h gives x = −3. These locate the turning point and its vertical symmetry line.
  4. Apply the opening and width rules. Since a = −2 is negative, the graph opens down. Since −2 is less than −1, it is narrower than y = x2.
  5. Use vertex form to find nearby points. At x = −2 and x = −4, the bracket is 1 or −1, so its square is 1. Both outputs are −2(1) + 5 = 3, giving (−2, 3) and (−4, 3).
  6. Check by substitution: f(−3) = −2(0)2 + 5 = 5 and f(−4) = −2(−1)2 + 5 = 3. The points on either side have equal heights below the vertex, as the symmetry and downward opening require.
From general form to vertex form
  1. Use the completing-the-square rule on f(x) = 2x2 − 12x + 13. Factor 2 from the two x terms to get 2(x2 − 6x) + 13. Completing the square needs a bare x2 inside the parentheses; the 13 stays outside.
  2. Find the missing term: half of −6 is −3, and (−3)2 = 9. Since (x − 3)2 = x2 − 6x + 9, adding 9 completes the square.
  3. Preserve the value by adding and subtracting the same number: 2(x2 − 6x + 9 − 9) + 13. The added 9 and subtracted 9 cancel.
  4. Rewrite the square and distribute the outside 2: 2(x − 3)2 − 18 + 13. The subtracted 9 becomes −18 because it was inside the factor of 2.
  5. Combine −18 + 13 = −5 to get 2(x − 3)2 − 5. By the vertex form rule, h = 3 and k = −5, so the vertex is (3, −5).
  6. Check by expanding: 2(x − 3)2 − 5 = 2(x2 − 6x + 9) − 5 = 2x2 − 12x + 13. The original formula is recovered. The shortcut also gives h = −(−12)2×2 = 3 and k = f(3) = −5.
Domain and range of a quadratic
  1. Apply the unrestricted-domain rule to f(x) = −2x2 + 12x − 5. No input restriction is given, and squaring, multiplying and adding allow every real input, so the domain is (−∞, ∞).
  2. Use the earlier vertex shortcut h = −b2a. Here a = −2 and b = 12, so h = −122×(−2) = 3. This locates the input where the graph turns.
  3. Use k = f(h) to find the turning height: k = f(3) = −2(3)2 + 12(3) − 5 = 13. The vertex is (3, 13).
  4. Apply the range rule for a < 0. Since a = −2, the graph opens down and every output is at most 13. Write y ≤ 13, or (−∞, 13], and name the maximum value as 13 at x = 3. If a were positive, the graph would open up, the range would be [k, ∞), and k would be the minimum value.
  5. Check with vertex form: f(x) = −2(x − 3)2 + 13. A square is never negative, so −2(x − 3)2 is 0 or less, and the formula never exceeds 13. At x = 3 the square is 0, so 13 is reached. That verifies the bound and explains the closed bracket at 13.
Largest and smallest values in a word problem
  1. Use the fence constraint to name the input. Let w be each width of the dog run. The three fenced sides total 48 feet, so the remaining length is 48 − 2w. Both dimensions must be positive: 0 < w < 24.
  2. Use the rectangle area rule, width × length: A(w) = w(48 − 2w). Distribute to get −2w2 + 48w, so a = −2 and b = 48 for the vertex rule.
  3. Apply the opening rule. Since a = −2 is negative, the vertex gives a maximum, which is the largest area the question asks for.
  4. Use the vertex input rule: w = −b2a = −482×(−2) = 12. Check the constraint 0 < 12 < 24; this width is allowed.
  5. Use the length constraint again: 48 − 2(12) = 24 feet. Use the area rule: 12 × 24 = 288 square feet. State both dimensions and the area, because the input and the output answer different parts of the question.
  6. Check the model and maximum: 12 + 12 + 24 = 48 feet of fence. Completing the square gives A(w) = −2(w − 12)2 + 288. A square is never negative, so −2(w − 12)2 is 0 or less, and the area cannot exceed 288. The allowed width 12 makes that square zero, so 288 square feet is reached.
The intercepts and what the discriminant says
  1. Match f(x) = x2 − 2x − 8 to ax2 + bx + c. Read a = 1, b = −2 and c = −8, keeping the signs because the discriminant and formula use those signed numbers.
  2. Apply the y-intercept rule by setting x = 0: f(0) = −8. Write (0, −8), because every point on the y-axis has input zero.
  3. Use D = b2 − 4ac: D = (−2)2 − 4(1)(−8) = 4 + 32 = 36. The discriminant rule predicts two x-intercepts because D > 0. If D were 0, the graph would touch the x-axis once, at the vertex. If D were negative, it would miss the x-axis, and the formula would give two complex roots using i.
  4. Use the x-intercept rule by setting the output to zero: x2 − 2x − 8 = 0. Apply the quadratic formula: x = −(−2)±362(1) = 2±62.
  5. Work both signs in the formula: (2 + 6) ÷ 2 = 4 and (2 − 6) ÷ 2 = −2. Write the intercepts as (4, 0) and (−2, 0), since points on the x-axis have output zero.
  6. Check by substitution: f(4) = 16 − 8 − 8 = 0, f(−2) = 4 + 4 − 8 = 0, and f(0) = −8. These verify every intercept, and the two distinct x-intercepts match the positive discriminant.
Traps
The parabola and its parts

Wrong: a maximum is the point (h, k). Right: the vertex is (h, k); the maximum is the height k.

The vertex form f(x) = a(x - h)^2 + k

Wrong: read the sign inside the bracket as h. Right: choose the x that makes the bracket zero.

From general form to vertex form

Wrong: move the subtracted square outside unchanged. Right: multiply it by a as it leaves the bracket.

Domain and range of a quadratic

Wrong: start the range at h. Right: use the vertex height k and include it.

Largest and smallest values in a word problem

Wrong: report only the vertex input. Right: give the requested dimensions or price and the largest or smallest amount, with units.

The intercepts and what the discriminant says

Wrong: square a negative coefficient without parentheses. Right: b2 squares the whole signed value; compute −4ac separately.

Power functions and polynomial functions

  1. Power functions
  2. End behavior of a power function
  3. Polynomial vocabulary
  4. End behavior of a polynomial comes from its leading term
  5. Intercepts of a polynomial
  6. Turning points

The unit at a glance

Rules
Power functions

A power function is f(x) = kxp, where k is a fixed number other than 0 and p is a fixed number. The graph families below use whole-number powers p (0, 1, 2, 3, ...). Polynomial vocabulary later compares these with negative and fractional powers.
For a whole-number p: if p is even, f(−x) = f(x): the inputs x and −x give the same output, and the graph mirrors across the y-axis. If p is odd, f(−x) = −f(x): x and −x give opposite outputs, and the graph looks the same after a half turn around (0, 0).

End behavior of a power function

For f(x) = kxp with p = 1, 2, 3, ... and k ≠ 0:
Right arm: k > 0 gives f(x) → ∞ as x → ∞; k < 0 gives f(x) → −∞ as x → ∞.
Left arm: if p is even it matches the right arm; if p is odd it points the opposite way.

Polynomial vocabulary

A polynomial is a sum of terms a·xn: each coefficient a is a real number and each power n is a whole number (0, 1, 2, 3, ...). Standard form lists the powers from highest to lowest: f(x) = anxn + ... + a2x2 + a1x + a0, with an ≠ 0; every polynomial except 0 itself can be written this way. The degree is n, the highest power. The leading term is anxn. The leading coefficient is an. The constant term is a0. The zero polynomial, 0, has no degree and no leading term.

End behavior of a polynomial comes from its leading term

If f(x) = anxn + (terms with lower powers of x), where an ≠ 0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y = anxn.
n even, an > 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → ∞ (both arms up).
n even, an < 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → −∞ (both arms down).
n odd, an > 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → ∞ (left arm down, right arm up).
n odd, an < 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞ (left arm up, right arm down).

Intercepts of a polynomial

y-intercept: the point (0, f(0)). When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c) = 0. Zero product property: if A · B = 0, then A = 0 or B = 0.

Turning points

A turning point is a point where the graph changes from rising to falling (a peak) or from falling to rising (a valley), read left to right.
A polynomial of degree n, where n is 1 or more, has at most n − 1 turning points.
Backward: a polynomial that is not constant and whose graph has t turning points has degree at least t + 1.

Recipes
Power functions
  1. For f(x) = 2x3, match the power-function form f(x) = kxp: k = 2 is the number in front and p = 3 is the power. The 2 multiplies x3; it is not part of the power.
  2. Use the odd-power rule: p = 3 is odd, so opposite inputs give opposite outputs. Start from the shape of y = x3, because cubing a negative input keeps its minus sign.
  3. Use substitution and the order of operations to make the table. Cube each input before multiplying by 2: f(−2) = 2(−8) = −16, f(−1) = 2(−1) = −2, f(0) = 0, f(1) = 2 and f(2) = 16.
  4. Plot (−2, −16), (−1, −2), (0, 0), (1, 2) and (2, 16) and join them smoothly in the shape of y = x3. Each output is 2 times the output of x3 at the same input, so the graph is y = x3 stretched to twice the height.
  5. Check with the odd-power rule: the outputs at −2 and 2 are −16 and 16, and those at −1 and 1 are −2 and 2. Each pair is opposite. Also f(1) = 2 equals k, because 1 to any power is 1.
End behavior of a power function
  1. For f(x) = −2x5, match f(x) = kxp: k = −2 and p = 5. The end-behavior rule applies because p is a positive whole number and k is not 0.
  2. Apply the right-arm rule first. k = −2 is negative, so as x → ∞, f(x) → −∞. The reason: a large positive input has a large positive fifth power, and multiplying by −2 makes it negative.
  3. Apply the left-arm rule. p = 5 is odd, so the left arm points the opposite way from the right arm: as x → −∞, f(x) → ∞. The reason: a large negative input has a large negative fifth power, and multiplying by −2 makes it positive.
  4. Write the answer in arrow notation, one line for each direction of x. In arrow notation, x → ∞ means the input moves far to the right without stopping, and f(x) → −∞ means the outputs drop without stopping. So: as x → −∞, f(x) → ∞ (left arm up), and as x → ∞, f(x) → −∞ (right arm down).
  5. Check by substitution: f(10) = −2 · 100,000 = −200,000 and f(−10) = −2 · (−100,000) = 200,000. Their signs agree with the two end rules. These values check the arithmetic; the rules describe what happens as inputs grow without bound.
Polynomial vocabulary
  1. For g(x) = 4x2 − 9 + 3x5 − x, apply the polynomial definition. The powers of x are 2, 0, 5 and 1, all whole numbers, and each coefficient is real, so g is a polynomial. No brackets need multiplying out, and no two terms share a power of x, so nothing needs combining.
  2. Use the term and coefficient definitions. Keep each minus sign with its term: 4x2, −9, 3x5, −x have coefficients 4, −9, 3, −1. The term −x means −1 times x, and the constant −9 has power 0.
  3. Use the degree rule to choose the highest power with a nonzero coefficient: 5. Its term 3x5 is the leading term, and 3 is the leading coefficient. Position in the written formula does not determine the degree.
  4. Use standard form to reorder the terms from highest power to lowest: g(x) = 3x5 + 4x2 − x − 9. Addition allows this rearrangement when each term keeps its sign.
  5. Check the rearrangement term by term: the same four signed terms occur once each. Then substitute x = 2 into both orders: 4(2)2 − 9 + 3(2)5 − 2 = 16 − 9 + 96 − 2 = 101 and 3(2)5 + 4(2)2 − 2 − 9 = 96 + 16 − 2 − 9 = 101. Matching outputs support the check; keeping every signed term is what makes the two forms equal.
End behavior of a polynomial comes from its leading term
  1. For f(x) = 50x2 − x3 + 100, use the degree rule to find the highest power, 3. The leading term is −x3 and its coefficient is −1, even though it is written in the middle.
  2. Apply the leading-term rule for end behavior. Use −x3 to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.
  3. Apply the power-function rules to −x3. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.
  4. Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.
Intercepts of a polynomial
  1. For f(x) = 2x2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
  2. Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2x2 − 4x − 30 = 0. Pull out the common factor 2 to get 2(x2 − 2x − 15) = 0; distributing 2 gives back all three terms.
  3. Factor x2 − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so x2 − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: x2 − 5x + 3x − 15 = x2 − 2x − 15.
  4. Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
  5. Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.
Turning points
  1. Use the turning-point definition on the graph described in the example. Read left to right: falling changes to rising at (−2, −13), rising changes to falling at (0, 3), and falling changes to rising at (2, −13). Count these direction changes, not the ends or a flat spot that keeps rising.
  2. Count t = 3 turns. Apply the bound t ≤ n − 1: 3 ≤ n − 1 gives n ≥ 4 after adding 1 to both sides. This is a lower bound, because a degree can allow more turns than a graph actually has.
  3. Use the end-behavior rule from the earlier lesson. Both ends point up, so the degree is even and the leading coefficient is positive. The smallest even degree allowed by the turn count is 4.
  4. Check that degree 4 can fit the stated shape with the example’s formula f(x) = x4 − 8x2 + 3. Its degree is 4 and its leading coefficient 1 is positive, so it allows at most 3 turns and both arms point up. Multiplying out (x2 − 4)2 − 13 gives x4 − 8x2 + 16 − 13 = x4 − 8x2 + 3, so f(x) = (x2 − 4)2 − 13. A square is never negative and is 0 only where x2 − 4 = 0, at x = −2 and x = 2, so the lowest outputs are −13 there. Between them, x2 − 4 runs from 0 down to −4 at x = 0 and back to 0, so its square climbs from 0 to 16 and falls back: the graph rises to (0, 3) and falls again. Outside −2 and 2 the square only grows, so both arms rise.
  5. Finish the check by substitution: f(−2) = 16 − 32 + 3 = −13, f(0) = 3 and f(2) = 16 − 32 + 3 = −13. This degree-4 polynomial has the three stated turns and both arms up, so degree 4 is possible as well as being the lower bound.
Traps
Power functions

Letting the power grab the number in front. In f(x) = −3x2 the power 2 belongs to x alone. At x = 2, square first, 22 = 4, then multiply by −3 to get −12. Squaring −3 · 2 = −6 gives 36, which is the output of a different function, (−3x)2. Put the input in, do the power, and only then multiply by k.

End behavior of a power function

Reading −x4 as (−x)4. The power touches only x. The minus sign in front is k = −1 and is applied last. So −x4 has both arms down, while (−x)4 = x4 has both arms up. Before deciding anything, write k out with its sign: k = −1, k = −2, and so on.

Polynomial vocabulary

The most common mistake is to take the first term on the page as the leading term, or to take the biggest number as the leading coefficient. In 5 + 2x − 3x4 the leading term is −3x4, not 5, and the leading coefficient is −3, sign included. Always find the highest power first. The order on the page and the size of the numbers decide nothing.

End behavior of a polynomial comes from its leading term

Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

Intercepts of a polynomial

The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.

Turning points

Reading 'at most' as 'exactly'. A degree 3 polynomial does not have to have 2 turning points: y = x3 has none. A graph with 3 turning points does not have to come from degree 4: it could come from degree 6. Going from a formula of degree 1 or more, say 'at most n − 1 turning points'. Going from a graph that is not a flat line, say 'degree at least t + 1'.

Graphs of polynomial functions

  1. Zeros from the factored form
  2. Multiplicity and what the graph does at a zero
  3. The Intermediate Value Theorem
  4. Sketching a polynomial from its features
  5. Writing a formula from a graph
  6. Largest and smallest values on an interval

The unit at a glance

Rules
Zeros from the factored form

If f(x) = (x − c) · (other factors), then f(c) = 0: c is a zero of f, and the graph meets the x-axis at the point (c, 0). In factored form the zeros are exactly the inputs that make at least one factor 0, so x + c gives −c, a lone x gives 0, and a factor that is a nonzero number gives none.

Multiplicity and what the graph does at a zero

Let c be a zero of a polynomial f that is not the constant 0. If the factor (x − c) appears exactly m times in the factored form of f(x), then c has multiplicity m. Odd m: the graph crosses the x-axis at x = c. Even m: the graph touches the x-axis at x = c and turns back. The larger m is, the flatter the graph lies near x = c.

The Intermediate Value Theorem

Intermediate Value Theorem, zero version: let f be a polynomial and let a < b. If f(a) and f(b) have opposite signs, then there is at least one number c with a < c < b and f(c) = 0. General version: f takes every value between f(a) and f(b) at some input between a and b.

Sketching a polynomial from its features

For a polynomial f that is not constant, written in factored form: the zeros cut the x-axis into intervals, and on each interval f(x) keeps one sign, the sign of f at any test point inside it. At a zero of odd multiplicity the graph crosses the x-axis; at a zero of even multiplicity it touches and turns back. The y-intercept is (0, f(0)). The two arms follow the leading term.

Writing a formula from a graph

If all of a polynomial's zeros are real, at c1, c2, ... with multiplicities m1, m2, ..., so the graph shows every one, then f(x) = a(x − c1)m1(x − c2)m2··· with a ≠ 0. Lowest multiplicity that fits: a straight crossing is 1, a touch and turn is 2, a flattened crossing is 3. To find a, substitute one point (x0, y0) that is not on the x-axis and solve the equation for a.

Largest and smallest values on an interval

On a closed interval a ≤ x ≤ b, a polynomial always has a global maximum and a global minimum. Each one sits at a local maximum or local minimum inside the interval, or at an endpoint (x = a or x = b). The maximum or minimum is the output, the y-value. The place where it happens is the input, the x-value.

Recipes
Zeros from the factored form
  1. Use the zero-product rule on f(x) = −2x(x + 4)(x − 1): a product is zero exactly when a factor is zero. This formula is already one product, so its factors can be solved separately.
  2. Skip −2: it is a number other than zero, so it can never make the product zero. Set the factors containing x equal to zero: x = 0, x + 4 = 0 and x − 1 = 0.
  3. Solve each equation by keeping both sides equal. Subtract 4 in x + 4 = 0 to get x = −4; add 1 in x − 1 = 0 to get x = 1. The lone x gives x = 0.
  4. Use the intercept rule: each real zero c gives the point (c, 0). List the distinct zeros −4, 0 and 1, and plot (−4, 0), (0, 0) and (1, 0). Every factor containing x has been used, so this list is complete.
  5. Check by substitution in the original product: f(−4) = −2 · (−4) · 0 · (−5) = 0, f(0) = −2 · 0 · 4 · (−1) = 0 and f(1) = −2 · 1 · 5 · 0 = 0. Each proposed zero makes a factor zero.
Multiplicity and what the graph does at a zero
  1. Use the zero-product rule on f(x) = x(x − 3)2(x + 2)3. Solve x = 0, x − 3 = 0 and x + 2 = 0 to get the zeros 0, 3 and −2. These are the inputs where a factor becomes zero.
  2. Use the multiplicity rule: count how often each zero’s factor appears. The lone x counts once, (x − 3)2 counts twice and (x + 2)3 counts three times. Thus 0 has multiplicity 1, 3 has multiplicity 2 and −2 has multiplicity 3.
  3. Apply odd crosses and even touches. At 0, multiplicity 1 gives a crossing; at 3, multiplicity 2 gives a touch and turn; at −2, multiplicity 3 gives a flattened crossing. Odd powers change sign across a zero; even powers keep the same sign.
  4. Check the count using the product’s degree: x · x2 · x3 = x6, and 1 + 2 + 3 = 6. All factors here are powers of x − c, so their multiplicities account for the whole degree.
  5. Check the predicted crossings with signs on both sides, without passing another zero. Around −2, f(−3) = 108 and f(−1) = −16 have opposite signs. Around 0, f(−1) = −16 and f(1) = 108 have opposite signs. Around 3, f(2) = 128 and f(4) = 864 are both positive, which agrees with a touch and turn.
The Intermediate Value Theorem
  1. Check the Intermediate Value Theorem’s condition for f(x) = x3 + x − 3 on 1 ≤ x ≤ 2. It is a polynomial, so its graph is unbroken throughout this interval.
  2. Evaluate both endpoints by substitution: f(1) = 1 + 1 − 3 = −1 and f(2) = 8 + 2 − 3 = 7. These outputs put one endpoint below the axis and the other above it.
  3. Apply the theorem: the opposite signs guarantee at least one zero between 1 and 2. They do not identify an exact zero or prove there is only one.
  4. To narrow the interval to consecutive tenths, test f(1.1) = −0.569, f(1.2) = −0.072 and f(1.3) = 0.497. Apply the same sign-change rule to 1.2 and 1.3: at least one zero lies between them. Matching signs at 1.1 and 1.2 alone give no conclusion about that smaller interval.
  5. Check with the theorem’s general version: f(x) = 0 means x3 + x = 3. At 1.2, x3 + x = 2.928; at 1.3, it is 3.497. The unbroken graph reaches 3 between those inputs, confirming the same interval.
Sketching a polynomial from its features
  1. Use the zero-product rule on f(x) = (x + 1)(x − 2)2. Solving x + 1 = 0 and x − 2 = 0 gives −1 and 2. Use the multiplicity rule to mark a crossing at (−1, 0) and a touch and turn at (2, 0): their powers are odd and even, respectively.
  2. Use the y-intercept rule, (0, f(0)): f(0) = (0 + 1)(0 − 2)2 = 4. Plot (0, 4), since every point on the y-axis has input zero.
  3. Use the leading-term rule to find both ends. Multiplying the leading pieces gives x · x2 = x3. Its odd degree and positive coefficient mean the left end goes down and the right end goes up.
  4. Use the interval-sign rule: once all real zeros are listed, one test input gives the sign on each interval. Compute f(−2) = −16, reuse f(0) = 4 and compute f(3) = 4. The graph is below the axis for x < −1 and above it for −1 < x < 2 and x > 2.
  5. Draw one smooth, unbroken curve through the marked points. Also plot f(1) = 2 to guide the middle. Cross at −1, pass through (0, 4) and (1, 2), touch at 2, then rise through (3, 4). The multiplicity and sign rules keep each stretch on the correct side.
  6. Check from right to left using the same rules. The right end is positive. Passing the even zero 2 keeps that sign; passing the odd zero −1 changes it to negative. These signs agree with the test values and the left end. Check that the sketch includes both intercepts and (0, 4).
Writing a formula from a graph
  1. Read the example’s zeros and behavior: it crosses straight through at −2 and touches and turns at 1. Use the rule’s smallest fitting multiplicities, 1 and 2, because the question asks for the lowest degree.
  2. Use the factor rule: a zero c supplies x − c. Write f(x) = a(x + 2)(x − 1)2. The factors place the zeros, their powers give the required behavior, and a scales the other heights.
  3. Use the point (0, 4) to find a. Substitute both coordinates: 4 = a(0 + 2)(0 − 1)2 = 2a. A point off the x-axis makes the factor product nonzero, so it determines a.
  4. Divide both sides by 2 to keep the equation balanced: a = 2. Write f(x) = 2(x + 2)(x − 1)2. Its degree is 1 + 2 = 3, the lowest allowed by the crossing and touch.
  5. Check the saved point: f(2) = 2 · 4 · 1 = 8, matching (2, 8). The factors give zeros −2 and 1 with the required behavior. The leading term 2x3 gives a left end down and a right end up, so both ends agree too.
Largest and smallest values on an interval
  1. Use the closed-interval rule on f(x) = x3 − 12x for −3 ≤ x ≤ 5. Both endpoints are included, so compare them with every interior local maximum and minimum. These are the possible places for a global extreme value.
  2. Read the marked hilltop (−2, 16) and valley (2, −16) in the example. By the local-extreme rule, a hilltop is highest nearby and a valley is lowest nearby. A table alone cannot prove that no turning point lies between its samples; use the marked features and the formula check below.
  3. Evaluate all four candidates by substitution: f(−3) = −27 + 36 = 9, f(−2) = −8 + 24 = 16, f(2) = 8 − 24 = −16 and f(5) = 125 − 60 = 65. The rule compares outputs, so keep each height paired with its input.
  4. Compare the heights: 65 > 16 > 9 > −16. The local maximum is 16 at x = −2 and the local minimum is −16 at x = 2. The global maximum is 65 at x = 5; the global minimum is −16 at x = 2.
  5. Check the bounds over the whole interval using the example’s factorizations. Since x + 4 is positive there and a square is never negative, f(x) + 16 = (x − 2)2(x + 4) ≥ 0. Thus f(x) ≥ −16. Also 65 − f(x) = (5 − x)(x2 + 5x + 13) ≥ 0: the first factor is never negative, and the second equals (x + 2.5)2 + 6.75, which is positive. Thus f(x) ≤ 65. Substitution shows both bounds are reached. Near −2, 16 − f(x) = (x + 2)2(4 − x) ≥ 0, confirming the local maximum.
Traps
Zeros from the factored form

Wrong: copy the sign inside a factor. Right: solve the factor equal to zero, then substitute to check.

Multiplicity and what the graph does at a zero

Wrong: cross at every zero. Right: cross at odd multiplicity and touch at even multiplicity.

The Intermediate Value Theorem

Wrong: matching endpoint signs mean no zero. Right: matching signs give no conclusion.

Sketching a polynomial from its features

Wrong: switch sides at every zero. Right: switch at odd multiplicity and keep the side at even multiplicity.

Writing a formula from a graph

Wrong: stop at the factors and assume the scale is one. Right: use a point off the x-axis to solve for the scale.

Largest and smallest values on an interval

Wrong: choose the highest hill and ignore the ends. Right: compare every hilltop and valley inside the interval with every included end.

Dividing polynomials

  1. Polynomial long division
  2. Dividend = divisor times quotient plus remainder
  3. Synthetic division by x - c
  4. Dividing by a divisor of degree two
  5. What a zero remainder means

The unit at a glance

Rules
Polynomial long division

Divide, multiply, subtract, bring down. Write powers in descending order with zero placeholders. Stop only when every term is down and the remainder is zero or has lower degree than the divisor.

Dividend = divisor times quotient plus remainder

The division algorithm: for a dividend P(x) and a divisor D(x) that is not 0, there is exactly one quotient Q(x) and exactly one remainder R(x) with P(x) = D(x) · Q(x) + R(x), where R(x) is 0 or has a lower degree than D(x). Dividing both sides by D(x) gives the fraction form: P(x)D(x) = Q(x) + R(x)D(x), wherever D(x) ≠ 0.

Synthetic division by x - c

This short table works for a divisor of the form x − c. Write c in a box and the coefficients of the dividend in a row, in descending powers, with 0 for every missing power. Bring down the first coefficient. Then repeat: multiply the newest bottom number by c, write the product under the next coefficient, and add the column. The last bottom number is the remainder. The numbers before it are the coefficients of the quotient, whose degree is one less than the degree of the dividend when the dividend has degree 1 or more.

Dividing by a divisor of degree two

Use long division for a quadratic divisor. Stop when all terms are down and the remainder is zero or has degree below two. The remainder may be mx + n, a constant or zero.

What a zero remainder means

If a division gives remainder 0, the divisor is a factor of the dividend, and dividend = divisor × quotient. If the remainder is not 0, the divisor is not a factor. For a divisor x − c, with P(x) standing for the dividend and Q(x) for the quotient: remainder 0 means P(x) = (x − c) · Q(x).

Recipes
Polynomial long division
  1. Use the descending-powers rule to line up 2x2 − 5x − 1 and x − 3. Every power is present, so no zero placeholder is needed; matching powers keeps subtraction in the right columns.
  2. Use the divide step: 2x2 ÷ x = 2x. Write 2x in the quotient because multiplying x by 2x will cancel the dividend’s highest power.
  3. Use the multiply step on the whole divisor: 2x(x − 3) = 2x2 − 6x. The distributive rule includes both terms because the quotient counts copies of the whole divisor.
  4. Use the subtract step: (2x2 − 5x) − (2x2 − 6x) = x. Change both signs in the row being subtracted; −5x + 6x = x. Bring down −1 to use the next dividend term, giving x − 1.
  5. Repeat divide, multiply, subtract: x ÷ x = 1, so add 1 to the quotient. Multiply 1(x − 3) = x − 3. Subtract (x − 1) − (x − 3) = 2 because −1 + 3 = 2.
  6. Use the stopping rule: every term is down and the remainder 2 has degree 0, below the divisor’s degree 1. Stop with quotient 2x + 1 and remainder 2.
  7. Check with dividend = divisor × quotient + remainder: (x − 3)(2x + 1) + 2 = 2x2 + x − 6x − 3 + 2 = 2x2 − 5x − 1. Rebuilding every term confirms the division.
Dividend = divisor times quotient plus remainder
  1. Label the pieces in P = D × Q + R: P = 2x3 − 3x2 − 8x + 7, D = x − 3, Q = 2x2 + 3x + 1, R = 10. These are the reported dividend, divisor, quotient and remainder to check.
  2. Use the remainder-degree rule: 10 has degree 0, below the degree 1 of x − 3. This makes 10 an allowed remainder, though the multiplication must also agree.
  3. Use the distributive rule to multiply the entire divisor and quotient: (x − 3)(2x2 + 3x + 1) = 2x3 + 3x2 + x − 6x2 − 9x − 3 = 2x3 − 3x2 − 8x − 3. Combine like powers so each coefficient can be compared.
  4. Use P = D × Q + R to add the remainder: 2x3 − 3x2 − 8x − 3 + 10 = 2x3 − 3x2 − 8x + 7. Every coefficient matches P, proving the reported division. Write P = (x − 3)(2x2 + 3x + 1) + 10.
  5. Use the fraction form of the rule by dividing both sides of P = D × Q + R by D: 2x3−3x2−8x+7x−3 = 2x2 + 3x + 1 + 10x−3. Require x ≠ 3 because division by zero is undefined.
  6. Check both forms at the allowed input x = 2. The dividend is 16 − 12 − 16 + 7 = −5; D × Q + R is (−1)(15) + 10 = −5. The fraction form gives −5−1 = 15 + 10−1 = 5. This spot check supports the coefficient check above.
Synthetic division by x - c
  1. Use the x − c rule: the divisor x − 3 has c = 3. Put 3 in the box: x = 3 makes the divisor zero, since 3 − 3 = 0. Its x coefficient is 1, so the quotient needs no scaling.
  2. Use the coefficient-order rule: write 2, −7, 4, 5 for 2x3 − 7x2 + 4x + 5. Every power is present, so no zero is needed; each column keeps its power of x.
  3. Use the bring-down rule: put 2 below the first coefficient. The leading coefficient stays 2 because the divisor starts with 1x.
  4. Use multiply, then add: 2 × 3 = 6; write 6 under −7 and add −7 + 6 = −1. This produces the next quotient coefficient by the table’s rule.
  5. Repeat multiply, then add with the newest bottom number: (−1) × 3 = −3; write −3 under 4 and add 4 − 3 = 1. Advancing one column gives the next quotient coefficient.
  6. Repeat once more: 1 × 3 = 3; write 3 under 5 and add 5 + 3 = 8. The last-number rule makes 8 the remainder because this is the constant column.
  7. Use the quotient-degree rule to read the bottom row 2, −1, 1, 8. Start one power below the cubic dividend: the quotient is 2x2 − x + 1. Keep the remainder 8 separate.
  8. Check with P = D × Q + R: (x − 3)(2x2 − x + 1) + 8 = 2x3 − 7x2 + 4x − 3 + 8 = 2x3 − 7x2 + 4x + 5. Rebuilding the dividend checks every coefficient.
Dividing by a divisor of degree two
  1. Use the quadratic-divisor rule to choose long division for (2x3 + 5x2 + x + 4) ÷ (x2 + x − 2). Both polynomials have every power in descending order, so no zero placeholders are needed.
  2. Use the leading-term division rule: 2x3 ÷ x2 = 2x. Write 2x in the quotient because its product with x2 cancels the cubic term.
  3. Use the distributive rule to multiply the whole divisor: 2x(x2 + x − 2) = 2x3 + 2x2 − 4x. Every divisor term must be included.
  4. Use the subtraction rule on the whole row: (2x3 + 5x2 + x) − (2x3 + 2x2 − 4x) = 3x2 + 5x. In particular, x − (−4x) = 5x. Bring down +4 to include the last dividend term.
  5. Apply the degree rule: 3x2 + 5x + 4 has the same degree as the divisor, so divide again. Use 3x2 ÷ x2 = 3 and multiply 3(x2 + x − 2) = 3x2 + 3x − 6 to cancel the next highest power.
  6. Use whole-row subtraction: (3x2 + 5x + 4) − (3x2 + 3x − 6) = 2x + 10. Subtracting −6 adds 6, so the constant is 10.
  7. Use the stopping rule: all terms are down and 2x + 10 has degree 1, below 2. The quotient is 2x + 3 and the remainder is 2x + 10; a remainder can contain x when the divisor is quadratic.
  8. Check with P = D × Q + R: (x2 + x − 2)(2x + 3) = 2x3 + 5x2 − x − 6. Add 2x + 10 to get 2x3 + 5x2 + x + 4. Every term matches the dividend.
What a zero remainder means
  1. Use the synthetic-division rule to test the proposed factor x − 4 of x3 + 3x2 − 18x − 40. Put 4 in the box: x = 4 makes the divisor zero, since 4 − 4 = 0. Write the complete coefficient row 1, 3, −18, −40.
  2. Use bring down, multiply, add: bring down 1, multiply 1 × 4 = 4, and add 3 + 4 = 7. This starts the quotient row one power below the cubic dividend.
  3. Repeat multiply, add: 7 × 4 = 28 and −18 + 28 = 10; then 10 × 4 = 40 and −40 + 40 = 0. Using each newest bottom number gives the bottom row 1, 7, 10, 0.
  4. Use the zero-remainder rule: the last entry is 0, so x − 4 is a factor. The other entries give quotient x2 + 7x + 10. Write x3 + 3x2 − 18x − 40 = (x − 4)(x2 + 7x + 10) because the division identity has no leftover term.
  5. Use the quadratic factoring rule: find two numbers whose product is 10 and whose sum is 7. They are 2 and 5, so x2 + 7x + 10 = (x + 2)(x + 5). Keep the original divisor to get (x − 4)(x + 2)(x + 5); every factor is linear.
  6. Check by multiplication: (x − 4)(x + 2) = x2 − 2x − 8. Then (x2 − 2x − 8)(x + 5) = x3 + 5x2 − 2x2 − 10x − 8x − 40 = x3 + 3x2 − 18x − 40. This recovers every coefficient of the original polynomial.
Traps
Polynomial long division

Wrong: change only the first sign when subtracting a row. Right: change every sign, then add.

Dividend = divisor times quotient plus remainder

Wrong: check with divisor × quotient alone. Right: add the remainder too, including its sign.

Synthetic division by x - c

Wrong: omit a missing power from the coefficient row. Right: write a zero in that place before starting.

Dividing by a divisor of degree two

Wrong: subtract only two terms of a three-term product. Right: change all three signs, then add.

What a zero remainder means

Wrong: give only the factored quotient. Right: include the divisor too, so the product rebuilds the original polynomial.

Zeros of polynomial functions

  1. The Remainder Theorem
  2. The Factor Theorem
  3. The Rational Zero Theorem
  4. Finding every zero, step by step
  5. The Fundamental Theorem of Algebra and complex conjugate pairs
  6. Building a polynomial from its zeros
  7. Descartes' Rule of Signs

The unit at a glance

Rules
The Remainder Theorem

Remainder Theorem: if a polynomial f(x) is divided by x − c, the remainder is f(c).
In symbols, for any number c: f(x) = (x − c) · q(x) + r, and r = f(c).

The Factor Theorem

Factor Theorem. For a polynomial f(x) and a number c: x − c is a factor of f(x) exactly when f(c) = 0. When that happens, f(x) = (x − c)·q(x), where q(x) is the quotient from dividing f(x) by x − c.

The Rational Zero Theorem

Let f(x) = anxn + ... + a1x + a0, where every coefficient is an integer, an ≠ 0 and a0 ≠ 0. If pq is a rational zero of f written in lowest terms, then p is a factor of the constant term a0 and q is a factor of the leading coefficient an. So every rational zero is on the list ± factorofa0factorofan.

Finding every zero, step by step

If c is a zero of f, then f(x) = (x − c)·q(x), and the zeros of f are c together with the zeros of the quotient q(x). Take f with integer coefficients and a nonzero constant term (if the constant term is 0, factor out x and work with what is left). Every rational zero of a quotient is also a rational zero of f, so keep testing the same candidates ±factoroftheconstanttermfactoroftheleadingcoefficient of f on each quotient. When the quotient is a quadratic, the quadratic formula gives its last two zeros. If no candidate is a zero of a quotient of degree 3 or more, that quotient has no rational zero, and its zeros need another method.

The Fundamental Theorem of Algebra and complex conjugate pairs

Fundamental Theorem of Algebra: every polynomial of degree n ≥ 1 has at least one zero among the complex numbers, so it has exactly n zeros counted with multiplicity; written as a product, f(x) = an(x − c1)(x − c2) ··· (x − cn), where an is the leading coefficient (the Linear Factorization Theorem).
Complex conjugate pairs: if every coefficient of f is real and a + bi with b ≠ 0 is a zero, then its conjugate a − bi is also a zero.

Building a polynomial from its zeros

A polynomial of degree n whose zeros are exactly c1, c2, ..., cn, each listed as often as its multiplicity, has the form f(x) = a(x − c1)(x − c2) ... (x − cn), where a is any nonzero number. With real coefficients, a complex conjugate pair p + qi and p − qi contributes the factor (x − p)2 + q2. A point (x0, y0) on the graph that is not a zero fixes a: solve y0 = a(x0 − c1)(x0 − c2) ... (x0 − cn).

Descartes' Rule of Signs

Descartes' Rule of Signs. Let f(x) be a polynomial with real coefficients, written from the highest power down, with missing terms skipped. (1) The number of positive real zeros equals the number of sign changes in f(x), or is less than that by an even number. (2) The number of negative real zeros equals the number of sign changes in f(−x), or is less than that by an even number. Zeros are counted with multiplicity, and a zero at x = 0 belongs to neither group.

Recipes
The Remainder Theorem
  1. For f(x) = 2x3 − 5x2 + x − 4, find f(3). By the Remainder Theorem, use the divisor x − 3 and c = 3: the output equals the remainder.
  2. Write 2, −5, 1, −4 in descending powers. Synthetic division needs a place for every power so the columns line up; here none is missing.
  3. Bring down 2. Follow the synthetic division rule, multiply by 3 then add: −5 + 6 = 1, then 1 + 3 = 4, then −4 + 12 = 8. Each new bottom entry supplies the next multiplication.
  4. Read the last entry as the remainder. The Remainder Theorem gives f(3) = 8; the other entries give the quotient 2x2 + x + 4.
  5. Check by substitution into the original: 2·33 − 5·32 + 3 − 4 = 54 − 45 + 3 − 4 = 8. Substitution and division must agree because both compute f(3).
The Factor Theorem
  1. For f(x) = x3 − 2x2 − 19x + 20, test x − 5. Set x − 5 = 0 to get c = 5, the input the Factor Theorem requires.
  2. Use coefficients 1, −2, −19, 20. Synthetic division keeps one entry per power. Bring down 1, then multiply by 5 and add: −2 + 5 = 3, −19 + 15 = −4, and 20 − 20 = 0.
  3. The Remainder Theorem gives f(5) = 0. The Factor Theorem therefore confirms x − 5 as a factor. Read the other entries one degree lower to get f(x) = (x − 5)(x2 + 3x − 4).
  4. Factor the quadratic using two numbers with product −4 and sum 3: 4 and −1. The product-and-sum rule gives x2 + 3x − 4 = (x + 4)(x − 1), so keep all factors: f(x) = (x − 5)(x + 4)(x − 1).
  5. Check by expanding the factors to recover x3 − 2x2 − 19x + 20; the distributive rule verifies the whole polynomial. Also substitute x = 2: both forms give −18, as the worked example shows.
The Rational Zero Theorem
  1. For f(x) = 2x3 + 3x2 − 8x + 3, check the Rational Zero Theorem’s conditions: the coefficients are integers and the constant 3 is nonzero. These conditions let us list every rational candidate.
  2. List the positive factors of the constant 3: 1 and 3. The Rational Zero Theorem puts these in the numerator because a reduced rational zero’s numerator divides the constant.
  3. List the positive factors of the leading coefficient 2: 1 and 2. The same theorem puts these in the denominator because a reduced rational zero’s denominator divides the leading coefficient.
  4. Pair every numerator with every denominator: 11, 31, 12, 32. Reduce fractions and remove duplicates, because different fractions can name the same input. Here the distinct values are 1, 3, 12, 32.
  5. Include both signs: ±1, ±3, ±12, ±32. The theorem allows positive and negative rational zeros. Report these as candidates, since the Factor Theorem requires an output of zero before any candidate becomes a zero.
  6. Check completeness: 2 numerators times 2 denominators give 4 distinct values and both signs give 8 candidates. To check the distinction, substitution gives f(1) = 0 but f(3) = 60. The list includes actual zeros and unsuccessful candidates.
Finding every zero, step by step
  1. For f(x) = x3 − 8x + 8, write coefficients 1, 0, −8, 8. Synthetic division needs the zero placeholder for x2. The nonzero constant 8 means x is not a factor.
  2. Use the Rational Zero Theorem to list ±1, ±2, ±4, ±8: factors of the constant 8 over factors of the leading coefficient 1. Every rational zero must be on this list.
  3. Test by substitution: f(1) = 1 and f(−1) = 15. Neither output is 0, so neither input is a zero. By the Factor Theorem, neither x − 1 nor x + 1 is a factor.
  4. Test 2 by synthetic division. Bring down 1; multiply by 2 and add to get 0 + 2 = 2, −8 + 4 = −4, and 8 − 8 = 0. The Remainder Theorem gives f(2) = 0, and the Factor Theorem gives f(x) = (x − 2)(x2 + 2x − 4).
  5. Set the quadratic factor equal to zero. The zero-product rule says each factor can supply zeros. Use the quadratic formula with a = 1, b = 2, c = −4: x = −2±202 = −1 ± 5. It solves the remaining factor without more candidate tests.
  6. Keep 2 from division and both values −1 + 5 and −1 − 5 from the formula. The zero-product rule makes this the full list because every factor has been solved.
  7. Check by expansion: (x − 2)(x2 + 2x − 4) = x3 − 8x + 8. Substituting either −1 ± 5 into x2 + 2x − 4 gives 0, and substituting 2 into x − 2 gives 0. Thus every listed input makes the original product zero.
The Fundamental Theorem of Algebra and complex conjugate pairs
  1. For f(x) = 2x3 − 3x2 + 8x + 5 with given zero 1 + 2i, read degree 3. The Fundamental Theorem of Algebra gives 3 zeros counted with repeats, so it sets the target count.
  2. All coefficients are real. Apply the complex conjugate pairs rule to add 1 − 2i. These two zeros leave one place; that zero must be real because a nonreal zero would need another partner.
  3. Use the Rational Zero Theorem to list ±1, ±5, ±12, ±52. The numerators divide 5 and the denominators divide 2. Test small candidates: f(1) = 12, f(−1) = −8, and f(12) = 172; none gives zero.
  4. Test −12 by synthetic division with 2, −3, 8, 5. Bring down 2, then multiply and add: −3 − 1 = −4, 8 + 2 = 10, and 5 − 5 = 0. The Remainder Theorem identifies the final 0 as f(−12). The other bottom entries give the quotient 2x2 − 4x + 10, and the Factor Theorem gives f(x) = (x + 12)(2x2 − 4x + 10).
  5. Collect −12, 1 + 2i and 1 − 2i. The Fundamental Theorem’s count is met and the nonreal pair is complete, so the search is finished.
  6. Check the quotient with the quadratic formula: x = 4±−644 = 4±8i4 = 1 ± 2i. Also substitute −12 into f to get −14 − 34 − 4 + 5 = 0. These checks recover the pair and verify the real zero.
Building a polynomial from its zeros
  1. Build the degree 3 polynomial with real coefficients, zeros 3 and 1 + 2i, and point (0, −30). The complex conjugate pairs rule adds 1 − 2i; the three zeros fill the required degree.
  2. Use the Factor Theorem to turn zero 3 into x − 3. For the pair, use the conjugate-factor rule: (x − 1)2 + 22 = x2 − 2x + 5. Multiplying conjugates removes i because i2 = −1.
  3. Write f(x) = a(x − 3)(x2 − 2x + 5), with a nonzero. The linear factorization rule allows this multiplier because multiplying by a nonzero number preserves the zeros.
  4. Use the given point to substitute x = 0 and f(x) = −30: −30 = a(−3)(5) = −15a. Divide both sides by −15 to get a = 2. The point fixes the multiplier left open by the zeros.
  5. Give the factored form 2(x − 3)(x2 − 2x + 5). The question also asks for standard form, so distribute and collect like powers: f(x) = 2x3 − 10x2 + 22x − 30.
  6. Check every condition. The degree is 3 and the coefficients are real. Synthetic division with input 3 gives remainder 0 and quotient 2x2 − 4x + 10; the quadratic formula gives its zeros 1 ± 2i. Finally f(0) = −30, so the zeros and point agree with the question.
Descartes' Rule of Signs
  1. For f(x) = x3 − 4x2 + x + 6, keep the terms in descending powers, as Descartes’ Rule of Signs requires. The constant 6 is nonzero, so 0 is not a zero to count separately.
  2. Read the signs +, −, +, +. There are 2 changes between neighbors. Descartes’ rule gives 2 or 0 positive real zeros, counting repeats, because the count can drop by an even number.
  3. Substitute −x for x to study negative zeros. The rule for powers of a negative flips only odd-power terms: f(−x) = −x3 − 4x2 − x + 6. The even-power term and constant keep their signs.
  4. Read −, −, −, +: one change. Apply Descartes’ rule to f(−x), giving exactly 1 negative real zero. Subtracting 2 would give a negative count, which is impossible.
  5. Use the Fundamental Theorem’s degree count of 3. The possibilities are 2 positive, 1 negative, 0 nonreal; or 0 positive, 1 negative, 2 nonreal. The complex conjugate pairs rule requires an even nonreal count.
  6. Check against the worked example’s factorization f(x) = (x + 1)(x2 − 5x + 6) = (x + 1)(x − 2)(x − 3). The Factor Theorem gives zeros −1, 2 and 3: one negative and two positive, matching the first possibility. This separate check finds the actual count; the sign rule alone gave the possibilities.
Traps
The Remainder Theorem

Wrong: divide by x + 6 with c = 6. Right: set x + 6 = 0, so c = −6.

The Factor Theorem

Wrong: turn the zero c into x + c. Right: use x − c and substitute c to check.

The Rational Zero Theorem

Wrong: leading factors over constant factors. Right: constant factors over leading factors.

Finding every zero, step by step

Wrong: keep testing the original polynomial. Right: test the quotient and keep every zero already found.

The Fundamental Theorem of Algebra and complex conjugate pairs

Wrong: count only distinct intercepts. Right: count real and nonreal zeros with multiplicity to the degree.

Building a polynomial from its zeros

Wrong: assume the multiplier is one. Right: use the given point to find it.

Descartes' Rule of Signs

Wrong: call the sign-change count exact. Right: list that count, then 2 less, then 4 less, stopping at 0 or 1.

Rational functions

  1. The reciprocal function and arrow notation
  2. The domain of a rational function
  3. Vertical asymptotes and holes
  4. Horizontal and slant asymptotes
  5. Intercepts of a rational function
  6. Graphing a rational function from its features
  7. Writing a rational function from its graph

The unit at a glance

Rules
The reciprocal function and arrow notation

The reciprocal function is f(x) = 1x. Its domain and its range are both (−∞, 0) ∪ (0, ∞): every real number except 0. Near zero: as x → 0+, f(x) → ∞, and as x → 0−, f(x) → −∞. Far away: as x → ∞, f(x) → 0, and as x → −∞, f(x) → 0. In arrow notation the arrow reads "approaches" or "goes to", a raised + means from the right, and a raised − means from the left.

The domain of a rational function

A rational function has the form f(x) = P(x)Q(x), where P(x) and Q(x) are polynomials and Q(x) is not the zero polynomial.
Domain of f: every real number x with Q(x) ≠ 0. Solve Q(x) = 0 on the original formula, before any canceling, and leave out each solution.

Vertical asymptotes and holes

Factor the top and the bottom and cancel every common factor. If x = a still makes the bottom zero after canceling, the line x = a is a vertical asymptote. If x = a makes the original bottom zero but no longer makes the simplified bottom zero, the graph has a hole (a removable discontinuity) at x = a, and the height of the hole is the value of the simplified formula at a.

Horizontal and slant asymptotes

For a top that is not the constant 0, compare the degree of the top with the degree of the bottom. Top degree < bottom degree: horizontal asymptote y = 0. Degrees equal: horizontal asymptote y = leadingcoefficientofthetopleadingcoefficientofthebottom. Top degree = bottom degree + 1: no horizontal asymptote, and the slant asymptote is y = the quotient of top ÷ bottom with the remainder dropped. Top degree bigger by 2 or more: neither.

Intercepts of a rational function

Let f(x) = p(x)q(x) be a rational function, where p(x) is the top and q(x) is the bottom.
y-intercept: the point (0, f(0)), when q(0) ≠ 0. When q(0) = 0 there is no y-intercept.
x-intercepts: every point (a, 0) where p(a) = 0 and q(a) ≠ 0. A zero of the top that also makes the bottom 0 is never an x-intercept.

Graphing a rational function from its features

For a top that is not the constant 0, split the x-axis at every x-intercept, every vertical asymptote and every hole. On each interval between neighboring split points, f(x) keeps one sign, so one test point tells whether the graph is above or below the x-axis there. The sketch is: dashed asymptotes, plotted intercepts, an open circle at each hole, one test point per interval, then smooth branches that never cross a vertical asymptote and, at the far left and far right, level toward the horizontal asymptote or slant asymptote. When the top's degree is two or more above the bottom's, there is neither, and the far ends follow the polynomial quotient that division gives.

Writing a rational function from its graph

The first candidate formula, with the simplest factors, for a graph that crosses the x-axis at x = p and x = q, has vertical asymptotes at x = r and x = s, and has a hole at x = c is f(x) = a · (x−p)(x−q)(x−c)(x−r)(x−s)(x−c) with a ≠ 0. With no hole, leave out both (x − c) factors. Find a by plugging in one more point of the graph that is not on the x-axis. If the graph goes the same way on both sides of a vertical asymptote, square that bottom factor, the simplest even power. If the graph touches the x-axis at an intercept and turns back, square that top factor. Check the candidate against the rest of the graph: a graph can call for higher powers or for factors with no real zero, such as x2 + 1.

Recipes
The reciprocal function and arrow notation
  1. Cross out x = 0. The division 1 ÷ 0 has no value, so the graph has no point on the y-axis.
  2. Plot three anchor points on the right: (12, 2), (1, 1) and (2, 12).
  3. Plot the matching points on the left by switching both signs: (−12, −2), (−1, −1) and (−2, −12). A negative input gives the same size of output with a minus sign.
  4. Near zero, test inputs closer and closer to 0 from each side. From the right the outputs climb without bound. From the left they drop without bound.
  5. Far away, test inputs of larger and larger size. The outputs close in on 0, from above on the right and from below on the left.
  6. Draw two separate smooth branches, one in Quadrant I and one in Quadrant III. Do not join them across x = 0.
  7. Write each trend in arrow notation: first where x heads, then where f(x) heads.
The domain of a rational function
  1. Say what is asked. 'Find the domain' means: list every input x that gives an output.
  2. Cover the top. Copy down only the bottom of the formula as it was given. Do not cancel anything first.
  3. Set the bottom equal to 0. This hunts for the inputs that would make the machine divide by 0.
  4. Solve that equation. If the bottom is a line, undo the adding and the multiplying. If it has x2 or higher, factor it and set each factor equal to 0.
  5. Plug each solution back into the original bottom and confirm that you get 0.
  6. Write the domain: all real numbers except those solutions. On a number line, put an open dot at each excluded number and write the pieces between them in interval notation, joined by ∪.
Vertical asymptotes and holes
  1. Factor the top and the bottom completely.
  2. Set the original bottom equal to 0 and solve. These are the inputs the function cannot take. Every break in the graph sits at one of them.
  3. Cancel every factor that appears in both the top and the bottom. Write the simplified formula, and keep a note of every input you excluded in step 2.
  4. Test each excluded input in the simplified bottom. If the bottom is still zero there, the line x = a is a vertical asymptote.
  5. If the simplified bottom is no longer zero there, the graph has a hole at x = a. Plug a into the simplified formula to get the height b, and write the hole as the point (a, b).
  6. Count. The vertical asymptotes and the holes together must account for every excluded input from step 2.
Horizontal and slant asymptotes
  1. Find the degree of the top and the degree of the bottom: the highest power of x in each. Write both numbers down. A top that is the constant 0 has no degree: that function is 0 wherever it is defined.
  2. If the top's degree is smaller, the horizontal asymptote is y = 0. Stop.
  3. If the degrees are equal, divide the leading coefficient of the top by the leading coefficient of the bottom, keeping both signs. That number is the height of the horizontal asymptote. Stop.
  4. If the top's degree is exactly one more, divide the top by the bottom with polynomial division. The quotient, without the remainder, is the slant asymptote.
  5. If the top's degree is two or more above the bottom's, report that there is no horizontal asymptote and no slant asymptote.
  6. As a consistency check, try a big input such as x = 100 or x = 1000; the output is usually close to the line you found. The degrees or the division decide the asymptote; the number only checks it.
Intercepts of a rational function
  1. Factor the top and the bottom. Use the original bottom to list the domain: every x except the ones that make the bottom 0.
  2. For the y-intercept, ask whether 0 is in the domain. If it is, compute f(0) and write the point (0, f(0)). If it is not, write: no y-intercept.
  3. For the x-intercepts, set the top equal to 0 and solve. These answers are the candidates.
  4. Test each candidate in the original bottom. Cross out any candidate that makes the bottom 0.
  5. Write each surviving candidate a as the point (a, 0).
  6. Check: put each surviving candidate into the original formula. You should get 0 over a number that is not 0.
Graphing a rational function from its features
  1. Factor the top and the bottom completely. Set the original bottom equal to 0 to find the inputs to throw out, and write the domain.
  2. Cancel any factor the top and bottom share. Each canceled factor (x − a) with no copy of it left in the bottom marks a hole at x = a: plug a into the simplified formula to get the hole's height, and plan an open circle there.
  3. Set the simplified bottom equal to 0. Each solution is a vertical asymptote. Draw a dashed vertical line at each one.
  4. Compare the degrees of top and bottom to get the horizontal asymptote, or divide when the top's degree is one more to get the slant asymptote. Draw it dashed.
  5. Find the intercepts: f(0) for the y-intercept when 0 is in the domain, and for the x-intercepts the zeros of the simplified top where the original bottom is not 0. Plot them.
  6. Mark every x-intercept, vertical asymptote and hole on the x-axis; with a top that is not the constant 0 there are finitely many. These split points cut the axis into intervals.
  7. Pick one test point inside each interval, plug it in, and plot the point. A positive output means that stretch is above the x-axis. A negative output means it is below.
  8. Draw each branch last: through its plotted points, climbing or diving beside each vertical asymptote on the side its test point says, and, at the far left and far right, leveling toward the horizontal or slant asymptote, or following the quotient from division when there is neither. Put the open circle at each hole.
  9. Check with one input very close to each vertical asymptote and one input far out, such as x = 100.
Writing a rational function from its graph
  1. Say what the question asks: build the fraction whose graph has exactly the features you see.
  2. List the x-intercepts. For a crossing at x = p, write the factor (x − p) on the top, and for a touch that turns back, (x − p)2. If there are no x-intercepts, try a top with no x in it, the simplest choice; the rest of the graph can still call for a factor with no real zero, such as x2 + 1.
  3. List the vertical asymptotes. For a wall at x = r, write the factor (x − r) on the bottom. If the graph goes the same way (both up or both down) on the two sides of the wall, write (x − r)2 instead.
  4. Look for a hole (an open circle). For a hole at x = c, write (x − c) on both the top and the bottom.
  5. Put an unknown number a in front of the fraction.
  6. Pick one point on the graph that is not on the x-axis and is not the hole. The y-intercept is usually the most convenient. Plug in its x and its y, then solve for a.
  7. Write the finished formula. Check it against a feature you did not use: the horizontal asymptote or a second point.
Traps
The reciprocal function and arrow notation

The most common mistake is running the two behaviors together: thinking a small input gives a small output, or writing "as x → 0, f(x) → 0". It is the reverse. Inputs near 0 give outputs far from 0, and inputs far from 0 give outputs near 0. Before you write any arrow statement, plug in one test number, such as 0.01 or 1000, and look at both the size and the sign of the answer.

The domain of a rational function

Canceling before you find the domain. f(x) = x2−1x−1 factors to (x−1)(x+1)x−1 and cancels to x + 1, which looks as if it accepts every number. But the original formula at x = 1 is 0 ÷ 0, which has no answer. The domain is still (−∞, 1) ∪ (1, ∞). Always solve bottom = 0 on the formula as it was given, and simplify only after that.

Vertical asymptotes and holes

The most common mistake is to stop at the domain: you find the zeros of the bottom and call every one of them a vertical asymptote. Some of them may be holes. Always factor and cancel first, then sort each excluded input by whether it still makes the simplified bottom zero. Still zero means a wall. No longer zero means a hole, with its height taken from the simplified formula.

Horizontal and slant asymptotes

Dividing the leading coefficients without first comparing the degrees. The ratio of leading coefficients is the horizontal asymptote only when the two degrees are equal. For 3x+1x2−4 the tempting answer y = 3 is wrong: the bottom is stronger, so the answer is y = 0. Write the two degrees down before you touch the coefficients.

Intercepts of a rational function

Keeping a zero of the top that also makes the bottom zero. For f(x) = x2−1x−1, the top is 0 at x = 1 and at x = −1. But x = 1 makes the bottom 0 too, so f(1) is 0 ÷ 0, which is undefined. The graph has a hole at (1, 2) there, and the only x-intercept is (−1, 0). Test every candidate in the original bottom before you call it an intercept.

Graphing a rational function from its features

The most common mistake is to plot a handful of points and join them all in one stroke, straight through a vertical asymptote. The function has no output at a vertical asymptote, so no part of the curve may pass through that dashed line. Draw every asymptote first, lift the pencil at each vertical one, and let the test point on each side decide whether that side climbs or dives.

Writing a rational function from its graph

Stopping after the factors. x−1x+2 has the right crossing and the right wall, but its graph passes through (0, −12) and levels off at y = 1. The graph in the example passes through (0, −1) and levels off at y = 2. Always write a in front and use a point to find it, even when a turns out to be 1.

Inverses and radical functions

  1. Why a quadratic needs its domain cut to have an inverse
  2. Finding the inverse of a quadratic on a cut domain
  3. Inverses of other polynomials
  4. Radical functions and their domains
  5. Inverses of rational functions
  6. A function and its inverse undo each other

The unit at a glance

Rules
Why a quadratic needs its domain cut to have an inverse

A quadratic f(x) = a(x − h)2 + k, with a ≠ 0, has its vertex at (h, k). On all real numbers it is not a one-to-one function, so it has no inverse function. On the restricted domain x ≥ h (the right half) or x ≤ h (the left half) it is a one-to-one function, so it has an inverse function. The range does not change: y ≥ k when a > 0, and y ≤ k when a < 0.

Finding the inverse of a quadratic on a cut domain

For f(x) = a(x − h)2 + k on the restricted domain x ≥ h, the inverse function is f⁻¹(x) = h + (x−k)÷a. On the restricted domain x ≤ h it is f⁻¹(x) = h − (x−k)÷a. The domain of f⁻¹ is the range of f, and the range of f⁻¹ is the restricted domain of f.

Inverses of other polynomials

A cubic of the form f(x) = a(x − h)3 + k, with a ≠ 0, is a one-to-one function on all real numbers, so it has an inverse function with no restricted domain. To find it: write y = f(x), swap x and y, and solve for y, using a cube root to undo the cube. A cube root has one value and takes no ± sign. The result is f−1(x) = ∛(x−ka) + h, with domain (−∞, ∞) and range (−∞, ∞).

Radical functions and their domains

Square root (and every even root): f(x) = ax+b gives a real number only when ax + b ≥ 0. Solve that inequality. Its solution is the domain.
Cube root (and every odd root): g(x) = ∛(ax + b) gives a real number for every x. Its domain is (−∞, ∞).

Inverses of rational functions

For f(x) = ax+bcx+d with c ≠ 0 and ad − bc ≠ 0, swap and solve gives f⁻¹(x) = −dx+bcx−a. Domain of f: x ≠ −dc. Range of f: y ≠ ac. Domain of f⁻¹ = range of f. Range of f⁻¹ = domain of f.

A function and its inverse undo each other

Two functions f and g are inverses of each other exactly when g(f(x)) = x for every x in the domain of f, and f(g(x)) = x for every x in the domain of g. Then g = f⁻¹, the domain of g is the range of f, the range of g is the domain of f, and the point (a, b) is on the graph of f exactly when (b, a) is on the graph of g. The two graphs are mirror images across the line y = x.

Recipes
Why a quadratic needs its domain cut to have an inverse
  1. Find the vertex (h, k). In the form a(x − h)2 + k, read it off, remembering that the sign inside the parentheses is the opposite of h. In the form ax2 + bx + c, compute h = −b2a, then k = f(h).
  2. Picture the vertical line x = h through the vertex. It splits the parabola into a left half and a right half that mirror each other.
  3. Choose one half. If the problem names a side, use that side. If it does not, keep the right half.
  4. Write the restricted domain: x ≥ h, which is [h, ∞), for the right half, or x ≤ h, which is (−∞, h], for the left half. The vertex stays in either way.
  5. Write the range. If a is positive the parabola opens up and the range is y ≥ k. If a is negative it opens down and the range is y ≤ k.
  6. Check with two inputs the same distance from h, such as h − 1 and h + 1. They give the same output, and only one of them is still allowed.
Finding the inverse of a quadratic on a cut domain
  1. Write y in place of f(x), and write the restricted domain (the cut domain) beside it as a note, for example x ≥ 3.
  2. Swap x and y everywhere: in the equation and in the note. The note x ≥ 3 becomes y ≥ 3, because y now stands for the old inputs.
  3. Solve for y. Undo the outside steps first, in backward order: the number added or subtracted, then the number multiplying, until the squared part stands alone.
  4. Take the square root of both sides and write ± in front of the root. Both signs are candidates at this point.
  5. Choose the sign by reading the note. If the note says y ≥ h, keep the plus sign. If it says y ≤ h, keep the minus sign.
  6. Finish getting y alone, then rename y as f⁻¹(x).
  7. State the domain of f⁻¹. It is the range of f: the outputs of f are the inputs of f⁻¹.
  8. Check with one number that is not the vertex. Put it through f, put the result through f⁻¹, and confirm you are back where you started.
Inverses of other polynomials
  1. Look at the shape. If x appears once, inside a single cube, the function is x3 shifted, stretched or flipped. It is one-to-one and needs no cut.
  2. Write y in place of f(x).
  3. Swap x and y. The equation now describes the inverse.
  4. Undo whatever sits outside the cube, last thing done first: move an added or subtracted number to the other side, then divide or multiply away the number in front.
  5. With the cube alone on its side, take the cube root of both sides. Write no ± sign.
  6. If anything is still attached to y, such as y − 2, undo it. That number lands outside the root.
  7. Rename y as f−1(x). State the domain and the range: both are all real numbers.
  8. Check with a number. Put an input into f, feed the output into f−1, and confirm that the input comes back.
Radical functions and their domains
  1. Find the root sign and name it: square root (even) or cube root (odd). These steps are for an inside of the form ax + b with a ≠ 0.
  2. If it is a cube root, stop: a cube root accepts every real number, so the domain is every real number, (−∞, ∞).
  3. If it is a square root, copy everything under the root sign and write: inside ≥ 0.
  4. Solve the inequality for x the way you solve an equation: undo the adding or subtracting first, then undo the multiplying. If you multiply or divide both sides by a negative number, flip the sign.
  5. Write the domain as an inequality and as an interval. When the root is not the bottom of a fraction, the endpoint gets a square bracket, because an inside of 0 is allowed: 0 = 0.
  6. Check with three numbers: the endpoint (the inside should be 0), one number in the domain (the inside should be positive), and one number outside it (the inside should be negative).
Inverses of rational functions
  1. Find the input f cannot take: set the bottom of f equal to 0 and solve. Leave that number out of the domain of f.
  2. Write y in place of f(x).
  3. Swap x and y everywhere.
  4. Multiply both sides by the whole bottom, written in brackets, so the fraction disappears.
  5. Distribute to remove the brackets.
  6. Gather: move every term that contains y to one side and every term without y to the other side.
  7. Factor y out of the side that holds it, so y appears once, times a bracket.
  8. Divide both sides by that bracket. Rename y as f⁻¹(x).
  9. Find the input f⁻¹ cannot take: set the bottom of f⁻¹ equal to 0 and solve. That number is left out of the domain of f⁻¹ and out of the range of f.
  10. Trade: the range of f⁻¹ is the domain of f from step 1.
  11. Check with one number: pick an input, run f, feed the output to f⁻¹, and confirm you get the input back.
A function and its inverse undo each other
  1. Write the domain beside each function, including any cut. The domains decide the last step of the check.
  2. Build f(g(x)): copy the rule of f, and wherever f has x, write the whole rule of g in parentheses.
  3. Tidy up. Squaring undoes a square root, cubing undoes a cube root, and opposite steps such as + 3 and − 3 cancel. The result must be exactly x, with nothing left over.
  4. Build g(f(x)) the same way, with the whole rule of f inside g, and tidy up.
  5. If a square root of a square appears, such as x2, write it as |x| first. Then use the domain to decide whether |x| is x or −x.
  6. If both orders give x, the two functions are inverses. Say where each result holds: f(g(x)) = x on the domain of g, and g(f(x)) = x on the domain of f.
  7. Check with a number. Pick an allowed input a, compute b = f(a), and confirm that g(b) = a. The points (a, b) and (b, a) are mirror images across y = x.
Traps
Why a quadratic needs its domain cut to have an inverse

Cutting at x = 0 out of habit. That works only when the vertex sits on the y-axis, as in x2 or x2 + 5. For (x − 4)2, the inputs 3 and 5 are both positive and both give 1, so x ≥ 0 fixes nothing. Find the vertex first, every time, and cut at its x value h.

Finding the inverse of a quadratic on a cut domain

Writing the plus root out of habit. The root step always produces ±, and the plus sign is right only when the right half of the parabola was kept. When the restricted domain is x ≤ h, the answer needs the minus sign. To avoid the mistake, carry the domain note through the swap, read it before you choose the sign, and test one number that is not the vertex.

Inverses of other polynomials

The most common mistake is carrying square root habits into cube roots: writing ± in front of the cube root, or cutting the domain as if the cubic were a parabola. A cube root has one value. 83 is 2 only, because (−2)3 is −8 and not 8. Before writing ±, ask whether the power being undone is even or odd. Only an even power loses the sign.

Radical functions and their domains

Writing x ≥ 0 out of habit. The condition belongs to the whole inside, not to x alone. For f(x) = 2x+6, the answer x ≥ 0 throws away every input from −3 up to, but not including, 0, and those inputs work: x = −1 gives 4 = 2. To avoid it, copy everything under the root sign first, write ≥ 0 after it, and only then solve.

Inverses of rational functions

After the fraction is cleared, y sits in two terms on opposite sides, as in xy − 3x = 2y + 1. The common mistake is to divide right away and write y = 2y+3x+1x. That is not solved, because y is still on the right. Gather every y term on one side first, factor y out, and only then divide.

A function and its inverse undo each other

Checking one order only, or dropping the domain. With f(x) = x2 on all real numbers and g(x) = x, the order f(g(x)) = (x)2 = x works, yet g(f(−3)) = 9 = 3, not −3. Always work both orders, write x2 as |x|, and write the domain beside each result.